Used Ari Vislanda Ks 12 for sale (24,257)

Condition: used, mileage: 231,000 km, power: 355 kW (482.67 HP), first registration: 07/2022, fuel type: diesel, empty load weight: 8,486 kg, maximum load weight: 10,514 kg, overall weight: 19,000 kg, axle configuration: 4x2, wheelbase: 4,000 mm, color: other, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, cruise control, differential lock, onboard computer, parking heater, Unladen weight: 8,486 kg, permissible gross weight: 19,000 kg, 1st axle: 315/60 R22.5, 2nd axle: 295/60 R22.5, fabric seats, air suspension front and rear, retarder, digital tachograph: VDO1c G2V1, fifth wheel coupling, electronic braking system (EBS), electronic stability program (ESP), automatic climate control, adaptive cruise control (ACC) + predictive cruise control (PCC), air-suspended driver's seat, armrest for driver/co-driver, driver's seat heating, LED headlights, cornering lights, radio, audio interface, sound system, lane departure warning system, power steering, adjustable steering column, electric windows, electric sunroof, fog lights, electric exterior mirrors, curb mirror, wide-angle mirror, central locking, sun visor, twin tyres, refrigerator, work lights, ambient lighting, hill start assist, cup holder, information and service system, speed limiter: 90 km/h, foldable passenger seat, upper and lower bunks, suspended cab, vehicle location: 90518 Altdorf near Nuremberg. Subject to errors and changes. Redpfx Ajy A Awkjfnet

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). We have used this machine in our workshop to drill wooden fence profiles. It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. Rjdpfx Afsywtxbsnet This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Further videos and technical data about this machine series can be found at the following link: ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html The machine's operating manual is of course still available.

Condition: used, mileage: 217,170 km, power: 130 kW (176.75 HP), first registration: 02/2010, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 05/2028, color: orange, gearing type: mechanical, emission class: euro5, Year of construction: 2010, Internal vehicle no.: G300103 German vehicle On our lot in Kaufungen - Kassel, immediately available More INFO at: * Luis Lucena (German, English, Spanish, French) *Viktoria Sologubova (Polish, Russian, Ukrainian, English) VIDEO: Sewer cleaner with 2,875 operating hours Rockstroh Dran Jet 100 Year of construction 2010 Pump performance 91l/min - 150 bar 115l/min - 120bar 128l/min - 160 bar* 120l/min - 180 bar* 106 l/min - 200 bar* 92 l/min - 210 bar* *only for vans High-pressure system half-side positioned high-pressure unit safety, overflow, and pressure control valve, 1.5" water filter Pump drive PTO vehicle drive (van) hydraulic (van or box body) Hose reels 1 x 80/100/120m DN10/13 1 x 80m DN16/19 1 x 40m water filling reel 3/4" Financing example: * Internal number: G300103 * Purchase price: 29,900.00 € * Down payment: 10% * Term: 60 months * Monthly payment: 468.31 € Residual value: 5,980.00 € If you like this offer or want to adapt it to your needs, contact us (Mr. Enchev). We look forward to your call Errors excepted Rjdpfxsv Rt T He Afnet We are happy to accept your used vehicle as trade-in. Financing directly with us is possible. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ----.

Condition: new, table length 1200 mm table width 800 mm table height 980 mm weight of the machine ca. 0.95 t Workstation Rodpfx Afsyv I Inenot - Hole diameter: 28 mm - Grid: 100 x 100 mm - Side panels: 150 mm - Panel thickness: 10 mm

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. To be positioned on a motorised roller conveyor following a drilling machine, a double-sided edge bander or double-end tenoner - Top cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.19 - Bottom cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.19 Rjdpoyw Rnyofx Afnst - Max useful working width mm 3500

