Used Telemecanique 16-Polig for sale (13,235)

Condition: used, Year of construction: 2017, feed pressure / bar liter capacity / l Nwjdjxy S H Topfx Ac Ael Air consumption / m³/h

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 119, spindle motor power: 5 W, turning length: 160 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 99 rpm, turning diameter: 16 mm, overall weight: 2,300 kg, type of input current: three-phase, bar passage: 16 mm, total width: 1,340 mm, total length: 1,850 mm, total height: 1,685 mm, input voltage: 380 V, number of driven tool stations in tool turret 1: 6, number of driven tool stations in tool turret 2: 6, Equipment: documentation/manual, rotational speed infinitely variable, I am offering my lathe for sale, complete with the accessories shown in the pictures. It includes a bar feeder and a chip conveyor. Nedpfx Aey Udcfoc Aewl The machine is controlled by a Yasnac CNC system. The machine has two turrets, allowing for multi-axis and multi-group control.

Condition: like new (used), Year of construction: 2022, The robot is designed for multi-segment roadways, with a minimum travel distance of 6 meters and a total possible travel distance of 20 meters, at a height of 3 meters, using special columns. Nsdpfxjzzbctj Ac Aewl It is also possible to install the robot on the floor, but this requires minor modifications. Year of manufacture: 2022 Serial number: 1306061 Payload: 16 kg Weight: 296 kg Reach: 2013 mm Control system: KR C4

Condition: like new (used), Year of construction: 2022, Year of manufacture: 2022 Serial number: 1306064 Payload: 16 kg Reach: 2013 mm Axes: 6 Nwedpfezzbd Rjx Ac Ael Controller: KUKA KRC4

Year of construction: 2023, condition: ready for operation (used), A Herzog two-head square braiding machine is available. Number of carriers 1/2: 12/16, tandem carrier configuration: 8, horn gear diameter: 150mm/200mm, speed 1/2: 175rpm/131rpm, bobbin diameter: 55mm, bobbin height: 130mm, bobbin capacity: 265cm³. Including 2x change gears, 2x double gears, 28x bobbins, 28x thread tension springs, 2x take-off discs, 6x wooden drums, 8x carrier tubes, 2x braiding plates and one carrier guard. The machine has only been operated for a few thousand running meters and is therefore in very good, near-new condition. Documentation available. An on-site inspection is possible. Nwsdpfxjzqfx Dj Ac Ajl

Year of construction: 2007, condition: like new (used), 457mm wide stainless steel belt with overlay Ashworth Omni grid Belt 95mm Product gap 155 Tier pitch Nodpfx Acozuzvgs Aswl Main drive - 4Kw 1600 diameter drum Goedhart Freon evaporator full cascading refrigeration pack included in a container More photos and spec upon request

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 240074, input voltage: 400 V, total length: 5,700 mm, total width: 2,000 mm, total height: 1,500 mm, type of input current: three-phase, year of last overhaul: 2025, overall weight: 1,400 kg, input current: 120 A, conveyor belt width: 1,600 mm, 1600 mm belt widthTesoma Lynx electric tunnel dryer, manufactured in 2004, in excellent working condition, without any known issues and ready for production. Large-capacity industrial dryer, suitable for high-volume screen-printing production and capable of easily supporting two automatic screen-printing presses. Equipped with ceramic heating elements and powerful hot-air circulation, making it particularly suitable for water-based inks. Separate controls for the heating zones allow precise operation and help reduce energy consumption. The dryer can also be used for drying and heat-setting textiles. Technical specifications • Manufacturer: TESOMA • Model: LYNX • Year: 2004 • Heating: Electric • Heating zones: 2 • Heating chamber length: 2 × 200 cm • Belt width: 160 cm • Inlet length: 120 cm • Total machine length: approx. 570 cm • Total width: 200 cm Nsdozw Aniopfx Ac Aswl Ready for shipment, can help wiith transport across EU. Please see the photos and video, showing the machine in detail and in operation. Excellent condition - Must go - Make an offer

Condition: like new (used), Year of construction: 2022, Robot installed on a two-segment track, with each segment 6 meters long, allowing a total travel distance of 12 meters, at a height of 3 meters, on special columns. Installation of the track on the floor is also possible, but requires minor modifications. Manufacturing date: 2022 Serial number: 1396062 Weight: 296 kg Nwjdpfxszzbbve Ac Ajl Payload: 16 kg Reach: 2013 mm Control system: KR C4

