Used Wind Turbine for sale (1,571)

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. Lredoyx Uy Aspfx Aigor • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: ready for operation (used), Year of construction: 1997, year 1997, speed: 500 m/min, roll dimension: 450 – 1550 mm, Max diameter of unwinding roll 1500mm Max width 1300 mm Lsdoxwp Uvopfx Aigerr Min width 380mm Brakes - hydraulics and disc brakes Max weight of unwinding roll - 2000 kg

Year of construction: 2007, condition: ready for operation (used), A wooden window sash assembly line consisting of three main components is available. 1) Sash stop table with punching unit and Powasert automatic screwdriver. 2) Max Striffler glazing bead saw. 3) Ruchser RU-GOB-ES corner hinge and handle drilling machine, year of manufacture: 2007. Documentation available. An on-site inspection is possible. Package sale only. Lrodozi Eimspfx Aigsr

Year of construction: 1998, condition: ready for operation (used), An angular system for Weinig window and door production is available. Max. tool outside diameter: 320mm, max. tool flight circle: 232mm, slotted spindle length: 640mm, profiling and synchronized spindle length: 285mm-320mm, control: Siemens WS400. Including complete tooling and style window. Documentation available. Ljdpstq U A Iofx Aigsrr

Condition: used, gearing type: automatic, lifting height: 26,000 mm, Year of construction: 2024, operating hours: 849 h, Magni RTH 6.26 Telehandler, year of manufacture: 2024, operating hours: only 849h! Equipped with Magni quick coupler, pallet forks, radio remote control, work basket pre-installation, 3rd hydraulic circuit, air conditioning, radio, touchscreen display, ROPS/FOBS cab, engine: Deutz [100kW/136hp], scissor stabilizers, automatic self-leveling, 20km/h (optionally 40km/h), maximum lifting height: 25.8m, horizontal outreach: 22.2m, maximum lifting capacity: 6,000kg, weight: 19,600kg. Machine is in very good condition and immediately available! Optional for an additional charge: - 5t winch = €7,500 net Leasing or financing offers available on request. Mr. Mihm (Tel.) is happy to assist. For more information, please visit our website. Subject to prior sale and errors. Power steering, enclosed cab, protective roof = Additional Information = Engine type: Diesel Lifting capacity: 6,000kg Lrjdpjyfu Tuofx Aigjr Please contact Tobias Ebert for further details.

Year of construction: 1997, condition: good (used), I sell the multiple drilling machine with inserting KOCH WinDoor Year: 1997 Number of drilling spindles 1 (suitable for dowels 8x60mm) Number of inserting heads 1 Motorical axes adjustment Workpc. length 200-3500mm Workpc. width 20-200mm Workpc. height 30-100mm Lrjdpsfyn Tysfx Aigor Available immediately

Condition: used, windshield, windshield -Manufacturer: Scania, windscreen windscreen type 3734AGN 1877G -Order No.: 3000910 - 8013994 -Dimension: 2120/820/ thickness 6 mm Lredpfx Aioiyzpwsger -Weight: 24 kg -Transport dimension: 2310/930/H420 mm

Condition: used, Year of construction: 2018, gearing type: other, first registration: 01/2018, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Construction: Sliding platform, 2x winches (3t platform winch) and lifting frame, remote control. Year of manufacture cannot be determined precisely, no type plate is available! ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE. Subject to change, prior sale, and errors! Ljdov Rgkxepfx Aigjrr - .