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Ks Kesmak KME 350 Rsdpoy H Rbfofx Afnjt Shaft cutting diameter: 350 mm Square: 340 x 340 mm Rectangle: 340 x 415 mm Hydraulic control of the bandsaw arm Hydraulic control of the vise Hydraulic blade tension sensor PLC controller Mechanical feed with rollers in the vise Electronic setting of cut part length and quantity Feed cycle up to 6000 mm, any length and quantity Membrane control panel Bundle cutting possible (upper clamp) Stepless blade speed adjustment: 20-120 m/min Roller feeder 1200 mm Documentation Year 2024

Condition: used, Year of construction: 1998, pressure 160 t stroke 30 - 90 mm no. of strokes 50 - 300 /min distance between columns 1270 mm dayligth (stroke and adjustment up) 590 mm column travel -side 440 mm table surface area 1250 x 900 mm hole in the table 950 x 300 mm ram surface 1250 x 800 mm Rsdpfjvut Uxsx Afnst ram adjustment 100 mm material width 200 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 64,5 kW Weight 21,00 t dimensions of the machine ca. 3,0 x 2,2 x 3,9 mxmxm permitted for automatic mode according to the CE-Norm with infinitely variable drive, hydraulic clutch/brake combination (make Desch), automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800

Condition: good (used), Screws, grub screws, for Bosch profile, construction profile, aluminum profile, aluminum T-slot profile, T-nut - Grub screws: Hex socket set screws with pin, 30 pieces Rodpfsymbixjx Afnst -Thread: M12 left -Price/Quantity: 30 pieces -Price: 6 euros net for 30 pieces -Number: 4000 pieces in total -Transport dimensions: 600/400/H200 mm -Weight: 58 kg

Condition: new, mileage: 18 km, power: 189 kW (256.97 HP), fuel type: diesel, brakes: retarder, color: white, gearing type: automatic, Equipment: ABS, electronic stability program (ESP), FA XB 260 12t without bodywork * Local transport driver’s cab * Green-tinted windows * Side and rear not glazed * 5 mirrors * Electrically adjustable mirrors * Central locking, 2 keys, 2 remote controls * Front mirror * Mirror brackets, for bodies 2.50 - 2.60 m * Headlights adjusted for left-hand traffic * Reversing camera * Halogen headlights * Daytime running lights * Mechanical cab suspension * Sun visor outside, green and translucent * Fog lights * Chassis color anthracite grey * Cab steps and mudguards in Stone Grey * Traffic white * Headlight frames and bumper in cab color * Left-hand drive * Soft-grip steering wheel, black * Seat belts black * Passenger seat: Fixed, velour * Engine tunnel storage compartment * Air conditioning * Electric window regulators * Converter 24 V to 12 V, 15 A, 180 W * Pneumatic steering column lock * Driver seat: Air-suspended luxury seat * Driver seat armrest * Digital tachograph, VDO 1C, Version G2V2 * Pre-installed for toll system * Speed limiter setting 85 km/h nominal * DAF Connect * Antennas: AM/FM + GSM + GPS * FMS interface, prepared * DAF Infotainment System: DAB radio with speakers * Driver Performance Assistant * Adaptive cruise control with FCW and AEBS-3 * Reversing warning system * Basic immobilizer * Hill start assist * DAF Side and Turn Assist * Alcohol interlock prepared * Speed limit recognition * DAF Drowsiness Detection * Lane change warning system * Electronic Stability Control (VSC) * Airbag (driver) and 2 belt tensioners * Manual master switch * Front: 4.50 t, parabolic, F48 * Front axle 1, 4,240 kg, load index 134 * Rear axle 1, 7,600 kg, load index 130 * Rear: 8.50 t, air suspension, SR8.22 * Wheel trim rings silver-grey * Goodyear * Tire pressure monitoring system * Front axle(s): 245/70R17.5 * Driven rear axle(s): 245/70R17.5 * Steel disc wheels, silver-grey * F1, 245/70R17.5 GO KMAXS 136/134 M Steering DBA * R1, 245/70R17.5 GO KMAXD 136/134 M Traction DBA * RR, not applicable * Rear axle ratio 3.73 * Emission standard Euro 6 * Traction control (ASR) * PowerLine automatic transmission, 8-speed * Mechanical differential lock * 8-speed PowerLine 8AP1000 overdrive transmission, 4.89-0.64 * Engine PX-7, 189 kW/257 hp. Cab emblem: 260 * Parking brake control * Exhaust brake * Wheelbase 6.10 m / rear overhang 2.65 m * Front underrun protection * Splash guards * AdBlue® tank 30 l, right chassis side * Fuel tank left side * AdBlue® filler cap without lock * Rear lights with bulbs * Battery box left, no spare wheel holder * Longitudinal members 210/6.0 mm, without inner reinforcement * EAS unit right, discharge right rearward * Plastic fuel tank, 110 l * Standard component layout * One wheel chock * Designed as a solo vehicle, no trailer * Rear end crossmember * Fixed connector, front of cab * Body connector on chassis * Side marker lights * Tail lift application * Body mounting BAM 1, loose brackets * Alternator 100 A, batteries 2 x 175 Ah * Max. permissible chassis weight 11,990 kg Rjdewwfbuspfx Afnet * Max. permissible drive train weight equals chassis max * Maximum ambient temperature 38 degrees * Cold climate * Heated water separator * Standard noise level * Top air intake, behind cab * ITS service * Warranty Plus Vehicle 3 years – 200,000 km Vehicle has a day registration from 03.12.2025 Vehicle ha

