Used Ruhle Mélangeur Mtr 130 for sale (4,683)

Condition: good (used), The Ruhle IR56 injector, equipped with a set of 56 needles and a corresponding number of incision blades, is designed for processing various types of meat – both with and without bones, including poultry, meat and fish. Thanks to the use of advanced microprocessor control technology, it is possible to precisely regulate all process parameters, resulting in uniformity and high quality of final products. The injector allows precise dosing of brine to each needle, which increases the efficiency and accuracy of the process. Features: – individual supply of brine to each needle separately, allowing for greater precision and efficiency of injection – productivity of the machine up to 5,000kg/hour – tenderizer – an additional bar with a system of incision knives – independent cut-off of brine supply to individual needles preventing formation of so called brine deposits when a needle hits a bone Credorwmndopfx Adhoh – integrated brine preparation station, the design of which excludes contact of used brine with fresh brine – 350mm wide feeding belt – 200mm product clearance The construction of the device together with the high-performance brine pump are made entirely of stainless steel Power 7.5 kW Power supply 400 V 50 Hz / 3N L: x 1600 x W: 750 x H: 2020mm Weight 750 kg

Condition: used, Year of construction: 2014, Used Machine Year of manufacture: 2014 Condition: The machine has been factory-overhauled by Ganner Features and Technical Specifications: Complete standard configuration including: - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blow-out, gluing, and dowel-driving station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1300 mm, travel speed max. 105 m/min. - Z-axis manually adjustable via mechanical digital counter, position adjustable via support table 5–40 mm - Dowel drive-in overhang adjustable from 7–20 mm via a mechanical digital counter; drilling depth from 0–35 mm (for drill bit length GL 70 mm) is automatically adjusted with the drive-in overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GLUE/WATER selector switch for flushing the glue system, each with: 1 stainless steel tank for 7.5 kg of glue and 7.5 l of water - Indicator light showing remaining glue levels in the glue tank - 1 left side stop, 1 right side stop, and 1 center stop (all removable) - 4 start buttons for individual processing of 1–4 workpieces - 4 pneumatic 10° angle clamping cylinders for workpiece thicknesses up to 80 mm, workpiece length (Y) min. 70 mm - 1 extraction funnel, connection Ø 80 mm - 1 TCT control unit with: Built-in industrial PC, including Beckhoff TWINCAT soft PLC, operating temperature range 0–50°C, 15-inch capacitive TFT industrial touchscreen, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and operation optimization, 4 work areas assignable to different programs, graphical workpiece display, parametric programming, zero-point offset, programmable worklists, error diagnosis with plain text Optional equipment: - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle Codpezlbrvsfx Adherh - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel-driving station (programmable from 5–40 mm), travel speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit drilling from the TOP, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via a mechanical digital counter from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length GL 57 mm), Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (including drilling depth compensation, e.g., for Häfele Minifix) - 4 vertical 10° angle clamping cylinders with mount - 1 keypad with mount Availability: available shortly Location: DE-63934 Röllbach

Condition: excellent (used), Year of construction: 2010, Clamping force: 110 t Tie bar distance: 470x420 mm Min Mould height: 275 mm Max Mould height: 775 mm Platen size : 680x663mm Screw diameter: 22 mm Shot volume: 41 cm3 Opening force: 55 kN Codju Ekaqjpfx Adhorh Opening path: 500 mm Correct injection pressure: 2864 bar Nozzle pressure: 47 kN Path of the pant : 250 mm Forward ejector force: 41,2 kN Reverse: 26,4 kN Max. mold weight : 1000 kg min. tool diameter: 315 mm Working hours: 70.000 h Type: Horizontal Drive: Hydraulic Unilog B6 controll Air Valve Core puller Euromap 67

Condition: refurbished (used), Year of construction: 2010, Laska WW 130 2 Cross feed Mincer 2 speed machine Cedpfxozbt N He Adhjrh Year 2010 All stainless steel Safety interlocked grill lid 130 mince head Up to 3 mince plates and 2 x 4 bladed knives Motor 17 Kw - 35 amp

