Used Vei Pit Furnace for sale (1,133)

Condition: ready for operation (used), Year of construction: 2005, The system consists of two bell furnaces, maximum temperature: 1100°C, annealing chamber: 2x 1000mm, electrical connection: delta, current rating: 433A, connected load: 300kW, equipment: power control, temperature control, process monitoring, safety controller, emergency stop system, motorized drive for bell movement, air conditioning unit, electrical control cabinet, and control system. Inspection on site is possible. Dcjdpfxozhw Sde Aa Hol

Year of construction: 2023, condition: ready for operation (used), A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available. Dodpfjtxb Apsx Aa Hocl

Year of construction: 1997, condition: ready for operation (used), A complete Efco furnace system for the production of tempered safety glass is available. Heating capacity: 814.5kW, max. glass pane dimensions X/Y: 2400mm/4200mm, max. temperature: 750°C, total system length: approx. 25m. Components: loading section, furnace, cooling section, unloading section. Documentation available. An on-site inspection is possible. Djdpfxezdum Ro Aa Hocl

Condition: ready for operation (used), A Rohde chamber kiln is available. Volume: 600l, max. temperature: 1000°C, internal dimensions X/Y/Z: 710mm/870mm/920mm, power: 40kW, insulation layers: 2, heating directions: 4, heating element: grooved refractory brick. Machine dimensions X/Y/Z: approx. 1100mm/1500mm/2300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible. Djdpfx Aeyvix Isa Hocl

Year of construction: 1999, condition: ready for operation (used), Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Dcsdpjw Emyzefx Aa Hsl

Year of construction: 2005, condition: ready for operation (used), Usable space: approx. 4m³, max. temperature: 400°C. The furnace is located in the outdoor storage area. Documentation available. An on site inspection is possible. Dcsdpfx Aeygw S Aea Hsl

Year of construction: 1986, condition: ready for operation (used), A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible. Dodpfxevxvgrs Aa Hscl

Year of construction: 1992, condition: ready for operation (used), Gross combustion chamber: 800l, usable combustion chamber: 500l, combustion chamber dimensions X/Y/Z: 820mm/600mm/1015mm, connected load: 100kW, max. operating temperature: 1400°C, machine dimensions X/Y/Z: approx. 1450mm/1150mm/2100mm, weight: approx. 1500kg. Including fresh air blower and control cabinet with controller Jumo Imago 500. On site inspection is possible. Dcodpfx Ajyfv N Roa Hjl

Condition: ready for operation (used), A retort furnace PFS Anlagenbau UG for gas nitriding, nitrocarburizing, and tempering is available. Load weight range: 750kg-6000kg, max. operating temperature: 750°C, treatment chamber dimensions X/Y/Z: 1800mm/900mm/900mm, number of burners: 4, burner type: recuperative, burner output: 4×80kW, loading height: 1200mm, max. evacuation temperature: 350°C, retort material: 1.4841, circulator air volume flow: 10000m³/h, nitriding system manufacturer: Process-Electronic, vacuum pump capacity: 240m³/h, total pressure: below 0.7mbar, max. operating pressure: 1.45bar. Documentation available. An on-site inspection is possible. Dodsy N Uxgspfx Aa Hecl

Year of construction: 2018, condition: ready for operation (used), A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available. Dcjdpfotxb Avjx Aa Hel

Year of construction: 2015, condition: ready for operation (used), There are 2 vacuum retort furnaces available, 1x vertical & 1x horizontal. Vertical: Xerion XRetort, year of construction: 2015, U: 400V, P: 48kW, Tmax: 700°C. Horizontal: Year of construction: 2008, U: 400V, P: 18kW, Tmax. 700°C. On-site inspection is possible. Dcodetndwuspfx Aa Hel

Year of construction: 2001, condition: ready for operation (used), A horizontal glass tempering furnace is offered. Max. temperature: 750°C, heating zones: 10, control system: PLC. Equipped with roller conveyor infeed and outfeed with ceramic rollers, high-pressure cooling blower, control cabinets, hydraulic power unit. Inspection possible by appointment. Dodpfszgwyfex Aa Hecl

