Used Silencer for sale (100)

Condition: good (used), functionality: fully functional, power: 209 kW (284.16 HP), gearing type: automatic, fuel type: diesel, operation weight: 30,000 kg, maximum load weight: 11,000 kg, Year of construction: 2012, operating hours: 4,397 h, Equipment: air conditioning, all wheel drive, cabin, soot filter, Steering: Articulated steering with hydraulic power steering Steering angle: ± 40° Fuel tank capacity: 540 l Hydraulic tank capacity: 550 l Tyre size front/rear: 18.00 - 25 Axle load front/rear loaded: 29,400 / 11,600 kg Lhjdpeytpxhofx Al Ieh Max. tractive force: 248 kN Engine: Cummins QSL9 Max. power: 209 kW/2000 rpm Max. permitted cross slope: 15% Max. permitted gradient: 28% Turning radius outer/inner: 6,713 / 3,547 mm Bucket capacity (SAE, heaped): 5.4 m³ Maximum speed loaded forward / reverse on level ground: 25.0 km/h Exhaust system: Silencer / Catalytic converter Main dimensions: 9,715 x 2,600 x 2,450 mm (LxWxH) Axle load front/rear unloaded: 13,100 / 16,900 kg Operating weight: 30,000 kg Payload: 11,000 kg

Condition: used, functionality: fully functional, type of input current: three-phase, filter area: 150 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, self-cleaning cartridge filter, pneumatic and vacuum-operated, suitable for plasma cutting, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high device efficiency. The fan is located on the clean air side, which reduces explosion risk to a minimum. Lhsdpfx Aley H Hkvj Ieh Brand: Plymovent / Euromate Model: SCS Cartridge filter elements – 2 pcs Filtration area: 150 m² Fan enclosed in a soundproof casing with noise silencer, power 7.5 kW. Fan model: CHB16LG03 Capacity up to 9,000 m³/h Inlet diameter: 400 mm Filtration efficiency: 99.8%

Year of construction: 1995, condition: good (used), Radial fan from Venti Oelde with inlet silencer. !! Performance curve included as an image!! Volume flow: 46308 m³/h Lhjdpfxed Nqlcj Al Ish Pressure increase: 4830 Pa / 48.3 mbar Weight: 2750 kg Temperature: 30°C Speed: 1480 rpm Motor: VEM 415 S4 Power: 110 kW

Condition: new, Year of construction: 2023, functionality: fully functional, power: 70 kW (95.17 HP), 3 SPANNER Wood Power Plant HKA70 Wood Power Plant HKA70 consisting of: CHP unit with 68 kW electrical output, Type 70-7.4-V2.0: incl. synchronous generator, exhaust gas heat exchanger, silencer Wood gasifier, Type HV70-V2.0: incl. magnet for metal separation in sluice area, reformer, gas cooler section, Wood gas filter Remote maintenance and remote start module, CO warning system Control cabinet and connecting cables 3 x Mixed flow cooler HKA70 3 x Spare parts package HKA70 3 x Preheating HKA 3 x Sensor for heat-led interval operation 1 x Service flare 3 x Connection kit flare 1 x External VPN router 1 x Oil change device 1 x Heat exchanger cleaning device Lsdpfxjy Ayhyo Al Ijhh 1 x Mobile CO measuring device 1 x Pressure measuring device 1 x Fan 3 x Slanted residue discharge 3 x Failure head for residue discharge 3 x Connection conveyor channel – steel box 6 x Steel ash box 800 liters