Condition: ready for operation (used), Year of construction: 2018, operating hours: 1,336 h, functionality: fully functional, Arizona 1280GT flatbed printer Purchased new from Canon in 2019. The printer is in full working condition and can be demonstrated in operation. It will be available within 2 months. Covered by a maintenance contract with Canon. White inks can be replaced if required. 125 cm (W) x 250 cm (L) x 48 mm (thickness) Edge-to-edge (full bleed) printing True flatbed with vacuum table for securing rigid media or objects True roll-to-roll printing (with Roll Media Option) Variable droplet sizes from 6 to 42 picolitres. The ability to reduce drop size to 6 picolitres enables sharp images with smoother gradients and quarter-tones. The capability to jet larger droplets up to 42 picolitres ensures uniform color fills. The result is near-photographic print quality, with sharpness previously only seen at 1,440 dpi resolutions or higher. Text as small as 2 pt. is perfectly legible (with High Definition mode). Redpfxsyrn H Ue Afnjt Transport, assembly and disassembly are the responsibility and risk of the buyer. The machine is 100% operational.

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Holp VarioBucket / VL.112.421 / incl. rotary drive / RotoTop 121 / MS08 / HARDOX / NEW / in stock & immediately available Price: €12,565.00 net / €14,952.35 gross - Excavator size: 7 t – 14 t - Own weight approx.: 460 kg - SAE capacity: 400 liters - Slope angle: 54 ° - Ditch bottom radius: 150 mm - Includes Holp RotoTop 121 rotary drive - The bucket is made entirely of HARDOX. Advantages of the Holp VarioBucket: - Large surface area - Robust design with high-quality materials - Minimal weight due to optimized triangular structure - Rounded bottom - Two working openings - Rectangular working opening - V-shaped - The VarioBucket stands out for its high performance and clean operation. Its V-shaped opening allows precise discharge, and it delivers excellent ditch clearing performance when pulled. Wherever greater speed and flexibility are required for varied tasks, the VarioBucket is a real asset on site: it is faster, more adaptable, and safer. We have a large number of other Holp products in stock and immediately available! Mr. Herden (Tel. ...) will gladly assist you. We will also be happy to provide you with a financing offer upon request. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Rjdjyhymcepfx Afnst In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the full Holp range! Errors and prior sale excepted! = Further information = New: Yes Application: Construction Unladen weight: 460 kg Please contact Marius Herden for more information.

