Used Airo X14 En | 2017 for sale (16,548)

Year of construction: 2017, condition: used, offer consists of: Hjdjzwlzljpfx Ac Tst short delivery unit SC-200 - weight: 18kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. Hsdpfx Ajzuzw Dec Tjt HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, - 4 belt grinding units - Frequency control for all units - Electronic grinding pressure control Universal edge and profile grinding machine Manufacturer: Heesemann Type: UKP 20 Year of manufacture: 2017 Technical data Workpiece transport system - Total length: 5015 mm - Driven by a 1.5 kW three-phase motor with a double chain for workpiece transport - Feed rate in the range of 5-25 m/min, frequency-controlled - Working height constant at 880 mm - incl. integrated control cabinets - incl. adjustable guide rail with digital display and incl. counter rail with central width adjustment 4 lateral guide rollers between the grinding units for secure transport of workpieces Industrial PC 10.4" - LCD-TFT color display - Touch screen version - with display for production and downtime - with program memory for 100 programs 2 belt grinding units "M 4" Pos. 1 and 2 - for grinding straight edges - Belt dimensions: 2300x80 mm - Belt speed: 0.7-12 m/s - Motor power: 3.0 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 2 oscillation units for "M4" (Pos. 1+2) For complete utilization of the grinding belt 2 belt grinding units "K 4" Pos. 3 and 4 Hjdpfx Aozuzb Aec Tjt - for grinding small profile sections - can also be used for edge breaking - Can be swiveled 90 degrees upwards and 45 degrees downwards - Belt tear switch - Tool holder with quick-change device - Intermittent belt extraction device - Belt dimension: 2000x50 mm - Belt speed: 0.5-8 m/s - Motor power: 1.1 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 4 electronic control units - for the fully automatic timing of the lowering and raising of the grinding tool, depending on the set feed rate, the grinding pressure and the unit angle setting Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: SCM Type: Olimpic K360 T-ER1 Year of manufacture: 2017 Technical data - Feed speed: 11 m/min - Edge thickness: 0.4 - 6 mm - Control: SCM control panel with display - Board thickness: 8 - 60 mm - Power supply: 400 V / 3~ / 50 Hz, 23 A - Min. workpiece: 140 x 90 mm Units Pre-milling - 2 counter-rotating diamond heads (up to 3 mm removal) EVA gluing unit Pressure zone with driven roller + 2 pressure rollers End trimming unit K-2 (straight / beveled, automatic switching) Flush trimming - flush, radius, chamfer Corner rounding R1/R2 Profile + surface scraper blade Polishing unit Anti-adhesive liquid system (2 liquids), edge roller feed Hjdpfx Acozuyk No Tot Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Homag Type: Optimat KDF 440 C Hedpfx Aszuykcsc Tet Year of manufacture: 2017 Technical data Workpiece thickness: 8 - 60 mm Edge material: 0.4 - 8 mm (depending on the equipment) Feed rate: 8 - 18 m/min (stepless) Workpiece length min. approx. 120 mm Workpiece width min. approx. 60 mm Glue application EVA hot melt adhesive, optionally PUR-compatible Glue reservoir Teflon-coated, quick-change system possible Total connected load approx. 15 - 20 kW (depending on the equipment) Compressed air requirement: 6 - 7 bar Machine weight: approx. 3,000 - 3,800 kg Control system: powerControl / powerTouch CE marking Equipment: Joint milling Glue application Pressure zone Cut-off saw unit Milling unit top/bottom Corner rounding unit Scraping blade unit Edge finishing unit Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Biesse Type: Jade 240 Year of manufacture: 2017 Technical data Hjdpfx Acezuyixj Tst Note: [b]The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.[/i]

Condition: used, Year of construction: 2017, operating hours: 9,370 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X-axis working area: 3000 mm - Y-axis working area: 1550 mm - Z-axis clearance: 150 mm Main Spindle - 5-axis electric spindle - 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Speed range: 1,000 - 24,000 rpm - Ceramic bearings - Liquid-cooled spindle - Clockwise/counterclockwise rotation - Integrated tool changer interface - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System Linear Tool Changer - 12-position - Interface for tool holders - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm Disc Tool Changer - 18-position - Mounted on the traversing portal - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Circular Saw Blade Changer - Maximum saw blade diameter: 350 mm Drilling Unit DH18 6H 2S Drilling Head - 12 vertical spindles: 7 in the X-direction, 5 in the Y-direction - 6 horizontal spindles: 4 in the X-direction, 2 in the Y-direction - Drilling stroke: 70 mm - Maximum drill length: 70 mm - Tool holder diameter: 10 mm - Individual drive for each spindle Dadoing Saws - 2 dado saw blades: 1 in the X-axis, 1 in the Y-axis - Maximum saw blade diameter: 120 mm - Maximum saw blade thickness: 5 mm - Speed adjustable up to 6,000 rpm Vacuum and Clamping System Console Table - 6 consoles - Front and rear programmable stops - Wireless dual-circuit vacuum system - Height of vacuum suction cups: 100 mm - Pneumatic console locking - 4 adjustable side stops - Additional support arms Vacuum Pump Flow Rate: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz Additional Vacuum Equipment Hodpfszuw H Isx Ac Tot - Vacuum connection for template machining (left side) - Additional vacuum connection for template milling (right side) - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air control for all consoles WoodFlash Software Package Control Panel - Complete machine control - Loading and execution of programs - Tool and machining management - Sensor monitoring - Manual machine commands Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB port Handheld Control for Feedrate Control - Feedrate override - Emergency stop button - Manual feedrate adjustment during machining Safety Devices - CE safety system - Light curtain safety system - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Vacuum and compressed air sensors - Additional safety mat system Operating Hours: 9370 hours