Condition: used, Offered: Universal Exhaust Silencer. Suitable for various brands. Overall length: 689 mm, diameter: 256 mm, 2x pipe: 102 mm. M100048 A P PARTS 3669 AG CHEM EQUIPMENT WR37235 AGCO WR37235 AMERICAN AUGERS 48BM5123 AP EXHAUST PRODUCTS INC 3669 APE INDUSTRI AB 3669 ARDCO ENE0004 ASTEC UNDERGROUND 306245207 BADGER 78103131 BARBER-GREENE 29H77 CASE/CASE IH S505881 CENTURY II 27Q334 CHARDONNET 7410004800 CHRYSLER 2907822 CLARK 1513792 CRANE CARRIER 21042 CUB CADET 549472C1 DART MTM100048 DITCH WITCH 196332A DRESSER 101877 DROTT 505881 EAGLE TRUCK PRODUCTS E206 FMC 2236408 FORD D3HS5230GA GALION D101877 GEHL 41889 GINAF OG0000017213 GROVE 7642000009 HEAVY DUTY MFG 30015 INGERSOLL RAND 90600424 INSLEY 520340 INTERNATIONAL DCM100048 JLG 3220049 KOEHRING 125656 KOMATSU 101877 LOESING 22038 MANITOWOC 7642000009 MI-JACK 33170033 MINNPAR M6002355 NELSON 86168M NEOPART GH0201001 NEOPLAN EH0201001 P & H 27Q334 PACCAR 0561649 PETTIBONE 0RO23180090 RIKER 10024 SANDVIK 04710300 SICARD 00561649 STEMCO 1909887 SULLIVAN PALATEK TAMROCK 4710300 TEREX 125672 TOWMOTOR 680401 VERMEER 283389001 VOLVO G695424 WALGAHN-MOTORENTECHN 00810325 WALKER MANUFACTURING 21833 WHITE 027076545 = Further information = Condition: Used Ledpfx Aleuuqhxs Iohh Part suitable for: Ginaf Reference number: M100048 / OG0000017213

Condition: used, mileage: 671,300 km, power: 375 kW (509.86 HP), first registration: 04/2017, fuel type: diesel, empty load weight: 8,042 kg, overall weight: 18,000 kg, tire size: 385/65 R22,5 - 315/80 R22,5, axle configuration: 2 axles, wheelbase: 3,800 mm, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, additional headlights, air conditioning, compressor, cruise control, differential lock, low noise, navigation system, onboard computer, parking heater, traction control, Urea tank (AdBlue) Displacement 12,902 ccm Hydraulics (power take-off) Lane assistant Distance warning system EBS ESP Light alloy rims Auxiliary air conditioning Payload 9,958 kg Ljdpfer Uhqmjx Al Iehh Leaf-air suspension Automatic air conditioning Compressor RTI PULS SILENCER 550 Type CMAX 3 Sun visor Light bar All-round lights Air horns 2 sunbeds cool box Euro 6 C Errors excepted

Condition: new, table width 3000 mm table length 1500 mm burner heads 1 Control CNC feed 20.000 mm/min total power requirement 15 kVA dimensions of the machine ca. 4,5 x 2,5 m * Heavy machine bed with precision guides for quiet movement machine * A ball bearing cross carriage for height adjustment with 400mm vertical Hub * Thermal separation of the drive and cutting areas ensures the highest precision * Automatic height finding and torch height control during cutting * Torch holder with collision protection and automatic shutdown in the event of a collision * Installation or implementation of the machine using the plug & play method with a forklift, Ant or crane possible * 3-sided accessibility to cutting area through boom design SATOTEC suction table: The SATOTEC table system is characterized by a stable table construction max. cutting thickness of 150 mm. For cutting a workpiece thickness of 150 mm, oxyfuel cutting technology is required. The workpiece support frame has interchangeable ones placed at a 45° angle and 3 mm thick flat iron slats. The distance between the slats is 50 mm. Power source Kjellberg Q1500: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm both dry and under water * Recommended cutting range from 0.5 to 40 mm * Maximum piercing thickness 30 mm, increase possible with ProPierce Technology * Marking, notching and punching, including coated metallic materials * Inverter power source with digitally controlled, fully electronic process flow * Integrated cooling with partially automated filling and emptying Ledpfjpm U U Njx Al Ishh Gas control: Fully automatically controlled, processor-controlled plasma all-gas console Q- Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control Extraction TEKA EcoCube 5.5 kW Medium to be filtered: dry, fat-free or oil-free dust/smoke Filter area: 100 m² (4 cartridges of 25 m²) Filter cartridge: BIA M, Type Nano Degree of separation: 99% (according to BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan performance: 4500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz. Current consumption: 11.5 A Current type: 3Ph+N+PE Fan structure: on the system, including silencer duct bend, right side Motor control: frequency converter Noise level: 75dB(A) + max 10 dB(A) with cleaning pulse Intake port: NW 250 mm via intake duct, left side Exhaust: via silencer duct bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: Light gray - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Locking hooks and toggle locks - Compressed air connection and condensate drain each mounted with one Bulkhead fitting - Compressed air connection with hose nozzle d=8mm - Provide the system with grounding bolts - Cable in UL version - EATON frequency converter on the left in the attached control cabinet

