Used Workpiece Manipulator 10000 Kg Load Capacity for sale (82,902)

Condition: new, empty load weight: 1,010 kg, maximum load weight: 2,490 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 4,600 mm, loading space width: 1,980 mm, loading space height: 300 mm, loading space volume: 2.8 m³, color: silver, construction height: 1,680 mm, working width: 2,530 mm, incl. rear ramp / parabolic suspension / spare wheel / bucket storage, automatic reverse drive, drive-on ramp, hot-dip galvanizing, *INSTANTLY AVAILABLE incl. rear ramp / parabolic suspension / spare wheel / bucket storage Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY !!! - Gross vehicle weight: 3,500 kg - Unladen weight: 1010 kg - Payload: 2,490 kg - Interior dimensions: 460 x 198 x 30 cm (L x W x H) - Overall exterior dimensions: 660 x 253 x 168 cm (LxWxH) - Loading sill height: 38 cm - Tires: 195/60R12C - Brake: yes - Support wheel: yes, automatic - 100 km/h: optional - incl. vehicle documents Vehicle body: - Brake: yes - Number of axles: 3 - Floor: Wood, Finnish multiplex board - Side walls: Sheet steel, single-walled - Side wall height: 30 cm - Locks: Eccentric locks - Number of pallet spaces: 7 - Multifunctional vehicle: No - Tipping / lowering function: None - Hydraulic pump: - - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, bolted, C-profile - Mudguards: Aluminium chequer plate mudguards - Spare wheel: Yes - Bucket storage: Yes - Superstructures / attachments: No - Ramp shaft: No - Ramps/ramp flap: Yes - Ramp type: Continuous tailgate - Ramp load: - - Drive-on angle: approx. hot-dip galvanized - steel drive-on flap standing on shaft 130cm - sturdy eccentric locks - support brackets on drive-on flap - lifting aid for drive-on flap - very low chassis for low drive-on angle - excavator bucket rest at the front - spare wheel, mounted under excavator bucket support - 10x lashing rings mounted in the outer frame (1000dAN/kg) - 10x lashing rings on the inside - parabolic spring axle from KNOTT - parabolic spring axle for absolutely heavy-duty use - automatic reverse drive - KNOTT overrun device and parking brake - lockable coupling head - spare wheel, mounted under excavator bucket support - very sturdy bolted V-drawbar REINFORCED - 13-pin plug - return driving license - very sturdy bolted V-drawbar - 13-pin plug - return driving license - return driving license. plug - reversing lights - generously dimensioned safety lighting - integrated rear fog light - lighting recessed in rear frame - lane departure lights at rear with rubber arm - heavy-duty support wheel in the middle Accessories can be retrofitted - please enquire: - 100 km/h approval - storage box - net hooks - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Gjdsu Hrlqopfx Amueit

Condition: used, Year of construction: 2019, Carrying capacity: 2.045 kg GVW: 655 kg Front tyres / undercarriage remaining: 90 Gedpfxotr H D Rs Amujit Rear tyres remaining : 90 Tyre brand: - Front tyre size: - Rear tyre size: - Please contact PFEIFER GROUP for more information

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, overall weight: 35 kg, load capacity: 3 kg, arm reach: 677 mm, controller manufacturer: Motoman XRC, repeat accuracy: 0.03 mm, For sale in excellent condition industrial robot Yaskawa Motoman YR-SV3 6-axis painting robot with XRC Mini controller. Motoman YR-HP3 Lightweight design, 35kg , 3kg payload and 677mm reach. The rotation range is 360°, making it versatile for various workflows robot: Yaskawa Motoman YR-SV3-J30 year of manufacture: 2003.03 controller: Motoman XRC ERCS-SV3XL-RE00 year of manufacture: 2004.101 Giodpjv I Uknsfx Amuot Payload: 3 kg number of axes: 6 reach: 703mm robot weight: 45kg Repeatability 0.03 mm structure: articulated Robit Movement range: J1- ±170° J2 +150° - 45° J3 +190° - 70° J4 ±180° J5 ±135° J6 ±350° If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), Year of construction: 1997, Lifting capacity: 1.300 kg Max. sheetsize: 4.000 x 2.000 mm Gisdjwavukopfx Amuet No. of cups: 19 pieces Size LxWxH: 480 x 200 x 250 cm Weight: 1.400 kg

Condition: used, axle configuration: 2 axles, total width: 25,500 mm, total height: 12,000 mm, Year of construction: 2011, Equipment: ABS, = Additional options and equipment = - EBS - Electronic Braking System - Rear air suspension - Front air suspension = Notes = For enquiries regarding the vehicle, Mr. Seidel will assist you (by phone). Hüffermann HSA 18.70 P container chassis 40 mm towing eye, coupling heads, BPW axles, Wabco ABS, drum brakes, spring-loaded brake cylinders, permissible total weight: 18,000 kg, unladen weight: 3,418 kg, payload: 14,584 kg, tyre tread depth: 1st axle 10-11 mm, 2nd axle 11 mm Upon request, we can offer you a leasing or financing solution. Mr. Seidel will be happy to assist you by phone. Further information is available on our website. ... Subject to errors, changes and prior sale !!! - = Further information = Unladen weight: 3,418 kg Gedpfx Ajyfryljmueit Payload: 14,582 kg Gross vehicle weight: 18,000 kg Please contact Tobias Ebert for further information.

