Used Schelling Storage System for sale (44,141)

Condition: defective spare-parts repository (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 30038908, overall weight: 15,700 kg, We are selling a damaged machine that requires repair – sold as is, without warranty: Machine: Hedelius Tiltenta – CNC machining center – T7 Magnum 1R 40/530/3200/12 Year of manufacture: 2016 Serial number: 30038908 Weight: approximately 15.70 tons Damages (not a complete list): Ball screw of the X-axis is defective, including bearing, adjusting nut, timing belt, and 2 x adjusting nut KGT. Disc spring package on the fixed stop of the X-axis is defective. Dsdpfx Apjzy U Ruevowb Hood of the HSA spindle is defective. Machine terminal is defective. MC screen/hard drive is defective. Slight deformations on the chip conveyor and compression on cable connections. The connecting lines of the terminal are defective and must be completely replaced. The tension bolts of the catching device of the Z-axis must be replaced. The machine geometry can only be measured after the machine has been electrically repaired. Any further damage to the geometry can only be recorded and determined afterward. The energy chain must be replaced. Length approx. 1,400 to 1,500 mm. Whether the Sauter swivel head was damaged during transport can only be determined during commissioning. The vertical slide of the Z-axis is defective and must be replaced. The left door must be straightened. Welding work may be required on the guide. Door switch and emergency stop chain must be checked during commissioning. Straightening work may be required at the pick-up station, as the terminal collided with it. The linear measuring system (LMG) of the X-axis is defective and must be replaced. The machine is sold in its damaged condition as a damaged object requiring repair without any warranties! The machine must be picked up within a short period, no later than week 39, otherwise storage costs will be charged. Sale basis: loaded onto a truck at the Spieß location, 61276 Weilrod Storage costs: from 21.09.2026, to be borne by the buyer.

Condition: used, Year of construction: 2003, TECHNICAL DATA SHEET 1. General Information Manufacturer: SCHELLING Anlagenbau GmbH Country of Origin: Austria Machine Type / Model: FX-H 430 / 400 Machine Number (Serial No.): 220.047 Year of Manufacture: 2003 Machine Condition: Used / Second-hand 2. Application Primary Application: Plywood cutting Material Type: Plywood sheets and wood-based panels Cutting Type: Straight panel cutting, industrial panel sizing 3. Electrical Specifications Supply Voltage: 400 V Frequency: 50 Hz Phase: 3-phase (3~) Rated Current: 40 A Installed Power: 21 kW 4. Mechanical / Functional Characteristics Machine Category: Industrial cutting machine Construction: Heavy-duty industrial steel frame Drive System: Electric motor-driven cutting unit Control System: Siemens components (to be confirmed) Dwjdjydimaspfx Apvjb 5. Safety & Compliance CE Conformity: Applicable (documentation to be confirmed) Safety Features: Emergency stop, protective guards

Year of construction: 1996, condition: used, Tank & Environmental Protection Wozniack – Specialist Company in accordance with the Water Resources Act Dear Sir or Madam, We offer a 100,000-liter double-walled storage tank for diesel, complete with a new diesel dispenser including data recording. Nominal capacity: 100 cubic meters Quantity: 1 Used, but fully refurbished, meaning the tank has been cleaned, reconditioned, primed, and painted. Dwedpfxec Nk A Ue Apvsb Color: RAL color; however, you can specify your own color preferences at any time. The system is primed and will be painted. Material: Steel in steel, material S235JRG2 Documents: Manufacturer's certificate / test certificate according to DIN 6616 D/2 and nameplate Quantity: 1 dipstick Quantity: 1 vent pipe Quantity: 1 filling pipe Quantity: 1 new limit switch Quantity: 1 new leak detection device with leak fluid Quantity: 1 ladder Quantity: 1 suction line Shape: Cylindrical storage container with feet/console Tank dimensions: Length approx. 15,750 mm Diameter approx. 2,900 mm Weight approx. 16,000 kg Storage: Above ground Of course, you can also customize your tank system! All our systems are thoroughly inspected and checked by selected employees in our company. We also offer cost-effective delivery upon request. Inspection of our systems is possible at any time. We have a range of other tank systems for above-ground and underground storage in various sizes available for sale on our premises. All our tank systems can also be offered without a diesel pump. Special offer: Liquid fertilizer – AHL tank systems in sizes from 10,000 to 100,000 liters. Water tank, fire water tank – available. Price / Shipping The price for the tank system is valid ex works Warstein, unloaded. Delivery can be offered at a low cost for an additional fee. Delivery time: immediately You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and, as an approved specialist company in accordance with the Water Resources Act (WHG), can professionally empty, clean, dismantle, and remove them. Sincerely, from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Condition: excellent (used), Year of construction: 2024, TBM-D 2009006 – Position Sensor Box / Inclination Sensor Box V3 Manufacturer: TBM SW-Entwicklung und Elektronik GmbH (Germany) Dwedpfx Apeyc H R Tjveb Production date: 02/2024 Power supply: 12 V DC, power consumption 70 W Condition: used, very good, fully functional Professional measurement/control box designed for industrial applications. The device is used for handling and processing signals from position/inclination sensors in test systems, automation, and research & development stations. Equipment and features: • LCD display for parameter presentation • Numeric keypad for configuration and operation • D-Sub communication interface • 12 V power sockets • Robust aluminum housing • CE marking • Device inspected (TBM inspection stickers)

