Used Weydemann Und Hasselkus Wsm-A for sale (71,006)

Condition: used, Year of construction: 2006, Overview This crate palletizing and depalletizing line was integrated in 2006 by Profipack Verpackungsmaschinen GmbH (Austria) around two Yaskawa Motoman NX100 articulated robots - one palletizing cell and one depalletizing cell - together with a Logipack vertical pallet strapper. It is still installed at a German brewery, where it palletized and depalletized crates for beer, CSD and mineral water production until the whole line was stopped. Because it served multiple product lines, it handles a wide variety of crate formats on Euro pallets. The machine can be visited on request. Technical data - Manufacturer / integrator: Logipack (vertical strapper), Profipack Verpackungsmaschinen GmbH (system integrator, Austria) - Robots: 2x Yaskawa Motoman NX100 articulated robots (palletizer + depalletizer) - Year of manufacture: 2006 - Machine type: crate palletizing and depalletizing line - Capacity: 33,000 bph (160 bottles per layer) - Pallet format: Euro - Crate formats: 5x4 - 400x300x300 mm / 6x4 - 400x300x270 mm / 5x4 - 400x300x210 mm / 4x3 - 355x275x345 mm / 4x3 - 400x300x330 mm / 5x4 - 355x275x255 mm / 5x4 - 400x300x290 mm - Controls: Siemens SIMATIC S7 PLC, B&R Power Panel HMI with ACOPOS servo drives, Danfoss VLT 5000 frequency drives, SEW MOVIDRIVE Equipment - Palletizer robot cell (Yaskawa Motoman NX100) with layer-gripper tooling - Depalletizer robot cell (Yaskawa Motoman NX100) with layer-gripper tooling - Logipack vertical pallet strapper - Pallet and crate roller/slat conveyors - Layer-forming / grouping table - Unloading table - Pallet magazine - Separate BMS-branded control cabinet - Safety fencing with light-curtain guarding Condition Iiodpfxjzk I N So Aatjf Used - complete, still installed; no longer in production (line stopped). Availability Available immediately. Location: Germany. Can be visited on request. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: good (used), Year of construction: 1999, operating hours: 95,239 h, functionality: fully functional, machine/vehicle number: 173937, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, mold height (min.): 250 mm, total length: 5,100 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,630 kg, Equipment: documentation/manual, The machine ran perfectly until the last day before the new machine was delivered to us. The machine is therefore in good used condition. Due to a lack of space in the injection molding shop, the machine is being sold and is no longer powered. The pump / injection unit / clamping unit are sealed. The machine manual is available Videos of the machine are available Pump operating hours: 95239 Automatic operating hours: 86082 Iijdpfx Aev D Nxloatjf Repairs from recent years: Filter replaced annually 05/2024 Fan in the control cabinet replaced 07/2023 New valve for Y201 and Y210 nozzle forward/backward 02/2023 New keypad installed. Field with motor and heater 12/2022 Ejector sealed. Injection unit sealed including new piston

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 523afbb3, Year of construction: 2019, workpiece weight (max.): 10 kg, workpiece length (max.): 250 mm, workpiece width (max.): 183 mm, workpiece height (max.): 150 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item on time by 20/12/2025! This lot offers a complete solution comprising a printer, washing unit, and sintering unit for auction! The machine is a demonstration model and has seen minimal use! TECHNICAL DETAILS Printing Process: Atomic Diffusion Additive Manufacturing (ADAM) Build Volume: 300 x 220 x 180 mm Layer Thickness: 50 µm – 200 µm Max. Part Size: 250 x 183 x 150 mm Max. Part Weight: 10 kg Sintering Capacity: 3,020 cm³ Sintered Area: 348 cm² Sintering Time: 26 hours Max. Temperature: 1,300 °C Washing Capacity: 18,356 cm³ Washing Volume: 356 x 254 x 203 mm Basket: Stainless steel washing basket Fluid: Opteon SF79, Opteon SF80, Tergo Metal Cleaning Fluid MACHINE DETAILS Printer Dimensions Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Washing Unit Dimensions Dimensions: 609 x 685 x 1,067 mm Weight: 136 kg Sintering Unit Dimensions Dimensions: 1,270 x 510 x 720 mm Weight: 136 kg Input Voltage: 240 V Input Current: 6 A Input Frequency: 60 Hz EQUIPMENT Dual-nozzle printing system Heated print chamber Iiedpfxexnp Has Aatof Vacuum-sealed print bed (new vacuum pump and vacuum silencer installed in 2022) Automatic leveling

