Used Bv 3500 for sale (4,277)

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Isdpfxex Uyzqo Am Ietf The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2007, turning diameter 1400 mm swing diameter 1600 mm turning height 500 mm Workpiece length - Bore grinding 300 mm Workpiece length - Turning 500 mm control Siemens Sinumerik 840 D work piece spindle speed range 0-400 U/min boring diameter 100 - 500 mm total power requirement ca. 185 kW weight of the machine ca. 35 t With grinding spindle Table strokes: - Z1/Z2 axis 1000 mm - X1/X2 axis approx. 1400 mm Table speed infinitely variable: - Z 0 to 30 m/min - X 0 to 60 m/min - Workpiece spindle flange diameter 520 mm - Infeed speed 0.01 - 15 mm/min Equipment/ Accessories - Grinding spindle - Kaiser dresser - Tool measuring probe - Filter system Iodpfx Amsw Rf Slj Ijtf - With flushing nozzle connections - 2 Capto holders - 1 set of jaws for chuck - documentation

Condition: used, mileage: 12,195 km, power: 135 kW (183.55 HP), fuel type: electric, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,300 mm, first registration: 10/2023, color: white, number of seats: 3, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, parking sensors, seat heater, sliding door, traction control, = Additional Options and Equipment = - Air conditioning - Rear parking sensors - Front parking sensors - Right-hand sliding side door - Android Auto - Apple CarPlay - Automatic dipped beam - Heated exterior mirrors Iedpfx Amsx R Tiyo Istf - Front power windows - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Height-adjustable driver's seat - Height-adjustable steering wheel - Keyless start - Collision mitigation braking system - Collision warning system - Leather steering wheel - Multimedia capability - Fog lights - Rain sensor - Reversing camera - Headlamp assistant - Heated seats - Voice control - Lane keeping assist - Immobilizer - Tachograph - Connected services - WiFi hotspot - Windscreen heating - Partition wall = Further Information = General Information Number of doors: 5 Model range: Feb. 2022 - 2026 Cab type: single Technical Information Torque: 430 Nm Transmission Gearbox: 1 speed, automatic Dimensions Length/Height: L2H2 Dimensions (L x W x H): 553 x 206 x 255 cm Weights Curb weight: 2,494 kg Payload: 1,006 kg Gross vehicle weight (GVW): 3,500 kg Battery Existing battery: Purchased Battery status: 99% Charging port: Type 2 Suitable for fast charging: yes Fast charging connection: Combined Charging System (CCS) Interior Interior: black Service, History and Condition APK (MOT): valid until 10/2027 Number of keys: 3 (2 remote controls) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: good (used), Year of construction: 2000, Dimensions (L/W/H) 2300 x 700 x 1300 mm Itedpfxjxr Rbmo Am Ijf Air consumption 3500 m³/h Motor output 1,5 kW weight of the machine ca. 150 kg

Condition: excellent (used), mileage: 49,751 km, power: 105 kW (142.76 HP), first registration: 07/2020, fuel type: diesel, tire size: 195/75R16, axle configuration: 4x2, wheelbase: 3,670 mm, fuel: diesel, color: red, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, total length: 6,300 mm, total width: 2,080 mm, total height: 2,460 mm, loading space length: 3,030 mm, loading space width: 2,020 mm, loading space height: 400 mm, Year of construction: 2020, Equipment: ABS, AdBlue, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, power assisted steering, power mirror, soot filter, traction control, trailer coupling, General information Cab: single Registration number: 078299 Technical information Engine capacity: 2.143 cc Axle configuration Tyre size: 195/75R16 Brakes: disc brakes Front axle: Max. axle load: 1850 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70% Rear axle: Max. axle load: 2300 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Weights Empty weight: 3.227 kg Carrying capacity: 273 kg GVW: 3.500 kg Max. towing weight: 3.500 kg (unbraked 750 kg) Functional Make of bodywork: SCATTOLINI CABRETA Height of cargo floor: 110 cm Tipper: Back Maintenance APK (MOT): New APK (MOT) upon delivery Condition Technical condition: very good Visual appearance: very good Damages: none Iodpfx Amowc Dymo Ijtf Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Climate control - Leaf spring suspension - Leather interior - Multifunctional Steering Wheel - Particulate filter - Radio/Cd/Audio system - Stability control - Toolbox - Twin wheel axle = Remarks = VIDEO: Very nice and neat 3x pieces on stock Mercedes Sprinter 514 CDI 2.2 143 hp Euro 6 Rear tipper Scattolini Cabreta Internal dimensions: L. 303 / W. 202 / H. 40 cm 61000 KM Fully dealer maintained GVW 3500 KG (Driving license B) Towing weight 3500 KG Technically and optically in very good condition

