Used Waste Compactor, Baler, Waste Baler for sale (3,552)

Condition: ready for operation (used), Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Hjdpfx Aox D U N Ssbaop Model: HL 4010 Year of manufacture: 2012

Condition: used, Electrical waste bins Dimensions: (W x D x H) 595 x 722 x 1500 mm Hsdpfju R Uiasx Abasp Machine weight 112 kg Power: 100-240 V. 50/60 Hz Compaction ratio up to 7:1

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 30 t, Tested, cleaned, full service was carried out. Fully equipped, ready to use! Hsdpfxsyizpqo Abasp

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, pressing force: 50 t, Fully functional Bramidan B50 baler, serviced, complete set - hook, strap rolls. Hsdpfx Abjxg Tk Tsasp

Condition: excellent (used), Year of construction: 2015, operating hours: 97 h, functionality: fully functional, pressing force: 10 t, Fully serviced, fully equipped and ready to use. New oil. 5 units in stock. Hedsw Ey Dtspfx Abaop

Condition: excellent (used), Year of construction: 2012, Tested, cleanded, full service was made. New oil. We have two Orwak 5030 balers. Last photo - green, refurbished 2017 - 2000 Eur. Hsdpfxjrxfn Us Abaep

Condition: good (used), functionality: fully functional, machine/vehicle number: 004, bale weight: 5 kg, power: 3 kW (4.08 HP), empty load weight: 130 kg, Used THERMOPERS, model TO6 the compact plastic waste baler for soft thermoplastics, such as wrapping and shrink films, and to process it into bales. Serial number 004. The Thermopers is the solution to handle the plastic waste stream efficiently. The material can be loaded into the Thermopers directly. When the Thermopers is full it can be closed and started, the rest of the process is fully automatic and silent. The inserted material is compressed and sealed into an easy-to-handle package of approximately 5 kg. Characteristics The volume of the plastic films is reduced by 90% with the Thermopers. Thanks to the compact size of the Thermopers and the connection to a standard 230 Volt socket, the machine is easy to apply everywhere. The Thermopers is easy to operate and the status of the compaction process is clearly displayed by LED indication. The drive of the Thermopers is fully electric and low in maintenance. The size of a package is 60 x 30 x 10 cm and has a weight of approximately 5 kg. Operation The plastic waste material can easily be loaded into the machine via the insertion valve. When the machine is fully loaded, the insertion valve is closed and the machine is started. The plastic material is compressed by a combination of pressing and heating, whereby the outside of the plastic material is sealed around the package as a mantle. Thereafter the package is cooled, and the pressing mechanism will return. When ready, the machine gives an audio signal and the compacted package can be removed. After this the machine can be used again instantly. Advantages • Easy to operate • Fully automatic and silent • Compact machine • 90% volume reduction • Prevents drifting of material • Less storage • Less transport, resulting in a reduction in CO2 emissions • Higher returns / lower costs • Low maintenance • In accordance with machinery directive, CE marked Technical data Width: 70 cm Depth: 50 cm Height: 128 cm (excluding press rods) Height: 208 cm (including press rods) Weight: 130 kg Mains voltage: 230 Volts Power: 3 KW Energy consumption: approximately 1 kWh per package Sales price: 1.550 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Hedpor Dufbofx Abaep Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2009, Manufacturer: H&G Model: HG/SV 11 Weight: 1800 kg Engine power: 11 kW Hodpfx Aox Hyfysbasp

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Hodpfxewfq T Se Abaop Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container.

