Used Renner Rs-Pro 2-18,5 for sale (81,532)

Condition: ready for operation (used), functionality: limited functionality, drilling depth: 710 mm, rotational speed (max.): 1,250 rpm, table width: 1,250 mm, table length: 1,120 mm, spindle diameter: 100 mm, Placing a bid obligates you to collect the machine by the deadline of 28.01.2026! Prompt scheduling of an appointment is necessary after the end of the auction, as the machine has not yet been dismantled! TECHNICAL DETAILS Working spindle diameter: 100 mm Taper bore of working spindle: ISA steep taper No. 50 Drilling depth in one stroke: 710 mm Lowest position of spindle center above table surface: 0 mm Highest position of spindle center above table surface: 1,200 mm Maximum distance between spindle sleeve and tailstock: 2,300 mm Pjdpfex Hfugsx Ampopr Horizontal travel of tailstock: 1,300 mm Spindle speed: 6 - 1,250 rpm Clamping surface of the table: 1,120 mm x 1,250 mm Longitudinal travel of the table: 1,300 mm Cross travel of the table: 1,200 mm 34 feeds for spindle, headstock, and table: 0.017 - mm/rev Stepless feeds for headstock and table: 20 - 1,000 mm/min Rapid traverse in all directions: 2,800 mm/min MACHINE DETAILS Main motor power: 11 kW Main motor speed: 1,450 rpm Power supply: Three-phase current Voltage: 380 Volt Frequency: 50 Hz EQUIPMENT Documentation incl. wiring diagram Electrical diagrams Operating manuals Note: Brake defective, clutch removed (included). Repair costs in Germany approx. €3,000.

Condition: ready for operation (used), Bauknecht ATB 18,5/2-75 Motor,used, strong signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Pleasequire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Pjdsur A Tnjpfx Ampspr

Condition: good (used), Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 18.5 kW -Performance: 41.6 l/sec -Pump length: 1550 mm -Flange outer diameter: 250 mm -Flange inner diameter: 130 mm Psdob A Nx Tepfx Ampspr -Pump diameter: 175 mm -Weight: 235 kg

Condition: used, Year of construction: 1982, pressure 150 t throat 520 mm stroke 30 - 200 mm no. of strokes 15 - 60 /min distance table/ram, max. stroke up, adjustment up 650 mm Pjdevuudbjpfx Ampspr table surface area 1600 x 1000 mm hole in the table 1040 x 140 mm table height over floor 1000 mm passage to the back 1000 mm ram surface 1400 x 800 mm ram adjustment 120 mm power requirement 20,0 kW weight 27,5 t dimensions (WxDxH) 2,3 x 2,75 x 4,5 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (make Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, semi-automatic ram adjustment can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: good (used), Year of construction: 2012, DEMAG crane chain hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with crane canopy (2x3m) The DCM-Pro manulift was developed for safe and fast load handling with one-hand operation. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Due to the control unit being rigidly connected to the load handling attachment, the operator only needs one hand to operate the chain hoist as well as to guide the load. Manufacturer: DEMAG Type: Crane chain hoist Model: DCM-Pro 2 80 1/1 H2.8 V16/4 Load capacity: 80 kg Control: GSA Type 4 Movement radius: sideways 3 metres and forwards/backwards 2 metres Ppedpohwd E Nofx Ampjr Steel beam: included in the offer Condition: used  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, overall weight: 6,200 kg, load capacity: 200 kg, controller model: KRC 2, No minimum price – guaranteed sale to the highest bidder! Podjyfgbkopfx Ampopr TECHNICAL DETAILS Max. pallet weight: 200 kg Pallet size 1: 396 x 396 x 350 mm Pallet size 2: 396 x 600 x 350 mm Number of pallet positions: 51 MACHINE DETAILS Control system: KRC 2 Total weight: 6,200 kg EQUIPMENT Documentation/manual Infinitely variable speed adjustment Robotic cell with KUKA robot KPC2 panel 16 matching pallets Plates for machine adaptation Rack Setup station