Condition: good (used), Work platform, ladder, scissor lift, aerial work platform, lifting platform, personnel lift, work basket -Work platform: for forklifts -Payload kg -Inner dimensions: 2355/1310/H1100 mm -Mounting: with safety bolt, see photos -Number: 2x stage available -Price: per piece -Dimensions total: 2455/1510/H1300 mm Gijdpfxjxapuhs Amuet -Own weight: 236 kg

Year of construction: 2010, condition: good (used), Working platform, riser, scissor lift, aerial work platform, lifting platform, passenger lift, work basket -Manufacturer: FE Eichinger, collapsible work platform for forklifts -Type: 1073.3 1200x1.14 -Payload 250 kg -Dimensions total: 1190/1080 / H1900 mm -Transport dimensions: 1190/1080 / H310 mm Gsdpfx Ajg Twi Eomuoit -Own weight: 100 kg

Condition: used, Year of construction: 2012, overall weight: 1,310 kg, load capacity: 205 kg, arm reach: 2,750 mm, controller model: IRC5, repeat accuracy: 0.05 mm, Payload: 0/205 Kg Arm reach: 2.75 mmNumber of Axis: 6 Repeatability: 0.05 mm Robot weight: 1310 Kg Mounting: Floor Giedpfeh D Sz Tjx Amujt

Condition: used, Payload: 0/235 Kg Arm reach: 2.55 mmNumber of Axis: 6 Repeatability: 0.05 mm Robot weight: 1310 Kg Mounting: Floor Giodsh Di Uyjpfx Amujt

Condition: excellent (used), Year of construction: 2010, Wittmann W853 Linear Z=4000mm , payload: 41,5 kg Number of axis: 3 X: 1500 mm Gsdpfxewnfmfo Amusit Y: 2600 mm Z: 4000 mm \+ C axis pneumatic Reach: 4000 mm Payload: 41 kg Robot has NEW CPU + batteries , fully tested by Wittmann technician in our showroom.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 250 kg, BIG BAG UNLOADER CAPACITY 2000 KG PAINTED TUBULAR FRAME STRUCTURE Gedpfx Ajwxrcuemuoit AISI 304 HOPPER WITH ADJUSTABLE SUCTION

Condition: excellent (used), functionality: fully functional, Glass packages unloader (grab) UNKNOWN producer UNKNOWN year of production Gedpfx Aox Ecrdjmuoit For jumbo size glass sheets (6000 x 32100 mm) Maximum lifting capacity: 3000 kg Very good condition As is Available immediately Cheap

Condition: excellent (used), Standard boiler Duisburg 10000kg/h 15,7 Bar +Weishaupt gas burner. Already dismantled ,Ready for collection Gisdpfonwit Sjx Amujt

Condition: good (used), Rapid Load 12 Bar feeder Bar Loader Turn diameter bed: mm Turn diameter support: mm Passage: 6-80mm Turning length: 150-1215mm X axis: mm Y-axis: mm Z-axis: mm Turning speed: - Rev/min Cone: Longitudinal displacement drilling head (X axis): mm Arm travel height (Y axis): mm Min distance column -- drilling spindle (X axis): mm Max distance column -- drilling spindle (X axis): mm Spindle diameter: mm Max drilling depth: mm Max drilling depth: x mm Bed dimensions: x mm Cutting length: mm Cutting thickness: mm Control: Fanuc Year of construction: 1997 Operating hours: Transport dimensions: 166x60x105 cm (LxWxH) Documentation available Location: Hamont-Achel, Belgium Rapid Load 12 Bar feeder Bar Loader Bed turning diameter: mm Support turning diameter: mm Throughput: 6-80mm Turning length: 150-1215mm Gedpfx Amsuhznbeujit X-axis: mm Y-axis: mm Z-axis: mm Speed: Rpm Taper: Drill head longitudinal displacement (X-axis): mm Arm height displacement (Y-axis): mm Min distance column -- drill spindle (X-axis): mm Max distance column -- drill spindle (X-axis): mm Spindle diameter: mm Max drilling depth: mm Max clamping: x mm Bed dimensions: x mm Cutting length: mm Cutting thickness: mm Control: Fanuc Year of construction: 1997 Operating hours: Transport dimensions: 166x60x105 cm (LxWxH) Documentation present Location: Hamont-Achel, Belgium Rapid Load 12 Stangenlader Bettdrehdurchmesser: mm Drehdurchmesserunterstützung: mm Opening range: 6-80 mm Drehlänge: 150-1215 mm X axis: mm Y-axis: mm Z-axis: mm Speed: - U/min Cone: Längsverschiebung des Bohrkopfes (X-Achse): mm Armhöhenverschiebung (Y axis): mm Minimum distance between sleeve and drilling spindle (X axis): mm Maximal distance between module and drilling spindle (X axis): mm Spindle diameter: mm Max. Drilling depth: mm Maximal machining wall: x mm Bettmaße: x mm Schnittlänge: mm Schnittstärke: mm Steuerung: Fanuc Construction year: 1997 Betriebszeiten: Transportmaße: 166x60x105 cm (LxWxH) Documentation verfügbar Standort: Hamont-Achel, Belgium