Condition: used, Pneumatic edge folding machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-bending sheet metal edges For creating an edge fold Edge folding machine for thin sheet metal, as an alternative to a bending press Manufacturer's No. 9166002, Year of manufacture 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Lhedsdzqbljpfx Al Ijh Space requirement L x W x H: 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The edge fold is the doubling of the sheet metal in the edge area, i.e., folded over once to increase the stiffness of the sheet metal. The fold creates a rounded edge, which reduces the risk of injury from cuts on the sharp sheet metal edge. Ideal for sheet metal processing of sheet metal furniture, cladding sheets, or for the construction of ventilation and soundproofing systems.

Condition: good (used), Year of construction: 1993, operating hours: 3,800 h, functionality: fully functional, overall weight: 10,500 kg, fuel type: diesel, power: 1,299 kW (1,766.15 HP), motor manufacturer: Deutz, A used emergency generator is offered with the following data. Technical data: Lhodpfx Aovmzwxol Ijh Engine: Deutz TBD 620 V12 Generator: Piller Power: 1400 KVA Frequency: 50 Hz Voltage: 230/400 V Year of manufacture: 1993 Operating hours: 3800 Incl. control cabinet Incl. silencer

Condition: new, Side Channel Blower, Two-Stage The VASF 2.50/2-0.AC230 is a turbomachine with a VARIAIR frequency converter, offering high performance with 100% oil-free and contactless operation. These side channel blowers are low-maintenance, highly efficient, and require minimal servicing. Features VARIAIR Frequency Inverter Contactless compression Compact design Inlet and outlet silencers Sealed bearings eliminate the need for lubrication Ljdpfx Ajyk Dkmjl Iohh Vibration damper for horizontal installation Additional cooler Advantages Precise flow rate through speed control Low operating and exhaust gas temperatures Quiet operation Specifications VASF 2.50/2-0.AC230 Flow rate: 24 m³/h Relative pressure: +560 mbar Inverter power: 0.65 kW Hz: 50–300 Hz Sound level: 61 dB(A) Weight: 12.3 kg with motor and inverter Find more items—new and used—in our shop! International shipping costs on request!

Condition: used, Item: D-8667-Becker-Side Channel Blowers Used Side Channel Blowers – Available Ex Stock Several individual side channel blowers with electric motors and silencers. Lodpfx Aljx N E T Us Ishh Originally used in a food and dairy packaging line. Suitable for vacuum and low-pressure air applications. Units are not mounted together and can be sold separately. Ex stock – ready for delivery. Can be sold individually or as a lot.

