Used Verschiedene Pallet Guide for sale (11,159)

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Djdpfx Aasz Iqp Tj Ijwc Turntable / base frame / Ø 2,400 mm Max. pallet dimensions: 1,650 x 1,650 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: used, Year of construction: 2018, operating hours: 1,410 h, lifting height: 3,300 mm, free lift: 1,220 mm, fuel type: electric, mast type: triplex, fork length: 1,150 mm, total height: 1,740 mm, color: other, GVW: 1.782 kg Lifting capacity: 1.200 kg Dwsdpfez Nh Nbjx Aa Ioc NEW BATTERY CELLS 24V 3PzB 300Ah, FUNCTIONS LIKE NEW! 220V high-frequency charger, SIDESHIFT, Fork length 1150 mm, Power steering, Space between forks 670 mm,

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_07, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program Dwodoz Ipr Hjpfx Aa Ioc F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS02, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. Dwjdpfez Irx Nox Aa Ijc ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: good (used), Year of construction: 2018, operating hours: 1,619 h, load capacity: 1,600 kg, fuel type: electric, empty load weight: 472 kg, mileage: 1,619 km, Well-functioning electric pallet truck Linde T16 from 2018; Capacity of 1,600 kg; 1,619 hours on the counter; Equipped with battery, external charger, and automatic filling system Dedpfx Ajw Tk R Sja Iswc

Condition: used, Year of construction: 2019, operating hours: 1,201 h, lifting height: 3,950 mm, free lift: 1,470 mm, fuel type: electric, mast type: triplex, fork length: 1,150 mm, total height: 1,960 mm, color: other, GVW: 1.812 kg Dwedoz Nh Nhepfx Aa Ijc Lifting capacity: 1.200 kg NEW BATTERY CELLS 24V 3PzB 300Ah, FUNCTIONS LIKE NEW! 220V high-frequency charger, SIDESHIFT, Fork length 1150 mm, Power steering, Space between forks 670 mm,

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS03, LYBRA Easy OPRS / 6 Programs With automatic cord formation to reinforce the winding in various steps on the pallet. The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) Dwsdpez Ir Hasfx Aa Ijc ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Lybra02, LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change Djdpfx Aoz Iprtja Iowc ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Optionally available with a manual line formation. Other systems available immediately from the Ludwigsburg warehouse.

Condition: good (used), Year of construction: 2016, operating hours: 4,912 h, load capacity: 2,000 kg, lifting height: 800 mm, fuel type: electric, mast type: simplex, empty load weight: 800 kg, mileage: 4,912 km, MULTIPLE UNITS IN STOCK Electric pallet truck with lifting function Brand: Still (Germany) Year of manufacture: 2016 Dedpey R Af Refx Aa Iswc 4,912 operating hours Capacity: 2,000 kg as pallet truck, 800 kg as stacker Lift height: 800 mm INITIAL LIFT – ideal for uneven floors. DUO function Battery equipped with external charger and automatic filling system

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23EVA01, Stretch wrapper EVA TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program Dsdpfxoz Ip S Hj Aa Iowc F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Options: Turntable 1650mm ramp mounting frame Light scanner for black products Other systems available from the Ludwigsburg warehouse.

