Used Weingarten De 200.15 for sale (19,176)

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Iodpeu Rwa Iofx Amietg Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, axle configuration: 2 axles, first registration: 07/2015, suspension: air, tire size: 425/65r22.5, wheelbase: 1,310 mm, Year of construction: 2015, Applicable material: Concrete Tyre size: 425/65r22.5 Suspension: air suspension Drive: Wheel Empty weight: 7.070 kg Itsdpfx Amjuc Aqmeisg Carrying capacity: 25.930 kg GVW: 33.000 kg

Condition: used, axle configuration: 2 axles, first registration: 07/2014, suspension: air, tire size: 425/65R22,5, wheelbase: 1,300 mm, Year of construction: 2014, Applicable material: Concrete Tyre size: 425/65R22,5 Iodpjuc Ehnefx Amietg Suspension: air suspension Drive: Wheel GVW: 36.000 kg

Condition: used, Year of construction: 1992, Manufacturer : De lama Model: DLST/L Class 100 Year : 1992 Type: Dry heat oven for sterilisation and depyrogenation.   Volume: 1 m3 Materials : Polished stainless steel - Sterilisation (160 - 180°C): Reduction of micro-organisms and their by-products by up to 12 log Iedpjx Rz N Uefx Amiotg - Depyrogenation (220-250°C): Destruction of pyrogens and endotoxins inside materials - Horizontal laminar flow - Double door (new) - Electric heating - 2 trolleys - Olympia/EXP3: Control, regulation, management and recording system with high-speed processor. Possibility of designing the oven to withstand operating temperatures of up to 300°C in continuous service, thanks to the use of HEPA filters with a special sealant. Main applications : - empty glassware (e.g. vials, ampoules, bottles) - stainless steel equipment (e.g. trays, machine parts) - moisture-sensitive materials - basic thermostable pharmaceutical products and chemical compounds - non-aqueous liquids (e.g. oils, glycerines, etc.)

Year of construction: 1985, condition: ready for operation (used), Press force: 100t, stroke rate: 60/min, ram stroke: 8mm-137mm, ram adjustment: 80mm, throat depth: 375mm, table dimensions X/Y/Z: 800mm/630mm, machine dimensions X/Y/Z: approx. 1500mm/2400mm/3500mm, weight: approx. 8800kg. An on-site inspection is possible. Isdpfx Asyu T Dqsmietg

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, pressing force: 200 t, stroke length: 400 mm, table width: 1,600 mm, table length: 1,400 mm, working height: 730 mm, Equipment: safety light barrier, Müller Weingarten press line: KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons Itedpjv Hqnasfx Amisg KE 200-16/14.5.1 - 200 tons The presses have a common housing and fan system. The remaining elements are independent, which will allow you to work on the presses individually. Also, each press is controlled individually Press in very good technical condition for sale from a liquidated press in Poland Modernized in 2018-2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller Weingarten press line KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons The presses have a common covers and fan system. The rest of elements are independent, which allows for individual work on the presses. Also, the control of each press is individual A presses in very good technical condition for sale from a liquidated stamping shop in Poland Modernizes during 2018 -2023 New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 1959, functionality: fully functional, pressing force: 400 t, stroke length: 450 mm, table width: 2,050 mm, table length: 1,500 mm, Weingarten OK 400.21.45 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Ijdpfxev E Rm He Amietg Possibility to check the machine in operation - The press is still connected to the power supply. Weingarten OK 400.21.45press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), functionality: fully functional, Box forming Iodpju Ivdtjfx Amistg Inner bag thermoforming Pasta filling Top filling Sealing

Condition: used, Ram, rams for an eccentric press, single column press, punching machine, single column eccentric press, eccentric press - single column, press -Spare part: comes from a Weingarten eccentric press -Stroke adjustment: 10-80mm -Plunger area: 320 x 65 mm -Plunger mount: O 40 mm Ijdsd Nzg Ropfx Amistg -Plunger adjustment thread: M64 x 6 mm -Plunger adjustment ball head: approx. 92 mm -Dimensions: 875/320/H190 mm -Weight: 164 kg -Pressure unknown

Condition: used, Punch, pneumatic punch, punching machine, punching device, hole punching machine, pneumatic hand punch -Manufacturer: DE-STA-CO, pneumatic punch -Type: 040 0210 -built-in stamp: Ø 2.5 mm -Max. Projection: 25 mm -Dimensions: 190/200/H510 mm Ijdpfxefwx Uys Amiotg -Weight: 24kg

Condition: good (used), pneumatic power clamps, horizontal clamps, compact clamps, clamping devices, pneumatic power clamps -Type: 82L32-143C8H0 Itjdeb A H E Iepfx Amisg -Quantity: 4 available -Price: per piece -Weight: 2.1 kg/piece