Condition: new, Kaeser membrane dryer KMM 5 Volume flow with pressure dew point reduction +35 °C -> +3 °C 0.68 m³/min Volume flow with pressure dew point reduction +35 °C -> -20 °C 0.4 m³/min Volume flow with pressure dew point reduction +5 °C -> -20 °C 0.67 m³/min Purge air 0.1 m³/min Compressed air connection R ¾ Min. overpressure 4 bar Max. Overpressure 14 bar Compressed air inlet temperature min. +1° C Compressed air inlet temperature max. +66° C Width 133 mm Depth 133 mm Height 634 mm Mass 5.9 kg Purge air stop valve Yes Membrane fiber in helix structure Yes Outlet silencer Yes Membrane flow from inside to outside Yes Lhedpjvkf Aaofx Al Ish From stock We are on vacation until 06.01. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Condition: used, mileage: 21,000 km, power: 346 kW (470.43 HP), first registration: 05/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: mechanical, emission class: euro6, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal number: #129 MAN TGS 28.470 6x2-2 BL Wiedemann SUPER 2000 – available upon request Chassis * MAN * TGS 28.470 * 6x2-2 BL * 4 * 470 HP/346 kW * EURO 6 * Engine D2676LF52 * MAN Tronic transmission control MAN Comfort Shift ZF 16 S 252 OD * N-drive NMV 221 f=0.98 /drive flange 150 mm for NMV 8-hole * 3,900 + 1,350 mm wheelbase * Front suspension: parabolic 9.5t * Rear suspension: air for high center of gravity * 400-liter fuel tank + 60-liter AdBlue tank * 385/55 R 22.5 STEER-AXLE TL 160&K * 315/70 R 22.5 DRIVE-AXLE TL 154/150&K * 385/55 R 22.5 STEER-AXLE TL 160&K * Chassis color RAL 9011 graphite black * Cab color RAL 2004 deep orange * Halogen beacons * “M” cab 2,240 mm wide 1,880 mm long * Air conditioning * MAN Media Navigation Package / video function via USB/SD / 7” color display / MAN Camera View / AUX-in / USB / Comfort hands-free for 2 mobile phones Body * Wiedemann enviro tec * Super 2000 8.0/6.0 water recycling * 14,000-liter tank * 6,000 liters fresh water * 8,000 liters waste water * Discharge by tilting the tank 45° Vacuum System * Wiedemann & Reichhardt KW 3000 * 3,000cbm/h 80kW * Piping galvanized, DN 150 * Approx. 25m suction hose DN 125 * Suction pipe DN 125 with channel spatula * Silencer Lodpfxjvh H Hhs Al Ijhh High-Pressure System * Uraca P3-45 65, 406 liters at 175 bar * Hydraulic high-pressure hose reel with approx. 180m HP hose DN 32 with automatic rewind * Hydraulic high-pressure hose reel with approx. 80m HP hose DN 13 with automatic rewind Additional fresh water system * Speck NP 25/50-150, 50 l/min at 150 bar * Spring-loaded reel with 15m pressure hose DN10 Special features * Sludge tank made of material 1.4301 * Suction and HP boom * 20-liter hand washing unit (heated) * Stainless steel toolbox * Control cabinet with display * Engine – start can be controlled from control cabinet * NMV – start can be controlled from control cabinet * Radio remote control with display * Equipment cabinet with two flaps – access on both sides * Hose tray * High sound insulation of pump compartment * LED worklights * Central lubrication system Technical data * Unladen weight 18,500 KG * Permissible GVW 28,000 KG * Length 10,400 mm * Height 3,650 mm * Width 2,550 mm For further detailed information and/or photos, please contact us directly. You will find a wide range of further vehicles available for PURCHASE or RENT on our website: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale exclusively according to our terms and conditions and under exclusion of any warranty.