Condition: used, Year of construction: 2012, Overview  Dsdpfx Apov Da Dlsvewb This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details - Wort yield: 1,000 liters per brew - Heating system: Steam - Current status: Installed and ready for operation - Availability: Immediately Scope of delivery  - Brewhouse | Mini Brewery System | CI T 10 | 2012 - 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) - Steam boiler | Mini Brewery System | - | 2012 (electric) - Plate heat exchanger - Hot water tank | 1,500 L - Reverse osmosis system | ALFA | compact model | - - Capacity: 150-200 L/h - 4x Isobaric fermenter | Mini Brewery System | 1,000L | 2012 - 4x Horizontal isobaric maturation tank | DuoTank | 500 L | 2018 - Cooling jacket & bag system for optimum beer preservation

Condition: ready for operation (used), functionality: fully functional, A good used barcode verification system featuring twin belt drive with speed control - system was used for automatic labelling of the underside of boxes/cartons on a production line (label applicator was removed and sold) - barcode scanner is integrated to detect the presence of the label (which contained a barcode) and if no label detected the system alarms and stops - barcode scanning can be disabled if not required - setup currently for EAN 13 Barcodes and has Teach facility built in for new barcode or changeover Dedpfowufb Asx Apvewb Conveyor could also be used for Ink Jet Printing of underside of packs Could be refitted with your own label applicator also - mounting boss still in place for original Pago Applicator Single phase 240Volt AC supply Ready to ship worldwide