Condition: excellent (used), max. temperature 1200 Grad size of opening 220 x 120 mm depth of chamber 400 mm dimensions of the machine ca. 1,4 x 1,2 x 1,6 m Djdpjxcbldefx Aa Hecl

Condition: ready for operation (used), Year of construction: 1977, Usable furnace width: 600mm, usable furnace height: 310mm, clear passage height: 350mm, furnace zone length: 3500mm, number of heating zones: 3, radiant tube control: On/Off, radiant tube monitoring: via UV cell, max. temperature: 1050°C, operating temperature: approx. 800-1000°C, material processed: transformer and slit-strip cores, net/gross throughput: 750/860kg/h, max. grate load: 250kg, permissible grate weight: 50kg, cycle time per grate: approx. 20min, heating, equalizing, holding: approx. 850°C, approx. 120min, cooling: from approx. 850°C to below approx. 200°C in approx. 180min, number of grates: inlet lock: 1, annealing furnace: 6, furnace neck: 1, cooling section: 9, outlet lock: 0, grate return transport (buffer): 18, grate width: 600mm, grate length: 600mm, grate height: 60mm, overall grate height: 210mm, frame height: 150mm, weight per grate: approx. 50kg, annealing furnace length: 5000mm, cooling zone length: 5700mm, overall furnace system length: 15,100mm, loading height of the system: 700mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible. Dedpoztrbkofx Aa Hjcl

Condition: ready for operation (used), Year of construction: 1975, A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperature: 1250°C, dew point or cooling water temperature of direct cooler: 23.5-25.5°C, total bluing time: 75min, cycles in the bluing zone: 3, bluing zone temperature: 550°C, holding time: 50min, evaporator temperature: 120°C, total connected load: 111kW, length: 14,200mm, width: 1650mm, height: 3000mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible. Djdpfx Aoztrbwsa Hscl

Condition: used, Year of construction: 1975, functionality: fully functional, overall weight: 10,000 kg, total length: 2,745 mm, total width: 2,360 mm, total height: 2,700 mm, type of cooling: air, BBC BROWN BOVERI (nowadays ABB) – Pouromat, pouring furnace, type XCQ 44 TECHNICAL DATA - crucible capacity: 4.4t - tilting furnace - inductor 120kW - inductor voltage 380/425V - 2 operating modes: preheating, heating mode 1 - pouring rate: 1-20kg/s - dimensions:  height: approx. 2700mm  length: 2745mm  width: 2360mm - weight: approx. 10,000kg - furnace equipped with a bottom-pour stopper - average inductor lifespan: 12 weeks - average bottom-pour stopper lifespan: 1 week - average crucible lifespan: 4 – 6 months - furnace equipped with an additional device used to modify the liquid metal with ferrosilicon CONSTRUCTION The pouring furnace consists of four basic groups: - First group – longitudinal travel (orbit motor) - Second group – transverse travel, including the bottom-pour stopper - Third group – inductor with a power of 120 kW, voltage 380 V 50Hz, whose main task is to heat the liquid metal. The inductor is constantly air-cooled during operation. - Fourth group – switchboard with a built-in transformer, contactors and control station. POURING PROCESS The pouring process proceeds as follows: DISAMATIC 2032 A displays the molds on the conveyor in the correct position. The correct position means that the open pouring basin in the mold is located in a position compatible with the bottom-pour stopper at the bottom of the crucible. If the desired position is achieved, the operator manually (by means of a lever) lifts the bottom-pour stopper in order to fill the mold, until the liquid metal is visible in the outflow. The speed of pouring the molds can be adjusted depending on the diameter of the ceramic block and the orientation of the bottom-pour stopper towards the ceramic block. CERAMICS The manufacturer, BBC, recommends using a two-layer firebrick lining, where one layer is permanent, but the second is expendable. The permanent lining consists of an insulating layer, which is a lightweight burned stone, and a sillimanite layer. The expendable layer consists of a corundum material, meaning a concrete with a high clay content (94%). Both parts are connected together by means of a special cement. The crucible inductor is located in a lining of Al₂O₃ or MgO and SiO₂, depending on the requirements. The material used to seal the bottom-pour stopper has the quality of chamotte with different clay content. The inductor is assembled to the pouring furnace by means of screws and a sealing compound with the proper plasticity and heat resistance. The entire device consists of three stopper rod sleeves, a bot, and a ceramic block, where the bot and stopper rod sleeves are connected together. The bottom-pour stopper is seated on a threaded bar. The bottom-pour stopper is continuously air-cooled. Recommended air pressure: 6 atm. CERAMICS LIFESPAN 1. crucible: approx. 4 – 6 months 2. inductor: approx. 12 weeks The lifespan of the ceramics depends on many factors. The most important are: production frequency, pouring temperature, cleanliness of the liquid metal, and alloy type. The lifespan of the upper cover and rotating cover is much longer because these parts have no direct contact with the liquid metal. Dcedszfyu Ajpfx Aa Hel PRICE *44,100 EUR *disassembly of the furnace, transportation costs, and assembly at the customer's location are paid by the Buyer; the price includes additional equipment: - additional (replaceable) inductors (without induction coil): 2 pcs.