Condition: used, mileage: 10,655 km, power: 375 kW (509.86 HP), first registration: 03/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,650 mm, loading space volume: 14 m³, Year of construction: 2023, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal number: #309 MAN TGS 26.470 6x4 BL Wiedemann Super 2000 8.0/5.0/1.0, Chassis: MAN * TGS 26.470 * 6x4 BL * 375 kW / 510 HP * EURO 6 * Automatic transmission * Air conditioning Body: Wiedemann enviro tec * Super 2000 8.0/5.0/1.0 water recycling unit * 14,000 litre tank capacity * 8,000 litre sludge volume * 5,000 litre wash water * 1,000 litre fresh water * Discharge by tilting the tank up to 45° Vacuum system: Wiedemann & Reichhardt KW 4000 * 4,000 cbm/h 106 kW * Galvanized pipeline in DN 150 * Approx. 25 m suction hose DN 125 * Suction pipe DN 125 with duct cleaner * Silencer High pressure system: Uraca P3-45 65 413 litres/min at 175 bar * Approx. 180 m HP hose DN 32 * Hydraulic hose reel with approx. 80 m DN 13 Additional fresh water system: Speck NP 25/50-150 with 50 l/min at 150 bar * Spring-loaded hose reel with 15 m pressure hose DN 10 Special features: Sludge and water tanks made of stainless steel 1.4301 * Suction and HP booms * 20-litre warm water hand washing unit * Stainless steel toolbox * Control cabinet with display * Engine start can be operated from the control cabinet * NMV start can be operated from the control cabinet * Radio remote control with display Ljdpfxovh H Ife Al Ijhh * Equipment cabinet with two doors – on both sides * Hose storage * Pump chamber noise insulation extended upwards * LED work lights * Central lubrication system Technical data: * Unladen weight approx. 19,120 kg * GVW approx. 26,000 kg * Length approx. 10,100 mm * Height approx. 3,650 mm * Width approx. 2,550 mm For further details and/or pictures, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Subject to changes, prior sale, and errors. The buyer is responsible for verifying the condition and equipment of the goods independently. Sale takes place exclusively under our Terms and Conditions and excludes all warranties.

Condition: good (used), Year of construction: 1997, machine/vehicle number: 16550, Offer 23433 Technical data - Vertical version for filtering welding mist + grinding dust, - Exhaust air can be discharged into the work area or outside - Stationary or semi-mobile installation - Air volume flow up to approx. 500 m³/h - free blowing 860 m³/h - max. vacuum - 26 kPa Lhsdsrl Iwzjpfx Al Ish - Turbine capacity 1050 m³/h - Separation according to filter category M > 99 % - Filter area 3.4 m² - Automatic filter cleaning by counter-air flow during suction operation - Dust collection container - Compressed air connection 3 l/day - Connection pipe inlet + outlet each 100 mm - Silencer - Connection 400 V / 13 kW - Space requirement approx. W 1200 x H 2000 x D 700 mm - Weight approx. 350 kg

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-Tyre Packing Machine Gen.2 is ideal for used tyre companies with large tyre volumes. The triple machine is the perfect solution for cost-effective disposal or resale of second-hand tyres. By doubling or tripling the tyres you achieve an enormous volume reduction, the available storage and loading capacity, as well as the permissible transport weight can be used much more efficiently. Pressing cylinder: Pneumatic Pressing force: 1.23 kN, adjustable Machine size: 1250 H x 1930 W x 660 D mm Machine weight: 93 kg Transport size: 1250 H x 1200 W x 800 D mm Working height: 800 - 1020 mm, adjustable Power supply: Air, up to 10 bar / 145 Psi Working pressure: 6 - 8 bar User-friendly and safe two hand control Strong and long-life design Lede Ry Hujpfx Al Iehh High-performance pneumatic cylinder Ball bearing roller guides Adjustable working height Low noise level by silencer Air quick connector A quality product “Made in Germany” Suitable for doubling and tripling Second-hand tyres Optional extras Machine colour RAL BTS-MF550HD Scrap Tyre Baler Demo-Video shows BTS-Tyre Packing Machine Gen.1, the BTS-Tyre Packing Machine Gen.2 operates on same way. Tyre packing machine, Tyre triple machine, Tyre double machine, Tyre doubler, Tyre tripler, Tyre packer, Tire packing pachine, Tire tripling machine, Tyre doubling machine, Tire doubling machine