Condition: used, Year of construction: 1996, functionality: fully functional, Italian-built C-frame eccentric press by S. Giacomo srl, Vittorio Veneto. CE certified. Year of manufacture: 1996, serial no. 6759. Rated at 130 metric tons (1,300 kN nominal force) with adjustable stroke 14–200 mm and max 55 strokes/min. Supplied complete with a Festo BV-200-250-C pneumatic feed unit — a heavy-duty pneumatic clamp feeder with 200 mm width and 250 mm max feed length, operating on filtered compressed air at 3–6 bar. Suitable for strip/coil feeding in progressive die and blanking operations. Weitere Gebrauchtmaschinen von Mabu, Bruderer, Bihler und Schaal stehen in unserem Lager zum Verkauf. Technical Specifications Model: T 130R CE Serial: 6759 Year: 1996 Nominal force: 1,300 kN (130 t) Stroke (adjustable): 14–200 mm Stroke rate: 55 spm max Installed power: 9.25 kW Main voltage: 400 V Air pressure: 5.5–6 bar Weight: 10,000 kg CE certified: Yes Feeder – Festo BV-200-250-C: Type: Pneumatic clamp feed unit Max feed length: 250 mm Max width: 200 mm Csdpezg U R Iofx Adhsrh Operating pressure: 3–6 bar

Condition: defective spare-parts repository (used), Year of construction: 1997, machine/vehicle number: 885258, Defective hydraulic CNC press brake Offer 25514 Technical data: - Max. working length 3060 mm - Distance between uprights 2690 mm - Max. pressing force 1300 kN - Max. distance between table and ram 370 mm - Upright overhang 410 mm - Ram stroke 215 mm - Stroke speeds: - Downward speed (idle) max. 200 mm/s - Upward speed 135 mm/s - Downward pressing speed 1 to 11 mm/s - Total drive power 18 kW - Pneumatic connection 6 bar - Space requirement approx. W 3800 x H 2400 x D 2400 mm - Weight approx. 11500 kg - Including: - 6-axis CNC control system DELEM - Two-hand control panel with foot pedal - Crowning device - Controlled back gauge with height adjustment 5 - 860 mm - Hydraulic upper and lower tool clamping Cjdpfxsx Ew Dqj Adhsrh - Die table movement pneumatically assisted - Machine does not perform referencing because 2 axes on the right side of the back gauge are not functioning; control module may be defective.

Condition: like new (used), functionality: fully functional, Year of construction: 2020, Type / Model: EZS 130 (Electric Tow Tractor) Includes several trailers, type: GTE 106 Serial number: 91652991 Year of manufacture: 2020 Rated pulling force (60 min): 600 N Csdpfozxrf Tox Adhsrh Rated pulling force (5 min): 3,000 N Drive power: 2.8 kW Battery voltage: 24 V Unladen weight (without battery): 320 kg Battery weight (min. / max.): 162 kg / 204 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN2693/4533, Technical data: IHF Jungenthal manipulator, handling device, lifting aid, lifting arm Model Vector 130 (130 kg payload) Manipulator available in quantities of 2!!! Payload at full extension: 30 kg (dependent on equipment/configuration) Height: approx. 4.2 m Upper arm: approx. 3.2 m Reach: approx. 1.6 + 1.9 m = 3.5 m to the articulated arm (height 2.1 m) Working radius 2.4 m, lift 1.4 m Total weight approx. 600 kg Mounting plate 75 x 75 cm Mounting/attachment equipment for tire handling (see pictures) Cedpfxszv Et Ej Adhorh Swivel range 360° Manipulator is disassembled and immediately available. Item location is 75053 Gondelsheim See pictures Shipping via freight forwarder or collection only by prior appointment.