Condition: used, functionality: fully functional, Year of construction: 1980, control type: NC control, actuation type: hydraulic, working width: 3,100 mm, sheet thickness (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, back gauge adjustment: motor-driven, back gauge: 1,000 mm, input voltage: 380 V, input frequency: 50 Hz, overall weight: 19,000 kg, total length: 4,500 mm, total width: 3,200 mm, total height: 2,900 mm, number of support arms: 2, We are offering a reliable LVD Hydraulic Shear, Model MG-31/16-20, at a very attractive price. Key specifications: • Cutting capacity: Up to 20 mm • Year of manufacture: 1980 • Weight: 19,000 kg Nwsdsxg I T Nspfx Ac Asl • Transport dimensions: 2350 x 4300 mm, height 2900 mm • Location: Slovenia This is a solid, proven machine that’s ready for heavy-duty use.

Condition: good (used), functionality: fully functional, Year of construction: 2008, Used Baykal plate shear Nwedpfjzvqqiex Ac Aol Type MGH 3100 16 Capacity 3100 x 16 mm Adjustable back gauge Adjustable cutting clearance Rear safety guard

Condition: new, Year of construction: 2022, Manufacturer: RBC Robotics GmbH Type: Automation Brose oKMV Year of manufacture: 2022 Machine no.: 20380 Length: approx. 20,000 mm Width: approx. 1,500 mm Height: approx. 3,000 mm Number of robots: 5 Power supply: 3 × 400 V + N + PE / 60 Hz Power: 57 kW Max. fuse: 100 A Control voltage: 24 V DC Mains system: TN-S Max. short circuit current: 10 kA Pneumatic operating pressure: 6 bar Weight: 25 t Equipment: Production part collection and transfer stations KUKA industrial robots: Nodpfozuy Ibjx Ac Aewl Manufacturer: KUKA Series: CYBERTECH-2 Model: KR 16 R2010-2 / SEL Number of robots: 5 Year of production: 2022 Number of axes: 6 Payload: 16 kg Reach: 2013 mm Weight: 296 kg

Condition: used, functionality: unexamined, Year of construction: 1998, load capacity: 5,000 kg, power: 7.8 kW (10.61 HP), STAHL lifting capacity 5000 KG Nsdpfxezvgtyo Ac Aewl

Condition: good (used), functionality: fully functional, machine/vehicle number: WJMBB0A8M04010094, mileage: 24,500 km, overall weight: 7,500 kg, axle configuration: 4x4, color: red, Year of construction: 1995, Sales Description – Iveco Magirus 80.16 4x4 Firefighting Demonstrator Vehicle We are offering for sale our seldom-used IVECO Magirus 80.16 4x4 demonstrator vehicle, which was custom-built in 2013 together with Jacinto (Portugal) for demonstration purposes. The vehicle is based on a robust chassis from 03/1985 with just 24,xxx km mileage. The superstructure, including the fire centrifugal pump, was newly manufactured in 2013. The pump has only 34 operating hours. This fire engine is fully equipped and comes with a complete inventory. In addition, it features a fully automatic light mast and an 8.5 t front winch. Vehicle details: Model: Iveco Magirus 80.16 4x4 Chassis Year: 1985 Superstructure: 2013, Jacinto (Portugal) Mileage: approx. 24,000 km Centrifugal Pump Operating Hours: 34 h Equipment: Front winch (8.5 t), automatic light mast, full loading/inventory Equipment by locker (stowage compartment): Nodpfx Ajx Uy Rlec Aswl Front left locker: Bolt cutter 2x Dräger breathing apparatus Hydraulic rescue spreader Hydraulic rescue cutter Power unit for rescue tools Projector Tarpaulin Fire extinguisher Hose cassette Middle left locker: Fireco high-pressure pump (water/foam) High-pressure lance Various hose management accessories Rear left locker: Connection high-pressure pump to hose reel Various hose management accessories Outlet: 1x water / 1x foam Rear locker: Pump control station Light mast controls 1x suction inlet 1x water supply 1x "emergency exit" water outlet 1x rapid attack hose reel Rear right locker: Supply/transport hoses Pressure hoses "Lifeline" 1x pressure relief valve Outlet: 1x water / 1x foam Middle right locker: Backup generator (for light mast) 5x traffic cones 1x water curtain 1x suction strainer incl. rope 1x first aid kit 1x canister Front right locker: Petrol-driven fan Foam branchpipe Hose bridges Hooligan tool Chainsaw Hose section Various equipment Right underfloor compartment: 5x warning lights Diesel tank Left underfloor compartment: Batteries 1x wedge Pneumatics Remarks: The vehicle has been used exclusively for demonstration purposes. It is technically in excellent condition, but both the chassis and body do not comply with the latest standards for new acquisitions—which is the reason for this sale. Ideal for fire brigades with a limited budget or for export.