Year of construction: 2026, condition: as good as new (ex-display), The BTS-Tyre Packing Machine Gen.2 is ideal for used tyre companies with large tyre volumes. The triple machine is the perfect solution for cost-effective disposal or resale of second-hand tyres. By doubling or tripling the tyres you achieve an enormous volume reduction, the available storage and loading capacity, as well as the permissible transport weight can be used much more efficiently. Pressing cylinder: Pneumatic Pressing force: 1.23 kN, adjustable Machine size: 1250 H x 1930 W x 660 D mm Machine weight: 93 kg Transport size: 1250 H x 1200 W x 800 D mm Working height: 800 - 1020 mm, adjustable Power supply: Air, up to 10 bar / 145 Psi Working pressure: 6 - 8 bar User-friendly and safe two hand control Lhedpfx Aob Rz R Ujl Ijh Strong and long-life design High-performance pneumatic cylinder Ball bearing roller guides Adjustable working height Low noise level by silencer Air quick connector A quality product “Made in Germany” Suitable for doubling and tripling Second-hand tyres Optional extras Machine colour RAL BTS-MF550HD Scrap Tyre Baler Demo-Video shows BTS-Tyre Packing Machine Gen.1, the BTS-Tyre Packing Machine Gen.2 operates on same way. Tyre packing machine, Tyre triple machine, Tyre double machine, Tyre doubler, Tyre tripler, Tyre packer, Tire packing pachine, Tire tripling machine, Tyre doubling machine, Tire doubling machine

Condition: good (used), For sale are 2 identical helical conveyors/sorting systems: 1 with sound-dampened cladding. Bowl diameter: 820 cm Bowl depth: 36 cm Dimensions: Without cabin: 125 x 158 x 135 With cabin: 125 x 158 x 128 The cabin has several access doors. Ljdpfshrntmex Al Iehh Various holders for quick-assembly screws were sorted (cable ties are also likely possible). The helical conveyors are functional, and the control systems for each machine are available. The machines can be inspected and/or tested by arrangement. Machine purchase/sale: BUYING/SELLING PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Year of construction: 2026, condition: new, Airstreamer 580 – High-Performance Extraction System for Aluminium Chips The Airstreamer 580 is a powerful extraction system designed for aluminium chips, making it ideally suited for industrial applications. Its robust construction and mobile design with a removable chip container ensure flexible use and easy emptying. Technical specifications: ✔ Weight: 150 kg, mobile on castors ✔ Chip container: 170-litre capacity, easily detachable ✔ Filter: M-class polyester, antistatic version ✔ Pneumatic filter cleaning (compressed air connection required on site) ✔ Motor: 3.0 kW, 400 V, 50 Hz Lhsdpfx Aopa Nw Ijl Ijh ✔ Suction inlet: 120 mm diameter ✔ Air flow: 2500 m³/h ✔ Nozzle pressure: 30 mbar Safety notice: ⚠️ Certain types of dust and particles can be combustible, which may lead to filter fires or dust explosions. The operator is obliged to take appropriate measures to eliminate ignition sources and must comply with the relevant ATEX directives. ⚠️ This version is not ATEX certified. An ATEX Zone 22 version is available upon request. Optional accessories: 🔹 Super-flexible suction hose (120 mm), low-friction design 🔹 Antistatic kit for grounding all metal components on the vacuum 🔹 Remote start device 🔹 Cleaning set (60 mm) for floor and machine cleaning, made of PVC Includes floor and machine cleaning nozzles, 4 m suction hose, and adapter 🔹 Y-hose adapter (100 mm to 100 + 60 mm) with shut-off slide valve 🔹 XXL silencer for reduced working noise and increased efficiency The Airstreamer 580 offers a reliable and efficient solution for aluminium chip extraction in industrial manufacturing processes. We look forward to hearing from you! Plantec Maschinen GmbH

