Used 270M-500-210 for sale (17,653)

Condition: good (used), Welding rotary table KT 500, with 100mm through hole Load horizontal 500 KG, tilted 250 KG Power consumption AC 380V, 50 Hz Rotary motor AC 400W table diameter 700mm height 700mm, width 800mm, length 800mm Weight 155 KG Tilt range stepless electric 0 - 90 Itodpfeb U Havox Aifjg speed 0,3 - 2,5 rpm Welding current transmission max. 500 A Incl. hand remote control foot remote control Surcharge: Quick clamping - jaw chuck Diameter 400mm, 530.-€ CE-sign/approval

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – Wood Chip Biomass Boiler (2009) ⚙️ Technical Data • Model: Fröling Turbomat 500 • Year of manufacture: 2009 • Rated output: 450 kW (W40) • Maximum output: 495 kW • Water capacity: 750 liters • Operating pressure: 6 bar • Max. temperature: 110 °C • Weight: approx. 6,800 kg • Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ Isdjxmrwfjpfx Aifjtg 🔩 Key Features • Fully automatic ash removal and heat exchanger cleaning • Four-layer, refractory high-temperature combustion chamber with chamotte lining • Water-cooled feed channel – suitable for fuels with higher moisture content • Stoker grate with continuous, efficient fuel combustion • Lambda control system with multi-zone air management and low emissions • Automatic draft and induction fan control • Heavy-duty industrial construction, maintenance-friendly design • Fuels: Wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • High efficiency, fully automatic operation • Low maintenance requirements, long service life • Reliable performance even with fuels with higher moisture content • Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years’ experience in the heating technology sector. We have a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a continuously available stock of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heaters • Industrial heating systems • Buffer tanks • Heat exchangers • Auger conveyors • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: We also carry a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from residential to industrial solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units available that are not yet listed online. 📅 Viewing: Viewings at our warehouse are available by prior appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: new, TECHNICAL DATA: - Base area: 15,000 x 24,000 mm [other variants available] - Grid spacing: 5,000 x 6,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm chipboard P6, raw/white - Load capacity: 500 kg - Colour: RAL color of your choice - Condition: new The platforms can be expanded in the specified grid as standard. Other sizes and heights are available on request. Our team is happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing cross-members - Flooring - Fastening material PRICES: Variant I: Base area: 30 m² | Dimensions: 5,000 x 6,000 mm | €4,499.65 net, plus transport costs and VAT. Variant II: Base area: 60 m² | Dimensions: 5,000 x 12,000 mm | €7,393.50 net, plus transport costs and VAT. Variant III: Base area: 90 m² | Dimensions: 5,000 x 18,000 mm | €7,303.60 net, plus transport costs and VAT. Variant IV: Base area: 120 m² | Dimensions: 5,000 x 24,000 mm | €10,513.84 net, plus transport costs and VAT. Variant V: Base area: 60 m² | Dimensions: 10,000 x 6,000 mm | €13,707.36 net, plus transport costs and VAT. Variant VI: Base area: 180 m² | Dimensions: 10,000 x 18,000 mm | €19,027.30 net, plus transport costs and VAT. Variant VII: Base area: 240 m² | Dimensions: 10,000 x 24,000 mm | €25,003.69 net, plus transport costs and VAT. Additional configurations available. Optional accessories: - Railing - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PERSONS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp Itsdpfx Aiexpiztofsg ⚙️ CUSTOM DESIGN & MANUFACTURING This platform system is an example from our standard range. Of course, we develop and manufacture your warehouse platform exactly according to your operational requirements – tailored to area, load-bearing capacity, platform height, and intended application. Our planning department will prepare a custom, non-binding offer for you based on your specifications. Whether new construction, extension, or modernization of existing systems – we support you with expert knowledge and practical solutions. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or shipment is available at an additional cost. The extra costs depend on the place of delivery and the size of the consignment, and can be specified individually on request. PAYMENT TERMS Payment terms will be agreed upon when placing the order. The price is to be understood as unit/net price or as stated in the description (plus VAT). You will of course receive an invoice showing VAT. ABOUT US The company DLK, located in Nordhorn, deals in new and used products for warehousing logistics, conveying technology, mezzanine floors, textile storage solutions, as well as in machinery for commerce, industry, and craft trades. We constantly offer attractive used machines from various manufacturers/brands at competitive terms. If you have any questions, please feel free to contact us at any time. ✅ Four wins – The success factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: good (used), TECHNICAL DATA - Main beam: IPE 600 mm (various sizes & load capacities available) - Secondary beam: Sigma 410 mm (220 & 260 mm also available) - Decking: P6 chipboard, double-sided coated, 38 mm - Load capacity: 500 - 1,000 kg / m² - Colour: RAL 9010 Pure White - Condition: used Large quantities available immediately from stock in Nordhorn. The IPE 600 allows for large spans! Scope of delivery: - Columns - Main and secondary beams - Bracing crosses - Flooring PRICES: from €40.00 net per m² Prices may vary depending on design (load capacity and column spacing). Please contact our team for a consultation. Optional accessories - Handrail - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PARTNERS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist with the transport and installation of the item. Pickup is available. Delivery or shipping can be arranged for an additional charge. Additional costs depend on the delivery location and shipment size and can be quoted individually. PAYMENT TERMS Payment terms are to be agreed upon when placing an order. The price is to be understood as a unit/net price or as stated in the description (plus VAT). Naturally, you will receive an invoice with VAT shown. ABOUT US DLK, based in Nordhorn, supplies new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive terms. Please feel free to contact us with any questions. Four wins – The DLK success pillars – Warehouse Technology | Levelmaker® | Logistics | Solutions Itedpfegpxf Hex Aifsg