Condition: good (used), Technical data for the pallet racking system: Racking system: Jungheinrich Type: Esmena Technical data for the installation: Number of racking rows: 1 Length per racking row: 53,433 mm Number of bays per racking row: 5 Number of levels including the base level: 2 Technical data for the capacity: Pallet spaces per bay: 19 Number of pallet spaces per row: 228 Total number of pallet spaces: 288 Based on: Load unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: n.d. Weight per pallet (max.): approx. 800 kg Included in the scope of delivery: 20x Pallet racking uprights, used Material color: blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System hole spacing: 50 / 50 mm Including cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) Height: 6,000 mm Depth: 1,100 mm 114x Pallet racking beam, used Material color: yellow Box profile: 116 x 40 mm Beam type: GNA 116x40 SEG5 Hook: 5 hooks Clear span: 2,707 mm Max. load per beam pair: 2,400 kg, with evenly distributed load. 228x Locking pin, used Dodpez Ng E Ujfx Aa Iswc Material color: Sendzimir galvanized For securing the longitudinal beams to prevent unintentional lifting 80x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 20x Shimming plate, used Material: Fully galvanized For leveling the racking uprights that are installed on uneven ground 1x Load plate with information on bay and frame loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pick-up only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: excellent (used), Year of construction: 2021, Semi-Automatic and Fully Automatic Pallet Wrapping Machine Manufacturer: Cousins Model: LPSWA-CE ("The Switch Semi2Auto") Operation: Semi-automatic & fully automatic Year of Manufacture: 2021/2022 Features and Specifications of the LP-SWA Series Production Speed: Up to 35 loads per hour. Load Capacity: Maximum dynamic load weight: 4,500 lbs – 10,000 lbs static Maximum load size to safely pass through the tower: 67" x 67" (96" load diagonal) x 80" H Maximum load size to remain within the turntable: 46" W x 46" L (65" load diagonal) x 80" H Low-profile turntable: 65-inch diameter, laser-cut steel plate with all-around deck protection. Maintenance-free 54-roller bearing support system. Turntable height 2.813 inches from the ground. ANSI No. 50 direct chain drive with chain tensioner. Rotational speed between 3 and 12 RPM with smooth start acceleration. 1/2 HP AC motor with variable speed. End-of-cycle deceleration and positive stop alignment. Robust all-around deck for turntable protection, 3-sided loading, and pit mounting. Forklift openings at the front and rear for easy movement. Accu-Count precise turntable positioning system for additional film savings! Film carriage lift: 1/2 HP DC motor with variable speed ANSI No. 40, direct chain drive with shock absorber and fall protection Automation Features: Fully electric – no pneumatics required. Patent-pending A-arm film cutting and holding device starts and ends the wrapping process at the top of the load. Cousins Smart Engineering has developed an advanced cutting and holding device with the A-arm. It provides significant productivity increases and safety benefits. This technology is only available on Cousins machines. This unique method of attaching and cutting the stretch film offers the following advantages: • Selectable top wrap function • Stabilizes the load early in the wrapping cycle • Places the film end at the top of the load instead of at the bottom • No film clamp on the turntable that can be damaged by dirt or operator error – also, no slip rings are required to power the turntable, reducing maintenance. • Load placement on the turntable is not critical. • No air connections or noisy compressors • New automatic safety feature for load detection during the first revolution detects uneven or partially stacked top layers and automatically adjusts the A-arm height to avoid obstructions. • A-arm fall protection Control Functions: Electronic control with LED interface Wireless start/stop remote control with one transmitter (additional transmitters available) On/Off/Reset switch and operating indicator Automatic wrapping cycle start/pause with a single button Cycle pause for applying top sheets Reinforce wrapping control for the center of the wrap Emergency stop button Turntable jog button Buttons for lowering and raising the film carriage Control of film tension (force-to-load) Separate speed controls for raising and lowering the film carriage Variable speed control of the turntable Three-beam automatic load height sensor for dark or shiny loads Separate control for 1 to 12 revolutions of the upper and lower wrap Dwodpfx Aswb A N Rja Isc Selectable parameters for reduced film tension for overwrap.