Condition: good (used), Manufacturer: Millutensil Type: BV 25 PM Year of construction: 1987 Closing force up to 18000 Kg Opening force up to 15000 Kg Driven table in & out feed Upper table 270 Gr Upper size 900 x 550 Specifications Itodpjrr Ui Refx Am Ijf Metric US Standard Distance between uprights 930 mm Installation height 760 mm Table length 755 x 755 mm ram stroke 600 mm Starting speed 1000 mm/min. Working speed 1000 mm/min. Return speed 1000 mm/min. Table rotation 360 rpm Dimensions (estimate) length 1350 mm width 1350 mm Height 2000 mm weight 1500 kg

Year of construction: 2018, condition: good (used), Make: FACCIN Type: 4HEL 3590 Control: Siemens TOUCH Year: 2018 Specifications Metric US Standard Rolling width 3500 mm Rolling thickness 3x toproll Ø 80 mm Rolling thickness 5x toproll Ø 110 mm Rolling thickness prebending 90 mm Top Roll Ø Iedpskvm Nfsfx Am Iotf 900 mm Top Roll Ø 900 mm Bottom Roll Ø 800 mm Side roll Ø 600 mm Number of rolls 4 Rolling speed 0-6 Adjustiment lower roll 0-200 mm/min. Adjustment side rolls 0-400 mm/min. Top support yes Side supports yes Number of driven rolls 2 Power 90+75+9 kW Dimensions (Estimate) Length 4430 mm Width 8800 mm Height 11000 mm Weight 178000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Filter hose chip extraction, dust bag, filter, filter bag for chip extraction, dust extraction, extraction system, ventilation ducts and fittings, exhaust hose, extraction hose -Ventilation hose: Exhaust hose with flange -Flange: Ø outside 290 mm, slightly curved -Length: 3500 mm -Number: 20 hoses available -Price: per piece Isdpjpyk Nfsfx Am Iotf -Weight: 1.6 kg/piece

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,000 mm, table width: 1,000 mm, table length: 3,500 mm, ZAYER bed type milling machine in good working condition. Specifications: Itedpsw Uha Hsfx Am Ijf X-axis travel: 3200mm Y-axis travel: 1200mm Z-axis travel: 1000mm milling head taper: ISO 50 control: Heidenhain TNC410 table size: 3500x1000mm year of manufacture: 1999

Condition: used, Year of construction: 2000, machine/vehicle number: LC593, Used complete pharmaceutical filling glass line - 3500 BPHTechnical Specifications & Performance DataThis used bottling line is a complete, second hand pharmaceutical packaging solution designed for the filling and packaging of glass bottles for infusion-type applications. The line is currently in production and supports multiple dosage formats with integrated washing, filling, capping, crimping, sterilization, inspection, labeling, cartoning, and palletizing. Engineered for sterile handling, it uses purified water (PW), water for injection (WFI), and sterile compressed air in critical stages.Production speed: 3500 bottles per hourBottle volumes supported: 0.2L, 0.25L, 0.4L, 0.5LContainer type: Glass bottles (infusion/IV-style)Line configuration: Depalletizer, Bottle Washer (PW/WFI + sterile air drying), Filler, Vacuum stage, Bottle Capper, Aluminum Crimping Machine, Tray Loader, Autoclave, De-trayer, 2 x Manual Inspection Stations, Labeling Machine, Cartoning Machine, Carton Sealer, PalletizerSterilization: Autoclave by SBMOperation status: In productionAdvanced Automation & Control SystemsThe line features integrated handling and synchronized conveyors to maintain steady flow through washing, filling, closing, and terminal packaging stages. Manual visual inspection stations are positioned downstream of sterilization to ensure product quality. Format changeover is designed to handle multiple bottle sizes from 0.2L to 0.5L, enabling efficient batch transitions. Standard pharmaceutical best practices such as sterile air drying and clean utility segregation support controlled operations. Electrical parameters and PLC/HMI specifications are line-dependent and can be aligned with site utilities.Production Line Integration CapabilitiesAs a complete packaging line, this system operates in-line from depalletizing to palletizing. The upstream sections prepare and clean glass containers, the midstream modules manage accurate filling and secure closure with crimping, and the downstream area performs sterilization, inspection, labeling, case packing, sealing, and palletizing. The line offers multi-format flexibility for 0.2L, 0.25L, 0.4L, and 0.5L glass bottles and can be integrated with site-level quality systems and traceability procedures. Conveyors and accumulation zones are configured to balance cycle times across process steps.Machine Condition & Maintenance HistoryThe line is currently in production, indicating ongoing operability and maintained status. Washing with PW/WFI and sterile air drying underscores disciplined hygienic routines aligned with pharmaceutical processing. Regular operation across all stations—from depalletizer through palletizer—demonstrates a cohesive, production-ready asset suitable for immediate deployment after site adaptation.Operational Performance & VersatilityDesigned for glass bottles and sterile liquid products, the line combines precise filling with a dedicated vacuum stage and reliable closure via capping and aluminum crimping. The presence of an autoclave enables post-closure sterilization, while dual manual inspection stations provide visual particle control. The labeling, cartoning, ... Iedpfsydpa Tox Am Istf