Year of construction: 2026, condition: new, Airstreamer 480 – Extraction System for Aluminum Chips The Airstreamer 480 is a high-performance extraction system for aluminum chips, ideally suited for industrial applications. Its robust construction and mobile design, featuring a detachable chip container, ensure flexible use and easy emptying. Technical Specifications: ✔ Weight: 120 kg, mobile on castors ✔ Chip container: 110-liter capacity, easily detachable ✔ Filter: M-Class polyester, antistatic version ✔ Pneumatic filter cleaning (compressed air connection required on site) ✔ Motor: 2.2 kW, 400 V, 50 Hz ✔ Suction inlet: 100 mm diameter ✔ Airflow: 1,500 m³/h Ledpfopa Nwysx Al Ishh ✔ Nozzle pressure: 30 mbar ✔ Dimensions (W x D x H): approx. 69 x 90 x 241 cm Safety Notice: ⚠️ Certain types of dust and particles can be combustible, posing a risk of filter fires or dust explosions. The operator is obliged to implement appropriate measures to eliminate ignition sources and to observe applicable ATEX guidelines. ⚠️ This model is not ATEX-certified. A version for ATEX Zone 22 is available on request. Optional Accessories: 🔹 Super-flexible, low-friction suction hose (120 mm) 🔹 Antistatic kit for grounding all metal parts of the vacuum 🔹 Remote start system 🔹 Cleaning set (60 mm) for floor and machine cleaning, made of PVC Includes floor and machine cleaning nozzle, 4 m suction hose, and adapter 🔹 Y hose adapter (100 mm to 100 + 60 mm) with shut-off slide 🔹 XXL silencer for reduced operating noise and increased efficiency The Airstreamer 480 provides a reliable and efficient solution for the extraction of aluminum chips in industrial manufacturing processes. We look forward to hearing from you! Plantec Maschinen GmbH

Condition: excellent (used), functionality: fully functional, working width 230mm working height 120mm 5 heads heads set: bottom/right/left/top/bottom table lubrication Lodpfjy N N S Iox Al Iohh pneumatic pressure of feeding rolls two axes heads regulation spindles speed 6000 RPM electric adjustment of pressure beam feeder with cardan variable regulated feeder solid silenced cabinet

Condition: new, Safety valve for presses IMI HERION / NORGREN PSV valve, twin valve, directional control valve Type: XSz 10 V ID No. 2492982 Serial No. 2608 Equivalent to order no.: 2492951 Pressure: 3 to 10 bar Compressed air connection thread (A)+(B)+(P)+(S): 1/2" Compressed air outlet (R): flange connection Supply voltage: 2x 24 Volt (DC) - Base plate hole spacing 115 x 63 mm, 4x mounting holes Ø 6.5 mm - Equipped with silencer on compressed air outlet (R) Valve body dimensions L x W x H: 105 x 90 x 220 mm Dimensions with silencer L x W x H: 180 x 165 x 220 mm Weight: 3.0 kg New, unused, from stock Ledpfx Aow T U A Sel Iehh

