Used Tebetron 80/70 for sale (26,772)

Condition: excellent (used), Here we offer you a climate chamber. Water-cooled Test chamber volume: 350 liters Internal chamber dimensions: Height 750 mm, Width 650 mm, Depth 720 mm External dimensions: Height 1800 mm, Width 850 mm, Depth 1640 mm Temperature working range: Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 5.0 K/min Climate working range: Bjdpfxsygumko Akajdb Temperature range: +10°C to +90°C Humidity range: +10% to 98% RH Dew point range: +5°C to 89.5°C Temperature deviation: ±0.1 - ±0.3 K over time Humidity deviation: ±1 - ±2% RH over time up to 90% RH max. ±1 - 3% RH over time above 90% RH Electrical connection: 400V +6-10%, 3/N, 50Hz Connected load: 13 kW Rated current: 25.5 A Refrigerant: R404A / R23 Weight: 650 kg Type: CS-70/350 For your safety as a buyer, please note the following information: The following steps are performed in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a trial run which is monitored with calibrated equipment. Condition: used Scope of delivery: (see photo) (Specifications, technical data and details may be subject to change. Errors excepted.) For any further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Climate Test Chamber T-70/600 Water-Cooled Temperature Range: -70°C to +180°C Rated Voltage: 400V 3/N PE 50 Hz Rated Power: 6.7 kW Rated Current: 10.2 A Compressor: TFH2480Z/TFH2511Z, Refrigerant R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for set and actual temperature values - Easy adjustment via +/- keys - Digital input for temperature in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for user-side test specimen connections Bedpfx Aksygulteajdb Shelving: Stainless steel, shelf area 820 x 710 mm Load capacity per shelf max. 35 kg Total load capacity with full shelf configuration 100 kg Cooling Unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Testing: Temperature range -70°C to +180°C Temperature deviation ±0.1 to 10.3 K over time Temperature change rate according to DIN 50 011, Part 12 measured at the center of the test chamber: Heating: 2.5 K/min Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, rated voltage 400 V, without test specimen, without thermal radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) External dimensions 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current 10.2 A Protection class IP 22 Condensate drain non-pressurized, R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information reserved!) Further questions can be answered by phone.

Condition: used, machine/vehicle number: 16925, Year of construction: 2018, operating hours: 3,193 h, load capacity: 8,000 kg, lifting height: 3,450 mm, load center: 500 mm, construction height: 2,860 mm, fork length: 2,000 mm, front tire size: 8.25-15, rear tire size: 250-70/15, overall weight: 12,800 kg, enginetype: Diesel, manufacturer: Still Bdjdpfoyvmwnsx Akasb

Condition: used, Year of construction: 2004, operating hours: 90,627 h, functionality: fully functional, clamping force: 180 kN, screw diameter: 18 mm, For sale is an injection molding machine of the brand Arburg and the type 170U 180-70 The machine is fully functional and ready for immediate use Technical data Year of construction: 2004 Operating hours: 90,627 h Cylinder Ø 18 mm Clamping force: 180 kN Valve gate: Pneumatic Internal pressure transducer On request, transportation and loading can be organized at extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website Bjdou Hqg Topfx Akasdb

Condition: used, Year of construction: 2003, operating hours: 71,732 h, functionality: fully functional, clamping force: 180 kN, screw diameter: 25 mm, For sale is an injection molding machine of the brand Arburg and the type 170 U 180-70 The machine is fully functional and ready for immediate use Technical data Year of manufacture: 2003 Hours: 71.732 h Bodpfx Akou Hqg Heaodb Valve gate: Pneumatic Screw: Ø 25 mm Clamping force: 180 kN Core pull Internal pressure transducer On request, transportation and loading can be organized at an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2005, operating hours: 67,200 h, clamping force: 180 kN, screw diameter: 30 mm, For sale is an injection molding machine of the brand Arburg and the type 170 U 180-70 The machine is in a technically good condition and has been fully functional and professionally dismantled Technical data: Year of construction 2005 Machine no.: 198067 Clamping force: 180kN Operating hours: 67,200 Cylinder: D30mm Bjdpfotwadvex Akaedb Distance between tie bars: 170 mm Dimensions: 2.690*889*1831 Weight: 1,650 kg Selector switch and conveyor belt included in the offer Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2004, clamping force: 800 kN, screw diameter: 35 mm, For sale is an injection molding machine by Krauss-Maffei, type 80-220C2 The machine comes from a clean operation that places great importance on maintenance and is fully operational immediately after installation Year of manufacture: 2004 Machine number: 61004709 Clamping force 80 tons Equipment: -Cylinder D35 -1 hydraulic core pull -Pneumatic needle shut-off -Tie bar withdrawal device on the operator’s opposite side Transport and loading can be organized throughout Europe for an additional charge if desired. Prices plus VAT Inspection possible by appointment. Contact us—our team is happy to assist you. Trade-in or exchange possible! Machines buying / selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further info or means of contact, visit our website Bdedpewqmvgjfx Akasb

