Used Tywent 7,5Kw for sale (64)

Year of construction: 1976, condition: used, throughput 2.500 - 4.000 Ltr - self-cleaning - with manual star-delta switch Ppsdpeb Im H Uofx Anzjw and with emergency stop function - flowmeter - engine 7,5kW, 50 Hz, plug 32A - condition: overhauled

Condition: new, Airpress Aps 7,5KW oil compressor NEW COMPLETE. Screw compressor APS 10 Combi Dry X 10 bar 7.5 kW 920 l/min 500 L machine NEW HP / kW: 10 / 7.5 Number of compression stages: 1 Capacity at 10 bar (l/min): 920 Pedpfx Ansq D Dcnszspw Refrigerant: Air Drive: Direct Start-up: Y-∆ Tank capacity (l): 500 Dehumidifier: 230 V / 50 Hz / 1 Ph Length, Width, Height (mm): 1670 x 700 x 1660 Weight (kg): 380.00 Safety features: Safety button Display: Monochrome Sound level dB(A): 63 Air connection: 3/4" net price: 19500 zł gross price: 23985 zł

Condition: good (used), Manufacturer ESTARTA Model 301 MV Condition Used Stock number 4576 Location Badajoz, Spain Dimensions 1520x1020x1260mm Weight 1550 kg Opening between grinding wheels 1,5/50mm Max. grinding wheel width in plunge grinding Pjdpor Ezfpefx Anzopw plunge 125mm Dimensions of the working wheel (od x id x width) 300x125x175mm Øext.min. working wheel working wheel 220mm Max. depth of profile of working profile depth 8mm Dimensions of the driving wheel (od x id x width) 220x125x125mm Øext.min. of driving wheel drive wheel 165mm Max. depth of profile of the driving wheel profile depth 8mm Grinding wheel motor power motor power 7,5Kw Motor power of grinding wheel driving motor power 0.75Kw Tilting angle angle of working working +/- 5º

Condition: new, pressure: 60motor: 11daylight: 450stroke lenght (max.): 400table diamension: 600 x 500 x 80tappet area: 600 x 500 x 90table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.700weight approx.: 4.000oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 150mm. Auxiliary cylinder: 2 pcs. Ø 60 x 40mm. Auxiliary guide: 2 pcs. Ø 40mm. Motor: 7,5kw. - 11hp. ( IE-3 ) Pump: 18cc. - 26Liter / ASC. Speed : flow 110mm./sec. - return 120mm./sec. - Pressure : 11mm - 5./sec. Installation height: 500mm. Stroke length: 400mm. Table top: 600 x 500 x 80mm. - (with T - grooves) Plunger plate: 600 x 500 x 90mm. - (with T - grooves) Podpfommuq Iox Anzopw Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 7 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: new, different types: - Straw Shredder KSTAS 7,5kW - Straw Shredder KSTAS 9kW - Straw Shredder KSTAS 11kW electric outlet 400V 50Hz (3 phases) fuse 32 A capacity 6 m³/h dimensions: length 1 225 mm width 785 mm height 1 400 mm weight 220 kg material steel varnished discharge height 550 mm discharge connection diameter Ø 160 mm suitable for all sorts of straw Podpfxeb Nvtwj Anzspw scope of delivery screen 22 mm perforation

Condition: excellent (used), Year of construction: 2010, I sell the complete aspiration system ELBH 5x Ventilator 7,5kW Total power apprx. 45.000 m3 / hr. Recuperation system for returning the hot air back Ppodpferft Aiex Anzew Full system of dust extraction hoses. pneumatic pads, safety elements included in price. Year 2010 Possible to sell immediately only as a complete set.

Condition: good (used), Year of construction: 2007, I sell the heavy duty fourside moulder GAU-JING 930D-CE. Element max. 300x200mm ! Feeding speed up to 36m/min ! 5,00m long infeed table hard chromed! 9 spindle configuration: Bottom 11kW (15HP) / 6000 rpm Bottom 11kW (15HP) / 6000 rpm Right 7,5kW (10HP) / 6000 rpm Left 7,5kW (10HP) / 6000 rpm Right 7,5kW (10HP) / 6000 rpm Left 7,5kW (10HP) / 6000 rpm Top 11kW (15HP) / 6000 rpm Pedpfx Ajrcb T Tonzopw Top 11kW (15HP) / 6000 rpm Bottom 11kW (15HP) / 6000 rpm Feeding motor 11kW (15HP) Total power 100 KW / 160 A Total weight 10.000kg. Element max. 300x200mm ! Moulding heads and accessories included in price. 3 hydro heads out of that. Electronic programmer for the working width and height adjustment of the pressure zone and top spinde, aka working height. Feeding speed adjustable by inverter. Feeding rollers in table. 13-Zone pneumatic pressure system for feeding wheels. Very good condition. Available immediately. Possible to test. Including fully documentation and CE.