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Djdpozzrutofx Apvowb Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Condition: excellent (used), functionality: fully functional, Complete Cheese Plant located in Ireland available immediately. Current cheese production setup: Cheese blocks are in a 60 kg format to match the process floor moulds, x30 blocks of cheese per vat, x20 vats per run x1.8/vats equals 36.0 tonnes of cheese in 24 hrs. Milk silos external: Milk silo 1 - 136000 ltr - Installed 2006 Milk silo 2 - 136000 ltr - Installed 2006 Milk silo 3 - 136000 ltr - Installed 2006 Milk silo 4 - 160000 ltr - Installed 2007 Milk treatment room: Milk separator (originally the milk clarifier) - 22000 ltr Milk Bactofuge - 22000 ltr Plate plant including pasteurization section - 22000 ltr Regens 1+2 from 4C to 30C - 22000 ltr Tetra alfast system (online milk STD) - 22000ltr Whey room: Whey Clarifier - 22000 ltr Whey cream separator - 22000 ltr Whey cooling plant - 22000 ltr Whey cream storage and cooler - 5000 ltr x2 RWBT: RWBT 1 - 30000 Dwodpfxjzzd Dms Apveb RWBT 2 - 30000 x2 Final whey silos: Whey silo 1 272000 ltr Whey silo 2 272000 ltr Vats: Vats 1 APV 22,000 ltr - Installed Prior 2006 Vats 2 APV 20,000 ltr - Installed Prior 2006 Vats 3 APV 20,000 ltr - Installed Prior 2006 Vats 4 APV 22,000 ltr - 2007 SPX rennet dosing system x2 curd pumps: Old curd pump 22000/Hr - N/A New curd pump 22000/Hr - 2007 x2 pre-presses and block format: Press-vatic 1 1.8T/hr - 2007 Press-vatic 2 1.8T/hr - 2007 x5 main presses: Press 1 - 0.45T/hr - 2007 Press 2 - 0.45T/hr - 2007 Press 3 - 0.45T/hr - 2007 Press 4 - 0.45T/hr - 2007 Press 5 - 0.45T/hr - 2007 x4 holding tables: Holding table 1 - 2007 Holding table 2 - 2007 Holding table 3 - 2007 Holding table 4 - 2007 Demoulding unit and washer: 2007 MF plant (brine) x1 unit: 1146 litres/Hr - 2007 Brine: Automated crane - Timed/programmed - 2007 Brine basin 1 (14 racks per basin) - 12.6T - 2007 Brine basin 2 - 12.6T - 2007 Brine basin 3 - 12.6T - 2007 Brine basin 4 - 12.6T - 2007 Brine basin 5 - 12.6T - 2007 Brine basin 6 - 12.6T - 2007 Brine basin 7 - 12.6T - 2007 Brine basin 8 - 12.6T - 2007 Brine basin 9 - 12.6T - 2007 113.4T brining capacity Brine silo x1: Brine silo - 55000 - 2007 Brine mixing silo: x1 mixing tank and auger - 3000 - Prior 2006 Cut and pack room: Ferrai machine (block cutting options) - 5T/Hr - 2017 Cryovac machine - 5T/Hr - 1980 Metal detector - 5T/Hr - Around 2006 DEM labeller - 5T/Hr - 2018 Bypass - 4T/Hr - Around 2010 Robots x2: Fresh (brined cheese) - 5T/Hr - 2007 Mature(ripened)/deboxing - 5T/Hr - 2007 Whey: Liquid whey volume generated per hour or per vat is around 17,500 litres. Solids 6/7%. Kg's of fat removed from the whole milk: Determined by the standardized fat required in the cheese, typically 700-800 litres per hour generated. AVAILABLE IMMEDIATELY. CAN BE VIEWED AT SHORT NOTICE

Condition: excellent (used), YZ0105) PANEL SAW WITHOUT REAR LIFTING TABLE Mod. HPP 300/56/56 PROFILINE Numerical Control Power Control POWER TOUCH. Software CADmatic 4 - Professional Rear pushers (N.) 1 - (PACK PREMIUM). With No. 11 clamps / grippers (1 x Power Concept) Max. cutting width (mm) 5600. Useful stroke of the pushing system (mm) 5600 Max. blade projection (mm) 80 Scoring Unit (max. diameter saw / power) mm 180 / Kw 1,5 Main Sawing Unit (max. diameter saw / power) mm 350 / Kw 11 (option Kw 18) Adjustable speed of the saw carriage (m/min) 1 - 150 No. 5 Front supporting tables with Air blowing system (mm 500 x 2810) Labels Printer: PICA II 108 YZ0106) AUTOMATIC REAR STORAGE SYSTEM for PANELS Mod. TFL 211/10/05 Total Space Required (with panel saw) mm 10640 x mm 55660 Mobile upper bridge (on X-axis), with mobile carriage (on Y-axis) and relative vacuum suction cup assembly (mobile on Z-axis) max. speed Mobile upper bridge (on X axis) 110 m/min moving carriage speed (on Y axis) 130 m/min vacuum suction cup group speed (mobile in Z axis) 70 m/min Vacuum suction cup group, 90° rotating Dedpfofg Ewzox Apvewb Automatic management system TLF (by scanner) of the cut panels (but remaining in the warehouse) minimum dimensions mm 800 x mm 2000 Stack dimensions Min mm 2600 x mm 800 / Max mm 5600 x mm 2200 Stack height: mm 1000

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 521.111, saw blade diameter: 360 mm, type of input current: three-phase, cutting width (max.): 3,300 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 51 A, Equipment: saw blade guard, For sale: a professional and efficient IMA Schelling FH 4 330 panel saw. The machine is used in a custom furniture manufacturing facility. It is regularly serviced and ready for immediate operation. It is used for cutting chipboard, MDF boards, and kitchen countertops. Key information and technical condition: Year of manufacture: 2017 Dwjdpfxszvygge Apveb Power: 18kW Power supply: 400V (3 phases) 50Hz Condition: good, in continuous operation Usage history: the saw has been operated in a single-shift mode, 8 hours per day.