Condition: used, Year of construction: 2020, max. workpiece length 3740 mm profile spindle 1 Stück main drive 15 kW Control CNC Felder Format4 Type Profit H500S 16.38 CNC Machining Center to be sold on behalf of our customer ----- - From a wood window manufacturing company. - Machine still connected and ready for demonstration - Without machining tools Technical description (summary, full text see PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Travel: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional C-axis locking - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in the X direction, 5 spindles in the Y direction, grooving saw in the X direction) Horizontal drilling unit with 6 spindles, 4 spindles in the X direction and 2 spindles in the Y direction. 1 groove saw in the X direction, max. diameter 120 mm - Tool changer with 24 tool positions on the right side of the machine stand max. workpiece diameter 240 mm max. tool height 370 mm - Tool changer for circular saw blade mounted on the boom/tool changer max. saw blade diameter 350 mm - Tool changer on the left side of the machine stand with 10 tool positions. Max. workpiece diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - 24-position tool changer mounted on the boom, moving in the X-direction Max. workpiece diameter 240 mm Max. tool height 370 mm - Moving pick-up area for chip deflector plate - 6 workpiece supports with s-motion position control - 2 machining areas for pendulum machining - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved machining Ledpfxoyq Sztj Aigjrr - Includes all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device - "WoodFLash" software Lamello Clamex P Macro Notching Macro software - "Greenline package" for reduced energy consumption ----- Price of the above machine on Inquiry! ----- NOTE VIDEO: Not an original video. The video is from the machine manufacturer and shows a machine of this type. (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.

Condition: used, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Magni Winch / W 6 I / 6 tonnes / suitable for RTH, TH & HTH 10.10 series / NEW Price: €11,990.00 net / €14,268.10 gross - Max. lifting capacity: 6,000 kg - Working cable length: 27 m - Cable diameter: 12 mm - Cable lowering speed: 19 m/min - Automatic attachment recognition: yes - Winch with homologated, swiveling load hook - Pressure roller and hydraulic end-stop for cable winding/unwinding - Includes metal transport frame This attachment is suitable for the RTH, HTH 10.10, and TH series. Product code: ATT-02-004 We have many other Magni attachments in stock and immediately available! Mr. Herden (phone) will be happy to assist you. On request, we are pleased to provide you with a financing offer. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. Lrjdpfoykht Eex Aigor We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Magni range for you! Subject to errors and prior sale! = More information = New: Yes Application: Construction Please contact Marius Herden for further details.

Condition: used, Slotted disks, window milling tools, indexable inserts, window construction tools -Slit disk milling tool for: wooden windows Lrjdpfxjb A S Tbs Aigjr -ZUANI LOGIFIX -Socket: Ø 50 mm -Weight: 6.8 kg

Condition: used, Security window, security enclosure -for machine tools, grinding machines, machining centers -rame: made of stainless steel Lsdsb A Ntlepfx Aigsrr -Dimensions: 387 x 438 mm -Frame: 475 x 425 mm -Glass thickness: 20 mm -Number: 8 discs available -Price: per piece -Weight: 6 kg/piece

Condition: new, empty load weight: 920 kg, maximum load weight: 2,580 kg, overall weight: 3,500 kg, loading space length: 5,300 mm, loading space width: 2,090 mm, tire size: 195/55r10c, *Cars* can be easily loaded onto a *tilting car trailer* designed as a *high-loader*, equipped with an *electric winch*. The trailer’s loading platform is tilted using a hand pump, ensuring secure stability. The license plate is folded down, and the lights are moved to the side, eliminating the need to handle heavy and bulky rails. After loading a *passenger car*, the loading platform is lowered by opening the pump valve. Ljdoip Hwhepfx Aigerr This car transporter not only impresses with its appealing design but is also popular due to its high-quality workmanship, ease of use, and stability. High-quality standard features make this *car transport trailer* even more attractive. As standard, the *car trailer* features hydraulics with a hand pump, two hydraulic cylinders for a stable platform, an aluminum floor, an electric winch with an adjustable bracket and battery, wheel chocks, tie-down points, a spare wheel with a bracket under the loading platform, an automatic support wheel, a very stable welded frame, and a V-shaped drawbar, all hot-dip galvanized. Technical details can be found below. We offer the following accessories for the car trailer: Tarpaulin and frame, car tie-down straps, tie-down straps, shock absorbers, TÜV certification for 100 km/h, toolboxes, and anti-theft devices. --- You can find all our cost-effective offers on our website. Nationwide delivery (except to islands) is possible! Please feel free to ask us about the prices. --- PKW-Anhänger-Center Ahrens, Moordeicher Landstraße 37, 28816 Stuhr near Bremen, Tel: 0, Fax: Collection times: Monday - Friday, [Time] Collection is not possible on Saturdays!