Condition: ready for operation (used), Heidenhain UV 130 ID 324 998-01 SN:7840727D – complete with test report, professionally overhauled and tested, with a 3-month warranty, 100% functional. Scope of delivery as shown in the photos. Please note: In the exchange process, your defective exchange part must not have any mechanical damage, such as breakage, as these cannot be repaired. In this case, an additional charge of €400, including VAT, will be applied. Attention: You are bidding on a Heidenhain UV 130 ID 324 998-01 SN:7840727D inverter for exchange (exchange service). It has been professionally completely overhauled and tested and comes with a 3-month warranty. It is 100% functional, and the scope of delivery is as shown in the photos. In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage, such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €400, including VAT, will be issued. Cedpfxjz Hib So Adhorh

Condition: ready for operation (used), Heidenhain UV 130 ID 324 998-01, serial number: 7840727D – including test report, used, in good condition, 100% functional, scope of delivery as shown in the photos, professionally and completely refurbished and tested, with a 3-month warranty, 100% functional, scope of delivery as shown in the photos. Csdjz Hib Ejpfx Adhjrh

Condition: like new (used), Year of construction: 2022, operating hours: 1,260 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, controller manufacturer: Siemens, controller model: 828D ShopMill, table width: 610 mm, table length: 1,400 mm, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, Inspection possible near Bonn - 12,000 rpm - Separate spindle cooling for constant temperature - Tool holder DIN ISO SK40 with blow-out function - 30-position tool changer with double-arm gripper – tool change time 1.8 sec - Thread cutting without compensation chuck Csdpfx Ajxwufajdhsrh - Roller guides - Coolant and compressed air gun - Screw chip conveyor - Coolant unit - Compressed air cooling for dry machining - Electronic handwheel - Work area lamp

Condition: like new (used), Tumbler Manufacturer: Ruhle Model: MGR 400 Power: 12kW Capacity: 400 litara Up to 25rpm Stainless steel Cooling option Crodpfx Adjxuliqohjh Voltage: 400V / 50Hz / 3N Dimensions: 2150x2150x1930mm

Condition: good (used), mileage: 135,845 km, power: 96 kW (130.52 HP), first registration: 02/2021, fuel type: diesel, tire size: 215/60R16, axle configuration: 4x2, wheelbase: 2,930 mm, fuel: diesel, color: black, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 3, total length: 5,000 mm, total width: 1,990 mm, total height: 1,960 mm, loading space length: 2,600 mm, loading space width: 1,690 mm, loading space height: 1,390 mm, Year of construction: 2021, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, seat heater, traction control, trailer coupling,

Condition: refurbished (used), Year of construction: 2010, machine/vehicle number: R-00678, load capacity: 130 kg, arm reach: 3,200 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB IRB 6640-130/3.2 manufactured in 2010.03. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 6640-130/3.2 Model Number: IRB-6640 Year of Manufacture Robot: 2010.03 Warranty term (months): 12   Payload (kg): 130 Reach (mm): 3200 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Crsdez Izlfepfx Adhsh Weight (kg): 1340   Controller: IRC5 Year of Manufacture Cabinet: 2010.03 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: used, Year of construction: 2025, operating hours: 81 h, functionality: not functional, machine/vehicle number: 5496/25, OGO generator set FD 130 I-Q – damaged in an accident – For sale is an FOGO FD 130 I-Q generator set (serial no. 5496/25), manufactured in 2025, with only 81.4 operating hours. During transport, the generator set, together with the trailer, tipped over onto its left side. As a result, the soundproofing enclosure and several doors were damaged or deformed. In addition, diesel fuel leaked. The installed 4-cylinder diesel engine showed no visible mechanical damage during the inspection, but its technical functionality was not checked. Undetectable damage cannot be ruled out. Crjdpfx Adsz Ha A Tjhsh Known damage: Deformation of the soundproofing enclosure Warping of the housing Broken doors on the control panel and engine compartment Diesel and minor oil traces after the accident Paint damage on the generator housing Sold in its current condition, untested, as is / where is. Inspection possible by arrangement. Ideal for repair shops, dealers, or spare parts recyclers. Sales basis Ex warehouse Neunkirchen-Seelscheid Storage costs From November 1, 2026, to be borne by the buyer.