Condition: like new (used), Year of construction: 2023, We currently have three SSI Schäfer Logimat SLL 3625x815 Vertical Lift Modules for sale. All three machines were manufactured in 2023 and are in excellent condition. They have seen very little use and have been serviced annually by the manufacturer since installation. Each machine has a height of 11,550 mm. The height can be adjusted and lowered during installation to fit the building’s ceiling height. Each machine has: 62 trays Tray width: 3,625 mm Tray depth: 815 mm Total storage area: approximately 183.1 m² Maximum tray load: 450 kg Together, the three machines provide approximately 549.3 m² of storage space. The machines are equipped with several optional features: LogiPointer LogiTilt LogiBar LogiDriver LogiWork These features help make the picking process faster, easier, and more ergonomic. They also help reduce picking errors and improve the operator’s working position. Please note that these optional features require integration with a WMS or business system. Specifications: Model year: 2023 Model: SSI Schäfer Logimat SLL 3625x815 Dsdpfxszzwurj Apvewb Machine height: 11,550 mm Machine width: 4,135 mm Machine depth: 3,092 mm Tray width: 3,625 mm Tray depth: 815 mm Number of trays: Approx. 60 / machine Maximum weight per tray: 450 kg Electronics: 3/N/PE 230/400V

Condition: new, Year of construction: 2026, overall weight: 5,500 kg, fuel type: diesel, tank capacity: 1,000 l, color: red, power: 400 kW (543.85 HP), output current: 720 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 440 kW (598.23 HP), nominal power (apparent): 500 kVA, total length: 4,450 mm, total width: 1,600 mm, total height: 2,550 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, Are you looking for a professional energy storage solution for industry, commerce, agriculture, photovoltaic systems, or emergency power supply? With the APS battery storage system, Albari Power Systems GmbH offers a high-quality and scalable energy storage system for demanding applications. Technical data: Dwodet Aa Idjpfx Apvob * Storage capacity per unit: 233 / 254 / 440 kWh * Power: 115 / 125 / 220 kWp * Lithium iron phosphate technology (LFP) * High-quality battery modules based on CATL technology * Liquid-cooled battery system * Integrated battery management system (BMS) * Suitable for indoor and outdoor installation * Expandable to larger storage systems up to 2 MWh per application Areas of application: * Self-consumption optimization * Peak shaving (load peak reduction) * Electricity cost reduction * PV surplus storage * Emergency and backup power supply * Industrial and commercial enterprises * Agriculture * Charging infrastructure * Municipal utilities and energy suppliers Optionally available: * APS Energy Management System (EMS) * Island operation / microgrid solutions * Integration of photovoltaic systems * Integration of diesel generators * Integration of charging infrastructure / charging stations * Remote monitoring and energy management * Container solutions up to several MWh per unit Your advantages: ✓ High safety thanks to LFP cell technology ✓ Long service life and high cycle stability ✓ German EMS with high safety standards ✓ German system design by Albari Power Systems ✓ German system integration by Albari Power Systems ✓ Individual project planning and commissioning ✓ Service and support We will gladly create an individual concept for your application. Albari Power Systems GmbH 21376 Salzhausen Price on request according to project configuration.

Year of construction: 1998, condition: used, functionality: fully functional, Grinding master 2000 This is A polishing machine with a 900mm wide table. It has the capability of polishing stainless steel from a hot rolled finish up to a highly polished finish. A wide range of polishing belts are available for this machine, ranging from 60 grit to 400 grit and for a wide range of materials. It comes complete with an air filtration system, that extracts the polishing dust and particles through a water trough. that captures the dust and particles. The clean filtered air is exhausted back into the building. This means that the Grindingmaster can be located in any position in a building without the need for outside venting. Dsdpfxjzlubds Apvswb This system also comes with a customised racking system for the safe storage and easy access to the polishing belts. It also comes complete with a Surface Measuring Device, which can accurately measure and verify the desired surface finish.