Year of construction: 2003, condition: used, Clamping force: 300kN, tie-bar spacing: 270x270mm, cylinder diameter: D15, control: Arburg Control+, automatic operating hours: 63.212h, pump operating hours: 63.212h, cycles: 15.328.195. An on-site inspection is possible. Ijdpezun Upjfx Aatjif

Condition: good (used), Year of construction: 2000, Cast Clamping Angle Plates Manufacturer: Tos - STOLLE Year: approx. 2000 Isdsy Ix Ngspfx Aatjif 1x Clamping surface width: 1200 mm, height: 3000 mm, depth: 1200 mm, 12 slots: 20 mm Grid spacing: 250 mm, wall thickness: 75 mm, approx. weight: 3000 kg, price: €7,250 negotiable 1x Clamping surface width: 1300 mm, height: 2000 mm, depth: 1500 mm, wall thickness: 80 mm Approx. weight: 3000 kg, price: €5,250 negotiable 1x Clamping surface width: 680 mm, height: 800 mm, depth: 375 mm Grid spacing: 70 mm, slots for M16, approx. weight: 500 kg, price: €2,350 negotiable 1x Clamping surface width: 340 mm, height: 1000 mm, depth: 400 mm Grid spacing: 100 mm, slots for M16 thread, approx. weight: 500 kg, price: €2,150 negotiable

Condition: used, mileage: 705,000 km, power: 169 kW (229.78 HP), first registration: 03/1970, fuel type: diesel, number of seats: 34, next inspection (TÜV): 08/2026, color: yellow, Year of construction: 1969, 2 former Swiss Postbuses available as a package. Vehicle 1 Saurer L4C left-hand drive One of the last bonneted vehicles on a Saurer chassis. Bodywork by Ramseier + Jenzer. Iisdozbp Ulepfx Aatsf The vehicle underwent a complete professional restoration at Ramseier + Jenzer in 1991 (factory restoration). The previous owner had the vehicle for 40 years. Immaculately maintained and immediately ready for operation. 125 hp, 4-speed gearbox + overdrive, power steering, pneumatic doors at the front and rear, length 10,005 mm, height 2,980 mm, width 2,300 mm, 33 passenger seats + driver, 2 roof hatches, radio with microphone. Vehicle 2 Volvo chassis with Lauber body 23 passenger seats, automatic transmission, first registered in 1982, converted to a party bus, length 11,750 mm, 230 hp. Special package price: €99,000.00 Net export available. We make shipment worldwide.

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 243708, screw diameter: 15 mm, total length: 2,500 mm, total width: 1,500 mm, total height: 2,500 mm, overall weight: 1,700 kg, power: 39 kW (53.03 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 64 A, controller manufacturer: SELOGICA, control voltage: 230 V, ARBURG ALLROUNDER 220 S 180-70 injection molding machine - Rated current for motor heater: 57 A - Includes core puller, manufacturer: MARCZINKOWSKI Ijdpfszldp Rsx Aatsif Please note: the item must be picked up on September 3, 2026, at a date to be confirmed. FCA D-58507 Lüdenscheid - loaded onto a truck.