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2007 Throughput volume 130 m³/hour Gedsu Tha Ijpfx Amueit Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Gedpeu Thh Eefx Amujit Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2026, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete Gijdsw Ivqmjpfx Amujt essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2026, functionality: fully functional, pressure: 6 bar, warranty duration: 60 months, inner dimension width: 5,000 mm, inner dimension length: 10,000 mm, inner dimension height: 5,000 mm, filter area: 250 m², volume flow: 16 m³/h, Equipment: documentation/manual, lighting, Blasting house *up to 5 years warranty* for all blasting media made of a steel construction/isopanels with filter system, air circulation system, blasting media preparation, pressure blasting pot 200l automatically refilling, blasting hose with dead man's control, breathing air system, LED lighting, wall cladding 70shore 4mm fabric rubber, sweep pit bucket elevator. Blast media recirculation via sweeping pit with bucket elevator can be upgraded to cross conveyor screw with dosing hood across the entire width as sweeping pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blasting carriage with track bed, crane system, crane roof opening, etc. For glass bead blasting for stainless steel, can be upgraded with the correct magnetic drawer or electrically driven magnetic drum separator. When blasting with 2 different blasting media (ferritic and mineral), upgradeable with magnetic drum separator, final magnetization stage and second air separator for blasting media separation, cleaning. Gisdpfx Aju Ey Dlomuot Safety equipment: Emergency lighting battery, emergency stop switch in the cabin and outside, viewing window to the blasting chamber, door/door limit switch, dead man's control, pressure vessel quick venting Warranty up to 5 years on various components. 50 years of experience and more than 3000 systems in blasting machine construction

Condition: new, Year of construction: 2026, Blast house components. Flat conveyor floor, cross conveyor screw, bucket elevator, air sifting, sieve, blasting medium hopper, blasting unit, filter system, fan, air ducts, lamella suction wall, blow box, electrical control as a kit without assembly. Alternatively, the plant components can also be assembled by our specialist fitters on your premises. Gsdpfx Amshc T Nlsujit

Condition: excellent (used), Year of construction: 2007, AMADA LKI MP 300 LOAD UNLOAD AUTOMATION Godjyylqbopfx Amuoit Year 2007 LKI MP 300M automatic sheet loader / manipulator with 3000mm x 1500mm sheet capacity.

Year of construction: 2015, condition: used, Waste water neutralisation Capacity: 8 m3/h Operation / Control: Control cabinet with touch-screen display / WAGO Giedpjxbqr Djfx Amuet Features: Neutralisation vessel (37 hl); final control vessel (4,5 hl); caustic vessel; acid vessel; pumps; process measurement, instrumentation and control technology; control cabinet

Condition: used, Year of construction: 1991, consisting of: -SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m2) - Forerun tank 1200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank - Shell-and-tube heat exchanger - Compressed air reduction station -Control cabinet with operating panel Additional title: juice heating plant for pasteurization Capacity: 100 hl/h Perm. working overpressure: 16 bar test pressure 20,8 bar Gedpfx Aevcqy Uomusit Wärmeaustauschfläche: 21 m2 Length: 5,6 m Width: 2 m Height: 2,4 m Operation / Control: Control cabinet with operating buttons Material: Stainless steel Base construction: Frame Features: 2 x vessels; plate heat exchanger; pipe heat exchanger; 2 x product pumps; process measuring and control technology. various valves and other fittings

Condition: new, Year of construction: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB Gedjng Exaspfx Amueit OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Gsdpfx Aendn Agsmueit Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible Godpsnh R Ekjfx Amujit - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site