Condition: good (used), Year of construction: 2011, machine/vehicle number: 241.186, functionality: fully functional, input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, cutting width (max.): 3,300 mm, saw blade diameter: 350 mm, Equipment: saw blade guard, For sale is a professional and efficient panel saw, IMA Schelling model FT4 330. The machine is currently in operation at a custom furniture manufacturing facility. It has been regularly serviced and is ready for immediate use. It is used for cutting particleboard, MDF boards, and kitchen countertops. Key information and technical condition: Year of manufacture: 2011 Power: 15 kW Dodpfxezvyc Uj Apvowb Power supply: 400V (3 phases) 50Hz Condition: good, in continuous operation Usage history: the saw has been used in a single-shift operation, 8 hours per day.

Condition: not inspected (used), Year of construction: 2018, functionality: unexamined, PSS 35hl brewery for sale including: * Grain storage, milling and handling Dsdpov Av Anjfx Apvjwb * 35hl brewhouse comprising mash tun, lauter tun, wort kettle, whirlpool, HLT, CLT * 18 - PSS FT-140HL fermentation vessels * Yeast tanks * 3-tank CIP plant * Centec Degas 5hl/hr de-aeration system * Romfil XFA8-B filtration unit * Centec FlashPasto 25hl/hr flash pasteuriser * 2 - 140hl bright beer tanks * Services including Certuss TC1500 steam generator, RO plant, glycol system, compressed air plant Equipment manufactured 2018, installation incomplete

Condition: used, functionality: fully functional, overall weight: 5,000 kg, plate width: 1,200 mm, plate length: 1,200 mm, Equipment: type plate available, AMF Zero Point System – Clamping System with Zero Point Clamping Plates, Consoles, Hydraulic Unit, and Accessories Manufacturer: AMF System: Zero Point System Year of Manufacture (Components): Primarily 2013 / 2014 Offered is a comprehensive AMF Zero Point clamping system from industrial use. The system consists of several hydraulic zero point clamping plates, zero point clamping consoles, round changeover and clamping plates, intermediate flanges, adapter elements, an AMF high-pressure hydraulic unit, and extensive AMF clamping and system accessories. The components come from a cohesive clamping and machining system and are suitable for creating flexible workpiece, fixture, and pallet clamping systems on machine tools and machining centers. Individual sale of the components is possible. The existing system includes, among other things: - 1 × AMF Hydraulic Unit, Part No. 515841 - 1 × Large quantity of AMF K20 Zero Point Clamping Modules and System Accessories - 2 × Hydraulic AMF Zero Point Clamping Plates approx. 1,200 × 1,200 mm - 2 × Sets of AMF Zero Point Clamping Consoles, each with 4 stations and a total of 8 K20 clamping modules each - 1 × Clamping Plate Ø 650 mm / 8 Clamping Slots - 1 × Clamping Plate Ø 650 mm / 16 Clamping Slots - 1 × Clamping Plate Ø 1,000 mm / 8 Clamping Slots - 1 × Intermediate Flange / Changeover Table Ø 800 mm - 1 × Semi-circular Clamping Device - Several intermediate and adapter rings - 1 × Large Intermediate Flange / Clamping Device Ø approx. 1,250 mm - Various AMF Clamping Modules, Clamping Studs, Height Elements, Couplings, and Hydraulic Lines - Existing technical documentation Key Technical Data: Hydraulic Unit AMF - Part No.: 515841 - Manufacturer No.: 0113 0469 - Operating Pressure: 40–400 bar - Flow Rate: 2.5 l/min - Supply: 400 V / 50 Hz - Motor Power: 1.1 kW - Separate cable-connected control unit Dodszx Akaepfx Apvjwb - Hydraulic connections with quick-release couplings AMF Zero Point Stations 1,200 × 1,200 mm - Hydraulic actuation - K20 Zero Point Clamping Modules - Operating Pressure: 50–60 bar - Dimensions: approx. 1,200 × 1,200 mm - Weight: approx. 423–424 kg per plate - Years of Manufacture: 2013 / 2014 AMF Zero Point Clamping Consoles - 4 stations per set - 2 K20 clamping modules per station - A total of 8 K20 clamping modules per set - Hydraulic actuation - Operating Pressure: 50–60 bar - Console Height: approx. 143 mm Changeover and Clamping Plates Various designs with: - Ø 650 mm - Ø 800 mm - Ø 1,000 mm - Ø approx. 1,250 mm - Radial T-slots - AMF Zero Point Clamping Modules - Underside clamping studs - Various adapter and mounting options Condition: Used, industrial condition. The components show the usual signs of wear, clamping, mounting, and storage. Some dirt, discoloration, and minor superficial corrosion marks are present. Some of the AMF system accessories are still in their original packaging or appear to be unused. A current functional, leak, or accuracy test of the hydraulic and pneumatic components has not been performed. Sale in the existing condition and scope of delivery as shown in the images. Inspection is possible by appointment. Individual sale is expressly possible.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 327.112, total height: 4,910 mm, total width: 3,270 mm, total length: 1,155 mm, load capacity per storage section: 127 kg, construction height: 4,910 mm, construction width: 3,270 mm, type of input current: three-phase, input voltage: 400 V, empty load weight: 2,972 kg, input frequency: 50 Hz, input current: 7 A, Hänel Rotomat 900 vertical carousel storage system, year 2010, in working order and currently in use. Removed only due to warehouse relocation. Ideal for high-density storage of small parts, jewellery, components, engineering stock, pharmaceuticals, archive items and order-picking applications. Manufacturer: Hänel Model: Rotomat 900 Year: 2010 Specification: 22 carriers Max load per carrier: 127 kg Dodpfxoyu Rrxe Apvewb Max total load: 2,794 kg Carrier size: 2,838 mm wide x 416 mm deep Machine dimensions: 4,910 mm high x 3,270 mm wide x 1,155 mm deep Stainless work surface 400V 3-phase supply MP12N-S-TFT control system Ethernet / webserver / barcode interface Condition: Machine is powered and can be seen operating Clean, well-kept unit from a jewellery business environment Sold only because of warehouse move Sale terms: Viewing available by appointment Buyer responsible for disconnection, dismantling, loading and transport Further photos / video of operation available on request

