Used Sweco Ph06Y2 Pharmaceutical Separator for sale (7,167)

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order. Nedpjua Tbwjfx Aaajcr

Year of construction: 2024, condition: new, functionality: fully functional, Description of Use: Nodpsh D H Rcsfx Aaascr Overband Magnetic Separator (MAGNETIC series) is applied to loose materials to automatic removal of ferrous impurities in the process of waste recycling. Apart from metal recovery the Separator has a protective function for equipment in further steps of recycling process. They are usually installed on top of transport conveyors. Belt separators are used in many fields: -scrap removal from coal and aggregate -wood and plastic purification -iron particles recovery from cable shredding -iron rejection from WEEE recycling process -municipal waste purification Contact us for more information

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: XE23-024-013, volume flow: 2,000 m³/h, input voltage: 230 V, overall weight: 95 kg, type of input current: three-phase, empty load weight: 95 kg, cooling capacity: 1.5 kW (2.04 HP), ExoMist HPMCD Large 2000 oil mist separator for metalworking machines. Technical data: Nsdoy Edrzspfx Aaajcr Model: HPMCD Large 2000 P/N: HPM2000STAR Serial number: XE23-024-013 Year of construction: 2023 Power: 1.5 kW Voltage: 230 / 3 / 60 Max current: 6.25 A Air flow: 2000 m3/h Weight: 95 kg CE marked

Condition: excellent (used), Lima RM 300 Separator Nsdey D T N Hopfx Aaajcr

Condition: good (used), functionality: fully functional, power: 11.03 kW (15.00 HP), 3000 mm cutting length – separating cut – blade diameter 500 mm – cutting height 170 mm Njdpfx Asyxyw Tsaascr

Condition: good (used), Oil water separator with pre-separation Tank volume (litres) 228.4 Compressor capacity max m³/min 58,5 Condensate inlet connection 3 x G1/2, 1 x G1 Ncodpfx Asg Db R Asaaor Filling volume in l 158.8 Filter capacity in l 1 x 37.2 / 1 x 40.3

Condition: excellent (used), Year of construction: 2012, operating hours: 1,522 h, Fish / Meat Bone Separator Make: Sepamatic Model: 2000VT Built 2012 Low running hours: 1522 Ncodpfx Aajyckiaeajr supplied with 2 drums

Condition: used, Year of construction: 2000, machine/vehicle number: LC593, Used complete pharmaceutical filling glass line - 3500 BPHTechnical Specifications & Performance DataThis used bottling line is a complete, second hand pharmaceutical packaging solution designed for the filling and packaging of glass bottles for infusion-type applications. The line is currently in production and supports multiple dosage formats with integrated washing, filling, capping, crimping, sterilization, inspection, labeling, cartoning, and palletizing. Engineered for sterile handling, it uses purified water (PW), water for injection (WFI), and sterile compressed air in critical stages.Production speed: 3500 bottles per hourBottle volumes supported: 0.2L, 0.25L, 0.4L, 0.5LContainer type: Glass bottles (infusion/IV-style)Line configuration: Depalletizer, Bottle Washer (PW/WFI + sterile air drying), Filler, Vacuum stage, Bottle Capper, Aluminum Crimping Machine, Tray Loader, Autoclave, De-trayer, 2 x Manual Inspection Stations, Labeling Machine, Cartoning Machine, Carton Sealer, PalletizerSterilization: Autoclave by SBMOperation status: In productionAdvanced Automation & Control SystemsThe line features integrated handling and synchronized conveyors to maintain steady flow through washing, filling, closing, and terminal packaging stages. Manual visual inspection stations are positioned downstream of sterilization to ensure product quality. Format changeover is designed to handle multiple bottle sizes from 0.2L to 0.5L, enabling efficient batch transitions. Standard pharmaceutical best practices such as sterile air drying and clean utility segregation support controlled operations. Electrical parameters and PLC/HMI specifications are line-dependent and can be aligned with site utilities.Production Line Integration CapabilitiesAs a complete packaging line, this system operates in-line from depalletizing to palletizing. The upstream sections prepare and clean glass containers, the midstream modules manage accurate filling and secure closure with crimping, and the downstream area performs sterilization, inspection, labeling, case packing, sealing, and palletizing. The line offers multi-format flexibility for 0.2L, 0.25L, 0.4L, and 0.5L glass bottles and can be integrated with site-level quality systems and traceability procedures. Conveyors and accumulation zones are configured to balance cycle times across process steps.Machine Condition & Maintenance HistoryThe line is currently in production, indicating ongoing operability and maintained status. Washing with PW/WFI and sterile air drying underscores disciplined hygienic routines aligned with pharmaceutical processing. Regular operation across all stations—from depalletizer through palletizer—demonstrates a cohesive, production-ready asset suitable for immediate deployment after site adaptation.Operational Performance & VersatilityDesigned for glass bottles and sterile liquid products, the line combines precise filling with a dedicated vacuum stage and reliable closure via capping and aluminum crimping. The presence of an autoclave enables post-closure sterilization, while dual manual inspection stations provide visual particle control. The labeling, cartoning, ... Nodpfx Asydpa Toaaecr