Condition: excellent (used), Year of construction: 2017, operating hours: 18,500,000 h, KBA RA105PRO 5+L ALV2 FAPC ref 2967 year 2017 impressions – 185 million max. output – 17,000 sph CX – 1.2mm Technotrans – Inking unit temperature control BALDWIN washing system Anilox roller 100 l/cm / 80 l/cm KBA VariDry BLUE IR/HotAir BECKER air supply cabinet ErgoTronic Lab ErgoTronic PSO Match ErgoTronic Quality Pass ErgoTronic ACR LogoTronic Professional Ppjdpfx Amsytunhjper Technical condition: very good.

Condition: used, Year of construction: 2023, Former Transport. Medium swath Set of wheels 320/40 R22.5 CE / Equipment package Standard PTO shaft mounted Set of tandem axles steerable / Psdpstu Hn Tsfx Ampepr

Condition: good (used), Year of construction: 2007, machine/vehicle number: 195311, Offer 24601 Technical data: - Welding current max. 450 A 60% ED - 320 A 100% ED - Welding current adjustable in 3 coarse steps + 12 fine steps - 50 to 450 A - separate wire feed case with intermediate package 1 m - 4 roller wire feed continuously adjustable - 2 cycle + 4 cycle – regulation - Digital volt + amp display - Spot welding Ppjdpfxjvt Trzj Ampor - Interval welding - Water-cooled hose package 4 m - Ground cable - Pressure reducer - Connection 400 V / 50 Hz / 63 A - Space requirement approx. W 750 x D 1100 x H 1600 mm - Weight approx. 180 kg

Condition: good (used), Year of construction: 2004, overall weight: 433 kg, volume flow: 2.8 m³/h, operating pressure: 9 bar, input voltage: 400 V, pressure: 10 bar, Screw compressor AIRPRESS APS 25 (2) 18.5 KW motor, Podpfx Amsq Dabpepspr Capacity 2,80 m3/min Pressure 9 bar Year of production 2004. Mileage 16371 MTG Net price 9000,- Gross price 11070,-

Year of construction: 1998, condition: excellent (used), RENNER RS 15 screw compressor ROTORCOMP screw stage, 15KW motor, Capacity 1.92 m3 / min, Pressure 10 bar, Ppsdpfjh Eu A Nox Ampor THE MACHINE IS FULLY OPERATING. WE HAVE A LARGER NUMBER OF COMPRESSORS FOR SALE SCREWS, REFRIGERATION DRYERS AND EQUIPMENT WELDING. WE PROVIDE REPAIRS AND SERVICE.

Condition: excellent (used), Year of construction: 2013, Year of manufacture: 2013 Ppodpfx Amjy Eyzxjpjr Controls: Visual 2 (PLC, Parallel Subroutines) Additional I/Os in the robot rack: 7 inputs / 8 outputs + additional I/O card 16 inputs / 16 outputs Interface for communication with the injection molding machine: EUROMAP 12 (length 10 m) Conveyor Belt Control: YES Control cabinet: separately Documentation: YES Robot condition: very good Warranty: None X-axis travel: 3000 mm Y-axis travel: 700 mm Z-axis travel: 1400 mm R1 pneumatic head rotation: 0° - 90° R2 pneumatic head rotation: 0° - 180° and 0° - 90° Workpiece gripping circuits: Number of digital vacuum (level control from the robot panel): 2 (can work as pressure) Number of pressure circuits: 4 Number of digital vacuum (level control from the robot panel): 2

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Ppsdoyz Dhzjpfx Ampjr Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible

Condition: new, Heller uniPro SL90-F CNC card A 23 < unused > in sealed original packaging 100% functional Ppodpei Ea Hnofx Amper

Condition: new, Heller uniPro SIO B 23.032298X-02813 CNC card < unused > in sealed OVP 100 % functional Ppjdpfei Ea Hksx Ampor