Condition: like new (used), Year of construction: 2016, Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016) Clamping force: 110 t Screw diameter: 22 mm Shot volume: 41 cm3 Screw L/D ratio: 20 Calculated stroke volume : 41,8 cm3 Correct injection pressure : 2,864 bar Max. screw speed : 500 min Screw tongue : 150 Nm Cjdou Eki Sopfx Adherh Nozzle path contact force : 250/40 mm/kN Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Working hours: 35.953 hours Type: Horizontal Drive: Electric

Condition: used, Injector Ruhle 30 needles Credpfx Aeyab Dpodhjh Stainless steel Electric power: 2.2kW Dimensionsć: 65x135x190cm

Condition: ready for operation (used), functionality: fully functional, The MADO MEW 723 mixing grinder combines mixing and chopping in a single machine. MADO officially classifies it as one of its automatic mixing grinders. It is designed for industrial butcher shops, meat processing plants, and meat processing workshops. It can be used to prepare chopped products, fillings, seasoned mixtures, or bases for sausage production. Its 120-liter hopper is suitable for professional production while minimizing transfers between two separate pieces of equipment. Operation of the MADO MEW 723 The mixing device distributes the pieces of meat, spices, and other ingredients before they pass through the cutting system. The central arm has four mixing profiles. Then, the screw conveyor regularly directs the product towards the cutting system. Depending on the configuration, the manufacturer offers, among other options, a five-piece Unger B98 system or an Enterprise size 32 system. Unger D114, E130, or Enterprise E52 systems can also be used in some versions. Therefore, the exact configuration of this machine must be visually confirmed before announcing its cutting system. This arrangement improves the consistency of the recipes and reduces intermediate handling. The operator can thus prepare a uniform mixture before packaging, portioning, stuffing, or shaping. According to the manufacturer, the MEW 723 can also process large pieces and materials that have been hardened by cold. However, the actual permissible temperature depends on the installed equipment and the nature of the product. Therefore, the machine is suitable for lines where the consistency of the mixing and particle size directly influences the final quality. Cleaning and integration into a line The stainless steel frame meets the common requirements of the food processing environment. The manufacturer also provides a reversing function, a rinsing chamber, a removable mixing device, and a removable cutting body. These elements facilitate access to the work areas, cleaning, and maintenance operations. A screw extraction tool is also indicated in the model's documentation. Consequently, teams can more easily organize production changes and maintenance operations. The MADO MEW 723 mixing grinder can be placed after the cutting or preparation of the raw materials. Subsequently, it can feed a stuffer, a former, a portioning machine, or a packaging line. This integration reduces manual steps, improves production continuity, and promotes more consistent quality. Cjdezpwftopfx Adhsrh However, options such as integrated cooling, a cartilage and nerve separator, a frequency inverter, or a reinforced drive should only be mentioned if their presence is confirmed on the machine. This machine has been reconditioned by Europ'Équipement. Each machine is inspected, cleaned, checked, and tested before being sold to offer a reliable, economical, and durable solution for professionals in the food processing industry. Technical specifications: Manufacturer and model: MADO MEW 723 Year and serial number: 2014 – 20002802 Hopper volume: 120 liters Power supply: 400 V – three-phase – 50 Hz Power, current, and protection: 6.6 kW – 14.6 A – IP54 – CE DQI3QCEH

Condition: used, Year of construction: 1971, Max. pressing length: 2500 mm Max. pressing width: 1300 mm Total pressing force: 60 t Press opening width: 350 mm Heating plate material: Aluminum Operation: Hand lever Number of pressure plungers: 6 pcs Approximate weight: 3500 kg Csdpfxsz Hl Nro Adhjrh Dimensions: 3230 x 1340 x 1775 mm Location: Nattheim