Condition: used, Year of construction: 2002, machine/vehicle number: LA14, Used bottel washer dryer GAI - 3500 BPHTechnical Specifications & Performance DataThe Bottle Washer Dryer 5008 is a rotary carousel drying unit engineered for reliable bottle handling within a used bottling line or standalone drying station. Manufactured by Cimec, this second hand machine delivers consistent performance for beverage production and industrial packaging applications where efficient moisture removal is required before downstream labeling, capsule application, or case packing.Model: 5008Year of manufacture: 2002Production speed: up to 3,500 bottles per hourBottle formats (volumetric): Compatible with 0.5L and 0.75L bottle formatsBottle geometry: Cylindrical containersBottle diameter range: 60 mm to 115 mmDrying technology: Rotary carousel (hot air) with anti-condensation featuresPLC installed: NoDocumentation: Paper manuals and electrical schematics availableAdvanced Automation & Control SystemsThe 5008 emphasizes robust mechanical design with straightforward operator control, ideal for facilities prioritizing simplicity and ease of maintenance. While no PLC is installed, the machine’s hot-air drying system integrates anti-condensation management to improve drying effectiveness and reduce residual moisture on the bottle surface. Safety guarding and interlocks are typically part of this class of equipment, supporting safe operation within production environments. Quick mechanical adjustments facilitate format changes across the stated diameter range, helping minimize downtime between production runs.Production Line Integration CapabilitiesThis rotary bottle dryer can operate as a dedicated station or be integrated inline with rinsing, filling, capsuling, and labeling equipment. It is well suited for beverage production lines processing both PET and glass bottles in cylindrical formats. Its compact, carousel-based layout supports smooth infeed and discharge with standard conveyor systems. Format changes within 60–115 mm diameter allow flexibility across common bottle sizes, making it a practical fit for lines handling 0.5L and 0.75L formats.Machine Condition & Maintenance HistoryThe machine has undergone a partial refurbishment in 2025 and has been stopped for approximately one month. It is currently packed and covered, available for inspection. The presence of paper manuals and electrical documentation supports easier recommissioning and setup. Overall, the unit presents as a well-kept second hand component suitable for integration into a used bottling line or as a targeted retrofit in an existing beverage production facility.Operational Performance & VersatilityThe hot-air drying concept with anti-condensation control improves surface dryness prior to downstream operations such as label application or capsule fitting, thereby enhancing label adhesion and presentation. The rotary carousel design ensures consistent residence time and uniform air exposure around the container. Suitable for a broad range of cylindrical bottles, the 5008 supports both PET and glass handling and can complement production of win... Ijdpfx Amjyhbdlj Iotf

Condition: used, Year of construction: 1998, Transnorm conveyor belt GF 3500-700-600 RA2200 Technical data: Conveyor length (NL): 3500 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,58 Drive: SEW gear motor, R27 DRS71M4BE1/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Itodpfx Aoq Tgw Ajm Iof Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: not inspected (used), functionality: unexamined, turning diameter: 280 mm, center height: 145 mm, center width: 750 mm, spindle speed (max.): 3,500 rpm, overall weight: 800 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Swing diameter over bed: 280 mm Swing diameter over cross slide: 178 mm Centre height: 145 mm Centre distance: 750 mm Spindle speed: 70 – 3,500 rpm Spindle bore: 35 mm Spindle nose: D 1-3 Tailstock taper: 3 MT Leadscrew diameter: 25 mm Thread: 6 mm pitch MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 11 A Dimensions & Weight Dimensions (L x W x H): 1,700 x 800 x 1,800 mm Weight: 800 kg Isdeym N D Rspfx Am Ijtf External reference: Neuburger

Condition: used, Year of construction: 2021, functionality: fully functional, Fully functional inserting machine PITNEY BOWES RELAY 3500 Itedpfx Amoyzyyts Iof

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 750x1400x2000 mm Weight 137 kg Total power requirement 3 kw Itedevz Einjpfx Am Ief

Condition: excellent (used), functionality: fully functional, Stainless Steel Work Table AT 3500 with Beech Wood Worktop and Rear Gallery 2 x Stainless Steel Sliding Doors with Shelving Iodjrhd Udepfx Am Istf Drawer Block on the Left Door with Shelf Dimensions: 3500 x 800/700 x 900 mm (WxDxH) Used device, cleaned Top sanded & freshly oiled Delivery service available Many more work tables in stock!