Condition: excellent (used), For sale: Industrial deburring machine from the German manufacturer Rolei Eisenblätter GmbH, model PEF 500. The device is designed for precise deburring, chamfering, and edge preparation of steel, aluminum, and other metallic workpieces. Manufacturer: Rolei Eisenblätter GmbH, Germany Itedpfx Aiew R E Hpefeg Model: PEF 500 Robust steel construction V-shaped work table—ideal for guiding components Electric drive with safety switch Application: edge processing, chamfering, weld seam preparation, and the removal of burrs after cutting and machining The machine is fully functional and in good technical condition. Extremely stable construction, ideal for workshops, metalworking shops, toolrooms, and series production.

Condition: used, Steel floor plates Length: 2210 mm Width: 1500 mm Isdpfx Ajxxqypsifotg Thickness: 260 mm With T-slots in both directions Weight: approx 2 T 3 same plates available.

Condition: excellent (used), Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm min. material length 800 mm max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm Ijdpfx Asma Dkfsifetg engine power 45 kW two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm receiving table 6200 mm chain width 60mm seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm weight 3000 kg

Condition: used, Year of construction: 1979, machine/vehicle number: Res BS, Demag PK2 Chain Hoist Crane Lifting Unit 250kg / 500kg Approx. 40 units available!!! 250kg / 0.25t rated load / lifting capacity – single fall – 500.- 500kg / 0.5t rated load / lifting capacity – double fall – 600.- With 2 lifting speeds, lifting height approx. 3-4m Complete with pendant control and load hook Total weight approx. 40kg, 380V 50Hz connection Itodpfx Asvzkyleifog Top condition, fully functional. Not a worn or used device! Connect and start operating. Comes from ongoing operations Item location: 75053 Gondelsheim See pictures

Condition: new, maximum load weight: 2,000 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,100 mm, loading space width: 2,100 mm, loading space height: 2,200 mm, Equipment: tail-lift, Through-loading curtainsider trailer with tail lift Technical data: ? Total weight: 3500kg ? Interior dimensions: L:410cm x W:210cm x H:220cm ? Payload: approx. 2000kg ? Loading height approx. 95cm Ijdpfx Ajfq I I Nsifjtg ? Chassis welded and hot-dip galvanized ? Lightweight tarpaulin body ? Sliding tarpaulin on both sides ? 14 inch tires ? Braked axle ? Multiplex ? Plate floor 15mm ? Support wheel ? Front portal doors with stainless steel espagnolette lock ? 12 volt lighting system, 13-pin plug ? Aluminum ramp plate, hinged inside in front of the portal door, locked with slider, height approx. 50 cm, Can be folded up on the drawbar ? Tail lift with 750 kg load capacity We manufacture bodies of any size and type on any chassis. Tarpaulin, GRP sandwich, aluminum. visit us at: Bodies - Complete vehicles - Trailers - Advice - Financing Subject to errors and prior sale, no liability for printing and input errors.