Condition: new, functionality: fully functional, power: 300 kW (407.89 HP), overall weight: 65,000 kg, tire size: 6*2, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 3 axles, emission class: euro3, Year of construction: 2026, machine/vehicle number: V9638J96, Equipment: all wheel drive, hydraulics, onboard computer, Sand and Gravel Production Plant | MINGYUAN Heavy Industrial Equipment A sand and gravel production plant is an integrated system designed for producing high-quality construction aggregates, including sand, gravel, crushed stone, and artificial sand. MINGYUAN provides complete aggregate crushing and screening solutions for quarries, mining, construction, and infrastructure projects, ensuring efficient material processing and consistent output. General Introduction The MINGYUAN sand and gravel production line combines advanced crushing, screening, washing, and conveying equipment to process raw materials such as limestone, granite, basalt, river stone, and quartz into various sizes of construction sand and gravel aggregates. The plant typically includes jaw crushers, impact crushers, cone crushers, vibrating screens, sand washers, belt conveyors, and dust collectors, forming a complete and automated production system. It is widely used in road construction, concrete batching plants, building materials, and hydropower projects. Capacity range: 30–1000 tons per hour (customizable) Feed size: ≤800 mm depending on crusher type Output size: 0–5 mm (sand), 5–10 mm, 10–20 mm, 20–40 mm (gravel) Main equipment: Jaw crusher (PE/PEX series), cone crusher, impact crusher, VSI sand maker, vibrating feeder, vibrating screen, sand washing machine, belt conveyor, and control system Power configuration: Electric or diesel-driven options available Automation: PLC control with real-time monitoring and adjustable output ratio MINGYUAN Heavy Industrial Equipment Co., Ltd. provides complete sand and gravel production solutions with reliable performance, competitive price, and professional after-sales service for global customers in the mining, construction, and cement industries. Hedpfx Abeq Nia Ieasp 2. Crushing and Screening: - The extracted raw materials often need to go through crushing and screening processes to reduce their size and separate them into different grades. - Crushers break down large rocks into smaller pieces, and screens sort the particles based on size. 3. Washing: - Washing is a common process to remove impurities such as clay, silt, and dust from the raw materials. This is particularly important for sand and gravel used in construction. 4. Grading and Sorting: - After washing, the materials may go through grading and sorting processes to separate them into different sizes and qualities. 5. Storage and Stockpiling: - Processed materials are often stored in stockpiles for further use. Adequate storage facilities are necessary to manage different grades of materials. 6. Conveying and Transportation: - Conveyor systems are used to transport materials between different stages of the production process. Transportation methods, such as trucks or conveyor belts, are used to move the final products to distribution points. Keywords Sand production line, gravel production plant, aggregate crushing plant, stone crusher, sand making machine, sand washer, vibrating screen, jaw crusher, cone crusher, impact crusher, VSI crusher, quarry equipment, mining machinery, construction aggregates, artificial sand, crushed stone, river gravel, limestone crusher, basalt crusher, granite crusher, sand washing plant, screening plant, conveyor system, MINGYUAN sand plant, aggregate processing equipment, stone crushing line, sand and gravel washing system, high-efficiency crusher, environmental sand plant, aggregate production line manufacturer.

Condition: new, functionality: fully functional, power: 210 kW (285.52 HP), fuel type: electric, color: silver, overall weight: 27,000 kg, empty load weight: 27,000 kg, operation weight: 36,000 kg, maximum load weight: 50,000 kg, tire size: 6*2, tire condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, machine/vehicle number: MYM-J57C90, Equipment: hydraulics, low noise, rubber tracks, Mobile Crusher: Smart C&D Waste Recycling Solution Turn Demolition Debris into Profit Construction and demolition waste accounts for 30-40% of global waste. Our mobile crushing solution processes C&D waste on-site, transforming costly debris into valuable recycled aggregates. Technical Specifications 900×1060 Mobile Jaw Crusher Crusher Unit: Jaw opening: 900mm × 1060mm Max feed size: 750mm Output size: 75-200mm (adjustable) Capacity: 80-180 TPH Power: 90-110 kW Vibrating Screen: 2-deck or 3-deck configuration Screen area: 3.6-4.8 m² Motor power: 15 kW Produces 3-4 aggregate sizes simultaneously Feeder: Belt width: 1000mm Variable speed: 0-25 m/min Power: 7.5 kW Hopper capacity: 5-8 m³ Overall: Dimensions: 12-14m (L) × 2.8-3.2m (W) × 3.8-4.2m (H) Weight: 38-45 tons Total power: 120-150 kW Fuel consumption: 25-35 L/hour (diesel option) What We Process ✓ Concrete (plain & reinforced) ✓ Asphalt pavement ✓ Bricks and masonry ✓ Tiles and ceramics ✓ Mixed demolition debris ✓ Road construction waste Complete Recycling Process 1. Feeding Large hopper (5-8 m³) receives mixed C&D waste up to 750mm 2. Primary Crushing 900×1060 jaw crusher reduces material to 75-200mm with 4-6:1 reduction ratio 3. Magnetic Separation Automatic removal of steel rebar (>95% recovery rate) 4. Screening Multi-deck screen produces multiple grades: 0-5mm (sand) 5-10mm 10-20mm 20-40mm 5. Dust Control Integrated water spray system (8-12 nozzles) achieves >90% dust suppression Key Features Mobility: Track-mounted: Self-propelled, 0.8-1.2 km/h Hjdpfx Abeq Nf Tvjaop Wheel-mounted: Highway transportable Setup time: 30-60 minutes 360° working radius Automation: PLC control system Remote operation (50m range) Real-time monitoring Automatic overload protection Performance: Concrete: 120-150 TPH Asphalt: 100-130 TPH Mixed waste: 80-120 TPH Screening efficiency: >95% Output Products Recycled Aggregates: 0-5mm: Concrete, mortar (15-20% output) 5-10mm: Asphalt mix, drainage (20-25%) 10-20mm: Concrete, road base (25-30%) 20-40mm: Sub-base, backfill (25-30%) Applications Building demolition Highway reconstruction Bridge dismantling Airport runway recycling Disaster debris management Urban renewal projects Service Package Included: Factory testing Installation supervision Operator training (3-5 days) 12-month warranty Lifetime technical support Spare parts availability Get Started Transform C&D waste from cost to profit. Our 900×1060 mobile crusher delivers proven performance, exceptional ROI, and environmental sustainability. Contact us for: Detailed specifications Custom configurations Site assessment Equipment demonstration Competitive quotation Make waste work for you. Choose proven mobile crushing technology for sustainable C&D recycling.