Year of construction: 2017, condition: like new (used), Production line for manufacturing NESPRESSO coffee capsules Comprising the following components: Item 01) Injection molding tools for the capsule, Manufacturer: FOSTAG AG 1 pc. mold with 16 cavities 1 pc. mold with 32 cavities Bodpfx Aow Nriujkasdb Item 02) Two-component injection molding machine, Manufacturer: ARBURG, Model: 720A3200-800, Year of manufacture: 2017 The capsules are produced as free-falling parts.

Condition: used, Year of construction: 2020, sweeping width 942 mm working width Bodendüse: 700 mm tank Reinigung: 79 l tank Schmutzwasser: 83 l weight of the machine ca. 145 kg dimensions of the machine ca. 1,32 x 0,7 x 1,1 m - Exhibition machine and demonstration machine, like new- - Most compact ride-on scrubber-dryer from DiBO with 2 brushes - Possibility to dispense detergent: in ECO mode with constant Saving or automatic regulation of the machine depending on the speed of the machine Brush motors and suction: even less energy consumption, even more Smoothness - Display: large, multilingual, including hour counter, battery level and work programs - Memory card: allows the storage of battery charge cycles and Power consumption of the motor Bjdpfx Asgvqzgjkajdb - CFS system: water distribution from the middle of the brush to avoid waste Avoid cleaning solution - SLS system: self-leveling electronic system to keep the brush always lies perfectly on the floor - EDD system: suction cup for the best results during drying and during Area performance was developed - Wheels: oil resistant - Extraction: 2 levels with fans and stainless steel shaft

Condition: good (used), Bracket, holder, support block, retaining support Bodjlry S Hjpfx Akaodb -Bracket: solid construction, 2 pieces -Hole: Ø 48 mm -Screw holes: Hole spacing 165 x 40 mm / Ø 25 mm -Price/Sale: complete -Dimensions: 205/80/H370 mm -Weight: 50 kg

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 635 x 6 mm -Inside: Ø: 80 mm -Bolt circle: Ø 120 x 22 mm -Number of teeth: 70, see photo Bdedpfxjvzn Dho Akasb -Weight: 10 kg

Condition: used, Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps, perforated gratings -Grid level: perforated grid 800 x 270 mm Bodpfx Aksrrzdmjajdb -Total height: 70 mm -Holes: Ø 8/12 mm -Gratings: Hot-dip galvanized -Quantity: 2x grids available -Price per piece -Weight: 5,8 kg/piece

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 630 x 6 mm -Inside: Ø: 80 mm Bdodpfx Aksvzn N Djaob -Bolt circle: Ø 120 x 22 mm -Number of teeth: 70, see photo -Weight: 9 kg

Condition: good (used), Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder -Manufacturer: Festo, Guide cylinder type DFM-20-80-PA-GF 170845 -Piston: Ø 20 mm -Stroke: 80 mm -Max. pressure: 10 bar -Number: 6x cylinders available -Price: per piece -Dimensions: 165/85/H35 mm -Weight: 1.4 kg/piece Bjdoxlnnkepfx Akajdb

Condition: excellent (used), Balancing valve, shut-off valve, ball valve, ball tap, pressure relief valve, control valve, flow switch, balancing valve -Manufacturer: Alfa Laval, control valve flow switch, unused -Type: RV4 .: 1762570-80 -Size: DN25 Bdsdpfx Akoq Rx Absaeb -Number: 2x valve available -Price: per piece -Dimensions: 125/104/H195 mm -Weight: 3.6 kg/piece

Condition: used, fuel type: electric, Heavy-duty castors, heavy-duty wheel, tire, forklift drive wheel -Manufacturer: Gumasol heavy duty roller heavy duty wheel -Wheel size: 250/80-170 -Number: 5x wheel available -Price per piece Bdedpfx Aekpwqbokaob -Weight: 5.1 kg/pc.