Condition: good (used), Year of construction: 2016, operating hours: 552 h, load capacity: 2,000 kg, lifting height: 800 mm, fuel type: electric, empty load weight: 700 kg, mileage: 552 km, SEVERAL UNITS IN STOCK Dedpfx Asz Nwk Uoa Iowc Electric pallet truck with lifting function, brand Still (Germany), year of manufacture 2016, 552 operating hours. Capacity: 2,000 kg as a pallet truck, 800 kg as a stacker. Lifting height: 800 mm. INITIAL LIFT, ideal for uneven floors. DUO function. Battery from 2016, equipped with an external charger and an automatic filling system.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS01, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. By combining the OPRS carriage, ARYA system, and cable system, it ensures precise film guidance, automated wrapping cycle management, and improved load securing at critical pallet points. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) Djdpfxez Irr As Aa Iswc - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; FILM APPLICATION SYSTEM Arya: Automatically applies the film to the product. Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Year of construction: 2000, condition: good (used), Semi-automatic pallet wrapping machine, stretch wrapping machine Design with horseshoe-shaped turntable for easy loading with a pallet truck Semi-automatic pallet wrapping machine Manufacturer: Siat Type: HSD 312-S Model A 400 Volts / 50 Hz Year of manufacture: 2000 Pallet wrapping machine Capacity: 1200 kg Turntable: with fork opening Turntable diameter: 1500 mm Adjustable turntable rotation speed Motorized film pre-stretch adjustable to 100% or 200% Turntable height: 75 mm Wrapping programs Program 1: Double wrapping with lifting and lowering of the film carriage Program 2: Double wrapping with lifting – pause for attaching the top cover of the pallet – and lowering of the film carriage Program 3: Simple wrapping with only lifting of the film carriage Program 4: Simple wrapping with lifting of the film carriage and pause for attaching the top cover Intended use Re-wrapping palletized loads with stretch film or netting pallet wrapping machine Maximum pallet dimensions: Dodopygwqopfx Aa Iewc L = 1200 mm W = 800 mm H = 2100 mm kg = 1200 pallet wrapping machine, stretch wrapping machine More items – new and used – can be found in our shop! International shipping costs available upon request!

Year of construction: 2026, condition: as good as new (ex-display), machine/vehicle number: S23Synthesi07, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film Dwsdpfx Aez Iqtfea Ijc F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Condition: good (used), functionality: fully functional, machine/vehicle number: 91584068, Year of construction: 2014, operating hours: 1,178 h, load capacity: 2,500 kg, lifting height: 200 mm, battery capacity: 344 Ah, battery voltage: 24 V, fork length: 2,350 mm, Equipment: UVV, power assisted steering, Jungheinrich EJE 225 Electric Low-Lift Pallet Truck, fully stainless steel Year of manufacture: 2014 Operating hours: 1,178 h Battery year: 05/2021 Battery capacity: 344 Ah at 24 V Load capacity: 2,500 kg Fork length: 2,350 mm Power steering Current new price over €50,000 The truck can also be operated with the footplate folded up. Dwodpjyi Hcpjfx Aa Iec Charger included The equipment works flawlessly and is ready for immediate use. Affordable delivery by a specialist company available. Have a look at our other listings as well. We always have many more high-lift and low-lift pallet trucks and forklifts in stock. Need spare parts for your forklift, high-lift pallet truck, etc.? Just contact us.

Condition: good (used), Vogelsang MP 825 Pallet Racking System Vogelsang pallet racking system (type MP 825) with a total capacity of 96 pallet spaces. It offers 12 pallet spaces per bay (distributed across 4 levels with 3 Euro pallets side-by-side, with a bay width of 2,700 mm). The system consists of 1 base bay and 7 extension bays, resulting in a total length of approximately 22 meters. Thanks to the grid decking, the racking is extremely versatile – also suitable for individual items, picking goods, or damaged pallets. The push-through guards and back panel grates included in the scope of delivery ensure maximum safety. Perfect protection against accidental pushing through or dropping of pallets and loads. Manufacturer: Vogelsang Type: MP 825 Length: 22,000 mm Height: 6,200 mm Depth: 1,200 mm Bay width: 2,700 mm Bays: 8 Levels: 4 incl. ground-level space Crossbeam type: INP 100 Load per beam: 3,000 kg Load per bay: 14,000 kg Scope of delivery: 09 x Support frame 6,200 x 1,200 mm, blue 48 x Pallet racking crossbeam 2,700 mm, red 24 x Push-through guard 2,700 mm 32 x Back panel grate 2,700 x 1,200 mm 48 x Grid decking 1,330 x 1,200 mm Your partner for safe storage logistics: Assembly, disassembly & racking inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are installed correctly and meet all safety standards. As experts in warehouse technology, we offer you everything from a single source: Assembly & Disassembly Whether it's a new installation, a renovation, or a warehouse liquidation – we handle the professional assembly and disassembly of your systems: - Pallet racking (heavy-duty & standard) - Shelving systems for small parts and archives - Storage platforms for optimal use of space Racking inspection & inspection according to DIN EN 15635 Safety is a legal obligation. We carry out the annual expert inspection (in accordance with DGUV rule 108-007): - Inspection for deformations and damage. - Inspection of safety pins and load signs. - Creation of a legally sound test report including a test label. "We offer you a suitable financing option for your project from a single source." Dedozrlp Sspfx Aa Iswc You can find more articles – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2015, operating hours: 1,046 h, lifting height: 4,800 mm, free lift: 1,680 mm, fuel type: electric, mast type: triplex, fork length: 1,150 mm, total height: 2,080 mm, color: other, GVW: 1.428 kg Lifting capacity: 1.400 kg Djdpoz Imtzefx Aa Iswc NEW BATTERY CELLS 24V 3PzS 375Ah with filling system, 220V high-frequency charger, Power steering, INITIAL LIFT, FREE LIF, Fork size 1150 x 570 mm, Tandem fork wheels, LOW HOURS!