Condition: new, maximum load weight: 2,200 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,200 mm, loading space width: 2,100 mm, loading space height: 2,350 mm, Equipment: tail-lift, Through-loading box trailer with tail lift These are not original photos, the trailer only has a combination lashing strip. Deviations reserved. Technical data: Itsdjtp Apxjpfx Aifsg ? Total weight: 3500kg ? Interior dimensions: L:420cm x W:210cm x H:235cm ? Payload: 2200kg ? Loading height approx. 90cm ? Chassis welded and hot-dip galvanized ? Lightweight sandwich box body ? Roof and walls approx. 25mm ? 14 inch tires ? Braked axle ? Multiplex ? Plate floor 15mm ? Support wheel ? 1 row of combination lashing strips ? 5 pairs of floor lashing rings ? Front portal doors with stainless steel espagnolette lock ? Aluminum skirting board 160 mm high ? Interior lighting as light strip with switch ? 12 volt lighting system, 13-pin plug ? Aluminum ramp plate, hinged inside in front of the portal door, locked with slider, height approx. 50 cm, Can be folded onto the drawbar ? Dhollandia tail lift with hydraulic support We manufacture bodies of any size and type on any chassis. Tarpaulin, GRP sandwich, aluminum. visit us at: Bodies - Complete vehicles - Trailers - Advice - Financing Subject to errors and prior sale, no liability for printing and input errors.

Condition: new, SCM Olimpic 500 HT - Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 - "HP T-ER2" version - "eye-S" control panel - "Maestro active edge" human-machine interface (HMI) software - Fine milling and radius scraping unit, radius = 1 mm - Fine milling and radius scraping unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer on the infeed guide - "SAVENERGY" kit - Interior lighting of the booth and gluing area - Nesting rollers - Release agent spray unit "AAR" 1 - Sprayer for finishing the edge - Sprayer for delicate edges - "RT-V1" jointing unit - "EASY SIZE" device - "VC-VM" gluing unit - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - "K-2 Radius" trimming unit - Chamfering and Radius milling unit "R-HP Multiedge 2R" - Rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE kit with 3 automatic positions straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Flat scraper "RC-N" - Buffing unit "SP-V" Machine is new and still in original packaging. Promotional machine at a special price. Iodpfxewkf Ihs Aifotg

Condition: excellent (used), CERTUSS Universal 500 TC. 500 kg/h. 10 bar. Rapid steam generator Itodpsxqr D Tjfx Aifeg

Condition: excellent (used), Dimensions: 21000x500mm speed: Variable Quantity: 2 pieces Price/unit Itjdpfx Aisf D Hb Ujfsg

Year of construction: 1997, operating hours: 54,646 h, condition: used, Traub TNA500 Serial No. 253 Spindle speed: 2800 rpm 12-position tool turret Itjdpfxjyt Slws Aifsg Equipped with driven tools Power: 46 kVA

Condition: repair required (used), Year of construction: 1997, functionality: fully functional, power: 18 kW (24.47 HP), type of cooling: air, manufacturer: BECKER Iedpfsvmhqrox Aifjtg Type: rotary vane vacuum pump Model: DTLF 500 Year of construction: 1997 Order number: 1475879 NOTE: rotor blades need to be replaced. electric motor ELEKTRO ADDA Speed: 980 min-1 Rated power: 18.5 kW Input power: 500 m3/h Rated pressure: 800 mbar Rated vacuum: 0 mbar Attachment: FC200LT/6 Manufacturer: ELECTRO ADDA Type: MotoR Motor voltage [V]: 380/690v Current [A]: 38.5 Motor voltage [V]: 380-690 Rated speed [rpm]: 970/1170 Weight: ca350kg

