Used Stand-Alone Auger Filler for sale (9,348)

Condition: used, Year of construction: 2023, Overview This Robopac Genesis Futura HS pallet winder was built in 2023. It has under 500 operating hours - technically close to new. Ledpfxszzz R De Akljag The rotating ring carries the pre-stretch carriage around the stationary pallet for high throughput without moving the load (see Capacity below). Delivered as a stand-alone unit with integrated roller conveyor, prepared for line integration over Ethernet TCP/IP. Technical data - Manufacturer: Robopac - Model: Genesis Futura HS - Year of manufacture: 2023 - Machine type: automatic rotating-ring stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: up to 92 pallets/h (13 wraps, H 1,000 mm), 77 pallets/h (17 wraps, H 1,600 mm), 70 pallets/h (19 wraps, H 2,000 mm) - Pallet size: 800 x 1,200 mm - Load height: 1,000 - 2,000 mm (incl. pallet) - Load weight: 100 - 1,200 kg - Conveyor height: approx. 550 mm; speed 15 m/min - Machine height: approx. 4,862 mm; hall height from 7,000 mm - Pre-stretch: SCV-B carriage, electronically adjustable 150 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. diameter 250 mm, core 76 mm, max. weight 20 kg - Control: Siemens SIMATIC S7-1200 PLC, Siemens TP700 7" colour touch panel - Wrapping programs: 15 (expandable to 64), 12 steps/recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry, oil-free - Documentation and HMI languages: German / English Equipment - High-speed rotating ring: power transfer to the pre-stretch carriage via sliding contacts, Wi-Fi commands - Integrated roller conveyor with pneumatic pallet lifting station (SMC PL-D) - Automatic film clamping, cutting and wide-band sealing unit - Fixed vertical hold-down (top press unit) stabilises the load during wrapping - Roping device gathers the film web from below - Photocell for automatic pallet-height reading, plus a pre-scan photocell with 3,800 mm reflector mast - Inverter-controlled IE3 motors, SEW geared, IP55, FESTO pneumatic components, SICK photocells - Siemens Scalance S615 VPN / firewall router and Scalance XB005 Ethernet switch, TCP/IP link to up-/downstream machines - Safety: Reer Safegate SMPO 1803 light curtain, fenced enclosure, dynamic fall protection on the ring - Operator panel separate from the main switch cabinet, plus remote control unit with emergency stop - R-Connect remote monitoring hardware: cloud portal for production data and teleservice - TPM package (centralised lubrication points, maintenance intervals on display), integrated HMI troubleshooting - Complete documentation on USB stick and in print: operating / maintenance manual, wiring / pneumatic diagrams, spare parts catalogue, layout Condition Used - almost as new, no visible production wear. Still installed and under power; inspection in operation on request. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: excellent (used), functionality: fully functional, Pamasol Single Stage Filler Type: 2079 Laodpfeznw Aiex Aklog Device is in excellent condition, very little use. Unit was removed from the a "blue chip" pharma company operating in Cork, Ireland.