Condition: new, functionality: fully functional, machine/vehicle number: 49256, empty load weight: 6,510 kg, overall weight: 6,510 kg, color: blue, Year of construction: 2022, inner diameter: 2,500 mm, tank capacity: 30,000 l, New fuel tank with capacity of 30.000 liters Build in 2022 Volume 30.000 liters Isdpfx Aow Axrkomietg diameter 2500mm Weight 6510 kg coating C3+Pi Material S235JR NEN-EN 12285-2

Condition: good (used), functionality: fully functional, pressing force: 300 t, total length: 1,200 mm, total width: 2,800 mm, total height: 3,500 mm, ID105830 Hydraulic press Brand: Van De Graaf Type: HVK-300 Capacity: 300 tons Itjdpfx Ajwhc H Asmiog

Condition: good (used), Code: 0118 Brand: DE STEFANI Model: MV Automatic polishing machine for edges for polishing polyester, polyurethane and other paints Features: Track drive system with rubberized skids Manual upper presser with rubberized wheels Adjustable support bar for wide pieces Composition: 1° Group - N° 2 adjustable brushes - Motor Hp 4 2° Group - N° 1 Brush - Motor Hp 2 Working surface height mm 870 Feed speed 5 to 25 mt/min Working length min mm 150 Working height min/max mm 10/100 Working width min 50 Protection cabin Electrical cabinet Iedpfswiv Dksx Amiotg Overall dimensions mm 2700 x 1000 x 1250 h Weight kg 1500

Condition: excellent (used), Semi-automatic pallet wrapper Inventory no. 3701 Manufacturer: de Wit Model: WP 2 * Turntable positioning via fixed stop * Adjustable number of bottom and top wraps * Turntable diameter: 1650 mm * Max. wrapping height approx. 2400 mm * Suitable for Euro pallets and block pallets!!! * Own weight approx. 500 kg Itsdpfxjyb A T Ue Amieg

Condition: excellent (used), Semi-automatic pallet wrapper Isdpfxsya Iu Ie Amietg Inv. no. 3589 Manufacturer: de Wit Type: WP 2 Year of manufacture: 2007 * Turntable positioning via fixed stop * Adjustable number of bottom and top wraps * Turntable diameter: 1650 mm * Max. wrapping height approx. 2400 mm * Net weight approx. 500 kg * Suitable for Euro pallets and block pallets!!! * Inclusive ramp!!!

Condition: excellent (used), Semi-automatic pallet wrapper Inv. no. 3587 Manufacturer: de Wit Model: WP 2 Year of manufacture: 2008 * Turntable positioning by fixed stop Ijdoya Iuujpfx Amietg * Adjustable number of bottom and top wraps * Turntable diameter: 1650 mm * Max. wrapping height approx. 2400 mm * Suitable for Euro pallets and block pallets!!! * Own weight approx. 500 kg

Condition: used, functionality: fully functional, machine/vehicle number: PT1500, Wanted: De Jong PT1500 Passenger-Goods Lift For an ongoing project, we are urgently looking for a De Jong PT1500 passenger-goods lift. Required specifications: • Suitable for transporting both passengers and goods • Lifting capacity approx. 1,500 kg • 400 Volt drive • Robust, industrial-grade construction • Suitable for professional construction site use • Complies with current safety standards We are open to: • Used Itedex Spg Dspfx Amieg • Complete lift or set If you have a De Jong PT1500 available, we would appreciate your offer including price, condition, and availability. Please respond with photos and technical details.

Condition: used, Technical details: plate width: 1000 mm plate thickness: 3,0 mm smallest sheet thickness: 0,5 mm distance between columns: 920 mm Number of Straightening rolls: oben 4x unten 4x Stück / pieces roll diameter: ca. 75 mm number of rollers: 2 oben und 2 unten St. weight of the machine ca.: 6,5 t dimensions L x W x H: 3,8 x 2,2 x 2,1 m This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 pull-out rollers Ø 110 x 480 mm, 2x top adjustable approx. 20 mm and 2x bottom, hydraulic Roller support Infeed height 1400 mm Iodovgbgaspfx Amijtg Hydraulic system equipment Operated externally Recommendation: complete conveyor system (decoiler + loading device + straightener with hydraulic feed) for sale with optional stock no. 0100572. *

Condition: used, Technical details: plate width: 800 mm coil weight: 12 t sheet width - max.: 800 mm sheet width - min.: 300 mm thickness of strip/band: max. 5,0 mm band speed: 4,5 / 25 m/min work height max.: 1700 mm Payload: 12,0 to (Coil) Weight approx.: 7,3 + 6,62 t dimensions of coil: 3,2 x 1,9 x 2,7 m dimension machine xH: 2,5 x 2,6 x 2,45 m Decoiler with loading device Can optionally be sold together with stock no. 0100571. straightening unit: Infeed rollers: 2 x Ø 144 x 850mm Straightening rolls: 3 x bottom rolls, rigid, Ø 100 x 850mm, 30mm adjustable Itedpfxeu Ic Avs Amisg 3 x top rollers, Ø 110 x 850mm; 30 mm adjustable Coil unwinding machine: Outer Ø 1.500mm Strip width max. 800mm Load capacity max. 12 to Clamping Ø 470 - 630 / 570 - 730mm Transport unit LxWxH: 1700 x 1500 x 1000mm; crosswise running, with prism support 1000 x1000mm Machine will be offered and sold with Stock no. 0100521 as a decoiling and streightening line. *