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 27 Reviews ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Free Shipping: 10-day delivery ✈️ ✅✅✅ Energy Efficiency Class A+++ ✅✅✅ PLUS VAT & SHIPPING* ►►Buy Now◄◄ ✨Sandblasting Set with Tank✨ ⭕ Sandblasting outdoors, sandblasting indoors, used in mobile sandblasting machines with compressed air. ⭕ Pressure Sandblasting Tank Pressure Sandblasting Tank - Technical Data ✔ Working pressure: 7 bar ✔ Abrasive type: Steel grit, steel shot, garnet, glass beads (glass sand), etc. ✔ Air consumption: L/min, see table below. ❓What is a Pressure Sandblasting Tank❓ ✨ A pressure sandblasting machine is a type of sandblasting equipment that can be used as a mobile unit wherever it is used outdoors to sandblast surfaces that cannot be transported (buildings, large steel structures, etc.). In addition, sandblasting booths can be used to sandblast large parts. Since it operates with air pressure, it also requires a compressor. ✨ As Proton, we have standard sandblasting tanks with 50 l, 100 l, and 200 l. In addition, we can supply various sizes of blasting tanks depending on the need. ✨ All spare parts and equipment are available in our company. We offer sandblasting masks, sandblasting gloves, sandblasting hoses, and boron carbide sandblasting nozzles, which are necessary to ensure that the sandblasting worker is not affected by the environment. ⚡️Areas of Application for the Sandblasting Tank⚡️ To achieve the required surface roughness before painting and coating, this system is used in areas where cleaning and decorative finishing are desired. The main applications are in the shipbuilding industry, foundry industry, automotive, marble, textile, glass, pipe, manufacturing, and assembly industries. ✳️Standard Blasting Tank Sets come with the following equipment.✳️ SANDBLASTING TANK 200 L ►1 pc. Sandblasting control valve ►1 pc. Remote control valve ►1 pc. Quick silencer ►1 pc. Water separator regulator ►1 pc. Remote control handle ►1 pc. Sandblasting flow diverter "Y" connector ►1 set of quick coupling ►20 meters of sandblasting hose ►40 meters of pneumatic double hose ►1 pc. 8 mm Venturi nozzle ►1 pc. 39 mm nozzle holder (MHE-1) ►1 pc. Sandblasting mask ►1 Overall ►1 Pair of gloves ►1 pc. Sandblasting bag Ljdpsfvqixjfx Al Ijhh ►1 pc. Air stand with 2 outlets ►20 m breathing air hose and connectors ❗❗❗ Compressor requirements for sandblasting tanks Engine power: 37 kW - 50 hp, Air flow: 6.25 m3/min, 7-8 bar pressure, a compressor with the required characteristics is required. It is recommended that the compressor be a screw compressor. ❗❗❗

Condition: new, Year of construction: 2024, functionality: fully functional, TIC PRL6C-177.8-VP-MPC Lhjdpfx Alsr Izdxe Ish 6-color printing machine, floor model, electro-pneumatically controlled, closed ink system, ink cup ø 90 mm, cliché size WxD: 4 x 100 x 250 mm and 2 x 80 x 200 mm, height-adjustable carree table with 20 stations via spindle, incl. 20 mandrels for printing on beverage cartridges. Connection: compressed air 6 bar, 230 V, 50 Hz. Pad pressure: 350 kg at 6 bar. Sturdy cast aluminum housing, electro-pneumatically controlled, clear display with modern microprocessor control, optional signal outputs for connecting peripheral devices. Floor-standing models with sturdy, torsion-resistant base frame made of sheet steel with extended downward adjustment travel of the feed table for positioning higher pressurized goods. European/Japanese pneumatic elements, quiet operation due to air silencer, pad pressure adjustable via display, closed ink system with dowel pins for magnetic attachment, ink cups with ceramic doctor ring, contact pressure adjustable via magnetic adjustment. All machines are equipped with side safety screens, emergency stop button and foot switch. Connections required on site: Compressed air 6 bar, 230V, 50 Hz.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, working width: 1,300 mm, overall weight: 4,000 kg, working height: 1,000 mm, height adjustment type: electric, transport height: 1,000 mm, Calibrating / Wide Belt Sander Manufacturer: Costa Model: 71 CCT 1350 Working width: 1300 mm Equipped with: 1x calibration roller (hard rubber approx. 80 Shore), 22 kW, sanding belt dimensions 1380 x 2620 mm 1x calibration roller – newly rubberized (hard rubber 60 Shore), 18.5 kW, sanding belt dimensions 1380 x 2620 mm 1x sanding pad, 15 kW 1x dust removal brush 1x blow-off unit Feed speed adjustable, 4 – 24 m/min. Conveyor belt with vacuum Vacuum blower with silencer Working height: 1000 mm Height adjustment of the upper machine part (easy integration into existing production lines) Connection: 380 V 50 Hz, 200 A Total connected load approx. 65 kW Dimensions approx. 3000 x 2500 x 2400 mm (LxWxH) Weight approx. 4000 kg Lhedpfx Aljxl N Ths Ioh