Condition: reconditioned (used), Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely checked before delivery ----- Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment path pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser aiming light for detecting the saw section Item 2: Rounding unit horizontal below ----- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9,000 rpm > Max. tool flight circle: 130 mm > Axial adjustment path mechanically coupled with Crosscut saw > Adjustment path radial pneumatically controlled on/off Length stop NC controlled ----- > Length 3500 mm > Electronic length stop Item 3: Tenon and slot spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 3500 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm Lrodpfxevu Hghs Aigor > Motor power: 11 kW Item 4: 1. Profiling spindle (same and opposite rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Item 5: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatic opposite the spindle controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??the synchronous spindle), Rung support bar from above in the area of ??the profile milling unit vertically on the right and profiling spindle. Pos. 6: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment range 125 mm, 8 positions Pos. 7: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 110 mm, 8-way turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Item 8: Profile milling unit/grooving unit from below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > Axial adjustment range 100 mm, 8 positions > Radial adjustment range 100 mm, ...

Condition: ready for operation (used), Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 40/50 mm Weinig Unicontrol 6 ----- Machine will be checked in our factory before delivery! Technical Data Summary (Please inquire about any additional accessories included) Item 1: Cut-off saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide light for identifying the saw cut CNC-controlled length stop ----- > Length: 3,600 mm > Electronic length stop including positioned cut-off saw Item 2: Tenoning spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (Stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3000 rpm > Maximum tool swing diameter: 320 mm > Spindle diameter: 50 mm Lredpfsxtvgkex Aiger > Maximum tool diameter: 360 mm > Motor power: 11 kW Item 3: 1. Profiling spindle (co-rotation and conventional) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 7.5 kW Item 4: 2. Profiling spindle ----- > Position: Vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g., glass-dividing muntins) Munch guide consisting of: Munch support strip from above in the area of ??the vertical right-han d profile milling unit and profiling spindle. Item 5: Horizontal top profile milling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Spindle speed: 5,850 rpm > Maximum tool swing diameter: 130 mm > Axial travel: 52 mm, indexed in 2 positions > Radial travel: 125 mm, indexed in 2 positions Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: Vertical right > Tool clamping length: 160 mm > Axial travel: 90 mm, indexed in 3 positions > Radial travel: 100 mm, indexed in 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Maximum tool swing diameter: 210 mm > Motor power: 3.0 kW Further features ----- > Electric feed height adjustment including mechanical digital display and manual feed bar clamping > Rebating device for tear-out-free rebating > Double part package > Return conveyor for 1-person operation: swivel conveyor > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC with Windows PC control/NEXUS Extraction nozzle diameter: ----- Crosscut saw 80 mm Tenoning spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Grooving device from above 80 mm Hardware spindle 120 mm -----...

Condition: used, machine/vehicle number: 3781, mileage: 105,247 km, power: 205 kW (278.72 HP), first registration: 12/2005, fuel type: diesel, empty load weight: 12,545 kg, overall weight: 14,200 kg, tire size: 445/70 r24, axle configuration: 4x4, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro3, operating hours: 4,606 h, operation weight: 37,300 kg, Equipment: ABS, all wheel drive, cable winch, crane, trailer coupling, Truck MB Axor 1828 with MKG HLK225HP loading crane Technical data: First registration: 12/2005 Mileage (read): 105,247 km Operating hours (read): 4,606 Power: 205 kW / 279 hp Unladen weight: 12,545 kg Permissible total weight: 14,200 kg Trailer load: 24,000 kg Differential locks Lrsdpfjgi T Suox Aiger Overall length: 6,500 mm Platform dimensions: L x W front: 1,330 x 2,470 mm rear: 1,640 x 2,470 mm MKG HLK225HP loading crane with remote control Load capacities: 2.50 m - 7,150 kg 6.50 m - 2,620 kg 10.40 m - 1,440 kg 14.30 m - 980 kg 16.25 m - 860 kg Well-maintained vehicle. With its all-wheel drive and agricultural tires, it is also suitable for rough terrain. Due to its compact design with an overall length of 6.50 m, it can be easily maneuvered on tight construction sites. The vehicle has two loading platforms. This means that the crane is not mounted directly behind the cab. This enables better weight distribution, improves stability during crane operation, and allows work to be carried out even over the cab. The axles can be completely locked by means of the differential locks, as with the Unimog. A hydraulic frame winch with a winding device is installed. This offer is subject to change; errors and omissions excepted.