Condition: excellent (used), Logopak 920 II PF Pallet Labeling System Manufacturer: Logopak Dedow U Tc Tjpfx Aa Iowc Pallet Labeling System Model: 920 II PF Your advantages at a glance: Top speed (up to 240 pallets/hour) Reduced roller changes Maximum flexibility Robust design (protective housing) Intuitive operation via touchscreen Print engine quick-change system Thermo-direct or thermo-transfer printing process for labels up to A3 Internal database, error diagnostics and many other features Functions as a stand-alone solution or integrated into the network VLP 210 II F Label Printing System The Logopak VLP 210 is an intelligent label printing system for barcode product labeling. The robust mechanical design of the 10 mm thick aluminum cast housing with solid steel hinge plates was specifically developed for continuous operation in harsh industrial environments. The printer can be controlled either externally via a serial interface or, thanks to its integrated intelligence, operated as a stand-alone device. SPECIFICATIONS Printing speed: 150 mm/s Core diameter: 50 mm / 76 mm Label roll diameter: 180 mm Font size: 2 mm – 50 mm Printing direction: Rotatable by 90°, 180° and 270° Barcode types: Codabar, Code39, Code128, CodeMatrix EAN13, EAN8, EAN-128, Lata 2/5, Industrial 2/5, Interleave 2/5, ITF-14, Maxicode, PDF417, QR, UPC-A Interface: V.24 or 20 mA, network compatible Memory (RAM): 1 MB battery-buffered CMOS memory, expandable to 8 MB Ambient temperature: 5 °C to 40 °C Dimensions (W x L x H): 700 mm x 500 mm x 400 mm Weight: approx. 50 kg Housing: Painted steel Integrated Intelligence: IP54 control unit with Power Leap II® processing power • User-friendly interface with color LCD display and touchscreen • Multilingual user interface (standard) • Internal article database and error logging (standard) • Remote maintenance for software updates (optional) • 10 standard fonts, 4 scalable • Dual 64-bit RISC processors, 150 MHz clock • RS 422 and 20 mA, Ethernet connection also available (10/100 Mbps) • Industrial fieldbus for I/O control (CAN bus) with flexible programming using a higher-level PLC language • Up to 200 digital I/Os for process control without loss of efficiency More items - new and used - can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), This used Jungheinrich Esmena pallet racking system is a compact, high-performance heavy-duty rack designed for demanding industrial storage applications. Its modular high-bay construction makes it ideally suited for logistics centers, industrial operations, large warehouses, and forwarding companies. With a shelf load capacity of up to 1,500 kg per level and a bay load of up to 6,000 kg, this immediately available racking system offers an efficient storage solution for Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 825 cm - Depth: approx. 105 cm - Length: approx. 5,040 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam color: painted yellow - Uprights: approx. 825 x 105 cm, pre-assembled - Upright color: painted blue - Levels: floor + 4 - Pallet spaces: 270 including floor locations - Version: Used Jungheinrich Esmena SCOPE OF DELIVERY: - 19 x uprights (approx. 825 x 105 cm), pre-assembled - 144 x beams (approx. 270 cm) - 176 x safety pins Price: 5,730.00 € net 6,818.70 € gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery in Germany via our partner freight forwarder – shipping costs depend on the postal code - Professional installation and dismantling by trained teams available as an option - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible Dedpfjz Ip I Ijx Aa Ijwc PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding offer tailored to your specific requirements. Whether new installations, conversions, or expansions – we offer expert advice for your racking configuration. SHOWROOM: You are welcome to visit our showroom! Experience our pallet racks, storage shelves and other solutions in person. Many systems are on display and can be viewed directly. Our expert advisors are happy to assist you with any questions or to provide tailored advice – we look forward to your visit! Haven't found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us via message or phone. Our phone number is available on our company page. ☎️ We are available by phone Monday through Friday from 8:00 am to 4:00 pm. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: used, Year of construction: 2006, Lot of seven sturdy, used rack pallets, stackable. Djdpfxsz Dw Hks Aa Iowc Dimensions approximately 320 x 120 x 120 cm (L x W x H), individual weight approximately 125 kg. Fitted with 12 mm vehicle construction board; the racks can be stored on the pallet, see photos. Payload 1.3 tons, stacking load 3.9 tons, year of manufacture 2006. Transport dimensions approximately 320 x 120 x 200 cm (L x W x H). Weight approximately 900 kg. Sold only as a complete package; the price is for all 7 pallets together.