Condition: excellent (used), TBT T30 SERIES TABLE TYPE GUN DRILLING MACHINE Model T30-1000KTN Serial number 410.364.016 Year of manufacture, approx. 1980 Number of spindles 1 Drilling range in steel 4 - 30 mm (solid) Counter boring 40 mm Nominal drilling depth 1000 mm Slotted table size 850 long x 750 wide mm Table size overall 1100 long x 1000 wide mm Table cross movement 800 mm (approx.) Table vertical movement 400 mm (approx.) Drilling slide longitudinal travel 1450 mm Slideway width 250 mm Spindle speeds to approx. 9000 rpm Spindle motor 25 kW Total load 41 kW Supplied with: 2 off Whip guides. Ballscrew feed. 2 Axis DRO to table Cross and Vertical, DRO to drill slide. TS25-1000 Coolant tank. Drill bushes. Ijdpfx Aaszuxp Rotoif For Sale with Jet Machinery Ltd Jet Machinery Stock No: #27033 Machine Serial Number: 410 364 016 Cost: £17,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2013, 4mm Dia. - 16mm Dia Range of Drilling; Ijdey Ey E Repfx Aatsif Up to 3,000mm Length of Component; Double Axis; Overall Length Approx 11 Metres x 900mm Wide, (2) Sections - Headstock Bed Length Approx 5 Metres, Drilling Length Bed Approx 6 Metres; (1) 500mm Dia 4-Jaw Chuck, 120mm Bore with Troyke DL-20-B, 4th Axis, 500mm Dia. Precision Rotary Table; Pendant Control; Stand Alone Electrical Cabinet (Dimensions Approx 3,000mm x 500mm x 1,900mm High); Technidrill Coolant Filtration System consisting of LNS 'Turbo HB' Swarf Conveyor, FSI 'CBFP 11' Filter System & Oil Tank with High Pressure Delivery Pumps; Stand Alone Dimplex Koolant Koolers Chiller Unit with Controls (Dimensions Approx 700mm x 1,300mm x 1,850mm High, 2012);

Condition: used, Year of construction: 1999, functionality: fully functional, KALTENBACH Saw and Drilling Line – KBS 851 DGNC + APS 1003 – up to 1,000 mm – Year of Manufacture: 1999 General Information: Manufacturer: Kaltenbach Machine Type: Automatic saw and drilling line for steel profiles Bandsaw: KALTENBACH KBS 851 DGNC Drill Line: KALTENBACH APS 1003 Year of Manufacture: 1999 Condition: Used, fully functional Location: Germany Availability: Dismantling possible from mid/end of March 2026 Inspection: The system is operational and can be inspected under power Sale: Without guarantee or warranty Machine Description: For sale is a complete Kaltenbach saw and drilling system for processing heavy steel profiles. The line consists of a CNC-controlled bandsaw KBS 851 DGNC as well as a drilling unit APS 1003, including extensive infeed and outfeed roller conveyors and cross transfer conveyors. The system is currently in operation and has been reliably used in steel construction until now. It is ideally suited for efficient processing of beams and profiles in both series and project work. Typical Areas of Application: - Steel construction / hall construction - Metalworking - Beam processing (IPE, HEA, HEB, UPN, etc.) - Series and single-part manufacturing Technical Data: Bandsaw KBS 851 DGNC: - Maximum beam height: up to 800 mm - Mitre cutting: swivelable on both sides +45° / –45° - CNC-controlled length positioning - Automatic sawing mode Drill Line APS 1003: - Maximum beam height: up to 1,000 mm - CNC-controlled profile processing via drill portal - Suitable for web and flange machining Roller Conveyors & Material Handling: - Roller conveyor width: 1,000 mm - Infeed roller conveyor: approx. 15,000 mm - Outfeed roller conveyor: approx. 15,000 mm - Infeed cross transfer conveyor: approx. 4,000 mm - Outfeed cross transfer conveyor: approx. 4,000 mm Condition: - System is complete and fully functional - Currently in operation - Age and usage-related signs of wear - Sale as is - No guarantee or warranty Scope of Delivery: - Bandsaw KBS 851 DGNC - Drill line APS 1003 - Infeed and outfeed roller conveyors - Cross transfer conveyors (infeed and outfeed) - Control cabinet / operating unit - Existing safety devices - Documentation where available Dismantling & Loading: Isdpfx Aajyak Anetsif - Dismantling to be carried out by the buyer - Dismantling possible from the end of March 2026 - On site available: * Forklift truck * 2 gantry cranes each with 5 t lifting capacity - Good site access and loading conditions

Year of construction: 1990, condition: defective spare-parts repository (used), -1- used rotor body for SBM 16 22 6 or Hazemag AP5 wide. Including 6 blow bars type HAZ 846 b (380x85x2250 mm, approx. 548 kg each), needs repair (see photos), year of manufacture unknown. Weight approx. 10 t, dimensions approx. 2250 x 1600 x 1600 mm. Isdpfsy Au Nrox Aatsif

Condition: used, Year of construction: 2000, A machine for packaging containers such as bottles (beer, wine, beverages, oils) or cans into cardboard collective packaging. The containers are grouped and then wrapped with a cardboard blank and glued together to form a collective package. Manufacturer: SOTEMAPACK Model: WRAP-AROUND Year of manufacture: 2000 Capacity: up to 720 packages/hour (12 packages/minute) Control system: S7-300 Original technical documentation included. Iijdsywclwepfx Aatef Technical condition: used machine, in working order at the time of disconnection, condition as shown in the pictures.