Condition: excellent (used), functionality: fully functional, OMIP K7 Automatic Pitting and Destoning Machine – Stainless Steel The OMIP K7 is an industrial pitting and destoning machine designed for the automatic processing of stone fruits, performing cutting and pit separation operations to prepare the product for subsequent processing, preservation, or packaging stages. Manufactured by OMIP, the K7 is designed for continuous operation, individually positioning the product before performing the mechanical pitting and pit extraction operation. Its configuration allows for the automation of a preparation stage that requires precision and consistency to minimize manual handling. Its construction, primarily in stainless steel, makes it particularly suitable for industrial fruit processing lines. MAIN FEATURES -Manufacturer: OMIP -Model: K7 -Type: Automatic pitting/destoning machine -Application: Stone fruits -Function: Fruit cutting and pit separation -Automatic and continuous processing -Product feeding system -Individual fruit positioning -Multiple processing stations -Mechanical cutting system -Pit extraction/separation -Continuous discharge of processed product -Construction primarily in stainless steel -Motorized drives -Safety guards -Hygienic design for the food industry -Integrable into complete processing lines PROCESS The fruit is fed into the feeding area, where the system distributes and guides it to the different work positions. Djdpfjwnxkwsx Aa Hocl Each piece is positioned in a controlled manner before entering the cutting and destoning mechanism. The machine performs the fruit opening and mechanical pit separation, allowing the product to be prepared for further processing. Depending on the line configuration, it can be integrated with: Fruit washers Sorting systems Selection and inspection tables Peelers Conveyors and elevators Post-washing systems Fillers IQF freezing systems Canning lines Packaging equipment APPLICATIONS Particularly suitable for canning industries, fruit processors, frozen fruit manufacturers, and fruit and vegetable processing plants that need to automate pitting and destoning. This type of equipment can be used for peaches, apricots, and other compatible stone fruits, depending on the size, variety, maturity stage, and installed configuration. The OMIP K7 provides an industrial solution to achieve continuous and regular processing, reducing the need for manual operations during the preparation of stone fruit. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, TECHNICAL DETAILS Quenching tank for stirring oil quenching Dcjdeug U Thjpfx Aa Hol - power : 0.25 [kW] - voltage : 3 x 380 [V]

Condition: good (used), Year of construction: 2000, W&P Matador bakery oven - Model MD 125 - Used - Year of manufacture approx. 2000 - Gas or oil-fired - Surface area 12.5 m² - 5 chambers, 1.2 x 2.0 m each - Hood with fan - Manual control - Collection from warehouse / shipping option available Dcodjzx Sdvopfx Aa Hel - Price upon request

Condition: good (used), Foundry4 Dosing Furnace TD1400DC Aluminium Melting Furnace Melting Furnace 850°C Capacity 1,400 kg Heating power 22 kW 4 units in stock Djdpoxt Habjfx Aa Hocl