Condition: used, functionality: fully functional, spindle mount: MK 5, drilling depth: 315 mm, height adjustment type: hydraulic, rotational speed (max.): 2,000 rpm, rotational speed (min.): 25 rpm, total width: 1,070 mm, total length: 2,500 mm, total height: 2,840 mm, table width: 500 mm, table length: 630 mm, overall weight: 3,500 kg, arm reach: 1,600 mm, For sale: ZJ Z3050×16/1 radial drilling machine. Njdpozhbtrofx Ac Aowl Robust radial drilling machine for drilling, reaming, countersinking, and tapping larger and heavier workpieces. Thanks to the long radial arm, the drill head can be positioned flexibly above the workpiece without the component needing to be constantly moved or re-clamped. This machine is equipped with hydraulic clamping for the arm, column, and drill head. The combination of the heavy-duty construction, the wide working range, and the mechanical 16-speed and feed control makes it suitable for maintenance work, structural work, machine construction, and general metalworking. The machine is being sold due to a restructuring of the production facility. It is offered in used condition, as shown in the photos. Inspection and, if desired, a functional test are possible by appointment in Kuurne, Belgium. The vice, clamping devices, and other accessories visible in the photos are only included if this is expressly agreed upon.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Nwodpeztpw Nefx Ac Ael Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: excellent (used), Inductive sensor, electronic sensor, safety switch, inductive proximity switch, proximity sensor, NAMUR sensor -Manufacturer: Telemecanique, Inductive proximity switch, unused, original packaging -Type: XS518B1PAM12 -Number: 3 sensors available Nedpozlyvmsfx Ac Ajwl -Price: per piece -Box dimensions: 95/40/H65 mm -Weight: 0.1 kg/pc.

Condition: excellent (used), Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor Nedpfx Acezkhzbe Ajwl -Manufacturer: Telemecanique, Schütz Square D Ovp -Type: LC1D65008M5 007302 -Number: 1x contactor available -Cardboard dimensions: 130/90/H135 mm -Weight: 1.4 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 9,119 h, load capacity: 1,600 kg, lifting height: 4,100 mm, free lift: 1,300 mm, fuel type: electric, mast type: triplex, construction height: 1,950 mm, battery voltage: 48 V, fork length: 1,200 mm, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,423 kg, total height: 1,950 mm, total length: 1,850 mm, total width: 1,100 mm, fuel: electricity, Equipment: sideshift, LINDE E 16 C - 02 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 4.100 mm Closed height: 1.950 mm Free lift: 1.300 mm Mast: Triplex (3F410) Fork length: 1.200 mm Fork carriage: FEM 2A Drive: Elektro 48V Battery: 48 V Charger: Dreiphasig 48 V 100 A not tested Tyres: Superelastik SE 18 x 7 - 8 (70%) / 15 x 4,5 - 8 (50%) Service weight: 3.423 kg Length: 1.850 mm Njdpfx Acjz Aqc Ee Aswl Width: 1.100 mm Year of manufacture: 2019 Operating hours: 9.119 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Pulse control ATTACHMENTS Sideshift Internal no.: 1309268 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, operating hours: 15,868 h, load capacity: 1,600 kg, lifting height: 4,630 mm, free lift: 1,420 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: VW, fork length: 1,200 mm, tire condition: 10 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 18 x 7 - 8, overall weight: 3,158 kg, total height: 2,250 mm, total length: 2,300 mm, total width: 1,120 mm, fuel: liquid petroleum gas (LPG), Equipment: cabin, sideshift, STILL RX 70-16 T – LPG forklifts TECHNICAL DATA Nodpfx Asz Aqhnoc Aowl Lifting capacity: 1.600 kg Lifting height: 4.630 mm Closed height: 2.250 mm Free lift: 1.420 mm Mast: Triplex (3F463) Fork length: 1.200 mm Fork carriage: 2A Drive: 4-Zyl. Treibgas Engine: VW Tyres: Superelastik SE 18 x 7 - 8 (10%) / 18 x 7 - 8 (10%) Service weight: 3.158 kg Length: 2.300 mm Width: 1.120 mm Year of manufacture: 2020 Operating hours: 15.868 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin ATTACHMENTS Sideshift, Fork positioner Internal no.: 1202054 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, mileage: 487,792 km, power: 120 kW (163.15 HP), first registration: 11/2012, fuel type: diesel, number of seats: 17, gearing type: automatic, next inspection (TÜV): 12/2025, emission class: euro5, color: white, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle today, subject to final sale, errors, typos, and prior sale: Mercedes Benz Transfer 45 Bus Sprinter 516 CDI (Vehicle No. 451) First registration: November 20, 2012 487,792 km Engine: 2,143 cc 120 kW / 163 hp Euro 5 EEV Permissible total weight: 5,000 kg Unladen weight: 3,045 kg Payload: 1,955 kg TÜV (technical inspection): 12/2025, emissions test: 03/2025 Sprinter 516 CDI 16+1 seats Automatic sliding door on the passenger side with extending step Double-leaf doors at the rear Central locking with remote control Fully automatic transmission 2 x electric windows, mirrors, heated mirrors Microwave Auxiliary heater 2nd fan Nwodpfxez A I R Ro Ac Aol Front armrests Heated driver's seat Radio/CD Emergency exit, among others, through a roof window Tachograph Tires: 195/75R16, approx. 40% tread Price: €10,000.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to a value of €5,000.00 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typos, and prior sale.