Condition: used, Year of construction: 2018, Overview These fermenters (iso tank) were manufactured in 2018 by Germany BrauKon GmbH. The equipment consists of 3 fermenters, designed for beer fermentation. The tanks are still installed and connected to energy and are available immediately. The equipment can be visited in production on request. Technical data  Iisdpoywn Svjfx Aatef - Capacity: 10 hl each - Application: Beer fermentation - Configuration: 3 × iso fermenters  

Condition: good (used), WSM Stationary Screwing Unit Assembly and testing of components for car radios and navigation systems. The assembly station is enclosed in a protective housing. The service doors are equipped with monitoring switches with interlocks. The doors are locked during automatic operation and can only be opened during automatic stop or manually after pressing the "Doors" button on the control panel. Automatic operation cannot be started with a door open. Operational Sequence The station is loaded with the pre-assembled component via the transfer belt. The following describes the operation steps of the automatic station with a transfer belt. In normal operation, all three stations operate in parallel. - Positioning the test unit (WT) with the pre-assembled module in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the test unit onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.2 - Positioning the screwdriver and screwing the front PCB in place Iedpfeibichsx Aateif - Lowering the test unit (WT) onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.3 - Lowering the light shield and making contacts, adjusting the carrier with the test sensors from below - Type-dependent testing of the SD + CD slot lighting and buttons - Functional test of the CD eject button - Lowering the test unit (WT) onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen. and can be repaired if possible. For this, the system is switched to manual operation and the doors are opened. After the repair and restarting the automatic system, the workpiece carrier is tested again in the station. If a repair is not possible (e.g., due to a screw error), the workpiece carrier is marked as NIO (Not Okay) in the control system and is not processed further. Manual NIO marking and rejection is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de More assembly stations, new and used, can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2014, Overview  Iedpjwzb T Ujfx Aatoif This set of 6 isobaric fermentation tanks was manufactured in 2014 by the Spanish company Talleres Perman S.L.. Each tank has a capacity of 1,000 liters and is designed for fermentation and maturation under pressure, ideal for beer, cider or sparkling wine. The tanks have integrated cooling jackets and have decorative wooden cladding on the outside, which can be removed if necessary. The tanks are for sale as a planned increase in production was ultimately not realized. Available immediately. Technical details  - Capacity: 6 x 1,000 liters - Working pressure: up to 3 bar - Diameter: approx. 125 cm - Height: approx. 190 cm - Base design: conical base with 30° angle - Type: Isobaric fermentation and maturation tanks with cooling jacket - With integrated cooling jackets - With decorative wooden cladding (removable) Scope of delivery  - 6 x Talleres Perman DI1 | Year of construction 2014 isobaric fermentation and maturation tanks

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Overhauled: July 2026 Excellent condition, very few operating hours (1540 hours of erosion time) EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld, multifunctional handheld operating device Manual eroding with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 amps (60 amps peak current) High-speed jump: max. 18,000 mm/min Travel ranges (X, Y, Z): 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode holder: min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Work table (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Overhang load: 200 kg Iedpfszvctpsx Aatoif Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: Erowa, type UPC production chuck CO2 fire extinguishing system Cooling unit