Condition: new, Year of construction: 2025, load capacity: 2,000 kg, 3-axis rotary and tilt positioner, 2000 kg load capacity, clamping plate diameter 0.8 meters. Proven in the fields of construction and agricultural machinery, commercial vehicles, industrial trucks, as well as in aerospace and energy technology. Suitable for welding, assembly, machining, etc. Featuring a stable and robust design, flexible positioning across three axes (including overhead), and easy operation, these positioners simplify welding, assembly, and handling of large workpieces. Advantages: - Faster production, increased productivity - Optimal workpiece positioning improves weld quality and allows for higher deposition rates - Enhanced safety; dangerous crane handling is significantly reduced - Positioning on up to three axes simultaneously without cumbersome re-clamping - Simple operation and ergonomic design protect and relieve the operator - Flexibility through modular adaptability and custom special versions available Podpfxexbhp Ho Ampspr Operating principle: The rotary arm axis is positioned above the clamping plate, so the rotary arm acts as a counterweight to the workpiece. As a result, these machines are much more powerful than standard rotary-tilt tables or rotary-tilt positioners. This principle enables the handling of the specified loads in any position. Endless rotation of the two rotary axes and additional height adjustment allow for all workpiece orientations (including overhead). Turntable speed is infinitely variable from 0.05 to 0.6 rpm. 2000 kg load capacity. - Wireless hand remote control - Continuous 360° rotation - Continuous 360° tilting - Stroke: 1000 - 1500 mm - Arm reach radius: 1.2 meters

Condition: new, Year of construction: 2025, Hand-operated folding machine in a stable design. The machine has a stop for the same bending angle 0-155 degrees and rear stops for holding the sheet. These folding machines are characterized by a high bending performance with great weight. Excellent workmanship and practical detailed solutions convince with this bending machine, the bending capacity with 1.2 mm sheet steel is sufficiently dimensioned for most applications. Edge bench 3.14m / 1.2mm Bending length: 3140mm to sheet steel 1.2mm Bending angle: 155 degrees Pjdjcb H Eijpfx Ampjpr Folding beam: 30mm Weight: 840 kg Roll cutter 0.8mm plus 350 euros We are looking forward to your contact! We issue the invoices with 0% (intra-community delivery)

Condition: excellent (used), For sale: high-quality face mill with indexable inserts ASF-35-45-20 mounted on an SK40 arbor. A professional tool for roughing and finishing operations, ideal for use in CNC machining centers and conventional milling machines. The cutter head's 45° approach angle ensures excellent cutting performance, longer insert life, and a smooth surface finish on the workpiece. • Type: face mill with indexable inserts • Model: ASF-35-45-20 • Mounting: SK40 / DIN 69871 • Approach angle: 45° • Number of insert seats: approx. 6–8 • Application: milling of steel, cast iron, stainless steel, and other structural materials • Condition: used – very good, ready for operation Ppjdsxk T Igspfx Ampsr