Condition: like new (used), Year of construction: 2023, functionality: fully functional, 4 Wagner TWINCONTROL 2k paint application systems, color spraying systems 2 x low-pressure systems, used only once for testing purposes 2 x Airmix systems, little used, in new condition Each system consists of 3 piston pumps: 1 x for the base component 1 x for the hardener component 1 x for flushing with accessories On request, also available with stainless steel storage tanks with agitator, 2 x new, 2 x demonstration units Can also be purchased separately Ideal for series production and automation EX version, as it operates only with compressed air Dwsdpfx Apezk A H Ejveb Purchase or lease takeover possible See also document in the appendix (designations) Price description: Two systems always belong together. One system for priming, one system for painting. 1. Twin Control low-pressure (AirCode), either sales price 59,000 euros or lease takeover 1,530 euros/month + 17,000 euros takeover 2. Twin Control high-pressure (Airmix), either sales price 62,000 euros or lease takeover 1,535 euros/month + 19,000 euros takeover Lease takeover subject to: Agreement from the leasing company 3. Stainless steel storage tanks (2 new) with agitator, sales price 3,200 euros 4. Stainless steel storage tanks (2 used) with agitator, sales price 2,400 euros If the complete package is taken over, the price is negotiable.

Condition: used, For sale is a modular test and measurement system from National Instruments, based on the PXI Express platform. The system was originally purchased in 2016 and subsequently expanded in 2018. The device can be used for test automation, multi-channel data acquisition, quality control, GigE camera support, and communication with industrial devices. Current configuration: National Instruments PXIe-1085 – 18-slot PXI Express 3U chassis with a system throughput of up to 24 GB/s, National Instruments PXIe-8880 – embedded PXI Express controller with a 64-bit Windows 7 operating system, 2 × 8 GB RAM expansion for the PXIe-8880 controller, 6 × National Instruments PXIe-8234 – dual-port GigE Vision modules designed for image acquisition from industrial cameras, National Instruments PXIe-4499 – 16-channel, 24-bit module for sound and vibration measurements, 204.8 kS/s, with IEPE and TEDS support, Djdpozv Idtjfx Apvewb a complete set of two InfiniBand–BNC cables for the PXIe-4499 module, National Instruments PXIe-4357 – 20-channel, 24-bit temperature measurement module for RTD sensors, National Instruments TB-4357 – terminal block for the PXIe-4357, National Instruments HDD-8261 – 6-disk, high-speed SSD data storage module with a total capacity of 2.9 TB according to the original configuration, National Instruments PXIe-7846R – reconfigurable I/O module with a Kintex-7 160T FPGA, equipped with 8 analog inputs, 8 analog outputs, and 48 digital I/O lines, National Instruments SCB-68A – shielded terminal block, shielded 68-pin terminal block for R Series DIO and HSDIO devices, 2 m SHC68-68-RMIO cable, shielded 2 m R Series High Speed Digital Cable, power cable. Additionally added: NI PXI-6224 M Series Multifunction DAQ – 32 analog inputs and 48 digital I/O lines 12 × NI 8234 Dual Gigabit Ethernet Controller for Windows – a total of 24 Gigabit Ethernet ports NI PXI-8433/2, 2000 V Isolated RS422/485 – isolated, dual-port RS422/RS485 interface Possible applications: - Multi-camera GigE Vision systems - Automated quality control - Testing of electronics and components - Acquisition of analog and digital signals - Communication via Gigabit Ethernet, RS422, and RS485 - Research and development workstations - Automation of production tests The devices were purchased as part of a single, complete National Instruments system. Original purchase documentation is available for review. The system was used in research and development activities related to electronics, vision systems, metrology, and automation. Technical and visual condition as shown in the photos. Detailed catalog numbers and serial numbers of individual devices can be provided upon request. Sale of the complete system is preferred. Sale of selected modules is also possible after prior arrangement.