Condition: used, Year of construction: 2011, Wood chip boiler Urbas UR-FFR-3500 with 3500kW output, up to max. 120°C possible (rated for max. 110°C). Year of manufacture 2011, including hydraulic feed, bunker system with moving floor, hydraulic power unit, ash removal, dust extraction – multicyclone and Scheuch electrostatic filter, pumps and valves, heating pipes, control unit, chimney system, and complete plant documentation. Disassembly must be carried out by the buyer. Disassembly scheduled for August 2026. Iedpfx Ajvgcqysm Ijtf

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine Iodpex D Tbmofx Am Istf ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2026, condition: new, functionality: fully functional, total length: 680 mm, total width: 600 mm, total height: 820 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 03/2027, type of input current: three-phase, warranty duration: 12 months, machine/vehicle number: 2026, Dishwasher Model: S-Line 3500 + 3-stage filter system Euronorm 500 3 liters of fresh water consumption Display control 6 washing programs 2 special (extra fresh water and endless loop) peristaltic rinse aid and detergent dosing pump extra deep interior for sheets / tubs 600 x 400 mm DGUV V3 checked Drain / drain pump electronically Connection: 400 V, 6.7 kW, 16A-CEE plug Dimensions: 600 x 680 x 820 mm, WxDxH with warranty Included accessories: 1 plate basket Isdjfffhyepfx Am Istf 1 universal basket 1 cutlery basket Inlet and outlet hoses

Condition: used, Year of construction: 2017, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 710 mm, torque: 201 Nm, controller manufacturer: Siemens, controller model: 840D SL, table width: 500 mm, table length: 400 mm, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 50 bar, spindle motor power: 46,000 W, number of spindles: 1, number of slots in tool magazine: 50, mount diameter: 100 mm, Equipment: chip conveyor, rotational speed infinitely variable, Year of construction: 2017 Control unit Siemens: 840 D SL Spindle: SC 100 12000 1/min, 46kW, 201 Nm Ijdpoyk D U Ssfx Am Iotf Tool clamping system: HSK 100 Tool magazine / places: Chain / 50 Rotary table: 3+2 (360.000° X 0,001°) Coolant unit: Interlit TMF 300; IKZ 50 bar, (work area flushing) Positioning range XYZ (mm): 710 / 750 / 710 Pallet size (mm): 400 X 500 Workpiece clamping: Hydraulic 200 bar Additonal options, Specifics: Receiver for wireless measuring probe (RENISHAW); Pneumatic unclamp check at workpiece loading station; location check at workpiece loading station; Screen blow-off device for operator door; Fast drill fracture sensing (SBBK); status lamp; Integrated process monitoring (IPM) + Monitoring function to minimise machine damage in case of collision; Interface for exhaust system; exhaust system; Scraping conveyor for wet machining; interface robot loading; MSK multi spindle head; Balluff tool ident Format HL 06;

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, spindle bore: 90 mm, turning diameter: 1,500 mm, turning diameter over bed slide: 2,000 mm, turning length: 3,500 mm, rotational speed (max.): 250 rpm, TECHNICAL DETAILS Swing diameter: 2,000 mm Turning length: 3,500 mm Swing diameter over cross slide: 1,500 mm Faceplate diameter: 1,500 mm Working area Center height: 1,050 mm Working area Distance between centers: 3,500 mm (4,350 mm with extension) Spindle bore: 90 mm Speed range: 0.6 – 250 rpm Bed extension: 700 mm Roller steady rest: 150 – 1,400 mm MACHINE DETAILS Iedpoyrdqpsfx Am Istf Total power requirement: 28 kW Dimensions & Weight Space requirement: approx. 10 x 3 x 3 m Machine weight: approx. 22 t EQUIPMENT Tailstock Steady rest

Condition: used, Year of construction: 2018, Overview  This fill level and closure inspection machine was manufactured in 2010 by German company KHS. The operation view will be done with the label inspection machine from Indspect. It is designed for checking the fill height, closure and label of full bottles. The machine was running until January 2025 and is now stored in the company. Technical data Capacity: up to 25,000 bph Scope of Delivery  Fill level and closure inspection system | KHS Label inspection system | Indspect Iodpfewhw Sgex Am Istf