Year of construction: 2025, condition: excellent (used), Separator TSP.155 The separator features five shafts, providing more space within the unit for the material to be loosened along the running/rotational direction of the shafts. The shafts are arranged in the housing at a 15° angle to each other, creating a progressive rounding effect as material is guided into self-rotation even before full engagement. This results in a significantly higher throughput and improved material quality compared to units with fewer shafts. Shafts BS252 Nedpfx Aeyvrzxoaaecr Equipped are BS252 block disc shafts designed to break up very wet and stubbornly compacted soils, crush clods of earth, and efficiently mix additives such as lime or compound binders at high throughput rates. With this configuration, the Terra-Star enables soil processing long after other equipment would need to be withdrawn from use. For excavators from 27 tons Weight in kg: 2700 Throughput: up to 120 m³/h Leak oil line required: 1 Series: 252

Year of construction: 1979, condition: used, Westfalia Separator, last used in a fruit juice plant. The separator's control system was modernized by GEA. The product is clarified in the centrifuge bowls and conveyed further under pressure. Solids collect in the solids chamber and are periodically discharged automatically. During CIP cleaning, the cleaning fluid is pumped in a circuit. Additional title: Disc centrifuge Intake capacity: 22000 l/h flow rate for fruit juice approx. 4,000 l/h Drum velocity: 6500 rpm Density liquid phase: 1 kg/dm3 Density solid phase: 1.4 kg/dm3 Power: 18.5 kW Current: 37 A Voltage: 380 V Frequency: 50 Hz Length: 1485 mm Width: 850 mm Height: 1470 mm Weight: 1200 kg Material: Stainless steel surfaces that come into contact with the product Position: on a 685 x 585 mm foundation Features: Drum, drive, inlets for product and displacement fluid, control water inlet with solenoid valve, drain, solids outlet, control water drain, circulation monitor, oil sight glass, brake, control valve, hood flushing, pressure gauge Nedpfx Aoyr Ic Noaaecr

Condition: used, Compressed Air Dryer PARKER HIROSS for Compressor Systems Mechanical Condensate Separator, Water Separator Refrigeration Dryer with water-cooled aftercooler for removal of water vapor and cooling of compressed air or gases. Njdpfxsdzqn Ue Aaajcr 1 unit Aftercooler Type WFN009 DHH16 Air flow rate (standard): 540 m3/h = 9,000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1,020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1,030 x 850 x 200 mm + 1 unit Water Separator Type CSP 008 Standard flow rate: 480 m3/h = 8,000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 unit Mechanical Condensate Separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss All components assembled as shown in the photos Mounted height (upright): 2,000 mm Total weight approx. 40 kg 2 identical units available

Condition: used, Hydr. scissor lift table WEIDMANN type E5/13-1 Serial no. 30403339 Year of construction 1982 / 2007 Load capacity 500 kg Platform size 2000 x 1200 mm Lift max. 1280 mm Overall height - table bottom 290 mm Overall height - table top max. 1570 mm Table height with safety support 1430 mm Lifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 bar Motor power 1.5 kW Mains connection 400 Volt, 50 Hz. - Rotary switch on the hydraulic unit for up and down - Infinitely adjustable lowering speed via throttle valve Ncodpfxshlnzno Aaajr - 1 lifting cylinder - Hydraulic unit built in 2007 with tank opposite - Safety protection frame with limit switches dead weight 660 kg good condition

Condition: repair required (used), Year of construction: 2007, Color separator Separation & Sorting Technology Gmbh Year 2007 Missing sensors Ncsdpfx Aaeu Icgbjasr Available catalog

Condition: excellent (used), Lima 500 Separator Ncodpey A Ia Rjfx Aaaer The set includes 3 sieves after refurbishment.