Condition: new, Year of construction: 2026, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. Hjdpfxoq N Ud Ie Abajp 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Condition: used, Year of construction: 2004, Manufacturer: Gerteis Model: GMP-Polygran Macro Pactor 250/100/3 Year: 2004 Type: roller compactor, granulation unit for the pharmaceutical industry. Hedpfx Asx R Ar Rjbaep Feeding screw: 0.1–180 rpm Compaction screw: 1–460 rpm Compaction zone with pressure rollers: 1–30 rpm Granulation zone with star rotor and screen: 0–180 rpm Force: 1 – 20 KN/cm Gap width: 1.0 – 6.0 mm Pressure roller speed: 1 – 30 rpm Roller diameter: 250 mm Roller width: 100 mm Capacity: 60 – 400 Kg/H (normal value: 200 Kg/h) Equipment dismantled and stored. Full electrical and technical file + program backup available. Electrical, control, and safety cabinets are not available. These items can be quoted separately.

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Hjdpfxoy S Rqws Abaep Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Hjdpfx Aboy R Nnfeajp Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, Talbot T150 warehouse wood waste heater will heat a warehouse upto 5000 square feet, excellant condition serviced with Talbots qualified engineers Hedpezc Hkyofx Abaop

Condition: used, Year of construction: 2013, operating hours: 3120 h, with loading fork Hjdpfx Ajy Rvm Ijbaop

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Hsdezdn H Rspfx Abajp Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), year of last overhaul: 2025, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Hedpozdny Rsfx Abajp Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2025, volume flow: 410 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Hjdpfxezdnxgj Abaop Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2026, condition: new, The BTS-Plastic Foil Compactor is the solution to keep large bulky packaging film under control. With its space-saving footprint and secure stand you can easily reduce all foil waste to a minimum of volume. The retaining ring in the plastic foil compactor prevents annoying expansion so that the foils stay where they belong. The filled bags can be baled by using a waste baler or disposed of in a recycling bin. By collecting and compacting this valuable and recyclable material you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Foil Compactor size: 1000 H x 450 W x 420 D mm Foil Compactor weight: 5.5 kg Foil Compactor colour: RAL 9006 silver Foil Compactor Bag volume: 240 Ltr. Foil Compactor Bag weight capacity: up to 15 kg Easy collecting the packaging films Clean and safe working environment Retaining ring prevents the annoying material expansion of the foils Optimum utilization of bags Reduces frequency of waste collection A quality product “Made in Germany” Suitable for collecting and compacting Hjdpfx Asdzvhwsbaop Bulky packaging films and foils Foam foils Optional extras BTS-Foil Bags 240 Ltr. Plastic Foil Compactor colour RAL (minimum order 40 units) BTS-Waste Baler for plastic film and foils Plastic Film Compactor, Foil Compactor, Plastic Film Collector, Foil Collector, Sack Holder

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. Hjdpfxjzbxwie Abaop The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: new, Year of construction: 2026, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hjdsd Hkqhopfx Abaep Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: as good as new (ex-display), The scope of delivery includes: 1x waste container, grade II Manufacturer: Weber Depth, lid closed: 755 mm Depth, lid open: 770 mm Height, lid closed: 1,320 mm Overall width: 1,350 mm Hedpfx Abeku Aw Nsasp Capacity: 360 kg Volume: 770 liters Additional data / information: Material color, container: black Material color, lid: yellow Usable width: approx. 1,085 mm Usable depth: approx. 640 mm Usable height: approx. 1,000 mm Material: Polyethylene (PE) Tires: 4 tires (2 with brakes) Unladen weight: 68 kg Note: Usable width and usable depth taper towards the bottom. General information about the item: This item is offered for pick-up only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: ready for operation (used), Year of construction: 2015, Make: HSM Model: V-press 860 plus Year of manufacture: 2015 Press force: 418 kN Voltage: 400 Max. bale weight: 480 kg (depending on the material) Bale dimensions: 120 x 120 x 78 cm Machine weight: 2083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Feed opening dimensions: 120 cm x 65 cm Video of the machine in operation available upon request. Hedozcrhkepfx Abaep Fast delivery possible.