Condition: used, Year of construction: 2000, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm Photo of machine already delivered in similar scope: -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 Rjdoxzk Nijpfx Afnet C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS MARPOSS gate sensor Measuring control MARPOSS Minialsar prepared Paper belt filter

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) Redpjuxfu Njfx Afnot - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, mileage: 181,788 km, power: 110 kW (149.56 HP), first registration: 04/2000, fuel type: diesel, empty load weight: 5,750 kg, maximum load weight: 249 kg, overall weight: 5,999 kg, axle configuration: 4x2, brakes: engine braking, driver cabin: other, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 6, Equipment: cabin, differential lock, * German vehicle * Condition as shown in pictures * Ruthmann aerial work platform * Type K 120 * 12 m working height * 7.05 m lateral outreach * Only 8,813 operating hours * Work basket with 200 kg load capacity Rodpfex N Tnmex Afnst * Work basket insulated for 1,000 V * 180° rotation angle * Work basket dimensions: 1.30 m x 1.00 m * Dual hydraulic outriggers * Vehicle total height: 3.55 m * 6 seats * Amber beacon lights * 5-speed gearbox * Roof hatch * Aluminium checker plate cladding * Loading area: 1.80 m x 2.45 m * Aluminium side panels * Emergency controls * Wheelbase: 3.80 m * Gross vehicle weight: 5,990 kg * Self-propelled work machine thus unrestricted access in all environmental zones If a new TÜV inspection is required, we will be happy to provide an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, no new DGUV test, no new SP, and no new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspection of the goods to avoid any misunderstandings regarding condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired. All information provided is without guarantee. No liability is accepted for errors or incorrect information in this offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: excellent (used), For sale: Professional measuring set from the Japanese company Mitutoyo, model SBM-25CXST (cat. no. 568-925). This set is designed for precision measurement of hole diameters and cylindrical parts in the range from 12 to 25 mm. Set contents: Mitutoyo ABSOLUTE Digimatic digital bore gauge with LCD display; Three measuring heads: 12–16 mm, 16–20 mm, 20–25 mm; Setting rings: Mitutoyo 19.997 mm and HK66 19.001 mm; Extension rods and additional accessories; Original Mitutoyo wooden case with custom foam insert. The ABSOLUTE system ensures stable measurements and no need for re-zeroing every time the device is switched on. Digital readout provides quick and reliable measurements with high accuracy. The set is in very good condition, complete and ready for use. Ideal for measurement laboratories, quality control, and tool workshops. Rjdpfxjw R E Hvo Afnst

Condition: good (used), Height gauge, parallel gauge, height measuring device, height measuring and marking device, height marker -Manufacturer: KS Lenze, height gauge type C500-23 Redpfx Afjyik H Aenst -Max. working height: 520 mm -Number: 2x height gauges available -Price: per piece -Dimensions: 240/175/H575 mm -Weight: 7 kg/pc.

Condition: excellent (used), I am offering a professional LUKAS LZR 12/550 hydraulic rescue cylinder, used by fire brigades and in technical rescue operations. Rsdsyxtabjpfx Afnst This equipment is from the renowned German brand LUKAS, designed for rescue work during road accidents and technical operations – very robust and durable construction. Condition: The item is used. Normal signs of use are visible (scuffs, worn label – see photos). Technical condition is unknown – sold as untested / for inspection. Technical data (from markings): Model: LZR 12/550 Manufacturer: LUKAS (Germany) Type: hydraulic cylinder / spreader Application: technical rescue, hydraulic power Equipped with working tips Set includes: LUKAS LZR 12/550 hydraulic cylinder Mounting element as shown in the photos Applications: Fire brigades (voluntary and state) Road rescue operations Technical and maintenance work Can also be used in hydraulic power applications.