Condition: new, Year of construction: 2026, power: 50 kW (67.98 HP), motor manufacturer: Battery System: LIFePO4, Field of application: Construction Empty weight: 1.600 kg Dedpfjy Evlgjx Apvjwb Dimensions of cargo space: 142 x 135 x 170 cm Frequency: 50 Voltage: 400 Please contact Team DPX for more information

Condition: used, empty load weight: 7,540 kg, maximum load weight: 14,460 kg, overall weight: 22,000 kg, axle configuration: 1 axle, first registration: 08/2001, loading space length: 10,450 mm, loading space width: 2,430 mm, loading space height: 1,000 mm, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: crane, Vehicle location: Bovenden, aluminum rims, 1 axle, BPW axles, air suspension, forced steering, lashing eyes, supports, crane behind the house, emergency stop, foldable, 2-point hydraulic support, 3x hydraulic extensions, 1x mechanical extension. Dwodpfxsi Rq I Ns Apvsb Superstructure: Crane Ferrari 7m/t, Honda GX 630 separate engine for crane hydraulics, crane, 2.66m = 2.35t, 11.29m = 0.47t. Crane: 2.66m = 2.35t, 4.19m = 1.545t, 5.89m = 1.015t, 7.69m = 0.73t, 9.49m = 0.57t, 11.29m = 0.47t, (mechanically possible for an extra charge, 13.25m = 0.34t), drum brakes, center and corner outriggers foldable, 2,000 crane operating hours. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, Year of construction: 2015, Complete Knapp Fastline System RA2519 _____ Premium Conveyor Technology Available Immediately A high-quality, modular conveyor system from the Austrian intralogistics specialist KNAPP AG is for sale. The system was manufactured in 2015 as part of an automated material flow system but was never put into operation. It remains disassembled and in storage today. With a conveyor length of approximately 300 meters, numerous buffering sections, RollerDrive curves, and comprehensive original documentation, this system offers a cost-effective alternative to a new, expensive purchase. _____ The system at a glance Feature Description Manufacturer KNAPP AG System Fastline Year built 2015 Conveyor Length approx. 300 m Roller Width 450 mm Accumulation space 720 mm Conveyor speed 0,75 m/s RollerDrive curves 11 units Interroll DriveControls 277 units available _____ High-quality industrial design The KNAPP Fastline series is one of the proven modular conveyor systems for automated material flows. The system was developed for the continuous transport of cartons and containers and is suitable for use in: • Distribution centers • Shipping logistics • Production logistics • E-commerce • Replacement or expansion of existing conveyor systems Thanks to its modular design, individual conveyor sections can be used just as easily as complete system components. _____ Scope of Delivery The scope of delivery includes, among other things: Dwodpfxszwylrj Apvjb Conveyor Technology • Approx. 300 meters of roller conveyor systems • Accumulation roller conveyors • Drive roller conveyors • Conveyor modules of various lengths • Conveyor curves Curves • 11 RollerDrive curves Drive Technology • 277 Interroll DriveControls EC310 Steel Structures • Extensive support columns • Column bases • Connecting elements Pneumatics • Pneumatically controlled accumulation stations • Pneumatic assemblies • Sensors Documentation • Original KNAPP parts lists • Transport and package lists • Documentation of the main assemblies _____ Technical Concept The system is based on the modular KNAPP Fastline system. The material being conveyed is transported on roller conveyors. The storage bins are pneumatically controlled. Thanks to the modular design, conveyor routes can be easily extended or adapted to new warehouse layouts. A key advantage is the use of commercially available industrial components, ensuring that replacement parts will remain available in the future. _____ Premium Manufacturer KNAPP is one of the world\'s leading manufacturers of automated material flow systems. The system is not a custom-built or specially designed solution, but rather based on an industrial mass-production platform. _____