Condition: new, Year of construction: 2014, I sell the Hot Air drying tunnel BURKLE Modell: Easy Dry JET 1300 Filter: TRDUE / 700 m3/hr. Ventilator 7,5kW / 6800m3/hr. / 35 m/s Working width: 1400mm Total length: 6,00m Elektric connection 36,5kW Heating system 12 blowing units Heating medium water up to 80°C Max. Heating power 45 kW Psdpfx Anjr Arrwjzopw Max. Temperature of heated surfaces 120°C Siemens Simatic Touch control panel Year 2014. Machine NEW, not used before ! Available immeditely.

Condition: good (used), Year of construction: 2006, I sell the automatic pneumatic end cutting saw Weinig Grecon Dimter Opticut 200 Elite Year 2006 Podpfx Asxtxi Ienzopw Motor power 7,5kW Input table automatic feeding 4,10m (throughfeed system) Outut table automatic 6 pcs. kickers on right outfeed table Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: good (used), Year of construction: 2012, I sell the automatic pneumatic end cutting saw KuangYung PX60 CFS 200B, year 2012. Ppedpfx Aoppwx Eenzjw Motor power 7,5kW Input table automatic feeding 5,10m (throughfeed system) Outut table 9,20m 5 pcs. kickers on left outfeed table Total length: 15,50m Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Year of construction: 2024, condition: new, A part of our machines is available IMMEDIATELTY. Ppjdpfx Ansium Ipszow Dust collector 7.5 kW DCO-7500-N Overview A dust collector is a part of a ventilation system. It is designed to remove suspended particles. This task is fulfilled with a fan rotor and replaceable filter canisters. Using a dust collector improves air quality, making it easier to keep the connected machine clean, and extending its life. Dust collectors are safe for operators and the environment. Specifications - Input voltage: 400V AC 50hz - Efficiency: 3000-4000 m3 - Nominal power: 7,5kw - Filtration area: 40 m2 - Number of filters: 4 units - Filter size: ⌀325 mm - Filter height: 660 mm - Weight: 400 kg - Height: 1980 mm - Width: 1000 mm - Depth: 1000 mm

Condition: excellent (used), functionality: fully functional, saw blade diameter: 700 mm, saw drive: 7,500 W, operating pressure: 6 bar, disc diameter: 700 mm, Large size carpenter industrial cutting circular saw. Powerful engine: 7,5Kw. 380V. Podpsv Ic Iuofx Anzepw Forward and backward movement is pneumatic. Height adjustment is electric. La diameter: 700mm.

Condition: good (used), I sell the heavy duty fourside moulder SK MACHINERY 907S. Podpjpwdwbjfx Anzepw Element max. 240x150mm ! 7 spindle configuration: Bottom 5,5kW (7,5HP) / 6000 rpm Right 5,5kW (7,5HP) / 6000 rpm Left 5,5kW (7,5HP) / 6000 rpm Right 5,5kW (7,5HP) / 6000 rpm Top 7,5kW (10HP) / 6000 rpm Top 12kW (15HP) / 6000 rpm Bottom 5,5kW (7,5HP) / 6000 rpm Total power 62KW / 102 A Total weight 5000kg. Element max. 240x150mm ! Moulding heads with spiral knives fi.140x260x40mm included in price. Electronic programmer for the working width and height adjustment of the pressure zone and top spinde, aka working height. Feeding speed adjustable by inverter. Zone pneumatic pressure system for feeding wheels. Available immediately Repair required: Bearings on one spindle which is already outside.

Condition: good (used), Year of construction: 2005, I sell the automatic pneumatic end cutting saw Weinig Grecon Dimter Opticut 200 Elite Year 2005 Ppsdextxg Hjpfx Anzjw Motor power 7,5kW Input table automatic feeding 5,10m (throughfeed system) Outut table automatic 6 pcs. kickers on left outfeed table Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.