Condition: good (used), Fan head, chamber fan, Dorade fan, mushroom fan, ship fan, deck fan, ventilation, mushroom head hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, louvered damper, backflow preventer, lamellar fan, mushroom head hood -Manufacturer: WMW, fan head type MTK DN 80 GL 37081-86 HH -Flange: DIN 2576 ND10-NW80/88 -Bolt circle Ø 160 x 18 mm Bodpfx Aeirf Enskasdb -Quantity: 5x hood available -Price: per piece -Dimensions: 310/200/H290 mm -Weight: 12.2 kg/pc.

Condition: used, Gratings, grating, light grilles, insert grilles, insert grilles, stair treads, safety steps, grating step, step -Grating step: 800 x 240 mm -Total height: 70 mm -Struts: wall thickness 2 mm -Bar height: 25/10 mm -Gratings: hot-dip galvanized -Number: 1x grates available -Weight: 6kg Bdedpfx Akjrrzd Roaob

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade Bodpfx Ajvzmnfekasdb -Saw blade: Ø 870 x 6 mm -Inside: Ø: 80 mm -Hole circle: Ø 160 x 27 mm / Ø 120 x 21 mm -Number of teeth: see photo -Weight: 30 kg

Condition: used, Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps -Grid step: 800 x 270 mm -Total height: 70 mm Bdsdpfx Akjrri Tpjaeb -Struts: wall thickness 2 mm -Bridge height: 30/9 mm -Gratings: Hot-dip galvanized -Quantity: 4x grids available -Price per piece -Weight: 6kg/piece

Condition: good (used), Bezel, moving bezel, steady rest, lynette Bjdpfx Akswcdvzeaodb -Bezel: moving -Tip height: see photos for dimensions -Plating: Brass -Dimensions: 170/80/H275 mm -Weight: 2.9 kg

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams Bsdpfx Akjfw Rwxeaedb -Manufacturer: Festo, standard cylinder type DNU-80-570-PPV-A -Stroke: 570 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm/M20x1,5 -Price: per piece -Number: 2 Stück -Dimensions: 840/95/H95 mm -Weight: 7,6 kg/piece

Condition: good (used), Clamping angle for workpiece clamping -Dimensions: 180/70/H100 mm -Thickness: 18 mm -T-slots: 12 mm Bdsdpfxsb E N Ttj Akaob -Surface: milled -Weight: 3.5 kg

Condition: excellent (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch temperature test chamber water-cooled Temperature range -70°C to + 180°C Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature deviation in terms of time ± 0.5 to ± 2.0 K Temperature change rate cooling 5.0 K/min Temperature change rate heating 6.5 K/min Heat compensation +20°C 3000 W Thermal compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 765 mm Height 750 mm External dimensions: Width 870 mm Depth 1595 mm Height 1775 mm Test chamber volume 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50 Hz Rated power: 10 kW Rated current: 21 A Sound level at 1m distance (free-field measurement) < 69dB (A) Lateral feed-through 5.5 cm / 12.5 cm Cabinet is water-cooled Refrigerant: R- 404A and R 23 Weight approx. 570 kg The following information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) Bsdju H U Twspfx Akaodb (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Vötsch Type: VCS 7034-5 Water-cooled climatic test chamber Vötsch VCS 7034-5 Test chamber capacity 335 liters Performance for temperature tests Temperature range -70 to +180°C Temperature deviation temporal K ±0.1 to ±0.5 Spatial temperature deviation K ±0.5 to ±2.0 Temperature gradient 1 to 4 Rate of change : Cooling 6.7 K/min Heating 6.8 K/min Heat compensation at +20 °C 3000 W / at -20°C 3000 W Temperature calibration values +23 °C and +80 °C Performance for climate tests Temperature range +10 to +95°C Temperature deviation in time ±0.1 to ±0.3 K Spatial temperature deviation ±0.5 to ±1.0 K Temperature gradient 1 to 2 K Humidity range 10 to 98% Bsdpfx Akjuudx Doajdb Humidity deviation in time ±1 to ±3% Dew point range -3 to +94°C Heat compensation 400W Climate calibration values +23 °C / 50 % r.h. and +95 °C / 50 % r.h. Test chamber dimensions: Width 580mm Depth 765mm Height 750mm External dimensions: Width 870mm Depth 1595mm Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Sound pressure level: 64dB(A) Cooling water consumption: 1.4m³/h Refrigerant: R-404A / R-23 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.