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Carlson Filtration Type FZ164 Filter Housing P/N: 5052164040 Diameter: 16"x4 Volume: 191L Nwodpoyq Ryhjfx Ac Ajl Year: 2015 Pressure PS: 0-8 Test Pressure: 11.5Bar Fluid Group: 1 and 2 316L 4 pieces available Carlson housings modified for Pall SUPRAPak modules. Parts are still there to return to original set up

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, operating hours: 8,047 h, load capacity: 1,600 kg, lifting height: 4,580 mm, free lift: 1,430 mm, fuel type: gas, mast type: triplex, construction height: 2,200 mm, motor manufacturer: VW, fork length: 1,380 mm, tire condition: 90 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 18 x 7 - 8, overall weight: 3,162 kg, total height: 2,200 mm, total length: 2,300 mm, total width: 1,120 mm, fuel: liquid petroleum gas (LPG), Equipment: cabin, sideshift, STILL RX 70-16 T – LPG forklifts TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 4.580 mm Closed height: 2.200 mm Free lift: 1.430 mm Mast: Triplex (3F458) Fork length: 1.380 mm Fork carriage: 2A Drive: 4-Zyl. Treibgas Engine: VW Tyres: Superelastik SE 18 x 7 - 8 (90%) / 18 x 7 - 8 (90%) Service weight: 3.162 kg Length: 2.300 mm Width: 1.120 mm Year of manufacture: 2020 Operating hours: 8.047 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin Nwedpfx Aoz Aqhuec Ael ATTACHMENTS Sideshift, Fork positioner Internal no.: 1202053 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: excellent (used), Safety relay, safety control, overrun relay, flow monitor, contactor, relay, current monitor -Manufacturer: Telemecanique, Power Monitor Ovp -Type: RM4JA31M -Cardboard dimensions: 90/80/H25 mm -Weight: 0.1 kg Nwjdpfx Acozmucdj Ael

Year of construction: 2011, condition: excellent (used), machine/vehicle number: MBUT100A, Telemecanique / Schneider Canalis KNT - 100A busbar system - complete package Stock approx. 85 running meters Canalis KNT 100 ED4204 + ED4306 100A Ampere - 5 poles - L1 L2 L3 N PE Voltage Ui max. 500V, frequency 50 - 60 Hz Bar length: 25x 3m 9x 1.5m incl. connectors, various end pieces and brackets, flexible corner connectors and several outlet boxes Dismantling was carried out by a qualified electrician. Busbars are in very good condition Only for sale complete Stock items, immediately available ----- old Kloeckner Moeller BD1 system still available ! Busbars, corner parts, feeders and outgoing feeders for the old Kloeckner Moeller BD1 / BD 1 system available !!! Nodpfxerwiyds Ac Aowl Please inquire ! Are you also looking for a crane system?

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, overall weight: 22,400 kg, total length: 24,000 mm, total width: 3,500 mm, load capacity: 40 kg, power: 40 kW (54.38 HP), Equipment: documentation/manual, ABUS bridge crane, 40 t + 16 t auxiliary winch. Year of manufacture: Crane and main winch: 1997. Auxiliary winch: 2003. Nedpfx Aszzagqoc Ajwl The crane was installed in this facility in 2003. Span: 21,100 mm. ABUS wire rope winches. Radio remote control. Power supply: 3 x 400 V. Price excludes dismantling. Dismantling and transport can be arranged.