Condition: used, Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig PC-Nexus Weinig Unicontrol 11 Window System with Extensive Tooling ----- Optionally available (at additional cost): - Weinig Univar 6 Rebating Machine (Price upon request!) - Götzinger PowerDrill Drilling and Milling Center for Windows and Doors (Price upon request) Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 11 Window System ----- Ljdpsy T R Tujfx Aigerr Includes existing tooling sets: - IV 67 (Wood and Wood-Aluminum) - IV 77 (Wood and Wood-Aluminum) - IV 90 (Wood) Cross-cut Saw ----- With laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; electronically variable spindle speed with brake: 3,000–6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal Bottom Rounding Unit ----- Motor with brake: 1.5 kW; Spindle diameter: 20 mm; Clamping length: 25 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Axial adjustment travel: mechanically coupled with cut-off saw Radial adjustment travel: pneumatically controlled Tenoning and Slotting Spindle ----- With hydraulically clamped outboard bearing Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,800 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position below table: 5–10 mm Radial adjustment travel: fixed 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Min. tool cutting circle: 140 mm; Max. tool cutting circle: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position below table: 5–10 mm 2 feed rollers opposite the spindle; axial adjustment pneumatically controlled (8 positions) Horizontal Top Profiling Unit ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Adjustment: pneumatic, to 8 positions (axial and...) radial 2. Profile Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: min. 140 mm, max. 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Indexed guide fence with muntin support strip 2 feed rollers (opposite the spindle); axially pneumatically controlled (8 positions) Vertical Profile Milling Unit (Right-hand side, at machine end) ----- Motor power (with brake): 3.7 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Tool cutting circle: min. 112 mm, max. 210 mm Adjustment: Pneumatic (8 positions—axial a...

Condition: used, Year of construction: 1999, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig PC-Nexus Weinig Unicontrol 6 with NC spindles ----- Machine available for inspection while still in operation until September 2026 Summary of technical data (please inquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally continuously adjustable > Number of tools: 1 unit > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for identifying the cut position > NC length stop mounted on the slotting table included; positioning of the cross-cut saw integrated into the control system. > Length 3500 mm Item 2: Tenoning and slotting spindle ----- > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm via NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (climb-cut and conventional-cut capable) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm via NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW Item 5: Horizontal profile milling unit (top) ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment range: 2 positions > Radial adjustment range: 2 positions Lrodpfezdk Hyox Aigsr Item 6: 3. Profiling spindle (hardware groove spindle) ----- > Position: vertical, right > Tool clamping length: 160 mm > Axial adjustment range: 3 positions > Radial adjustment range: 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Additional features ----- > Network-ready (online capability) > Rebating unit for tear-free rebating > Double-part processing package > Return conveyor system for one-man operation: slat conveyor > Screen-based control system > Angled window processing unit > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Excluding machining tools ----- Price of the above-mentioned machine available on request! ----- Optional extra: EUR 6,500.00 Note regarding used tools: We currently have used "Gold" series tools in stock (Stock No. #2790) Window tools (Gold series) for IV78 Wood and IV78 Wood/Aluminum Previously used on a Weinig Unicontrol 10; a jointing cutter is additionally required for use on a Unicontrol 6. Tool set for fixed-stroke or CNC spindle machines (80 mm and 95 mm stroke), (Tool set prepared for IV92 where technically feasible) Wood-aluminum tool set for fix...