Condition: used, Year of construction: 2017, The BIESSE ROVER A 1643 EDGE is a comprehensively equipped CNC machining center with a 5-axis machining head and an integrated edge banding unit. Working area, X-axis: 4,320 mm Swing machining in X: 1,620 mm Working area, Y-axis: approx. 1,580-1,660 mm Travel, Z-axis: 180 mm Edge banding Working area, X-axis: 3,300 mm Working area, Y-axis: 1,540 mm Maximum loading width in Y: 1,900 mm, expandable to up to 2,100 mm 5-axis unit 5-axis machining head C-axis: continuous 360° rotation B-axis: continuous 360° rotation B-axis speed: 18 rpm C-axis speed: 18 rpm Maximum spindle speed: 24,000 rpm Power 11 kW in S1 operation 13 kW in S6 operation Additional features Maximum undercut angle: -10° Collision monitoring for the 5-axis unit Prepared for the use of attachments on the 5-axis unit Work table and clamping system ATS work table 8 support rails 32 adjustable consoles 32 pneumatic vacuum cups Vacuum cups adjustable in 15 steps Pneumatic system divided into 2 working zones along the X-axis Vacuum system Vacuum pump capacity: 250 m³/h Additional equipment 6 lifting bars for easier loading and unloading 28 sensors for detecting lowered stops Stops and positioning 8 rear stops 8 center stops 4 side stops (2 left + 2 right) 2 additional side stops 4 removable center stops (2 left + 2 right) 2 additional center stops Pneumatic positioning and lowering of the stops Drilling unit BH 24L drilling head 13 independent vertical spindles 5 independent horizontal spindles Grooving saw, 120 mm Maximum groove depth: 25 mm Programmable spindle speed up to 6,000 rpm Tool changer 16-position rotary magazine Mounted on the X-axis carriage For tools and attachments Capacities Maximum tool/attachment weight: 7.5 kg Maximum total load of the magazine: 55 kg Edge banding unit GU60A edge banding unit For workpieces up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue pot with hot melt system Edge heating lamp, 600 W CNC-controlled edge feeding system Automatic edge trimming Sensor for closed geometric shapes Accessories for edge machining Edge magazine 2-roller edge magazine mounted on the X-axis carriage Maximum roller diameter: 800 mm Maximum edge height: 65 mm Additional units Rounding tool 85 mm, HSK F63 Saw unit HSK F63 for cuts and grooves Maximum saw blade diameter: 215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with a 215 mm saw blade: 68 mm Hsdpfx Aszuwyzec Tot Post-processing Combined glue joint and edge trimming blade units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment Import of DXF, CIX and BPP files 3D machine simulation Tool management Management of 5-axis machining through positioning Assistant-supported program creation

Condition: used, Technical Specifications Hodpfx Acezutq Ae Tjt - Working range of the X-axis: 3,260 mm - Working range of the Y-axis: 1,260 mm - Working range of the Z-axis: 165 mm - Machine design: Gantry - Tool magazine capacity: 16 positions - Power of the electric spindle: 19 kW - Total power consumption: 20 kW