Condition: excellent (used), Separator Lima 400 S Year of manufacture: 2008 Ncodpfsy A H U Tsx Aaaer

Year of construction: 2016, condition: used, The metal separator, 3 units, from Sesotec, is available for sale. Our GF metal detectors for pneumatic applications provide optimal protection against production downtime, stoppages, and customer complaints. Suitable for steel, copper, non-ferrous metals, and stainless steel. Nedjyrl Nyjpfx Aaaocr

Year of construction: 2026, condition: like new (used), Binder dispenser / lime spreader, used for a short-term rental. The dispenser features an integrated weighing system with display; the 18V battery system is from Makita and is thus independent of any external power source. An OilQuick 70/55 adapter plate is installed but can be changed if required. Feel free to contact me with any questions. Best regards, Jürgen Wolf. Suitable for excavators from 15 t. Required drain line: 0. Ncodjyupynjpfx Aaaer

Condition: refurbished (used), Year of construction: 2007, operating hours: 3,892 h, Hello, I have a KOMPTECH HURRIKAN pressure separator for sale from 2007. The machine has been completely reconditioned as in the photo. It has an electric drive and a diesel engine. Engine power: 53 KVA Voltage: 400V 63A ID number: W0908016471KB4096 Weight 6.5t Worked 3892 mth Ncsdpfx Aov Upakjaajr

Condition: used, Dust Cyclone, Dust Separator, Used machine Ncsdpfsxt Tw Hox Aaaer Overall dimensions: 1200 x 1150 x 3270 mm Inlet side: 280 mm Outlet side: 250 mm Cylinder shell height: 800 mm

Condition: used, Marvel Townsend StorkDMM50 meat bone separator to produce best quality low pressure deboned meat when used in conjunction with a Baader or SEPAmatic. This machine has come direct from a closed meat factory in Scotland. Almost impossible to find these machines on the used market. Nedpfxolkc I Rj Aaajcr

Condition: excellent (used), Year of construction: 2011, We are selling 2 pieces of Alpha 1200 separators, year of manufacture 2011. Ncjdpslpafdsfx Aaaor New rotors installed.

Year of construction: 2018, condition: new, functionality: unexamined, – For removing foreign matter from municipal and industrial sludge and from process water – Continuous screening, dewatering, and discharge of foreign matter in a single operation - Compressor for compressed air generation - Electrical technology, Strainpress control and switchgear panel Process data: - Sludge type: digestate from wet anaerobic digestion of biowaste - Sludge quantity: expected 8–10 m³/h - Solids content in feed (average/max): 4–6% DS (dry solids) - Screen/slot size for preliminary screening: 12 mm Performance data: - Number of machines: 1 (1 in operation/0 standby) Nedsyvhr Hspfx Aaascr - Throughput per machine: expected 8–10 m³/h - Solid throughput per machine: 4–6% DS

Condition: new, This listing is for a Brand New Harvest Right Large Pharmaceutical PRO Freeze Dryer sold through We are stock holders in UK Price Before VAT - £5,950 Harvest Right’s Pro Pharmaceutical Freeze Dryer removes water from plants and organic compounds while they are in a frozen state. This locks in the freshness of herbs and plants. Their appearance, nutritional content, and potency remain the same as when they were fresh. Freeze drying completely removes water in about 24 hours. No other preservation method comes close to removing water this quickly. This is important because the longer a harvested plant or compound retains water, the greater the chance it has of spoiling and losing nutrition and potency. What’s Included - Large Pharma Freeze Dryer - Premier Vacuum Pump - Vacuum Pump Oil - Oil Filter - Stainless Steel Trays (set of 8) - Guide to Freeze Drying Key Features & Benefits - The freeze dryer has built in intelligence. It automatically and perfectly manages the freeze drying process - The ideal vacuum pressure and drying temperature is maintained for each material—preserves freshness and potency - 10.25 square feet of tray space—nearly twice the capacity of Harvest Right’s standard Large freeze dryer - Shelf Unit Has shelves for 8 trays (each tray 228.6mm W x 520.7mm D x 19mm H) - 6 liters of ice capacity - Weight: 68KG Warranty 1 Year international warranty provided by Harvest Right. Dimensions Overall product dimensions: 514.3mm W x 603.2mm D x 781mm H Perfect for a counter top, cart or table. Power A dedicated 20 amp circuit is required. Shipping Info - The large freeze dryer ships in one package with a total weight of 177KG - Item will be delivered in international shipping crate (must be purchased from Harvest Right when exporting machines out of USA) - One freeze dryer in fully encased shipping crate: 920 x 770 x 1500H Njdpfx Aaexx Agzoaocr - If you would like to collect from site, we would be able to cut down the crate to fit in smaller vans: 920 x 770 x 1050H + extra box of parts Maintenance Simply filter and replace oil. Takes one or two minutes. Vacuum Pump Each vacuum pump has been factory tested to guarantee 25 microns (25,400 Microns = 1 Inch of Hg) or better, and listed CFM performance. Vacuum Pump Technical Specifications Oil: Harvest Right Oil, Robinair Premium High Vacuum Pump Oil or JB Industries Black Gold Vacuum Pump Oil Only DC Motor Energy Efficient Voltage: Standard, 230v Dimensions: 414mm x 152.4 x 307.3 Weight: 14.5KG Noise: 52 decibels Product Comparison Industrial Oil Pump vs Standard Oil Pump Oil Changes This new Industrial Pump rarely needs to have the oil changed or filtered. The pump has a gas ballast feature that makes it so water does not stay in the oil. Because of this, the oil in the pump will be pristine and clear, even after 30 or more batches. You simply won’t need to change the oil until you have run 25 to 40 batches. Whereas, the oil in the standard vacuum pump needs to be changed and filtered every 4 or 5 batches (when using the new 3/8 inch vacuum hose). Vacuum Pressure Under cold and hot conditions the Industrial Pump will pull a deeper vacuum than the Standard Pump. Under cold conditions the difference is .05 Pascal for the Industrial Pump and .08 Pascal for the Standard Pump. Whereas, under warm conditions the difference is much greater: .05 Pascal for the Industrial Pump and 2.05 Pascal for the Standard Pump. Hence, the Industrial Pump is especial...