Condition: new, Year of construction: 2025, RST-LC1500 Advantages of the 2D Ultra-Wide Laser Cleaning Machine: A: 600–800 mm wide cleaning with ultra-wide coverage. B: Equipped with imported high-performance SOC controller. C: Various selectable 2D cleaning patterns; 14 languages available. D: Complies with European safety standards; triple safety mechanisms. E: Equipped with multiple parameter databases tailored to various operating conditions. F: High-protection safety design. G: Easy maintenance and long-term stable operation. Machine Technical Specifications: Power supply 220V 50Hz/60Hz Output power ≤5.5 kW Operating temperature 10–40°C Cleaning area Cleaning width ≤ 800 mm Cooling method Air cooled Focal length 500/800/1000 mm Weight of laser cleaning head 900 g Laser safety class Class 4 Machine dimensions 640 × 330 × 620 mm Machine weight 46 kg Packaging dimensions 850 × 650 × 900 mm Package weight 88 kg Laser Generator Specifications: Parameter name Specification Laser generator model MFSC-1500M Power adjustment range 10%–100% Laser wavelength 1080 nm Modulation frequency 1–5000 Hz Output power instability ±1.5% Optical fiber cable length 10 m Machine Configuration: Component name Brand Description Machine body DPL Professional cleaning cabinet Laser generator MAX MFSC-1500M Laser head Hydraulic / Brand 2D Super Wide Angle Chiller system Bingyue 1500W-S Price: RST-LC 1500W (230V).....€9,500 Warranty: Two-year warranty on the laser source, One-year warranty on other machine components. No warranty on consumable parts. OPTION: TERMS AND CONDITIONS Training and Installation: Iiedew Ix Dpopfx Aatsf 1 day €600 (incl. arrival and departure) Transport Costs: Air freight: €1,200 / Sea freight: €650 Delivery: 2–3 working weeks after payment receipt for air freight 5–6 weeks by sea freight Payment: 100% due upon order and before shipping (air cargo or by sea)

Condition: good (used), Year of construction: 2006, Built in 2006 Size max 670x390 mm min 205x140 mm Speed 3.900 c/h Description: - with round corner device - Automatic setting - Motorised setting - Automatic case counter - Board pre stacking conveyor - Board cutter: PS - Centre strip infeed (flexible) - Waste chopper - Cloth feeder: Non-Stop Iiodpfx Aszlbdreatsf - Glue unit - Preheated glue tube - Viscosity control - Device for producing padded cases - Pressing station - Stacking delivery

Condition: used, Year of construction: 2012, Overview  This fermentation tank package was manufactured between 2012 and 2019 by Oxinox and Slowbeer. It consists of isobaric and atmospheric stainless-steel fermenters with different capacities. Personal inspection is possible. Iedpsyg R Auofx Aateif Technical data  - Total tanks: 8 units - Isobaric tanks: 5 units - Atmospheric tanks: 3 units - Material: Stainless steel (316-L for Oxinox tanks) Scope of Delivery  - Isobaric Fermenter (4x) | Oxinox | Oxi-19 | 2019 | 1,600 L each - Atmospheric Fermenter (3x) | Slowbeer | Plano 1200L | 2012 | 1,200 L each - Isobaric Fermenter | Oxinox | Oxi Clooper | 2016 | 1,400 L  

Condition: used, Year of construction: 2000, Overview These HERPASA self-emptying stainless steel tanks, designed as 30,000 liter autovaciante tanks, are suitable for wine production and similar beverage processing applications. The tanks are installed as a group of vertical stainless steel vessels and are equipped with bottom cone discharge systems for efficient product emptying and solids handling. The tanks are manufactured from AISI 304 / AISI 316 stainless steel and feature a 45° bottom cone, rectangular access doors, cooling jackets, temperature monitoring, product connections, and an internal mechanical extraction / rotating discharge system. The available drawings and photos show a robust industrial tank configuration with cooling surfaces, lower discharge equipment, and external piping for wine circulation or transfer. The tanks are particularly suitable for applications such as fermentation, storage, cooling, wine processing, and controlled product discharge, especially where self-emptying functionality is required. The visible installation includes at least four tanks of similar construction. Technical Data - Manufacturer: HERPASA - Year: 2000 - Tank Type: Self-emptying vertical tank / autovaciante tank - Application: Wine / beverage processing - Capacity: 30,000 liters - Material: Stainless steel AISI 304 / AISI 316 - Tank Diameter: approx. 2,800 mm - Total Height: approx. 7,050 mm - Bottom Cone Angle: 45° - Cooling System: Upper and lower cooling jackets - Upper Cooling Jacket Surface: approx. 8.35 m² - Lower Cooling Jacket Surface: approx. 4.4 m² - Cooling Jacket Connections: R 3/4" water inlet / outlet - Temperature Measurement: Thermometer, range 0 to +60°C - Probe Connection: R 1/2" sleeve - Discharge System: Bottom discharge with extraction system - Internal Equipment: Rotating wine diffuser / internal extraction or sweeping mechanism - Access Doors: Rectangular manways / inspection openings - Connections: NW50 and NW65 product connections - Safety Equipment: Safety valves 2 1/2" - Installation: Group of vertical stainless steel tanks with external pipework - Condition: Used, installed in industrial winery environment Iisdpfx Aey Uc A Reatjf