Condition: excellent (used), power: 115 kW (156.36 HP), fuel type: diesel, color: orange, first registration: 07/2013, Year of construction: 2012, operating hours: 15,109 h, Equipment: air conditioning, General information Model year: 2012 Serial number: DCH210R5NCEAH2500 Technical information Number of cylinders: 4 Hsdpsy En Ndefx Ac Tjt Empty weight: 22.600 kg Functional Working width: 300 cm Number of valves: 4 CE mark: yes Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Warranty Warranty: From first owner, with full maintenance records, ready to work! - 80% undercarriage - 3 buckets included: 1300mm, 450mm, and 2000mm cleaning bucket - Optionally with 2021 TOPCON 3D SYSTEM Additional information Please contact Ernst van Hek for more information = Additional options and accessories = - 3rd valve - 4rd valve - Central lubrication - Central lubrication system - Climate control - Heater - Radio/CD player - Rotating beacon - Spotlight front - Spotlight rear = Remarks = Case CX210B Tracked Excavator (2012 / First use July 2013) Hours: 15,109 hrs | Weight: 22,600 kg Engine: Isuzu 4HK1X (117.3 kW / 157 HP) Undercarriage: 80% remaining Buckets: 1300mm bucket with teeth, 450mm trench bucket with teeth, 2000mm cleaning bucket Features: Air conditioning, central greasing system Condition: Directly from first owner, including full maintenance history!

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 3,266 h, load capacity: 1,400 kg, lifting height: 8,600 mm, free lift: 2,840 mm, fuel type: electric, mast type: triplex, construction height: 3,400 mm, fork length: 1,150 mm, drive type: Elektro, Reach Truck Load center: 600 mm Mast type: Triplex Condition: Refurbished without warranty Technical condition: Very good Front tires type: Vulkollan Front tires condition: 80 - 100% Rear tires type: Vulkollan Hodpsxnfgijfx Ac Tet Rear tires condition: 80 - 100% Battery voltage: 48V Battery capacity: 620Ah Battery manufacturer: 80% remaining capacity Battery type: PzS Battery year: 2020 Battery condition: 80 - 100% Description: Condition: Overhauled, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced, and checked – without any warranty. Subject to prior sale. Documentation: Operator’s manual and inspection logbook. Rental – including long-term rental – available at attractive rates. Contact us for more information. Sale only to commercial customers (without warranty). Subject to prior sale or rental. Our general terms and conditions apply. The quoted price is subject to VAT. Sideshifter, Mast lateral displacement

Condition: used, Year of construction: 2017, - Working width: 530 mm - - Thickness table dimensions: 530 × 920 mm - - Total table length (infeed + outfeed): 2 300 mm - Entrance table: 1 240 mm - - Output table: 1 060 mm - Maximum thickness: 3 mm – 250 mm - - Maximum removal by planing: 8 mm - - Maximum thickness removed: 8 mm - - Cutting block diameter: 120 mm - Hedpfx Acezrt I Ao Tjt - Number of knives: 4 - - Feed rate: 6 or 12 m/min - - Powered planing table with mechanical display - - Motor power: 7.5 HP - - Net weight: about 980 kg

Condition: used, Year of construction: 2017, Overview This sleeve labelling and shrinking system was manufactured in 2017 by Germany Krones. The system consists of a Krones Sleevematic sleeve applicator and a Krones Shrinkmat shrink tunnel, designed for the application and shrinking of sleeve labels on bottles and containers of various formats. Technical data Hjdoztan Eopfx Ac Tst - Formats: Various bottle and container formats - Application: Sleeve labelling and sleeve shrinking - Configuration: Krones Sleevematic sleeve applicator + Krones Shrinkmat shrink tunnel - Labelling technology: Sleeve labels Scope of Delivery - Sleeve applicator | Krones | Sleevematic | 2017 | Sleeve label application machine - Shrink tunnel | Krones | Shrinkmat | 2017 | Sleeve shrinking system

Condition: used, Year of construction: 2017, Manfred Kaiser sorting grab Year of manufacture: 2017 Mounting: MS 10 Cutting width: 1000 mm Weight: 1461 kg Errors and prior sale excepted. Internal vehicle number: 9125 WhatsApp support available! Hodpjwwf Hdjfx Ac Tjt If you have questions about the machine or would like further information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: used, first registration: 01/2022, color: other, total length: 5,800 mm, Year of construction: 2022, Unused Hiab Optima 25-ton hooklift with 580 cm system length Year of construction 2002 Including service = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Hodpfxezucuke Ac Tjt Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: excellent (used), mileage: 65,839 km, power: 360 kW (489.46 HP), first registration: 06/2017, fuel type: diesel, axle configuration: 8x2, fuel: diesel, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, EBS, crane, electric window regulation, = Additional options and accessories = - Air suspension system - Cabin - Power take-off (PTO) - PTO - Speed limiter = More information = Axle configuration Front axle 1: Tyre profile left: 50%; Tyre profile right: 50% Front axle 2: Tyre profile left: 50%; Tyre profile right: 50% Rear axle 1: Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Lift axle; Steering; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 27.730 kg Hsdpfx Acezucqrj Tst Carrying capacity: 11.270 kg GVW: 39.000 kg Functional Make of bodywork: Palfinger PK92002-SH-H CE mark: yes Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Identification Registration number: 49-BJP-7 = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: excellent (used), mileage: 75,008 km, power: 265 kW (360.30 HP), first registration: 09/2017, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, Year of construction: 2017, = Additional options and accessories = - PTO = More information = Front axle: Steering; Tyre profile left: 50%; Tyre profile right: 50% Rear axle: Tyre profile left: 50%; Tyre profile right: 50% Empty weight: 21.160 kg Carrying capacity: 840 kg GVW: 22.000 kg Technical condition: very good Visual appearance: very good Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Hsdpfx Acezucphe Tot Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: excellent (used), Rademaker block processor with Rondo make up line. Has been producing 'Salmon en croute' for major UK supermarkets. Whole line is in lovely condition and can obviously be easily adapted to run other products like pasties, sausage rolls etc. Mainly used seasonally so only 11,800 running hours. Hedpfxsiabu Uo Ac Tjt