Condition: new, MC SEAMER Automatic Can Seamer – Stainless Steel The MC SEAMER automatic can seamer is designed for the automatic sealing and crimping of metal containers in industrial production lines for the food and canning industries. The machine automatically joins the can body and its lid through a double sealing process, providing a hermetic and uniform seal, which is essential for subsequent pasteurization, sterilization, storage, and distribution processes. Its robust stainless steel construction and enclosed work area with safety guards make it particularly suitable for continuous production industrial environments. MAIN FEATURES -Manufacturer: MC SEAMER -Type: Automatic can seamer -Application: Automatic sealing/crimping of containers -Industrial rotary sealing system -Automatic can handling and positioning -Automatic placement and sealing process -Designed for continuous industrial production -Robust stainless steel construction -Enclosed work area with safety guards -Integrated control panel with Siemens HMI -Integrable into canning and packaging lines -Designed for professional food processing environments APPLICATION The MC SEAMER is designed to automatically seal cans by forming the mechanical bond between the container body and its corresponding lid. The cans are automatically fed into the machine and transferred to the sealing section. Once sealed, they are discharged to continue directly to the next stage of the process. It can be integrated with: Can fillers Automatic lid feeders Product dosing systems Can conveyors Weight checkers and inspection systems Pasteurizers Industrial autoclaves Can washers and dryers Labeling machines Packaging equipment and end-of-line equipment APPLICATIONS Particularly suitable for canning industries, food manufacturers, and industrial packaging plants that require an automatic system for sealing metal cans. It can be integrated into lines for vegetables, legumes, fish and seafood, meat products, pet food, sauces, ready meals, and other canned goods, depending on the installed format and the machine configuration. The MC SEAMER can be used as a stand-alone seamer or integrated into a complete automatic line for filling and sealing cans. Machine available for inspection. Ljdpfx Akezwv H Sjljag Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2021, Overview This Robopac Helix 4 EVO pallet winder was built in 2021, with less than 500 operating hours - technically close to new. The arm carries the pre-stretch carriage around the stationary pallet, so the load itself is never turned - the configuration for unstable, fragile or heavy loads at high output (capacity below). Built as a stand-alone unit. Technical data - Manufacturer: Robopac Ledpfx Akszzz Rdsleag - Model: Helix 4 EVO - Year of manufacture: 2021 - Machine type: automatic rotating-arm stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: 82 pallets/h (11 wraps, 1,000 mm H), 73 (15 wraps, 1,600 mm H), 64 (19 wraps, 2,000 mm H) - Wrapping cycle time: approx. 36.3 s at H 1,600 mm, 15 wraps (conveyor excluded) - Pallet sizes: 800 x 1,200 mm and 800 x 600 mm, centred on the conveyor - Load height: 1,000 - 2,000 mm incl. pallet; mechanical max. 2,550 mm incl. pallet and conveyor - Load weight: 100 - 1,200 kg - Conveyor speed: 15 m/min - Machine height: 4,721 mm; hall height from 7,000 mm - Pre-stretch: PGSA carriage, electronically adjustable 100 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. dia. 250 mm, core 76 mm, max. weight 16 kg - Control: Siemens SIMATIC S7-1500 PLC, TP700 7" colour touch panel - Wrapping programs: 15, expandable to 64, 12 control steps per recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry and oil-free - Documentation and HMI languages: German / English / Italian Equipment - Rotating arm on a four-column steel structure, geared slewing ring with central lubrication - Patented PGSA pre-stretch carriage with load cell, film tension corrected at the corners, set from the display - Automatic film clamping, cutting and impulse-sealing unit, spring gripper with 300 mm horizontal stroke - Easy Lock tilting roller and roping device for narrowing the film web from below - Pantograph top press unit for load stabilisation during wrapping - Photocell for automatic pallet-height reading - Integrated roller conveyor, pallets loaded and unloaded by forklift - SEW IP55 geared motors for arm rotation and carriage lift, FESTO pneumatic components - Glazed enclosure with Sick M4000 light curtains, 30 mm resolution, 1,800 mm field height - Enlarged illuminated switch cabinet and a separate, independent operator panel - TPM package: centralised lubrication points, gauges with red/green rings, maintenance intervals on the display - Troubleshooting in the HMI with fault location and remedy - R-Connect remote connectivity with cloud portal for production data and teleservice - Documentation printed and on USB: manual, CE declaration, diagrams, spare parts catalogue, layout Condition Used - virtually new, dismantled and professionally packed for transport; photographs show it assembled before dismantling. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: CDE:D09C236, CORIS /HERMES 9600 Vial Blower & Filler Line, made in France. Consisting: Ledpjrtnlajfx Akljag - a bottle pack blowing machine, with 2 formats (60ml and 30ml), - a HERMES 2009 filling machine with 2 drive rings 10 slots, - a cap dispenser, - laminar flow, - spare parts, - belt conveyor 2200mm x 40mm, sold without peristaltic pump. YOM 2010 EXCELLENT CONDITION

Condition: excellent (used), Here we offer a GRIESER laboratory stand dissolver. Product: Grieser laboratory stand dissolver Type: GFD 11 LST Intended use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can extend from thin-bodied to pasty. Machine design: The laboratory stand dissolver essentially consists of the machine frame, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the chuck, and the control cabinet (non-Ex) with control and compact controller. In the working position, the container (provided by the customer) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed adjustment via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via the corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is done by switching on the lifting motor. This only runs as long as the push buttons (2-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains at any desired height. Lowering the mixing tool drive To lower the arm, the corresponding buttons (2-hand safety circuit DOWN-DOWN) on the control panel are pressed. Changing the mixing tool The mixing tool shaft is provided with an M8 connection thread. Depending on the requirements, the mixing tool (stirring star provided by the customer) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of manufacture: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) provided by the customer Lsdpozdtflsfx Akloag Mixing tool: stirring star, provided by the customer Operating panel / display The machine is operated primarily via the compact PLC controller "Vision 560-T25B". This excludes safety-relevant functions such as disconnecting from the mains by the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber. The operating panel consists of an illuminated LCD display and foil-covered tactile push buttons. The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. The individual menu screens can be scrolled through using the up and down arrow keys. Type: GFD 11 LST Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, Tetra Alfast Direct Inline standardisation system, designed for inline standardisation of milk and cream. Capacity: 25,000 l/h. Year of manufacture: 2014 Equipped with 2 density meters, 4 electromagnetic flowmeters, and 3 flow control valves for measuring and controlling the fat content in milk and cream. Laodpfswf Iq Ujx Aklog - Including original documentation. - Can be operated via Profibus central system - Can run stand-alone with SCADA system Sattline; we are currently working on integrating a control screen in the control panel to make stand-alone operation easier. - Excellent condition.

Condition: used, Year of construction: 2020, Overview Lsdpszzz N Hjfx Aklsag Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Condition: used, Year of construction: 2014, operating hours: 5,000 h, functionality: fully functional, overall weight: 3 kg, total length: 500 mm, total width: 500 mm, total height: 200 mm, input voltage: 24 V, input current: 4 A, type of input current: DC, for sell ̶1̶.̶F̶A̶N̶U̶C̶ ̶A̶1̶3̶B̶-̶0̶2̶0̶2̶-̶B̶0̶0̶2̶,̶ ̶1̶5̶i̶n̶c̶h̶ ̶p̶a̶n̶e̶l̶ 2. FANUC STAND ALONE Control Unit - A02B-0323-B804 with 4 options: A20B-8101-0742 (FSSB-3) A20B-8101-0050 (Master CN1) A20B-8101-0770 (ETHERNET CD38R) A20B-8101-0770 (ETHERNET CD38R) ----- 3.Keyboard for FANUC - A02B-0323-C231 Lsdpfewq Dpdsx Akleag you can buy separately

Condition: used, power: 175 kW (237.93 HP), next inspection (TÜV): 10/2026, Year of construction: 2010, operating hours: 11,658 h, Equipment: ABS, air conditioning, all wheel drive, cabin, front linkage, Mercedes-Benz Unimog U 400 4x4 | Jotha CombiCon | Schmidt Snowplow | Flatbed VIN: V225352 CHASSIS / COMPONENTS * 4x4 * Coil spring suspension * Wheelbase: 3,080 mm * ABS * Differential locks * Ringfeder trailer coupling * 2-line compressed air connection for air-braked trailers * Front mounting plate * Municipal hydraulics, front and rear * Electrical connections at the rear * Snow chains * Work lights * Rotating warning lights * 1 aluminum diesel tank * 1 AdBlue tank EXCHANGEABLE FLATBED * Separate exchangeable flatbed for the Jotha CombiCon system * Steel flatbed with aluminum side panels * Rear and side panels * Detachable front grille, mountable at the front on the loading area * Tie-down points in the loading floor * Support stands with rollers * Internal dimensions approx.: * Length: 2,427 mm * Width: 2,078 mm * Side panel height: 402 mm * Volume: approx. 2.03 m³ BODY * Jotha CombiCon 4520 U quick-change system * Year of body construction: 2010 * Lifting, lowering, tilting, and high-dumping function * Separate operation of the CombiCon system * Flatbed included * Schmidt snowplow KL-V 32 * Year of snowplow construction: 2006 TIRES * Axle 1: 365/80 R20 MPT 152K, remaining tread approx. 80 % / 80 % * Axle 2: 365/80 R20 MPT 152K, remaining tread approx. 80 % / 80 % ENGINE / TRANSMISSION * 175 kW (238 hp) * 6,374 cm³ displacement * Euro 5 * Telligent transmission, 3-pedal * Permanent all-wheel drive * Engine brake * Cruise control CAB / DRIVER'S CAB * Air conditioning * Heated windshield Lajdpfezq Ivljx Akleg * Rearview camera with monitor * CD radio * AUX and Bluetooth * Digital tachograph WEIGHTS * Permissible total weight: 12,500 kg * Tare weight: 6,640 kg * Payload: 5,860 kg OTHER * Mileage: 119,391 km * MOT: 10/2026 * Inspection: New MOT and weight adjustments are available upon request. We won't leave you alone even after the purchase: We will help you obtain export or short-term license plates. We can also arrange for the transport of your vehicle within Germany. Just contact us - we will be happy to help you! We speak German, English and Russian. All information is without guarantee. Subject to change, errors, printing and typesetting errors, and prior sale. About us: Leible Nutzfahrzeuge is a family-run company based in Kehl am Rhein. For many years, we have stood for experience, reliability, and competence in the field of refurbishment and sales of commercial vehicles. Our strength lies in the purchase and sale of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a wide range of applications. With us, not only the vehicle counts, but also the service behind it. Fairness, seriousness and customer satisfaction are our top priorities. That is why we accompany you personally and reliably - from the first contact to the delivery of your vehicle. Convince yourself. We look forward to your inquiry! Our service for you: Vehicle loading We will help you load your purchased vehicles. Special transport We will support you in the organization of special transports. Export and short-term license plates We will help you obtain export or short-term license plates. Customs formalities We will also be happy to assist you with customs matters. Vehicle transport On request, we will organize the transport of your vehicle.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 133/SCS, cutting speed: 35,000 mm/min, working width: 1,250 mm, feed rate X-axis: 35 m/min, product width (max.): 1,250 mm, number of straightening rollers: 7, We are offering a very well-maintained Krasser CENTURIO 1250 stand-alone slitting line, manufactured in 2023, for sale. Highlights Reinforced 7-roll leveling unit Max. coil width 1,250 mm Cutting speed up to 35 m/min Suitable for longitudinal and transverse cutting as well as leveling of strip steel Modern control system with touch operation Very well-maintained condition Ready for immediate use Technical data Manufacturer: Krasser Model: CENTURIO 1250 Type: Stand-alone slitting line Year of manufacture: 2023 Condition: Very good Max. coil width: 1,250 mm Min. coil width: 250 mm Description The Krasser CENTURIO 1250 is a powerful sheet metal cutting system for the precise processing of steel, stainless steel, aluminum, copper, and zinc sheets. The reinforced 7-roll leveling unit is particularly noteworthy, as it enables excellent leveling quality and reliable processing of a wide variety of materials. The system is currently still in operation and can therefore be inspected at any time by appointment while running. This offers interested parties the opportunity to directly verify the condition, performance, and functionality of the machine. The machine is expected to be available in the first quarter of 2027. The exact date may vary slightly depending on the project, but we currently anticipate a release around February 2027. Laodpfezvgbqox Akleg Early reservation or coordination of the delivery date is possible and desirable. Contact For further information, technical details, or to arrange a viewing appointment, we look forward to receiving your message or call. Category ID: 1052 Type ID: 136 Type: Slitting line

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 11598-A, overall weight: 3,900 kg, input frequency: 50 Hz, input voltage: 380 V, We are offering this used TAYME P-60 debarker, year of manufacture 2011. Technical Data – Debarker TAYME P-60 Peeling Machine (Year 2011) Manufacturer: TAYME S.A. Model: P-60 Machine type: Log debarker / Peeling machine Year of manufacture: 2011 Serial number: 11598-A Weight: 3,900 kg 1. Mechanical Specifications Tool type – Peeling heads with toothed knives Maximum pressure – 400 bar 2. Electrical Specifications Rated voltage – 380 V (three-phase) Frequency – 50 Hz Estimated power – approx. 25 kW 3. Hydraulic System Hydraulic flow rate – 22 l/min (according to nameplate) Maximum pressure – 400 bar System type – Stand-alone hydraulic unit with tank and three-phase motor 4. Main Function Industrial machine designed for: - Debarking logs of various diameters - Preparing wood for pallets, packaging, chipping, or primary processing - Peeling through toothed heads and hydraulic pressure Lajdpfsycutcsx Akleg The machine is located in Valencia, Spain, and is ready for loading and shipping worldwide. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2018, Lippelt 800 long roller station Year of manufacture: 2018 Ljdpfxoz A Sdzs Akloag Working width: 800 mm Pressure roller at the infeed, adjustable in height and laterally Working plate, adjustable With timing roller on the transfer belt (pneumatic) Flour spreader with electrically adjustable flour quantity, including 2 containers Pressure roller at the outfeed, adjustable in height and laterally Belt speed adjustable Machine can operate in stand-alone mode.

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 27 mm, Warehouse – No. 2875 1 used compounding and granulation line, partially overhauled in 2026 and functionally tested, consisting of: Brabender gravimetric 2-component dosing system (expandable, optional at extra cost) with 1x FlexWall 40, 1x DDW-MD5, Congrav RC4 stand-alone control Twin-screw extruder Leistritz type ZSE 27 HP Co-rotating, self-cleaning, segmented screws and cylinder with intensive cooling. Screws 2x Ø 27 mm - 36 L/D with 8 cylinder zones with 3 degassing zones, 1 vacuum pump 1.5 kW Screw speed up to 1,200 rpm - adjustable Extruder drive 33.8 kW - heating power 9.8 kW installed Melt pressure sensor Control system Macromatex III Laedpfx Aez A Sxloklog MAAG Gala underwater granulation system type LPU, model SLC 5, including: Polymer start-up valve with hydraulics Die plate 20°, granulator SLC 5 with 1.5 kW drive Water box – temperature-controlled water system with Granulate centrifugal dryer type 1150, 1.5 kW drive Xantec control system Siemens Accessories: Single tempering unit for the extruder processing section The system is ready for demonstration; a test run / sample production with your material is possible on short notice. Details and dates upon request. We have other compounding extruders available ex-works: Alphatec, Coperion, Leistritz, Berstorff-Krauss Maffei, as well as all accessories: granulation systems (BKG - MAAG gala, Sikoplast, IPS, Scheer, ...), melt filters (BKG, Ettlinger, Alphatec, ...). Commissioning / training for all our systems can be carried out by our technicians; details upon request.

Year of construction: 2024, condition: used, functionality: fully functional, The electric double fryer with a capacity of 14 + 14 liters and a cabinet base, model Z7FREH2E00, is an excellent choice for professional kitchens or markets. The unit features high performance and enables the simultaneous frying of large quantities of food. This double fryer is specifically designed for intensive use in catering establishments or high-traffic TO GO sales outlets. You will receive an invoice with VAT shown. Technical data: Dimensions in mm: external (W x D x H): 800 x 720 x 942 Tank (W x D x H): 240 x 380 x 285 Cabinet (W x D x H): 680 x 640 x 420 Model designation: Z7FREH2E00 Serial number: 4082149208 Performance data: Tank: 2 x 12-14 liters Connection value: Electric: 17.4 kW / 3N / 400 V Temperature specifications: Operating temperature: 105 to 185 °C Weight specifications: Gross weight: 83 kg, Net weight: 81 kg Year of manufacture: 2024 Condition: Used, fully functional (operated for 2 weeks) Equipment: Electric fryer as a stand-alone unit with 2 directly heated standard tanks, each with a capacity of 14 liters 1.5 mm thick front and top plate made of CNS, side and rear panels made of stainless steel, Scotch-Brite finish, edges rounded on both sides Standard tank with directly heated, internal heating elements Operating temperature from 105 - 185 °C, thermostatically adjustable Filling volumes: min / max: 12 / 14 l per tank Height-adjustable feet (+50 mm) Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs High-quality brand-name equipment at fair prices Professional overhaul / inspection & expert cleaning Tested & fully functional - or money back Shipping or self-collection can be flexibly selected Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have questions, would you like a consultation, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Lsdpfozvavzjx Aklsag The sale is made exclusively subject to our general terms and conditions (GTC).

Year of construction: 2021, condition: used, The Matho Cuttobag CB-100 is a compact, mobile cutting and extraction system for production waste such as edge trimmings and die-cut grids. It is designed as an all-in-one, stand-alone solution for production lines in the printing, label processing, packaging, and film extrusion industries. Laodpjzzkcpefx Aklsg The Cuttobag reduces downtime and minimizes the manual effort required for waste disposal, as the material is directly shredded and collected. The CB-100 bag version has an integrated big bag with a capacity of approximately 300 liters.

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, Professional Overlock Machine DURKOPP ADLER 669-180010 M-TYPE Lasdpfsz Dphysx Aklsg For sale: a professional, specialized single-needle, free-arm (cylindrical) sewing machine from the renowned German brand Dürkopp Adler, model 669-180010 from the exclusive M-TYPE series (ECO version). Manufactured in Europe (Czech Republic), guaranteeing the highest quality of workmanship. The machine is in very good visual and technical condition – well-maintained, clean, fully functional, and complete. 🌟 Key features and equipment: 🔄 Movable (synchronous) overlock attachment included: The machine features a professional mechanism where the overlock attachment moves in full synchronization with the needle feed. This guarantees perfect, even edge finishing with overlock without wrinkling or pulling the material – even on tight curves. The cost of such an attachment alone is a significant expense; here, you get it already installed on the machine! 📏 Stitch length up to 9 mm: A wide range of adjustment allows for ideal adaptation of the stitch density – from precise construction seams to long, aesthetic decorative stitches on the overlock. 👟 Adjustable presser foot stroke up to 9 mm: Manual, convenient adjustment of the presser foot height. This allows the machine to smoothly and without skipped stitches, overcome transverse seams, thickenings, and the joining of multiple layers of heavy materials. ↩️ Convenient manual reverse: A classic, ergonomically positioned lever for reverse sewing enables quick and reliable backstitching and securing the stitch manually, precisely at the desired moment. 📐 Narrow cylindrical arm (Ø 50 mm): A design created for processing three-dimensional elements and closed loops (bags, backpacks, footwear, filters, car side panels). It allows for free sewing where a standard flat sewing machine cannot access. Triple feed (bottom toothed, needle, and top presser foot): Powerful penetration force. The machine easily handles thick leather, synthetic leather, felt, and multi-layered technical materials. ECO version – Reliability and simplicity: The design is free of complicated electronics and pneumatics, eliminating the risk of costly failures of computer components. The machine is ideal for small and large workshops – you simply plug it into a standard 230V outlet and start working immediately (no need to connect a compressor). Energy-efficient motor with needle positioning: A modern drive that operates quietly and consumes minimal electricity. The positioning function ensures that the needle always stops in the selected position (e.g., always at the top or always embedded in the material). 🎁 Included: Dürkopp Adler 669 machine head Original, stable table and stand Installed, ready-to-use overlock attachment Spare bobbins We have several units of this model available. Price upon request. Delivery to the customer by courier is possible.

Condition: excellent (used), Year of construction: 2016, BAG-IN-BOX SEMI AUTO FILLING MACHINE Smurfit Kappa Vitop, ITALY, 2016 Bag filling volume from 1L to 28L Pouch-up filling volume from 1L to 3L Touch screen control panel The semi-automatic filling machine Vitop has been designed to fill liquid and semi-liquid products in bags and pouches. Improved shelf-life of liquid thanks to revolutionary filling valve that separates vacuum and nitrogen circuits Easy to operate and maintain Laedpfsyr Awbsx Akleg Precise electromagnetic flowmeter for filling accuracy Hygienic: Equipped with a cleaning a sanitizing program Suitable for Vitop® Original and Vitop® Compact Simple to adjust between sizes Optional laminar air flow for filling in ultra clean conditions Especially well-suited to medium and Pouch-Up® fillers, the semiautomatic filling machine Vitop offers excellent performances and reliability. The filler uncaps the tap, inhales air from the bag before filling, fills the bag/pouch with the required quantity of liquid and recaps the tap. Nitrogen is inflated at the end of the cycle in order to better preserve the product inside and help to clean the valve neck. An airflow hood (option) provides mechanical decontamination around the filling body area through overpressure.

Condition: used, Year of construction: 2009, Overview Complete PET line for sparkling mineral water and soft drinks. A SIDEL SBO 20 Universal Combi blows, fills and caps up to 30,000 bottles per hour in one block; Krones labelling, shrink packing and palletising complete the line down to the finished pallet. The Combi was built in 2005 and started production in 2006. The Combi stands in Belgium, the downstream machines in Germany. All machines are still installed and can be inspected by appointment. Technical data - Output: up to 30,000 bph (maximum filler speed), 28,000 bph in current production - Containers: 1.0 l, 1.25 l and 1.5 l PET bottles - Products: sparkling mineral water and flavoured sparkling water with high CO2 content - Neck finish: 26/22 GME 30.40 - Preforms processed: rPET Luxpet - Bottle formats: 1.0 l (82.5 mm diameter, 271 mm height) and 1.5 l (86 mm diameter, 326 mm height) - Blow moulds are not included Scope of Delivery - PET Blow Moulder | SIDEL | SBO 20 UNIVERSAL | 20 mould stations, linear oven with 24 heating modules, preform feeder, PCC drive, transfer to the filler | 2005 - Isobaric Filler | SIDEL Simonazzi | SELEC 515 FMG 120-15C | 120 filling valves, pitch 113 mm | 2005 - Capper | Zalkin | HYSTERESIS H6 | 15 heads, quick change of the chucks, cap type 26/22 | 2005 - Cap Feeder | SIDEL Gebo | For flap cap 28 and 26/22, 42,000 bph | 2005 - Carbo-Mixer | SIDEL | CARBO-L-D 580/60 | Double-stage deaeration including PFM inline flavour dosing 45 m³/h, max. 60,000 l/h | 2005 - Bottle Conveyor | Single-lane conveyor at the Combi exit - Container Conveyors | SYNCO S | Ground floor and platform level - Fill Level Inspection | Krones | CHECKMAT 731 FM-X+L | 2009 - Inkjet Coders | Domino | DDC 3 | Best-before date coding, two coders Laedpjz Dih Hefx Aklsg - Drying System | Europool | FM TF-02 - Labelling Machine | Krones | CONTIROLL HS 720-15 | Wrap-around labels from the reel | 2009 - Label Inspection | Krones | CHECKMAT 731 EM | 2009 - Tray and Shrink Wrapper | Krones | VARIOPAC PRO FS | 2009 - Tray Coding System | WOLF - Tray Transport System | MULTICO S - Palletiser | Krones | MODULPAL 1A | 2009 - Pallet Transport System | PALCO S Condition The Combi is in good working condition and in production; it is maintained annually by the in-house team and, where required, by SIDEL. Its driving panels and computer, electrical and mechanical drawings, manuals, spare parts books and all available spare and format parts are included. The equipment is sold as it stands and is to be dismantled. Availability The Combi runs until 27 November 2026; dismantling is planned for week 49/2026. The line is available from December 2026.

Condition: used, overall weight: 700 kg, Jagura 04SP tool grinding machine on a stand, with control panel (emergency stop and keypad), digital readout DRO-201, and cooling system. Technical specifications: - Digital readout: DRO-201 - Control panel with emergency stop and keypad - Design: stand-alone machine on a stand - Cooling system included - Weight: approx. 700 kg Ljdezzndqopfx Akleag The machine is sold in its current condition (used, from bankruptcy, Apeldoorn, Netherlands). Dismantling, loading, and transport are the responsibility of the buyer; the buyer is responsible for providing tools, lifting/loading equipment, and packaging. Inspection is possible by appointment.

Year of construction: 2022, condition: good (used), functionality: fully functional, REF: MM6470 Volumetric filling and sealing system for pre-made pouches (doypacks). Rotary Volumetric Filler mounted on stainless-steel frame with 1 x Pre-made pouch (doypack) filling and sealing machine. Manufacturer - Qinyao/Top Y Machinery. Date of manufacture - 2022. Setup of volumetric filling system: Stainless-steel large infeed hopper over Rotary volumetric cup filler (freestanding) with nylon volumetric cups. Setup of pre-made pouch fill and seal machine: Twin-lane bag magazine (lanes 1# and 2#), vacuum pick-up and bag opening (1#Sucking, 2#Sucking, Pick Up Bag, Open Bag), front and back sealing jaws with sponge-faced grippers, Siemens Smart Line HMI, Omron controllers for front jaw, back jaw and printer, thermal transfer ribbon coder and discharge chute. Speed – variable up to 20 packs / minute, depending on fill volume. Lajdszp E T Sepfx Aklsg Pack size range – can handle doypacks up to 300mm long x 250mm wide. Controls – Siemens Smart Line HMI touch-screen control with easy-to-use programme settings. Tooling – 1 x Set of volumetric cups, previously used to pack whey protein products (1000g volume), dried fruit (200g volume) and other dry ingredients (depends depending on product). Supplied with a fill head attachment for plastic scoops as the material is deposited. Electrical requirements - 3 phase. Requires compressed air supply. Condition – Very good, likely has a total use of one year production. *Please note* - the pre-made pouch (doypack) filler and sealer has previously been used / fed by a linear weigher and a multi-head weigher depending on what the products being packed were.

Condition: ready for operation (used), Year of construction: 2019, HEUFT ONE: Metal Detection and Code Verification Conveyor System Model Heuft HBBNXZ72 YOM 2019 High sensitivity to ferrous and non-ferrous metals Stainless Steel Construction Full Container Checking System (A4) The devices of the new HEUFT ONE series set new standards in terms of detection accuracy, operational reliability and price / performance ratio during an in-line quality inspection in a confined space, and celebrated their world premiere at interpack. The first metal detector and an inspection system for markings up to HEUFT standards can be experienced live at the trade fair. ONE for all: the new products make an affordable introduction to HEUFT cutting edge technology as particularly compact stand-alone devices which are extremely easy to integrate into packaging lines. They combine innovative detection technologies with customised hardware and software and proven procedures for a highly precise product tracking, inspection and fault rejection. Thus the compact complete solutions remove contaminated products and incorrectly marked packaging accurately; food safety has priority! The HEUFT ONE for detecting metal achieves maximum detection accuracy with unique evaluation procedures from the HEUFT development department: it even finds minute pieces of metal in filled food packaging reliably – almost unaffected by the product effect of saline or acidic products and the influence of metal packaging components. Even special ambient conditions such as a "metal free zone" are not necessary for the reliable operation of the compact stand-alone device. The first HEUFT metal detector complements the portfolio of sophisticated systems, which identify all types of foreign objects, with a slim entry-level solution. It is ideal for all those who only wish to find objects made of iron, steel, aluminium or stainless steel first and want to achieve a detection and rejection reliability up to HEUFT standards. The new HEUFT ONE for code verification, marking and dress inspection also provides this during the high-resolution complete examination of food packaging with in-house developed colour sensor camera technology and real-time image evaluation. It detects best before and expiry dates, barcodes and 2D codes, article and serial numbers, imprints and lettering which have been incorrectly applied and are inaccurate as regards content – and that independent of their respective position. The same also applies to deviating logos as well as non-brand colouring and design elements. Proven HEUFT procedures also ensure the accurate removal of incorrectly marked products in this case. Full traceability, clear information about shelf-life and digestibility as well as an attractive appearance at the point of sale are thus always guaranteed. The solid, extremely compact construction in accordance with the hygiene-optimised HEUFT CleanDesign also makes the new HEUFT ONE devices stand out. They are straightforward to integrate into existing packaging lines even where space is limited. The HEUFT ISI bus ensures minimum wiring with the open, flexible assembly directly above the conveyor. Dispensing with change parts makes easy brand changes without mechanical changeovers possible and the organised user interface, which has been reduced to the essentials, ensures error-free operation. This together with continuous monitoring brings the metal detection and code verification in line with HEUFT standards. Laedpfxoyq Rkys Aklsg