Condition: ready for operation (used), This pre-owned Jungheinrich Esmena pallet racking system is a compact, high-capacity heavy-duty rack designed for industrial storage requirements. The modular high-bay racking is ideally suited for logistics operations, industrial facilities, large warehouses, and freight forwarding companies. With a shelf load capacity of up to 1,500 kg per level and a bay load of up to 3,000 kg, this immediately available pallet rack system provides an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 400 cm - Depth: approx. 105 cm - Length: approx. 5,040 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam color: yellow, painted - Uprights: approx. 400 x 105 cm, pre-assembled - Upright color: blue, painted - Levels: floor + 2 - Pallet positions: 162 incl. floor positions - Version: Used Jungheinrich Esmena DELIVERY SCOPE: - 019 x uprights (approx. 400 x 105 cm), pre-assembled - 072 x beams (approx. 270 cm) - 144 x locking pins Price: €3,530.00 net €4,200.70 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany via our partner carrier – freight costs depend on your postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections according to DIN EN 15635 by certified inspectors - We can also inspect existing heavy-duty racks from other manufacturers PLANNING & CONSULTING: Our planning department will gladly prepare a non-binding offer tailored to your requirements. Whether it's a new installation, modification, or expansion – we provide professional advice for your racking configuration. Dwjdpfx Aoz Iw E Ija Ioc SHOWROOM: Feel free to visit us in our showroom! On-site, you can get a comprehensive view of our pallet racking, storage racks, and other solutions. Many systems are assembled and available for direct inspection. Our experts are happy to assist you with questions and personalized advice – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers & product variations! INTERESTED OR HAVE QUESTIONS? Contact us easily via message or phone call. You will find our telephone number on our company page. ☎️ You can reach us by phone Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: excellent (used), Year of construction: 2006, lifting height: 210 mm, free lift: 210 mm, fuel type: electric, fork length: 1,150 mm, total height: 140 mm, color: other, GVW: 160 kg Dwsdpfx Ajz E N R Dja Ijc Lifting capacity: 5.000 kg 5000 kg hand pallet truck! original paint, steel wheels

Condition: excellent (used), Year of construction: 2017, operating hours: 3,277 h, lifting height: 4,800 mm, free lift: 1,480 mm, fuel type: electric, mast type: triplex, fork length: 1,150 mm, total height: 2,080 mm, color: other, GVW: 1.336 kg Lifting capacity: 1.400 kg Dodpfoz Imvcjx Aa Ijwc FUNCTIONS LIKE NEW! NEW BATTERY CELLS 24V 3PzS 315Ah with filling system, 220V high-frequency charger, INITIAL LIFT, FREE LIF, Fork size 1150 x 570 mm, Tandem fork wheels,