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 6,300 h, load capacity: 1,400 kg, lifting height: 8,600 mm, free lift: 2,840 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 3,400 mm, battery capacity: 775 Ah, remaining battery capacity: 78 %, battery voltage: 48 V, fork length: 1,150 mm, tire condition: 100 %, front tire type: polyurethane tires (non-marking), rear tire type: polyurethane tires (non-marking), total height: 3,400 mm, drive type: Elektro, Equipment: UVV, Reach truck Load center: 600 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Hodpsycy Ryjfx Ac Tjt Condition: Refurbished, no warranty Technical condition: very good Front tire type: Polyurethane Front tire condition: New Rear tire type: Polyurethane Rear tire condition: New Battery voltage: 48V Battery capacity: 775Ah Battery type: PzS Battery year of manufacture: 2016 Description: Overhauled, serviced, and inspected according to FEM 4.004 (UVV). NEW BATTERY // Completely repaired, serviced and checked - NEW BATTERY Side shifter, Mast lateral traverse 3rd valve, 4th valve, joystick

Condition: good (used), Year of construction: 2017, operating hours: 1,480 h, load capacity: 2,200 kg, fuel type: electric, empty load weight: 550 kg, mileage: 1,480 km, This electric pallet truck, manufactured by Hyster, is from 2017. It has a lifting capacity of 2,200 kg and is equipped with an external battery charger. It has only 1,480 operating hours. It is suitable for use with Euro pallets. Watch the video on YouTube. Hjdpsxg R Ebjfx Ac Tet

Condition: used, Year of construction: 2017, Doosan 1.6t Year 2017 Hsdpfxoztxxve Ac Tet Hour meter 12000 Triple side shift

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, operating hours: 443 h, Format 4 panel saw, model Kappa 550 e-motion - 10 kW, 3 speeds 3000/4000/5000 rpm - Year of manufacture: 2017 - Vorritzer operating indicator - Rip fence 3200 mm, swiveling 90°–45°, 2 fence jaws - Extension table 1250 x 650 mm - Sliding table „X-Roll“, cutting length 3200 mm, scoring shoe - Position-controlled parallel fence with digital display in the control panel at eye level, cutting width 1250 mm - Upper guard, hood for 90° cuts, and hood for miter cuts, height-adjustable and can be swiveled away from the work area - e-motion control system, 15" color screen, touch function, control panel at eye level. USB interface and preparation for network connection, adjustable and can be swiveled away from the work area - Saw blade diameter 250–550 mm, cutting height max. 202 mm - Position-controlled height adjustment & angle adjustment 0°–46° - Circular saw with table extension up to 1200 mm behind the saw blade axis, steel powder-coated - Weight: 1300 kg Hjdpfow Tfahex Ac Tot - Vorritzer operating indicator - Total operating hours: 443.47 h Price ex works Transport possible for an additional charge!

Condition: used, New: Yes Attachment suited for: Agricultural machines Hedpfezta S Rjx Ac Tet

Year of construction: 2024, condition: used, New: Yes Hjdpfjzta Nijx Ac Tjt Attachment suited for: Agricultural machines

Year of construction: 2017, condition: used, Suitable for automatic cutting and surface grinding of carbide and HSS rods with high precision for standard and special solutions. Accessories: Total enclosure, Automatic feed (hydro-pneumatic), Rapid traverse adjustable via touch panel, Automatic fire extinguishing system Kraft & Bauer FB 703, Freely programmable length positioning, Siemens Simatic HMI control system, Prepared for connection to a central coolant system. Weight approx: 1700 kg Dimensions W x D x H: 1900 x 1200 x 2400 mm Cutting disc diameter: Max. 200 mm Drive power grinding motor: 4,0 kW Workpiece length without loader magazines: 3 - 450 mm Workpiece diameter without loading magazine: 3 - 32 mm Workpiece length with loader magazine: 1-350 mm Hedpfx Acsv Uw U Nj Tet Workpiece diameter with loading magazine: from 3 - 20 mm