Condition: ready for operation (used), functionality: fully functional, The ASGO MVZ300 vacuum mixer homogenizes meats, fats, spices, and liquids in a 300-liter tank. It is designed for industrial meat processing plants, meat workshops, and prepared meal manufacturers. It can be used to prepare stuffings, hamburgers, sausages, nuggets, kebabs, processed vegetables, or cheese products. ASGO also states that its range allows for the addition of water, ice, salt, and other ingredients during mixing. How does vacuum mixing work? The operator loads the ingredients into the tank, and then parallel arms mix the product in both directions. This ensures that the ingredients are distributed more evenly throughout the mixture. Next, the vacuum system removes some of the air present in the tank. As a result, the mixture contains fewer air pockets and retains a denser structure. Vacuum operation promotes degassing and homogenization of the mixtures. ASGO equips its vacuum range with a pump, a filter, and a vacuum level adjustment. In addition, a vacuum gauge allows monitoring the vacuum during the cycle. However, the provided nameplate does not specify the brand or flow rate of the pump mounted on this machine. Therefore, the pump nameplate should be checked before adding this data to the specification sheet. A tank suitable for 300-liter batches The designation MVZ300 refers to the 300-liter version of the ASGO range. This capacity is suitable for batch production and facilitates the repetition of recipes. In addition, the tilting tank simplifies the discharge of the product after mixing and provides better access to the inside of the machine during cleaning. ASGO offers three parallel arm designs for this range: Z, S, or T. Each design is suitable for a specific type of product and texture. However, the nameplate does not allow confirmation of the arms installed on this specific unit. Therefore, their shape should be verified on the photos of the tank before publishing this information. Integration into an agri-food line The MVZ300 can be used after a grinder, cutter, or manual preparation stage. It can then feed a stuffer, former, depositor, or packaging line. This limits handling between the mixing process and the next step. In addition, ASGO offers several functions for the 300-liter models, including speed adjustment, programmable control, and CO2 cooling. However, the provided nameplate does not confirm these features. Therefore, they should only appear in the specification sheet if the photos or documentation of this machine prove their presence. Cjdpfx Adjzpwu Ijherh Technical specifications: Manufacturer and model: ASGO MVZ300 Date and serial number: May 2016 – 26200 Tank capacity: 300 liters Power supply: 400 V – 50 Hz – 3 phases + ground – 17.2 A Power, weight, and noise level: 5.5 kW – 1,250 kg – 76 dB(A) Dimensions (L, W, H) in mm: 3100 x 1350 x 1900 2QPNY064

Condition: ready for operation (used), functionality: fully functional, Vacuum Mixing and Marinating Cjdezpw S Tspfx Adherh The Vakona ESK vacuum mixer processes meat, poultry, and fish under vacuum. It allows for mixing, massaging, marinating, and tumbling products in a single tank. As such, it is suitable for meat processing plants, processing workshops, and manufacturers of prepared meat products. In particular, it helps to distribute marinades, brines, spices, and other ingredients evenly around the products. The system can process whole pieces or cut products. In addition, the tank performs a controlled movement during the cycle. Depending on the tool installed, the machine performs a gentle mix or a more vigorous massage. Therefore, the operator can adapt the process to the desired texture and the fragility of the raw materials. How does the VAKONA ESK work? First, the operator loads the products and ingredients into the tank. Then, the pump removes air to create the programmed vacuum level. The arm then moves the materials regularly throughout the duration of the cycle. The vacuum facilitates contact between the products and the marinade. Thus, it reduces air pockets and improves the distribution of liquids. In addition, the variable speed allows the movement to be adapted to different recipes. The machine can alternate work, pause, and aeration phases to better control the process. Cooling during the process The ESK range combines vacuum processing with a direct cooling system. An exchanger placed around the tank helps to maintain a stable temperature during mixing or marinating. Thus, the machine limits the heating caused by the movement of the products. This temperature control protects the texture of the raw materials. In addition, it promotes a more consistent process between different batches. Therefore, cooling is of particular interest for sensitive recipes and productions that require a controlled temperature. Recipe control and monitoring VAKONA offers a touch control system capable of storing up to 99 programs in the ESK range. The operator can thus record the parameters specific to each recipe. In particular, it can adjust the speed, duration, pauses, vacuum, and aeration phases. In addition, the system can record process data according to HACCP principles. As a result, the company improves the monitoring of production and more easily reproduces the same settings. An automatic water separator also protects the vacuum circuit during operation. Technical specifications: Manufacturer and range: VAKONA ESK STL Functions: vacuum mixing, massaging, marinating, and tumbling Tank volume depending on model: 60 to 1,500 liters Capacity depending on product: 5 to 1,150 kg per cycle Equipment: cooled tank, automatic vacuum pump, touch control with 99 programs and HACCP monitoring SM+EPKZB