Year of construction: 2017, condition: used, Manufacturer : Eclipse Magnetics Model : Housed Grid ECHD150 Type : Housed Easy Clean Grid Magnetic Separator Year: 2017 Nsdpfx Aex R D H Aoaaecr Atex : Ex II1/2DcTX + II1/2GIICcTX Input / output : Ø 150 mm Machine dimensions with base: 100 x 90 x 120 cm Machine dimensions without base: 208 x 214 x 270 mm Weight : 40 kg

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,500 l, Equipment: documentation/manual, BRINOX 3,500 L Storage Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – Like New Manufacturer: BRINOX d.o.o. Type: SVBBHI-3500 Tag No.: BH6772-BH1001 Package 30 Serial Number: 1003462 Year of Manufacture: 2020 Nedpfx Aeylnwyeaaocr Condition: Like new / unused TECHNICAL DATA Product Type: Storage / Process Tank Nominal Volume: 3,500 litres Total Volume: 4,082 litres Jacket Volume: 226 litres Empty Weight: approx. 1,760 kg Product-contacting Material: 1.4435 (AISI 316L pharmaceutical grade) Jacket Material: 1.4404 CE Marking: CE 0036 Permissible Pressure PS (Tank): -1 / +3 bar Permissible Pressure PS (Jacket): -1 / +6 bar Test Pressure PT (Tank): 5.6 bar Test Pressure PT (Jacket): 10.8 bar Permissible Temperature TS: -10 °C to +150 °C Fluid Group: 2 Designed in accordance with AD 2000 regulations Pressure vessel according to PED 2014/68/EU Category IV Module G – Individual Inspection Notified Body: TÜV SÜD Industrie Service GmbH (ID No. 0036) TÜV approval including design review, final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel has been fully inspected and released by the manufacturer. Tests carried out include: • Pressure test as per PED • Design review by TÜV SÜD • Visual inspection of all weld seams • Non-destructive testing (RT, PT) • Dimensional and drawing check (as-built) • Review of material certificates • Calibration check of manometers • Verification of markings • Documentation review as per inspection checklist Full FAT and TÜV inspection reports available. EXECUTION • Cylindrical, horizontal storage tank • Double jacket for heating/cooling • High-quality pharmaceutical design • Manhole with round pressure closure • CIP pipework • J-pipe / internal piping • Sight glass DN80 • Multiple spare and process connections • Biocontrol flanges • Heavy-duty mounting blocks / trunnion design • Lifting lugs • Nameplate with complete PED marking DOCUMENTATION – complete and well-structured • EU declaration of conformity • TÜV certificate with inspection report (Module G) • TÜV design assessment and certification • 3.1 material certificates • Welder lists and work samples • Non-destructive test reports (RT, PT) • Dimensional inspection reports • Manometer calibration reports • Surface and production reports • Parts list • Detailed drawings (body, lid, CIP, J-pipe, etc.) • Operating and maintenance manuals Complete digital documentation folder available. CONDITION • Never put into operation • Was in storage • Interior surface as new • No corrosion • No signs of use • As-new industrial condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Chemical media • GMP production facilities • Process and waste management plants SPECIAL FEATURE Premium BRINOX pharmaceutical-grade manufacture with full PED Module G individual inspection by TÜV SÜD, CE 0036 marking and documented FAT testing. Not a standard tank – certified project quality with comprehensive GMP-compliant documentation.