Year of construction: 2001, condition: excellent (used), Weishaupt GL 30/2-A dual fuel burner -Version Z: Output 300-2150KW: year of construction:2001 Oil throughput 40-180 kg/h With existing fittings Dungs DN50 Мы говорим по русски! Visits please only after telephone arrangement! Preferred sale to dealers, tradesmen or export. All information without guarantee, errors and prior sale reserved. Psdpfxjf Src Re Ampepr The seller is not liable for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Year of construction: 1998, condition: excellent (used), Dual fuel burner Weishaupt RGL40/2-A -version ZM-NR Power 500-3450KW: Year:1998 Oil throughput 55-290kg/h Ppjdpshl Inmefx Ampjr With existing fittings Dungs DN65 Shipping possible worldwide. Мы говорим по русски! Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Condition: excellent (used), RS-Simulatoren Temperature Shock Chamber ST2K 1000 / 55 Device Data Manufacturer: RS-Simulatoren Model: ST2K 1000 / 55 Design: Temperature Shock Chamber Cooling: Water-cooled Description Used temperature shock chamber for standardized thermal shock testing. Suitable for material, component, and reliability testing. Ideal for use in industrial, automotive, research, and quality assurance applications. System Description - 2 separate temperature chambers (hot/cold) - Automatic horizontal test basket transfer - Fast cycling for temperature shock tests Temperature Ranges Hot chamber: +40 °C to +180 °C Cold chamber: -70 °C to +100 °C Temporal deviation: ±0.8 K Test Chamber Volume: approx. 580 liters Internal dimensions (W x H x D): approx. 1070 x 680 x 800 mm Max. load: approx. 150 kg Power Supply 400 V / 3~ / N / PE / 50 Hz Power: max. 33 kVA Max. current: 65 A Media Connections Cooling water: G 1", approx. 3 bar (max. 10 bar) Cooling water demand: max. 3.2 m³/h Cooling water return: non-pressurized Compressed air: NW 7.2, 4–10.5 bar Dimensions External (W x H x D): approx. 2800 x 2400 x 2200 mm Weight Approx. 2800 kg Features - Horizontal basket movement - C-rails in the test chamber - Large test basket (>1000 mm) - Observation window - Interior lighting - SE-604 control system - Programmable operation and data logging - RS232 interface Cooling System Refrigerants: R449A / R23 R449A: approx. 8.0 kg R23: approx. 2.5 kg Operating Data Operating hours: approx. 4,500 hrs Sound level: approx. 67 dB(A) Ambient Conditions Temperature: +12 °C to +30 °C Humidity: 25% to 75% r.h. Scope of Delivery - RS-Simulatoren Temperature Shock Chamber ST2K 1000 / 55 - Delivery as illustrated Optional Pre-Delivery Service - Functional test - Refrigerant service - Leak test - Test run with report Condition Used. Condition as shown in photos. Note Used equipment, sold without warranty. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to prior sale and modifications. Should you have any questions, please feel free to contact us. Psdpfey H Igfjx Ampspr

Condition: used, functionality: fully functional, This offer is for a used ‘Ricoh Pro C7200x’ colour production system Items for sale: 1 x Ricoh Pro C7200x with the following specifications: Includes Fiery Controller E-45A Includes Vacuum Feed LCIT RT5120 Includes Finisher SR5050 incl. Banner Sheet option Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 2,403,577 pages Colour: Approx. 1,749,798 pages Black: Approx. 653,779 pages Ppsdpfey Dffyex Ampsr Condition: This is a second-hand machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, This offer is for a used ‘Ricoh Pro 8310’ black-and-white production system Item for sale: Psdpfoy Altbox Ampopr 1 x Ricoh Pro 8310 with the following specifications: Includes Vacuum Feed LCIT RT5120 Includes Finisher SR5110 Not the right configuration? We can easily configure the machine to your specifications. Please feel free to contact us! Meter readings: Total: Approx. 431,372 pages Condition: This is a used machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 2025, total length: 1,450 mm, total width: 800 mm, total height: 2,200 mm, Empty weight: 970 kg Price: On request Movable Press-Cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes Ppsdpfx Aew N Su Djmpor - Operating hours: 0 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 380 - Table length [mm]: 1500 - Table width [mm]: 300 - Ram length [mm]: 100 - Throat depth [mm]: 1100 - Height adjustment [mm]: 750 - Motor power: 3.0kW - Transport dimensions: 1450mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2025, total length: 1,100 mm, total width: 800 mm, total height: 2,200 mm, Empty weight: 540 kg Price: On request Movable pressing-cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 60 - Max. stroke [mm]: 380 - Table length [mm]: 1000 - Table width [mm]: 260 - Ram length [mm]: 100 - Throat depth [mm]: 750 - Height adjustment [mm]: 750 - Motor power: 2.2kW - Transport dimensions: 1100mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 540kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Podpfxsw N St Hj Ampjpr VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum