Used Single Sided Laminator for sale (26,184)

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg Ledpsg Ezarsfx Amroac *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h Ljdpfeg Ewwrjx Amreac -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: ready for operation (used), 9 kW, 150 degrees Celsius Lajdjzab A Eopfx Amrjc Two units in stock Warranty: 6 months

Condition: used, functionality: fully functional, Single Temperiertechnik STW 1-6-30-M4 Temperature Controller. 4 for sale. 1 piece/300 EUR. Lasdpswf Anhefx Amrjc Good working condition. Please check out our other listings as well.

Condition: good (used), Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller -Manufacturer: single, temperature controller Digitemp Q -Type: TQD 3110 D Lodpfx Aoudqbiemreac -Measuring range: 0 to 399 °C -Dimensions box: 220/130/H135 mm -Weight: 0.8 kg

Condition: excellent (used), Year of construction: 1994, 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm. Lodpol Dw Nxefx Amrsac

Condition: good (used), Year of construction: 2016, power: 18 kW (24.47 HP), Single Advanced Oil D2-180-18-0 – Oil Temperature Control Unit Manufacturer: Single Temperiertechnik GmbH Model: Advanced Oil D2-180-18-0 Year of manufacture: 2016 Heating capacity: 18 kW Specific heating output: 23.2 kVA Rated current: 32 A Supply voltage: 3×400 V / N / PE Frequency: 50 Hz Max. temperature: 180°C Max. operating pressure: 3.1 bar Safety valve: 6.0 bar Medium: heat transfer oil Lajdpjyrnciefx Amrec Max. external filling quantity: 22 litres Net weight: 169 kg Dimensions: standard design (according to unit type) Application: temperature control for industrial processes, tooling, plant modules Location: Schierling

Year of construction: 2017, condition: good (used), Single Compact K-160-9-24 160° C medium Water 11 KW Ledorupr Depfx Amreac year 2017 price: 4.950 € contact: Mr. Rainer Eckerle

Year of construction: 2013, condition: like new (used), functionality: unexamined, machine/vehicle number: 130365 bis 130368, The heating units were acquired as part of a package in conjunction with a machine takeover from VW/Dieffenbacher and are not required. It is assumed they have very few operating hours (previously used in a laboratory setting). Lasdpfx Amox An Eqorec

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Ledei Apuhepfx Amrjac Technical data: - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed

Condition: good (used), Year of construction: 1998, Tire repair machine Make: Single Type: STW 1-6-25-ZN Ljdpfxsfcy Dro Amroac Year of manufacture: approx. 1998

Condition: new, functionality: fully functional, empty load weight: 1,640 kg, lifting power: 1,500 kg/m, lifting height: 9,500 mm, Year of construction: 2026, New Mobile Crane SINGLE LIFT CMC 1500 – BRAND NEW Glasslift is an authorized distributor of BG LIFT, UNIC, and SINGLE LIFT mini cranes, SCHMALZ and RIGHETTI vacuum lifters, SMARTLIFT manipulators, PAUS roofing cranes, and CELA Spyder-type aerial platforms. We are also part of the GGR GROUP and have introduced our own line of GLW transport carts. Thanks to our extensive range of equipment, we select machinery tailored to the specific requirements of each job, offering machines that fulfil our clients’ needs. At Glasslift, we not only execute projects but also supply the tools necessary for their efficient implementation. In addition to sales, we also offer short- and long-term rentals of the above-mentioned equipment. Glasslift is a team of professional operators specializing in comprehensive glass installation, steel handling, and manipulation of structural components. Our team of experienced professionals has an excellent understanding of their areas of expertise, is highly qualified, and each of our operators is fully committed to the projects entrusted to them. We possess the required skills, technical know-how, and professional qualifications, so you can trust us with confidence. Our capabilities are backed by positive references, testimonials, and publications about our company, which underline our reliability and professionalism. Cooperate with the best to ensure comprehensive and effective project execution. For sale: BRAND NEW Single Lift Cramic CMC 1500 mini crane with Pick and Carry function. By purchasing from the exclusive distributor, you are assured of machine quality, spare parts availability, and service support. Basic information: • Jib reach with searcher hook (8.20 m) and with hydraulic jib (9.5 m) • Maximum lifting capacity: 1,500 kg • Own weight: 1,640 kg • The first mini-crane of this size with an articulated jib (JIB) • Transport dimensions: 239.1 cm (length), 167 cm (height), and 85.9 cm (width) • 360-degree boom rotation • Four extendable (vertical) outriggers for stabilization on difficult terrain • Possibility to mount a suction beam with a 600 kg, 800 kg, or 1,200 kg lifting capacity, or for bent glass up to 800 kg • Extendable tracks allowing safe operation on the most challenging terrain - passage width: 84.9 cm, maximum width with extended tracks: 152.5 cm • Option to mount a personnel basket with a 300 kg load capacity • Battery power for outdoor operation, as well as both battery and 220V mains power for indoor use • Manipulator options: manual slew and tilt, automatic slew with manual tilt, or fully automatic slew and tilt Machine import included in the price. Laedpfxoyhprdj Amroc Please contact us by phone for an individual price quotation for any configuration. Availability of genuine spare parts directly from the manufacturer. Service centre located in the heart of Poland at the A1 and A2 motorway junction near Łódź, at the GLASSLIFT SP. Z O.O. equipment base. VAT invoice available.

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, Lamina System Fully automatic laminator FA 1416. Machine with no mileage, in very good technical condition, after total renovation. Machine in motion. It laminates both closed and open cardboard. Max. sheet size: width: 1400 mm length: 1600 mm Lodorit H Rspfx Amrsac Ppsbqkzsrit H Roa I Ssu Min. sheet size: width: 200 mm length: 350 mm Top sheet: 130 - 450 gm / m2; Bottom sheet: from 250 g / m2, thickness: 0.6 - 10 mm Automatic substrate feeder with continuous sheet feeding Automatic top sheet feeder The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 3.7 m, length - 10.5 m, height 2.9 m Fitting accuracy

Condition: reconditioned (used), functionality: fully functional, Lamina System Semi automatic laminator SA 1416. In very good technical condition, after total renovation. Machine on power, can be tested. Max. sheet size: width: 1400 mm length: 1600 mm Lajdjwz Ev Tspfx Amrjc Min. sheet size: width: 200 mm length: 350 mm Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Automatic substrate feeder with continuous sheet feeding The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 2350 mm, length - 4600 mm.

Condition: reconditioned (used), functionality: fully functional, The Lamina FA Blackline 1620BL is a highly accurate, high speed sheet-to-sheet fully automatic laminating/mounting machine. The machine can handle most of the existing materials in the market. The modular construction allows easy upgrading and maintainance resulting in a machine that lasts for many years. Max. sheet size: width: 1600 mm length: 2000 mm Min. sheet size: width: 350 mm length: 350 mm Feeder Capacity: Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 Ljdpsw Hrrrefx Amrjac corrugated from 0,6 - 10 mm (0,016” - 0,39”) Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Can be additionally equipped with Optional Laminating Machine PB 1600 Pressure Belt

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: Laodpfx Asq Nfuzomrsc - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: new, power: 250 kW (339.91 HP), Year of construction: 2025, The Multiple Cylinder Hydraulic Cone Crusher is an advanced type of cone crusher designed to provide higher productivity and better crushing performance than traditional single-cylinder cone crushers. Here are some key features and information about multiple cylinder hydraulic cone crushers: 1. Structure and Working Principle: - Multiple cylinder hydraulic cone crushers typically have three or more cylinders. - The crushing chamber is formed between the mantle (outer fixed cone) and the concave (inner moving cone). - The cylinders control the movement of the inner cone, providing a highly efficient and uniform crushing process. 2. Hydraulic System: - Each cylinder is equipped with its hydraulic system, allowing for independent control of the crushing chamber. - The hydraulic system is used for adjusting the discharge opening size, controlling the tramp iron release, and providing overload protection. 3. Adjustable Discharge Opening: - The discharge opening can be easily adjusted to control the size of the crushed product. 4. Automation and Control System: - Multiple cylinder hydraulic cone crushers often feature advanced automation and control systems. Laedpfx Ajq Nd Rbemrjc - These systems can include programmable logic controllers (PLCs) and human-machine interfaces (HMIs) for convenient operation and monitoring. 5. Application: - Multiple cylinder hydraulic cone crushers are suitable for crushing hard and medium-hard materials in industries such as mining, metallurgy, building materials, and road construction. - They are particularly effective for crushing materials with high hardness and abrasive index. 6. Advantages: - Higher crushing efficiency and throughput compared to single-cylinder cone crushers. - Better shape of the crushed product due to the uniform crushing action. - Improved reliability and maintenance convenience. - Enhanced safety features with the hydraulic system providing overload protection. 7. Disadvantages: - Potentially higher initial cost compared to single-cylinder cone crushers. - May require more complex maintenance and repairs. 8. Models and Specifications: - Multiple cylinder hydraulic cone crushers come in various models, such as HPT series, HP series, and others, each with different specifications. 9. Manufacturers: - Various manufacturers produce multiple cylinder hydraulic cone crushers. Well-known manufacturers often provide reliable and high-quality equipment. When considering a multiple cylinder hydraulic cone crusher, it's essential to assess your specific needs, compare features of different models, and consider factors such as capacity, feed size, and required end product specifications. Additionally, check the reputation and customer feedback regarding the manufacturer and model you are interested in.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P1065-22-A-01, controller model: Siemens SPS S7, wall material: stainless steel, cooling capacity: 180 kW (244.73 HP), nominal flow rate: 16,500 m³/h, product height (max.): 150 mm, Due to a rescheduling of a site visit, the auction end date has been postponed to Thursday, June 25, 2026! The new price of the machine was €650,000! TECHNICAL DETAILS Lajdpfezardtex Amrsc Capacity (for rolls weighing approximately 60g): 10,000 - 15,000 pieces/hour Layout: 180° layout Levels: 17.5 Free product height: approx. 150 mm Level spacing: approx. 216 mm Total cooling capacity: approx. 180 kW Total power consumption: approx. 70 kW Power connection: 400 / 230 V, 3-phase, 50 Hz Refrigerant: R717 Refrigerant supply: NH3 pump system Ambient temperature: above 10 °C Belt system Belt guidance: from bottom to top Infeed height: approx. 8,500 mm / 500 mm outside the cell wall Outfeed height: approx. 4,728 mm / 400 mm outside the cell wall Belt type: Stainless steel wire belt with side edges on both sides Belt mesh: 12.7 x 27.43 mm Wire thickness: 1.4 mm Belt width: approx. 762 mm Usable belt width: approx. 700 mm Usable belt length: approx. 300 m Belt length including infeed and outfeed: approx. 320 m Housing Housing length: approx. 8,700 mm Housing width: approx. 6,920 mm Housing height: approx. 5,200 mm Insulation thickness: approx. 140 mm Plastic elements: approx. 2,600 mm Width of operator walkway: approx. 1,500 mm Evaporators Number of evaporators: 4 units Evaporator capacity: approx. 60 kW each Air flow: vertically drawing, 45° upwards Air temperature: approx. -32 °C Evaporation temperature: approx. -40 °C Defrosting: manually with air or hot gas Evaporator surface area: 311 m² each Air volume: 16,500 m³/h each Fans: 4 units per evaporator Fan power: approx. 7.5 kW Air ring heater: 4 x 0.72 kW Defrosting interval: sequential Heater in the pan: hot gas Control and switch cabinet Control system: Siemens PLC S7 CPU: 1512SP-PN Touchscreen: 12" Operating panel: TP-1200 Comfort Panel Interface to the refrigeration unit: 0 - 10 V Main drive: 1 x approx. 2.2 kW Overdrive: approx. 1.1 kW Switch cabinet: stainless steel on a stainless steel frame Temperature display: min. 1x per day Operating hour counter: available Belt cleaning: freely programmable Alarm light: optical, green / yellow / red Construction Material: Stainless steel 1.4301 Conveyor belt: Stainless steel, 762 mm Side guide for conveyor belt: approx. 25 mm Number of outlets: 2 units Product guides: 2 units EQUIPMENT Stainless steel construction Insulated housing with 140 mm insulation thickness Stainless steel belt with side edges on both sides Belt path from bottom to top Internal arrangement of the single-tower spiral Infeed at the bottom Outfeed at the top Hygienic design Food-grade plastics Easy-to-maintain accessibility SEW main drive with Danfoss frequency converter SEW overdrive with Danfoss frequency converter Motors in energy efficiency class IE3 Siemens PLC S7 with CPU 1512SP-PN TP-1200 Comfort Panel Touchscreen display Variable belt speed Operating hour counter Fault reporting system with traffic light and signal horn Emergency stop switch and safety sensors Height and belt control on each level Stainless steel cabinet on stainless steel frame Freezer LED lighting controlled via the touch panel Welded stainless steel base pan with slope and drainage Under-freezing protection heater with a reserve circuit Floor temperature sensor with reserve sensor 4 separate evaporator units, each with one fan Evaporator pipes made of stainless steel Evaporator housing made of stainless steel Evaporator pans made of stainless steel Hot gas defrosting made of stainless steel in the unit Sequent

Condition: ready for operation (used), Year of construction: 2024, feed rate X-axis: 5 m/min, The machine has already been dismantled and stored. TECHNICAL DETAILS Adjustable speed: up to 5 m/min Roller pressure: pneumatic Adjustable temperature EQUIPMENT Manual system Swiveling, patented control panel Lajdpfozb Ip Iex Amroc Monochrome display Automatic sheet separation Anti-curl technology Compact design Faster Foiling KIT Ultra-quiet compressor Console on wheels IVIVID Matrix Omni-Flow Feeder 380 High-stack feeder LC display Adjustable front air flow Central suction belt Note: Accessories are without guarantee. The principle applies: “Item purchased as seen.” The prospective buyer must verify the completeness of the item on site.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: JUN4607, Year of construction: 2006, operating hours: 8,835 h, load capacity: 6,000 kg, lifting height: 4,000 mm, fuel type: diesel, empty load weight: 9,160 kg, TECHNICAL DETAILS Load capacity: 6,000 kg Lifting height: 4,000 mm MACHINE DETAILS Unladen weight: 9,160 kg Fuel type: Diesel Engine power: 61.5 kW at 2,200 rpm Lodpfezdqv Isx Amrsac Operating hours: 8,835 h

Condition: excellent (used), Year of construction: 2011, Ref: 11100 . 2011 Duplo DPB-500 EVA Perfect Binder Excellent condition! Only 40,000 books on the counter! Single clamp solo binder designed for the digital book-on-demand market with operation by one person. Features: • EVA spine glue unit • Programmable pre-melter • Computerised set-up with icon based touch-screen • Automatic setting of clamp book thickness and cover scoring • Double/Out of cover detector • Light beam score positioning • Milling & roughing unit with dust bag extraction Ljdpoy Nzclofx Amreac • Internal vertical stacking tray delivery Specification: Book thickness: Min 1mm / Max 51mm + cover thickness Book size (spine × fore-edge): Max 360mm × 320mm Min 120 × 120mm Cover size: Max 360 × 696mm / Min 120 × 250mm Cover weight: 80-302gsm Cover Pile height: 70mm Mechanical speed: Max: 525 /hour

Condition: used, Used concentration / evaporation system previously used to separate water from surfactant. Capacity for this process was approximately 8-12 m3/day of water/surfactant mix. System was built by Ecotecno during 2011/2012 and was shut down in April 2022. Process Description Laodpfx Amezcwitsroc The concentration unit was used from 2012 to 2022 to distil wastewater to a solid content of around 40%. Based on owner's experience, the flow rate was between 8 m³ and 12 m³ per day. The unit consists of a distillation vessel (S101) operated under vacuum, with a pipe heat exchanger (E101) functioning as the condenser, through which the wastewater is pumped by the circulation pump (P102). The pipe heat exchanger heats the wastewater for distillation. The concentrated wastewater can later be removed from the system by pump (P103). Vapors enter the plate heat exchanger (E102) and enter the accumulator (S103) as condensed liquid, this is removed from the unit. The non-condensed vapor passes through the vacuum pump (P101) and enters the vacuum pump vessel (S102), where it is cooled with an internal spiral. System can be described as a single effect vacuum evaporator with condenser. Includes flash reservoir in vacuum, distillate tank, vacuum tank, plate heat exchanger. Full documentation for equipment available.

Condition: excellent (used), Year of construction: 2009, Year 2009 VOORTMAN V600 CNC SINGLE SPINDLE DRILLING MACHINE with 5 station automatic tool changer. 18 metres length, drilling capability 16.3 metres. Profile Capacity 35mm -1050mm. Lajdpfew D Uqfex Amrjc Drill capacity 8mm-40mm.

Year of construction: 2010, condition: good (used), Main Technical Specifications Profiles to be processed • Max. section volume mm 1100 x 1100 • Bar length max. metres 12 Drilling Capacity • Drill heads no. 1 • Spindles per vertical drill head no. 1 • Drilling diameter max. mm 31.75 • Drilling diameter (with reduced feed) max. mm 40 • Power per head (a.c.) kW 5,5 • Program controlled spindle rotation speed with continuous variation RPM 180 - 1000 Other Specifications Lasdpfx Aeig T Axemrsc • X axis positioning speed (portal) mt/min. 20 • Y axis positioning speed (drill head) mt/min. 4

Year of construction: 2007, condition: good (used), ■ V600 Drilling machine (moveable drilling cabinet, executed with 1 horizontal drilling unit and automatic tool changer) ■ Drilling table with power rail length 15 metres, effective length 12 metres Lsdpfjq Hgg Uex Amrjac ■ Hardware and software (includes VACON 110 machine control) ■ Safety devices (safety bumpers) ■ Year of construction 2007