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 200 h, power: 11.5 kW (15.64 HP), input voltage: 192 V, input current: 60 A, temperature: 1,350 °C, inner dimension length: 1,500 mm, inner dimension width: 100 mm, inner dimension height: 100 mm, total length: 2,000 mm, total width: 600 mm, total height: 600 mm, overall weight: 150 kg, number of chambers: 1, actuation type: electric, fuel type: electric, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Carbolite Gero Tube Furnace – 1350 °C, Ø 100 mm, Length 1500 mm – Fully Functional For sale is a high-quality tube furnace from Carbolite Gero in excellent technical condition. The furnace has only been operated for approx. 200 hours and was primarily used for sintering copper at around 1000 °C. Thanks to the maximum temperature rating of 1350 °C, the system was never thermally overstressed and therefore remains in well-maintained condition. 🔧 Technical Specifications - Max. temperature: 1350 °C - Tube diameter: 100 mm - Tube length: 1500 mm - Temperature measurement: internal thermocouple → precise process control - Features: water-cooled flanges Dsdjy H E Ndepfx Aa Hscl 🔩 Condition & Notes - Furnace is fully operational - Supplied ceramic tube shows signs of previous use Recommendation: - Replace with new ceramic tube for high-temperature applications - Alternatively, use cost-effective metal tubes for operations below 1100 °C 💡 Benefits - Highly accurate temperature control via internal measurement (i.e., furnace temperature and ramps are regulated by an internal thermocouple, ensuring optimal sample temperature) - Ideal for precise sintering processes, heat treatment, and materials development - Robust industrial design from a reputable manufacturer 📦 Areas of Application - Metallurgy (e.g. copper, steel, ceramics, glass-ceramics, powder metallurgy) - Research & Development - Laboratory and small-scale production applications 🚚 Other - Inspection possible by appointment - Collection only

Year of construction: 2008, condition: ready for operation (used), Loading chamber dimensions: 280x580mm, loading height: 700mm, max. load: 300kg, with protective housing and documentation, machine was functional until the end, complete maintenance would have to be carried out on the machine, inspection is possible. Dcsdpfx Ajqgfbgja Hjl

Condition: ready for operation (used), Max. Working temperature: 1120°, heated length: 1000mm, cooling length: 1850mm, channel height: 40mm, conveyor belt width: 110mm, throughput speed: 100-1000mm/min, splitting gas consumption: 1.5-2.5Nm³/h, touch panel: Siemens SIMATIC HMI, length: 5000mm, width: 650mm, height: 1350mm, with integrated ammonia splitter GSP 25 FA, integrated gassing panel, protective gas from ammonia splitter (on-site ammonia supply) + N2 purge gas as required, MSR system with Siemens PLC and touch HMI, atmosphere monitoring, process documentation, on-site inspection is possible. Dcsdpfx Ajq Ttz Eja Hel

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, number of chambers: 1, actuation type: electric, Equipment: CE marking, documentation/manual, Stock item, immediately available -Tmax 1350°C -Usable space L x W x H (mm) 600 x 500 x 500 -Batch weight 300 kg -External dimensions L x W x H (mm) 4200 x 2500 x 3500 -Space requirement L x W x H (mm) 5000 x 5000 x 4000 -Weight (net) 13000 kg -Total connected load 125 kVA -Connection voltage 400 V -Current fuse rating 250 A -Control system: Stange SE 607 -Documentation Included: -Protective gas buffer tank -Vacuum pump stand -4-flap design for cooling, allowing the flow direction of the gas stream to be adjusted horizontally or vertically. -There is the possibility of connecting a liquid nitrogen supply, allowing the furnace to cool down to -80°C. -Internal insulation made of graphite hard felt, CFC-protected and reinforced. We will build a second identical furnace by the end of the year. You can find the detailed description as a PDF in the advertisement! Dedpfx Ajzr U Anoa Hjcl We offer new and used industrial furnaces. Inspection in our warehouse by appointment! Industrial furnace, vacuum furnace, vacuum furnaces, vacuum hardening furnace, hardening furnaces, sintering furnace, sintering furnaces.

Condition: good (used), Lifting platform, car lifting platform, lifting device, lifting lift, pit jack, axle free jack, truck lifting device, axle jack Dodpoikrpuefx Aa Hjcl -Manufacturer: MWH Märkisches Werk Halver, truck lifting device pit jack -Type: Atlas LT -Load capacity: 2x 5000 kg -Lifting height: 1600 mm -Operating pressure: 60 bar -Accessories: included, see photos -Transport dimensions: 1000/940/H1400 mm -Total weight: 820 kg