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 58,782 h, controller model: Siemens Sinumerik 840D, laser power: 3,200 W, working length: 3,000 mm, working width: 1,500 mm, pallet changer: automatic, No minimum price – guaranteed sale to the highest bidder! Iisdpfx Aaezrfqietef The machine must be dismantled in week 35. However, collection is possible in weeks 36 and 37. TECHNICAL DETAILS Laser type: CO₂ laser Laser power: 3.2 kW Working length: 3,000 mm Working width: 1,500 mm MACHINE DETAILS Control model: Siemens Sinumerik 840D Laser hours (laser on): 107,255 h Laser hours (beam on): 58,782 h EQUIPMENT Automatic pallet changer

Condition: used, Year of construction: 2020, Overview These fermentation tanks were manufactured in 2020 by the German company Speidel. They are CE-certified, equipped with a cooling jacket, and rated for up to 2.5 bar pressure. The tanks are in good condition and available immediately. Technical data  - Capacity: 2 × 1,250 liters - Pressure rating: 2.5 bar - Cooling jacket: Yes - Certification: CE Scope of Delivery  - 2x 1,250-liter fermentation tanks Iijdpfxowfq Dks Aatof  

Condition: good (used), Various quick-change tool holders, total of 42 pcs: 7 pcs WDL 4/50 16 pcs WDR 4/40 10 pcs WDL 4/40 3 pcs WB 4/60⌀ 3 pcs WBW 4/60⌀ Ijdpjy N S Ifjfx Aateif 1 pc WBW 23/60⌀ 2 pcs without type Please let us know which items you are interested in so that we can provide you with an offer.

Condition: used, Year of construction: 2019, Overview This lot comprises two VIG pressure tanks of 5,000 litres each, built in 2019 by VIG Vertrieb Industrieller Güter (Kreuztal, Germany). The vessels are CE-marked pressure vessels according to EC pressure equipment directive 2014/68/EU and were last used as activated carbon filters in a brewery’s water treatment. Each tank is fitted with a filter star; the filter candles show light damage. The tanks are interconnected with DN 65 piping and come with butterfly valves for cleaning, draining and shut-off as well as vacuum/check valves. With their young year of construction and availability as a pair, the vessels suit filtration and pressure-holding duties in breweries and beverage plants alike. Technical data - Manufacturer: VIG Vertrieb Industrieller Güter (Kreuztal, Germany) - Year of manufacture: 2019 - Number of tanks: 2 - Volume: 5,000 l per tank - Max. operating pressure (PS): 6 bar - Test pressure (PT): 7.8 bar - Operating temperature (TS): 0 - 50 °C - Pressure vessel per EC directive 2014/68/EU, CE-marked - Front manhole on each tank Equipment Iodpfx Aajzpaiueteif - Filter star with filter candles in each tank (candles with light damage) - Interconnecting piping DN 65 - 3x M&S butterfly valves (cleaning, draining, shut-off) - 2x vacuum / check valves Condition Used - good overall condition in line with the young year of construction. The filter candles of the filter stars show light damage. The tanks are installed indoors. Availability Immediately. Location: Germany.

Condition: good (used), Year of construction: 1993, 1 x Graule Crosscut and Mitre Circular Saw Type ZS 170 Iiedoyxxzwepfx Aatof Technical data: - Motor: 400 V / 3.0 kW - Speed: 3500 rpm - Cutting length: 410 mm - Cutting width: 410 mm at 90° / 290 mm at 45° - Cutting height: 170 mm at 90° / 115 mm at 45° - Mitre range horizontal: 45°-90°-25° - Saw blade diameter: 420 mm - Extraction port diameter: 100 mm - Weight: 120 kg Location: ex-stock 54634 Bitburg - immediately available -