Condition: used, Year of construction: 1992, saw blade diameter 1250 mm Rjdpfx Afsyqu Rdjnet cutting diameter 380 mm cutting range 480x320 mm motor speeds: 3000 U/min feed speeds 1000 mm/min main drive motor 112 kW cutting speed 10-265 m/min total power requirement 125 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, mileage: 285,000 km, power: 170 kW (231.14 HP), first registration: 07/2016, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2026, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,150 mm, loading space length: 56,869 mm, loading space width: 2,460 mm, loading space height: 1,949 mm, Equipment: ABS, electronic stability program (ESP), soot filter, Reverse warning system, leaf-air suspension, engine brake, external temperature display, differential lock, air brake, disc brake, sun visor, roof hatch, air-suspended driver's seat, heated exterior mirrors, electric exterior mirrors, trailer coupling pre-installation, tachograph, underride protection, twin tires, compressed air brake system, used vehicle. Vehicle no. 3265, Electronic Brake System with ABS and ASR, ESP, rear axle differential lock, wheelbase 4,220 mm, driver comfort suspension seat, ClassicSpace, sun visor, roof hatch, electric windows, electric mirrors, Mercedes PowerShift 3 automatic transmission, leaf-air suspension, 120L diesel tank, 25L AdBlue, lane departure warning system, Active Brake Assist, EURO 6, high-performance engine brake, reverse warning system, reversing camera, tires: 245/70 R17.5, LED lighting package, trailer coupling pre-installation (air and electrical connections), Zikun swing wall body left and right, rear portal doors, wooden loading floor, cargo area (LxWxH): 5,869 x 2,460 x 1,949 mm, 1st owner, full service history, unladen weight: 6,050 kg, permitted total weight: 11,990 kg. For inquiries, please note: Errors and prior sale excepted. Redpfx Afoyxbw Uenet

Condition: used, mileage: 60,784 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, first registration: 12/2002, emission class: euro3, color: white, brakes: retarder, number of seats: 11, Year of construction: 2002, Equipment: ABS, parking heater, Beautiful MB Vario 814D from official ownership / state police: +++ Bodywork thoroughly refurbished and partially repainted on the lower sections +++ Version configured as a bus (group transport vehicle) MR / high-roof with auxiliary heating, driver airbag, ABS, and differential lock on the rear axle, as well as a retarder. The retarder is an electric, wear-free eddy current brake for speed adjustment. The bodywork was professionally repaired and then the rear section was partially repainted in our own workshop. We disassemble the vehicles beforehand and, for example, permanently seal the body seams with elastic material after painting. The chassis/frame of this Vario was also partially de-rusted and painted by us, and finally protected with wax for long-term preservation. Additionally, this Vario received a fresh inspection, including engine oil and brake fluid change, all four batteries replaced, and a new air dryer for the braking system. Furthermore, the plastic glazing in the cab was replaced with genuine glass. Due to their good insulating properties, the plastic windows were retained in the rear section. An ideal base for a spacious motorhome — the technical conversion to "So-KFZ Wohnmobil" registration (special-purpose vehicle/motorhome) can be carried out for you for an extra charge of €600. In this context, the vehicle would also receive an exterior 220V power connection with RCD/FI circuit breaker and two interior sockets. General information about the MB Vario 814D: The auxiliary heating works very efficiently: Rodpfx Aoyxuv Defnjt This is a hot water circulation heating system with convectors in the passenger compartment for draft-free heating. Top speed thanks to long axle ratio: according to paperwork, vmax 120 km/h. Total of 11 seats; the passenger compartment seats are comfortable recliners — with adjustable backrests and armrests. In addition, the left inner seats can be shifted about 10 cm into the aisle for more freedom of movement. There are three effective roof hatches in total. Interior dimensions from the driver’s seat: 4000 x 1850 x 1900 mm (L x W x H) +++ Subject to error, changes, and prior sale +++

Year of construction: 2000, condition: refurbished (used), machine/vehicle number: 19018, KREYENBORG DOUBLE SCREEN CHANGER K-SWE-101/121/RS Year of construction 07.2000 Rsdeufgfgspfx Afnjt With accessories: Various perforated disks, sieves etc. The screen changer was overhauled by NORDSON General for € 18,000 Application: 2-layer extrusion or single operation