Condition: used, Year of construction: 2010, Edge milling machine Manufacturer: Brandt Type: FTK 130 Year of manufacture: 2010 Crjdpfx Adjzuzlhohoh Note: The technical data and descriptions are a transcript of the original order confirmation. The data is provided for informational purposes only and is not binding.

Condition: used, Uprigth sl20 Cjdpfsztxy Hox Adhorh Working height 8 m Battery pack 2024

Condition: used, total length: 1,850 mm, total width: 1,050 mm, total height: 1,400 mm, Colour: Grey Weight: 500 kg Pulp saw Crsdpfx Adjzrm S Iehsh Harwi 130 45 degrees  5,5kW - Documentation available: No - CE certificate present: No - Serial number: 130 S - Main motor power [kW]: 5.5 - Arbor saw blade diameter [mm]: 30 - Min. saw blade diameter [mm]: 400 - Max. saw blade diameter [mm]: 450 - Table length [mm]: 1500 - Table width [mm]: 1050 - Min. adjustable angle [°]: 0 - Max. adjustable angle [°]: 45 - Voltage [V]: 400 - Current consumption [A]: 8.5 - Fuse [A]: 16 - Power [kW]: 7.3 - Transport dimensions: 1850mm x 1050mm x 1400mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, functionality: fully functional, machine/vehicle number: 249, mileage: 99,080 km, power: 96 kW (130.52 HP), first registration: 03/2019, fuel type: diesel, empty load weight: 2,930 kg, overall weight: 3,500 kg, tire size: 225/65 R 16 C, axle configuration: 4x2, wheelbase: 3,682 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, Year of construction: 2022, operating hours: 1,382 h, Equipment: ABS, AdBlue, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), onboard computer, power assisted steering, power mirror, soot filter, start-stop system, traction control, trailer coupling, FIRST REGISTRATION: 03/25/2019 99,080 KMS ENGINE: 2.3 DCI 130 HP EURO 6 STANDARD AD BLUE PARTICLE FILTER 2-SEATER CABIN WHEELBASE: 3,682 MM ABS – ASR – ESP – BAS – AIRBAG 6-SPEED MANUAL GEARBOX CRUISE CONTROL ONBOARD COMPUTER AIR CONDITIONING RADIO MEDIA NAVIGATION ELECTRIC WINDOWS AND MIRRORS Codpfsz D U Aijx Adhsrh CENTRAL LOCKING TELESCOPIC PLATFORM, BRAND: KLUBB, TYPE: K32: CE STANDARD, YEAR 2019 BASKET: 1 PERSON, 120 KGS WORKING HEIGHT: 12.50 M FLOOR HEIGHT: 10.50 M MAXIMUM REACH: 6.80 M MAXIMUM WIND RESISTANCE: 12.50 M/S 1,382 HOURS OF USE TIRES: 225/65 R 16 C UNLADEN WEIGHT: 2,930 KGS GVWR: 3,500 KGS