Condition: new, empty load weight: 1,178 kg, maximum load weight: 2,322 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 1,700 mm, loading space height: 1,900 mm, loading space volume: 12.9 m³, color: grey, construction height: 2,600 mm, working width: 2,240 mm, Hydraulics, automatic reversing, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * VEZEKO VT 3500 RAMP/ DOOR COMBI I DRIVE GRID CROSS WALL 400X170X190CM VIEHANHÄNGER RAMPENGUMMI 3XLÜFTUNG INNENLEUCHTE TECHNICAL DATA: - Make: Vezeko - Model: VT 3500 - Vehicle type: Livestock trailer - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 400 x 170 x 190 cm - External dimensions (L x W x H): 572 x 224 x 260 cm - Floor loading height: 51 cm - Perm. Total weight: 3,500 kg - Unladen weight: 1,178 kg - Payload: 2,322 kg - Chassis: Low loader (wheels next to the body) - Tires: 185R14C - Chassis: ALKO rubber spring axle - Support wheel: Yes, automatic - 100 km/h approval: Optional, can be retrofitted EQUIPMENT: - Brake: Yes - Number of axles:-2 - Floor: Aluminium chequer plate trough on wooden multiplex plate - Walls material: Double-walled anodized aluminium - Roof material: Tarpaulin - Number of animals:2 - Suitable for livestock types: Sheep, goats, small cattle, large cattle, calves, pigs - Overrun device/brake: ALKO - Galvanization: hot-dip galvanized - Drawbar: V-drawbar, bolted, C-profile - Fenders: aluminium chequer plate fenders - Standing area: 6.8 m - Double deck:No - Driving gate: Yes - Cross partition inside: Yes - Windows:Sliding side window, barred - Front exit: No - Rear door / hatch material: Aluminum, rubber-covered and tread strips - Interior light: Yes, rear - Rear lighting: Incandescent, lamps recessed in side struts - Side lighting: Rear track lights - Plug for lighting: 13-pin - Vehicle documents: COC papers DESCRIPTION: - Aluminum checker plate tub edged, welded on screen-printed wooden floor - Reinforced sturdy bolted V-drawbar - Very sturdy welded steel frame - Frame compl. hot-dip galvanized - many cross members for high point loading - anodized aluminium walls, double-walled 25 mm - tie-down option, with bar and 3 tie-down rings - access door on the right in the direction of travel with 2 robust angle lever locks - solid, hot-dip galvanized welded tarpaulin frame - ventilation opening at the front - 2 side struts for additional stability - one pair of ventilation openings on the left and right sides, barred from the inside - rear portal, rear portal, continuously welded, hot-dip galvanized in solid design - tailgate with flap - door combination - interior light at the rear with switch - tarpaulin completely closed at the rear over tailgate, with tensioning rubbers - non-slip rubber on the loading flap with integrated tread strips - 1400mm drive grid, rear, aluminium swivelling - 1400mm cross partition wall, aluminium, infinitely adjustable - maintenance-free rubber spring axle from ALKO - automatic reverse drive - ALKO overrun device and parking brake - 13-pin plug - return driving licence from ALKO. plug - reversing lights - large dimensioned safety lighting - integrated rear fog light - rear lane departure warning lights - automatic support wheel in the middle Accessories can be retrofitted - please enquire: - 100km/H approval with wheel shock absorber - reversing lights - dust box New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vl Itedpfx Amsu Ht A Ds Ief

Condition: excellent (used), Technical details Swing diameter over cross slide: 940 mm Turning diameter: 1,260 mm Itsdpsyr Sx Isfx Am Ief Speed (min.): 8 rpm Speed (max.): 900 rpm Overall height: 1,800 mm Overall length: 3,500 mm Overall width: 2,440 mm Three-jaw chuck diameter: 500 mm Centre distance: 3,500 mm Offer details VDF Wohlenberg V1180 Centre distance: 3,500 mm 3.5 - 710 rpm 71 - 900 rpm Chuck: 500 mm diameter

Condition: used, Technical details: Isdou Nwd Depfx Am Ietf power consumption: 350 A total power requirement: 17,5 kVA weight of the machine approx.: 64 kg dimensions of machine: 0,65 x 0,32 x 0,5 m Welding rectifier/inverter MIG/ MAG:40A / 14V up to 350A / 31,5 V TIG: 10A / 10V up to 350 A E-welding: 15A / 20,5V up to 350A / 34V Voltage U1: 380 - 415V Cooling type: F (water cooled) Protection class: IP 23 without hose package without grounding cable *