Condition: used, mileage: 314,337 km, power: 330 kW (448.67 HP), first registration: 03/2022, fuel type: diesel, number of seats: 52, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, Year of construction: 2022, Equipment: ABS, air conditioning, cruise control, navigation system, = Additional Options and Accessories = - DVD - Front refrigerator - Retarder - Sleeper cab - Toilet - USB connections - USB connections - Webasto heater = Further Information = Height: 400 cm Damage: none = Company Information = Redpfx Aoxzd H Isfnjt We are an international company based in Belgium, near Brussels (+/-20 km). Belgian Bus Sales is your ideal partner for buying and selling used buses and offers an extensive lot serving as a display area. We always have a wide range of buses of all brands, capacities, models, and in every price category in stock. We can find the right coach, school bus or city bus for you, tailored to your needs or budget. All information without guarantee. Subject to errors, prior sale and typographical mistakes. Opening hours for used bus viewing: Mon-Fri: 08:30-12:00, 12:30-17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: ready for operation (used), Year of construction: 2016, load capacity: 1,400 kg, Glaslift KS Robot 1400 Year of manufacture: 2016 Rsdpfx Afoyir Azsnst Width: 1310 mm Length: 3350 mm Height: 1700 mm Max. lifting capacity: 1400 kg With radio remote control DGUV inspection valid until July 2025 This offer is exclusively intended for commercial customers as defined by §14 BGB.

Condition: used, Year of construction: 2018, Overview  This isobaric filler was manufactured in 2018 by the German company Leibinger, with the labelling system added in 2020 by ENOS. The system consists of a 12-head isobaric filler with 4-head crown capper, an ENOS C5000 labellier, and auxiliary equipment for packaging. It is designed for beer and other carbonated beverages and offers a complete solution from filling to labelling and carton sealing. The machines are immediately available. Technical data  Leibinger Filling and Capping Machine (2018) Capacity: Up to 3,000 bottles/hour (330 ml) Filling system: 12 counterpressure long-tube valves Capping system: 4-head crown capper (26 mm) Bottle format: 0.33 L (prepared) Working pressure: 2.0 – 2.2 bar Working temperature: 0 – 4 °C (optimal) Oxygen pickup: 10–12 ppb dissolved oxygen Vacuum system: Integrated CO₂ pre-evacuation and vacuum pump Product pump: Included CIP system: Automatic and programmable Machine direction: Left to right Construction: AISI 316L stainless steel Electrical requirements: 400 V / 3PH+N+PE / 16 A / 50 Hz ENOS C5000 Labelling Line (2020) Capacity: 2,000 – 6,000 bph Bottle formats: Cylindrical bottles, max. height 185 mm, max. length 300 mm Labelling stations: 1 (option for second station) Label type: Self-adhesive (also supports polypropylene labels) Bottle infeed: Screw conveyor system Sensors: Self-adjusting photocell for transparent labels Control system: Processor board with inverter-based speed regulation Output system: Smoothing unit with adjustable perforated belt Transport system: 1.5 m conveyor with traction motor Rotary tables: 1 infeed + 1 outfeed, both motorized Electrical control: 3 inverters (for conveyors, labeller, and filler) BEA C26U Semi-Automatic Carton Sealer Function: Seals top and bottom of cartons Adjustments: Width and height adjustable Conveyor: Plastic rollers, 1.5 – 4.5 m   Rodpfeyb S S Hjx Afnot

Condition: new, total length: 2,440 mm, total width: 590 mm, total height: 12 mm, We offer you OSB boards as Grade II selection. Redpfx Afsxxrhnjnst (The boards are only sold in packages. Individual boards cannot be purchased.) Scope of delivery includes: - OSB boards, Grade II - Article number: OSB10 - Total length: 2,440 mm - Total width: 590 mm - Thickness: 12 mm - Board size in m²: approx. 1.44 m² - Total m² per package: approx. 216 m² - Design: with tongue and groove - Quantity per package: 150 pieces - Base price per m²: €5.04 Note: This is a special lot of Grade II boards; the OSB boards may show damages. Your contacts in our company: Mr. Falk Deutsch Mr. Mario Klöver Mr. Andre Evering General information about this item: This item is available for collection only. If transport or shipping of this item is required, it will incur additional costs, which can be requested from us individually depending on the place of delivery and the required quantity.