Condition: good (used), mileage: 804,712 km, power: 345 kW (469.07 HP), first registration: 10/2018, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,000 mm, total width: 2,550 mm, total height: 3,670 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, retarder, seat heater, traction control, = Additional Options and Accessories = - 2nd Diesel Tank - Heated Mirrors - Digital Tachograph - Driver's Log (Recording Device) - Fixed - Halogen Lamp - Manual - Radio/Cassette - Sleeper Cab - Lane Keeping Assist - Fabric - Auxiliary Braking System = Notes = Number of axles: 2, Configuration: 4x2, Tare weight: 7850 kg, Gross vehicle weight: 20500 kg, Total tank capacity: 960 liters, 2nd Diesel Tank, Height of fifth wheel coupling: 119 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Suspension type: Air suspension, Type of cab: Sleeper cab, Cruise control, Driver's log (recording device), Digital tachograph, Air conditioning, Stand-alone air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/Cassette, Color: White, Heated mirrors, Type of lighting: Halogen lamp, Lane keeping assist, Climate control, Seat heating, Bluetooth, Engine power: 345 kW (463 Hp), Fuel: Diesel, Euro: 6, Transmission type: Automatic, Transmission type: Volvo, Gears: 12, Auxiliary braking system, Retarder brand: Voith, Power steering, ABS, ASR, Seat configuration: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Spare wheel = Further Information = Transmission Transmission: VOL, 12 gears, Automatic Axle Configuration Tire size: 315/70R22,5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 4 mm; Tire tread depth right: 4 mm; Suspension: Leaf spring suspension Axle 2: Double tires; Tire tread depth left inner: 7 mm; Tire tread depth left outer: 6 mm; Tire tread depth right inner: 4 mm; Tire tread depth right outer: 4 mm; Suspension: Air suspension Weights Unladen weight: 7,850 kg Payload: 12,650 kg GVW: 20,500 kg Maintenance MOT (Periodic Technical Inspection): valid until 04.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 3 Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) registration can be arranged quickly • Expert technical services • The assurance of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Lajdpszyx U Rofx Akleg Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and send an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, machine/vehicle number: MT 1605, Clarkson Mark II tool and cutter grinder (Clarkson International Tools Ltd, Nuneaton, England). Stand-alone universal tool grinding machine with worktable, dust extraction hose, and machine lighting. Technical specifications: - Capacity: 12" x 6" (305 x 150 mm) - Serial number: MT 1605 - Design: stand-alone machine with worktable - Equipped with dust extraction hose and machine lighting - Connection: 400 V Laedpfx Akjzzmtwelog The machine is sold in its current condition (used, from a bankruptcy sale, Apeldoorn, Netherlands). Dismantling, loading, and transport are the responsibility of the buyer; the buyer is responsible for providing tools, lifting/loading equipment, and packaging. Inspection is possible by appointment.

Condition: used, Year of construction: 2005, Overview This SIDEL SBO 20 Universal Combi blows, fills and caps PET bottles in one integrated block. The system was manufactured in 2005 and started production in 2006. It is designed for sparkling mineral water and flavoured sparkling mineral water with high CO2 content in 1.0 l, 1.25 l and 1.5 l PET bottles. A HEUFT Spectrum TX 180 fill-level and cap-presence inspector and a single-lane bottle conveyor complete the scope. The machines are still installed and under power and can be inspected by appointment. Technical data - Current capacity: 28,000 bph in 1.0 l, 1.25 l and 1.5 l PET - Maximum filler speed: 30,000 bph - Application: blowing, filling and capping of PET bottles - Products: sparkling mineral water and flavoured sparkling mineral water with high CO2 content - Neck finish: 26/22 GME 30.40 - Preforms processed: rPET Luxpet Lasdpfxoz A Am To Akljg - Bottle formats: 1.0 l (82.5 mm diameter, 271 mm height) and 1.5 l (86 mm diameter, 326 mm height) - Moulds are not included in the scope of supply Scope of Delivery - PET Blow Moulder | SIDEL | SBO 20 UNIVERSAL | 20 mould stations, quick change for shell moulds | 2005 - Oven | SIDEL | UNIVERSAL | Linear oven with Olicorp, 24 heating modules | 2005 - Blowing Wheel | SIDEL | For 20 moulds, PCC drive, Siemens CE electrical cabinet | 2005 - Transfer Device | SIDEL | Between blow moulder and filler | 2005 - Isobaric Filler | SIDEL Simonazzi | SELEC 515 FMG 120-15C | 120 filling valves, pitch 113 mm, max. 30,000 bph | 2005 - Capper | Zalkin | HYSTERESIS H6 | 15 heads, quick change of the chucks, cap type 26/22 | 2005 - Cap Feeder | SIDEL Gebo | For flap cap 28 and 26/22, tilting device to the capper chute, 42,000 bph | 2005 - Bottle Conveyor | Single-lane conveyor at the combi exit, length to be discussed - Fill Level and Cap Inspection | HEUFT | SPECTRUM TX 180 HBBVXTI60 | Fill level and cap presence control | 2006 - Spare and Format Parts | All available spare parts and specific format parts included Condition Good working condition, still installed and under power. Preventive and corrective maintenance is carried out annually by the in-house maintenance team and, where required, by SIDEL. Driving panels and computer, the electrical and mechanical drawings, service and maintenance manuals and the spare parts books are part of the supply. The equipment is sold as it stands and is to be dismantled. Availability In production until 27 November 2026. Dismantling is planned for week 49/2026, craning out and loading from the beginning of December 2026.