Condition: like new (used), Year of construction: 2022, Equipment: documentation/manual, Welding Robot - Set with welder and 3-axis positioner: 1. Welding robot by KUKA model CYBERTECH - KR 8 R-2100-2 KRC4 prod. 2022 - Manipulator type KR8 R2100-2 - Maximum reach - 2100 mm - Payload max. - 20 kg - Positioning repeatability +/- 0.05 mm - Control KRC4 - System Software - KUKA System KSS 8.6 - System Sofware - PROFINET, Safe.Operation, - Welding Proces Software - KUKA.ARC.Tech 2. Positioner 3-axis KUKA KP3-V2H max. 1000kg / side L - 2000 mm - distance between plates D - 1600 mm - max. diametr of fixture 3. FRONIUS welding machine type TPS 500i ( option: TPS 500i CMT ) Welding Packaging - PMC (Pulse Multi Control) Welding Packaging - Standard Welding Packaging - Puls Itsdpfxsllyfis Aifsg

Year of construction: 2025, condition: new, Equipment: CE marking, Our company has been building foam cutting machines for over 15 years. The experience gained over the years of working on foam processing machines has allowed us to build the 4th generation of vertical machines RV 2500/2100 as well as the 3rd generation of horizontal contour lines SK3500. Our machines work on the Polish and European markets. The machines are designed and built in our company, the software is also our own. The materials used to build the machine are widely available on Polish and European markets. Our service works 7 days a week, providing a sense of security to our customers. Vertical machine Itodpfsiqt N Iox Aifjg left table 2100mm x 2600mm right table 2100mm x2600mm cutting height 1340mm Horizontal liner SK3500 rotary table 2200mm x2200mm cutting height 1250mm

Condition: excellent (used), Year of construction: 2024, CNC MECOF 2 PCS . YEARS OF MANUFACTURE 2005 AND 2007.They are in very good working condition. Iedpot E Nynsfx Aifstg

Condition: used, We are offering used lockers for sale. TECHNICAL DATA Width: 1,200 mm Height: 1,800 mm Depth: 500 mm Colour: Light grey Condition: Used PRICE €70.00 net €83.30 gross incl. VAT TIERED PRICING (unit prices) 1 - 5 units: €70.00 net 6 - 10 units: €66.50 net 11 - 25 units: €63.00 net from 26 units: €59.50 net Available quantity: 105 units YOUR CONTACTS AT DLK: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. Collection is possible for this item. Delivery or shipping can be arranged at additional cost. The extra charges depend on the delivery location and volume of the shipment and can be provided upon request. PROJECT PLANNING Our sales team is happy to provide you with a non-binding, customised quote tailored to your requirements. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is per unit/net price as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machinery for trade, industry and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. Four wins – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions Itjdpfx Aisy Eqc Djfsg

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: B725, cutting height (max.): 150 mm, cutting width (max.): 300 mm, table length: 3,000 mm, saw blade length: 3,570 mm, Equipment: CE marking, TECHNICAL DETAILS Max. saw blade length: 3,570 mm Max. cutting width: 300 mm Max. cutting height: 150 mm Max. saw blade diameter: 500 mm Saw blade arbor diameter: 35 mm Infeed table length: 3,000 mm Outfeed table length: 3,000 mm Iodpfjy Nxynjx Aifetg MACHINE DETAILS Voltage: 400 V Fuse: 16 A Power: 5.5 kW Main motor power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,100 x 1,650 mm Transport weight: 700 kg Transport packages: 3 EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 0-250-23-0021, functionality: fully functional, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, feed rate X-axis: 138 m/min, feed rate Y-axis: 80 m/min, Submission of a bid obligates timely collection by 15.06.2026! TECHNICAL DETAILS X-axis speed: 138 m/min Y-axis speed: 80 m/min Z-axis speed: 50 m/min Itsdpfx Aey Sad Hsifsg Workpiece length: 300–2,500 mm Workpiece width: 100–1,000 mm Workpiece height: 4–80 mm MACHINE DETAILS Control system: power control PC 85 T Dimensions (L x W x H): 6,500 × 2,300 × 2,700 mm Electrics: 3 × 415 V / 50 Hz Power consumption: 19.5 kW Fuse: 50 A Pneumatics: min. 7 bar Air consumption: 2,500 NL/min Extraction connection: 2 × 280 mm Extraction capacity: min. 4,450 m³/h