Condition: used, Model MDH 2 Hosokawa Micron Dryer Flash Drying of Filter Cakes, Powders and Granules. Model MDH 2 Micron Dryer manufactured by Hosokawa Micron. Machine was built in 1995 for a pilot plant operation drying a Precipitated Calcium Carbonate (PCC) Filter Cake. The dryer ran periodically for around 2 years and has been in storage ever since. Installed Power – 30 kW (Rotor) 2,2 kW (Classifier) Airflow - 3,000 m3/hour Evaporative 310 kg H2O/hour Capacity - Dsdpfozvxvajx Apvjwb Scope of supply includes agitated twin screw feeder and lubrication system (for rotor drive). In-built dynamic classifier provides control on particle size and retention time. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Year of construction: 2011, condition: like new (used), functionality: fully functional, FGL Glass Storage System + Lightweight Platform Model: FGL-V-5000-CKE-190/BL4 Year: 2011 Load Capacity – per compartment: max. 2,200 kg per compartment Frame: 600 kg/m² Total weight: 6,850 kg / 145 kg per compartment Positions: 8 x 5 = 40 positions Dodpozxc Hbefx Apvswb Model: Lightweight platform for FGL-V-5000-CKE-190/BL4 Year: 2011 Load capacity of lightweight platform: 600 kg/m² Total load capacity of lightweight platform: 25 tons Weight of lightweight platform: 1182 kg Dimensions: L = 9660 mm / W = 4220 mm / H = 2980 mm

Condition: good (used), Soco System Packing Station System 14,800 mm double-deck roller conveyor with 800 mm steel rollers Lower roller conveyor with drive Upper roller conveyor without drive (gravity roller conveyor) 9,850 mm roller conveyor with 600 mm Ø 48 mm plastic rollers, with drive and two through-feed flaps 90° curve with conical rollers and two drives for heavy loads 6,000 mm roller conveyor with 600 mm Ø 48 mm plastic rollers, with drive 9,750 mm roller conveyor with 600 mm Ø 48 mm plastic rollers, without drive 6 x Rocholz System Flex packing and work tables Carton magazine Workstation lighting Keyboard and mouse tray with articulated arm Monitor mount with articulated arm Dsdpfoxl Rn Tex Apvswb 10-way power strip Perforated back panel PC mount Storage shelf Width: 2,000 mm Depth: 800 mm 6 x 1,000 mm Transfer roller conveyor, 600 mm steel rollers 6 x 1000 mm transfer roller conveyor, 600 mm plastic rollers Switch and control cabinet Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping available upon request!