Year of construction: 2001, condition: used, functionality: fully functional, Compost turner BACKHUS 10.10. Lrsdpfx Aiszudwtjgor Diesel engine: 264 hp Weight: 14.9 tons

Condition: good (used), Year of construction: 2019, Weinig Conturex C124-L CNC Window production machine (in left side infeed composition) Also available C124 R (Right-side infeed) year 2010 Description; Year of construction: 2019 Working width 40 - 260 mm Working height 25 - 150 mm Ratio of wood height to width max. 2:1 Powergrip clamping table Table support length 2x 2280 mm Workpiece length without follow-up cycle 175 - 2700 mm Workpiece length with follow-up cycle 2700 - 4500 mm Workpiece length with multiple follow-up cycle 4500 - 6000 mm Full description on request Available approx. end of 2026 / January 2027 (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Lrodpfxeyvh Eyj Aigjr Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2015, Biesse Uniline 4500 CNC processing center (i.e. for window & door frames) Lrodezp Hbqopfx Aigsr Description Biesse Uniline 4500 Machine nr; 1000004833 Year of construction: 2015 Machining lengths: 175 - 4,500 mm Number of milling motors: 1 Motor power: 19.2KW (25.7HP) Label printer: No Tool holder: HSK 63F Changer type: Fixed + movable Number of positions in toolchanger: Flexstore total 44 Software: BiesseWorks Office licenses: 1 x Fencing: Yes complete (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: new, empty load weight: 820 kg, maximum load weight: 2,180 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 5,020 mm, loading space width: 2,090 mm, color: silver, construction height: 1,000 mm, working width: 2,150 mm, Equipment: cable winch, Hydraulics, Automatic reverse drive, Drive-on ramp, Tiltable cargo bed, Electric cable winch / Full aluminium floor / Tiltable cargo bed / Wheel stop bracket / Spare wheel, Hot-dip galvanizing, * IMMEDIATELY AVAILABLE * incl. Electric cable winch / full aluminium floor / tiltable loading area / wheel stop bracket / spare wheel Technical data: - Make: Vezeko - Model: Imola - Vehicle type: Car transporter - Vehicle condition: New vehicle - First registration: without first registration - TÜV/HU: 2 years from first registration - Internal dimensions (LxWxH): 502 x 209 x 0 cm - External dimensions (LxWxH): 670 x 215 x 100 cm - Loading height of floor: 60 cm - Perm. Total weight: 3,000 kg - Unladen weight: 820 kg - Payload: 2,180 kg - Chassis: High loader (wheels under the body) - Tyres: 195/55R10C - Chassis: ALKO rubber spring axle - Support wheel: Yes, automatic - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Electric cable winch - Freely adjustable bracket - Manual remote control with cable - 12V battery under the loading area in the box - Battery is charged via the 13-pin plug from the towing vehicle, provided the socket is fully occupied. - Full aluminium floor, with anti-slip coating - 1 adjustable wheel bumper - very stable welded steel frame - tiltable loading area by means of hand hydraulics + 2 lifting cylinders - loading area 434 cm + 68 cm approach wedge - side panels color: black - wheel stopper bar / lashing eyes color: red RAL 3020 - frame cpl. hot-dip galvanized - many sturdy cross beams therefore high point load - additional longitudinal struts welded in throughout - 14 lashing eyes inside the cargo bed, rubber-coated (750 kg/pc.)) - spare wheel mounted under cargo bed - automatic reverse drive - ALKO overrun device and parking brake - ALKO coupling head - very sturdy V-drawbar REINFORCED - 13-pin plug - reversing lights - large rear lights plug - reversing lights - large dimensioned safety lighting - swiveling LED rear lights - integrated rear fog light - swiveling lighting - automatic center support wheel Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - anti-theft device - tarpaulin body - fixed box body - drop sides - additional wheel stoppers - storage box - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Lsdpfx Aiou Hryhogsrr