Condition: used, Year of construction: 1974, functionality: fully functional, pressing force: 63 t, stroke length: 100 mm, ram adjustment: 63 mm, We offer this used Weingarten A 63 eccentric press, year of manufacture 1974, including punching tool. Ijdoyryt Tspfx Amietg Pressing force: 63 t Strokes per minute: 120 Ram stroke: 8–100 mm Ram adjustment: 63 mm If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: used, Technical details: Total force (nominal): 1000 to Clamping surface (left-right): x mm Clamping surface (front-back): x mm table surface area: 4500 X 2400 mm Total force (nominal): 2-3-4-5- Presse - 1000 to. to table surface area: 2-3-4-5- Presse 4500 X 2200 mm Last overhaul 2010/2020, consisting of: Iodpfx Ajx Ag Azomistg Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface and drawing slide 2,150 mm, blank holder force 400 t, stroke 600 mm, adjustment 350 mm, clear height between table surface and blank holder 1,950 mm, max. drawing depth 300 mm, 14 strokes/min, Siemens control unit, operating panel by Baluff, table size 3,200 × 2,200 mm, system no. 0185100 Gripper automation, consisting of: 2 press-mounted blank grippers, system no. 0602400, 0602500, with turning table and turning device Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 6031AE4.084, order no. 7810011, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, control by Siemens Press automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0602600, Double-column press, manufacturer Raskin, type 0631AE4 Year 1979, SN 0631AE4085, order no. 7810012, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control, system no. 0185300 Blank automation, consisting of: 2 grippers, system no. 0602800, 0602900, with tilting and turning table Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 06031AE4.086, order no. 7810013, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control Blank automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0603000, Double-column press, manufacturer Raskin, type 06031AE4 Year 1979, SN 6031AE4.087, order no. 7810014, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control 6

Condition: used, Technical details: Itjdpfox Ag Epex Amijg Total force (nominal): 800 to Clamping surface (left-right): x mm Clamping surface (front-back): x mm table surface area: 3200 X 2200 mm Total force (nominal): 2-3-4-5- Presse - 600 to. to table surface area: 2-3-4-5- Presse 3100 X1900 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface and drawing slide 2,150 mm, blank holder force 400 t, stroke 600 mm, adjustment 350 mm, clear height between table surface and blank holder 1,950 mm, max. drawing depth 300 mm, 14 strokes/min, Siemens control unit, operating panel by Baluff, table size 3,200 × 2,200 mm, system no. 0185100 Gripper automation, consisting of: 2 press-mounted blank grippers, system no. 0602400, 0602500, with turning table and turning device Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 6031AE4.084, order no. 7810011, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, control by Siemens Press automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0602600, Double-column press, manufacturer Raskin, type 0631AE4 Year 1979, SN 0631AE4085, order no. 7810012, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control, system no. 0185300 Blank automation, consisting of: 2 grippers, system no. 0602800, 0602900, with tilting and turning table Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 06031AE4.086, order no. 7810013, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control Blank automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0603000, Double-column press, manufacturer Raskin, type 06031AE4 Year 1979, SN 6031AE4.087, order no. 7810014, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control 6-ax

Condition: used, Year of construction: 1995, material width 650 mm coil weight 7,5 t material thickness 0,6 - 4,0 mm coil internal diameter 460 - 530 (630) mm Itedpov Ehaqefx Amiog coil external diameter 1300 mm material cross-cut 1300 mm² no. of straightening rolls 9 straightening roll diameter 60 mm speed 1 - 30 m/min power requirement 30,0 kW Straightening machine KOHLER 50.650/9 with infinitely variable drive, driven straightening rolls, hardchromium-plated rolls, motoric adjustment of the roller cassette Decoiler KOHLER 7500.1 with auxiliary drive, hydraulic centralized expansion, hydraulic snubber roll, attachment jaws for expansion of the inner diameter to approx. 580 - 630 mm, motoric lateral movement, hydraulic lifting table Servo roll feed WEINGARTEN WEP 65 coil loop control via light guard

Condition: used, Year of construction: 1980, Pressure capacity 1,250 kN Adjustable stroke 20 - 140 mm Itodpfx Amsrm Ntpsisg Stroke rate 70 1/min. Further data and pictures on request the press is currently not functional and must be mechanically and electrically overhauled