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 0000832430, total height: 976 mm, total width: 686 mm, total length: 1,152 mm, overall weight: 126 kg, No reserve price – guaranteed sale to the highest bidder! MACHINE DETAILS Adjustable welding current range: 5 A – 500 A Duty cycle at 40°C: 500 A / 80%, 470 A / 100% Open-circuit voltage: 82 V Mains voltage (factory setting): 3 x 380 V – 400 V Ijdpjy Sk Nyefx Aifjtg Mains voltage (possible): 3 x 440 V – 460 V, 3 x 480 V – 500 V Mains tolerance (factory setting): -25% to +20% Frequency: 50 Hz / 60 Hz Recommended generator output: 33.2 kVA Efficiency: 90% Power consumption Pi: 26 W Cooling capacity at 1 l/min: 1,500 W Pump pressure: 3.5 bar Tank capacity: 8 l Protection class: IP23 EMC class: A Dimensions & Weight Dimensions (L x W x H): 1,152 mm x 686 mm x 976 mm Weight: 125.5 kg EQUIPMENT PM 551 W LED X M9 3 m welding torch Pivoting arm for wire feed unit B300 wire spool adapter MIG/MAG functional torch with OLED graphic display, water-cooled Mains plug (installed) Crane frame Pressure regulator with manometer, 30 l Intermediate hose package, water-cooled, 14-pin, 95 mm, 1.8 m Intermediate hose package, water-cooled, 14-pin, 95 mm x 10 m Ground cable with clamp, 550 A / 60%, 95 mm 4 m AK300 wire spool adapter for basket spool (B300) 'blueCool' coolant for up to -10°C, 5 l

Condition: used, input voltage: 230 V, Teca-Print TPX 500 industrial pad printing machine. Professional industrial pad printer used for printing onto plastics, components, promotional items and industrial products. Machine details: Model: TPX 500 Manufacturer: Teca-Print AG 230V supply Pneumatic operation Adjustable print table Ijdpfxsy Sgxqo Aifotg Industrial production machine Suitable for: promotional product printing industrial component marking plastics printing product branding manufacturing environments Previously used in commercial production environment. Condition: Sold as seen / untested. Inspection welcome. Buyer responsible for removal and transport.

Condition: excellent (used), Year of construction: 2011, Ref: 11100 . 2011 Duplo DPB-500 EVA Perfect Binder Excellent condition! Only 40,000 books on the counter! Single clamp solo binder designed for the digital book-on-demand market with operation by one person. Itjdpfx Aiey Nzclofog Features: • EVA spine glue unit • Programmable pre-melter • Computerised set-up with icon based touch-screen • Automatic setting of clamp book thickness and cover scoring • Double/Out of cover detector • Light beam score positioning • Milling & roughing unit with dust bag extraction • Internal vertical stacking tray delivery Specification: Book thickness: Min 1mm / Max 51mm + cover thickness Book size (spine × fore-edge): Max 360mm × 320mm Min 120 × 120mm Cover size: Max 360 × 696mm / Min 120 × 250mm Cover weight: 80-302gsm Cover Pile height: 70mm Mechanical speed: Max: 525 /hour

Condition: used, Year of construction: 2019, operating hours: 3,420 h, functionality: fully functional, machine/vehicle number: W09FAL226KMF14072, operating pressure: 500 bar, total length: 2,700 mm, total height: 2,100 mm, total width: 2,100 mm, pressure: 500 bar, empty load weight: 2,600 kg, input voltage: 12 V, fuel: diesel, heating capacity: 198 kW (269.20 HP), overall weight: 2,600 kg, water tank capacity: 400 l, fuel tank capacity: 220 l, temperature: 100 °C, volume flow: 1.8 m³/h, noise level: 100 dB, pressure (max.): 500 bar, Falch Trail jet 30 500-30-95-d high-pressure cleaner, year of construction 2019. The machine runs at a pressure of 100 - 500 bar and a temperature of 10⁰c - 100⁰c. Its has a remote control feature to remotely control temp, pressure and on and off. Also it comes with the front storage box. The machine has been fully serviced and maintained by falch. It has been well looked after with one owner from new. Manufacturer: Falch Model: Trail jet 30 500-30-95-d Construction year: 2019 Serial number: G57200378 EU type number: e1*2007/46*0386*01 Identification number: W09FAL226KMF14072 Weight: 2600 kg Vertical load: 120 kg Axle 1 load: 1300 kg Axle 2 load: 1300 kg If you have any questions or need more information, feel free to send us a message or give us a call. Ijdpfsy Sazfox Aifotg