Condition: new, empty load weight: 740 kg, maximum load weight: 2,760 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,300 mm, loading space width: 1,630 mm, color: silver, construction height: 2,650 mm, working width: 2,470 mm, Equipment: cable winch, Light alloy rims, comfort package, hydraulics, automatic reverse, drive-on ramp, electric cable winch / drum size up to 280x165cm, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * incl. electric cable winch / drum size up to 280x165cm Designed for cable drums up to a diameter of 2800mm and a width of 1650mm. TECHNICAL DATA: - Make: Stedele - Model: KTT 35 - Vehicle type: Cable drum trailer - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 330 x 163 x 0 cm - External dimensions (LxWxH): 499 x 247 x 265 cm - Perm. Total weight: 3,500 kg - Unladen weight: 740 kg - Payload: 2760 kg - Chassis: Low loader (wheels next to the body) - Tires: 185R14C - Chassis: ALKO rubber suspension - Support wheel: Yes - 100km/h approval: Optional, can be retrofitted EQUIPMENT - Brakes: Yes - Number of axles: 2 - Locks: Eccentric locks - Tipping / lowering function: Tiltable at the rear - Overrun device/brake: ALKO - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, continuous, square tube - Mudguards: Aluminium chequer plate mudguards - Cable winch & winch bracket: Electric winch - Supports: Yes - Rear lighting: Incandescent lamps, lamps recessed in rear frame - Plug for lighting: 13-pin DESCRIPTION - Designed for cable drums up to a diameter of 2800mm and a width of 1650mm. - Standard pipe support approx. 80mm - Torsion-resistant chassis with solid support frame hot-dip galvanized - Easy operation of the support frame with or without cable drum - Barrier-free insertion of the cable drum - Backlash-free mounting and securing of the drum by fixing - Solid support wheel mount and rear support - Sturdy telescopic crank supports at the rear - Electric cable winch instead of manual cable winch for picking up cable drums - Battery installed in the box - Incl. Charging cable from towing vehicle via 13-pin plug - Very sturdy welded steel frame - Frame completely hot-dip galvanized hot-dip galvanized - robust aluminium chequer plate mudguards, walkable - automatic reverse drive - ALKO overrun device and parking brake - 13-pin plug - reversing lights - large reversing lights plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in rear frame - folding license plate holder Accessories can be retrofitted - please enquire: - Stedele micro pipe holder for 3 drums - battery charger - brake arm - 100km/h approval with shock absorbers - spare wheel - storage box - reversing light - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Lredpfx Aou Hr A Noigsr

Year of construction: 1986, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 530, Industrial Double-Drum Winder W04 – Winding Machine For sale: industrial W04 winding machine designed for winding flexible plastic products, profiles, tubes, cords, strips, or similar continuously extruded materials. The machine was previously used in production as part of an extrusion line. Basic information: Machine type: industrial winding machine Designation: W04 Year of manufacture: 1986 Double-drum design Drum 1 / Stop / Drum 2 / Reset controls Emergency stop button Traverse mechanism for even material distribution Adjustable operation Electrical control cabinet IMO iSmart controller Lenze frequency inverter 24 V power supply Mounted on a mobile steel frame This is an older, robust industrial machine. The electrical system has been upgraded during its service life. Condition and equipment are shown in the photos. Suitable for further use in production, refurbishment, or as a base for a custom winding application. Location: Ivanka pri Nitre, Slovakia Ledpfezu Nf Asx Aigsrr Price: €3,000 For further information or additional photos, please contact me via message.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 035-804, input voltage: 400 V, type of input current: three-phase, Equipment: CE marking, Year of manufacture 1996, the latest tools were acquired in 2024. Window production: wooden and wood-aluminum windows. Oppold 67 mm wood and wood-aluminum. Zuani 79 mm wood and wood-aluminum. Zuani 91 mm wood and wood-aluminum. Also, production of entrance doors and lift-and-slide doors. The production line is still fully assembled and functional. Ljdpfxezlytxo Aigorr If you have any questions or require further information, please feel free to send us a message or call us.