Used Prima Power Laser Laser Cutting Machine for sale (80,823)

Condition: new, Year of construction: 2024, table length 3048 mm table width 1524 mm burner heads 1 stroke 270 mm speed 100 m/min Rsdpewp Thyefx Ad Rocb dimensions 8900 x 2260 x 2220 mm weight of the machine ca. 7.500 kg

Condition: new, Year of construction: 2026, table length 3050 mm table width 1530 mm Rjdpfewp Ta Nox Ad Rjcb burner heads 1 stroke 350 mm speed 140 m/min

Condition: repair required (used), functionality: limited functionality, Year of construction: 2014, TRUMPF TruLaser 5030 fiber Year of manufacture: 2014 5,000 Watt TruDisk 5001 Siemens 840D SL Special price due to site closure / insolvency Update 05/27/2026: The machine has been thoroughly cleaned. It is in considerably better condition than can be seen in the photographs. For sale is a used TRUMPF TruLaser 5030 fiber from 2014. The machine was in continuous productive use until 2025 and, according to the previous owner, operated without any known problems. Subsequently, the system was shut down for approximately one year as part of an insolvency and was no longer operated. Currently, the machine is not connected and therefore cannot be demonstrated. Ideal machine for a buyer who wants to refurbish, clean, connect and put the system back into operation themselves. For this purpose, the machine is available at an exceptionally attractive special price. Extremely affordable. Purchase price in 2014 was approximately EUR 300,000. Technical data Manufacturer: TRUMPF Model: TruLaser 5030 fiber Year of manufacture: 2014 Machine type: Laser cutting system Laser source: TRUMPF TruDisk 5001 solid-state laser Laser power: 5,000 W Control system: Siemens 840D SL Rcedpfx Adjy Tmcxj Rob Working area / max. sheet size: 3,050 x 1,550 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 116 mm Rapid traverse: 280 m/min Max. workpiece weight: 900 kg Max. sheet thickness: 10 - 25 mm according to documentation Operating voltage: 400 V / 50 Hz Machine weight: approx. 12,000 kg Installation dimensions L x W x H: approx. 9,500 x 6,300 x 2,500 mm Color: gray / blue Cabin: Protective cabin Equipment TRUMPF TruDisk 5001 solid-state laser Laser cooling unit Cooling unit for system Universal cutting head Multi-chamber extraction system Light barriers Electric roll-up roof Hydraulically adjustable pallet changer Protective cabin Notes on condition Machine currently not connected Test run currently not possible Operating hours could not be read out Machine was idle for approximately one year due to insolvency Connection cable to the main power supply has been cut, must be replaced Machine, cooler and extraction system should be cleaned and technically inspected Filters / maintenance should be renewed or carried out before recommissioning Machine documentation is not completely available according to the expert opinion, but the manuals can be quickly obtained digitally Positive aspects Cutting head was renewed in 04/2021 Machine was in use until 2025 Very interesting basis for self-refurbishment Remarkable special price possible Sale Location: Germany Availability: immediately Price: on request / special price Condition: used, currently not demonstrable Sale from location, as inspected Errors, prior sale and technical changes reserved.

Condition: excellent (used), Year of construction: 2011, Sheet metal format: 3000x1500 mm Axes X/Y/Z: 3065/1560/150 mm Rcsdpfsxxkm Nsx Ad Rjb Price on request.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 17,958 h, machine/vehicle number: 0752101130704, degree of automation: automatic, pipe diameter (max.): 152 mm, power: 21 kW (28.55 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 10,000 kg, PRICE REDUCED!!!! We offer this used BLM LT FIBER EVO TUBE LASER laser cutting machine, year of construction 2021 with a 3kW fiber laser source. It has high-speed precise cutting and an integrated loading and unloading system. Suitable for steel, stainless steel and aluminium. It can cut complex shapes and profiles. Available for inspection and ready for immediate sale. Must be seen. Serial number: 0752101130704 Manufacture date: 10/2021 Supply voltage: 380 V Phases: 3 Supply frequency: 50 Hz Total installed power: 21 kVA Interrupting capacity: 25 kA Control voltage 1: 24 V Control voltage 1 type: DC Control voltage 2: 220 V Control voltage 2 frequency: 50 Hz Weight: 10000 kg Rjdpfjyui Eksx Ad Rocb If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2008, table length 4000 mm table width 1500 mm burner heads 1 Control SIEMENS 840D Capacity 6000 Watt speed 10 m/min weight of the machine ca. 19 t dimensions of the machine ca. 9,5 x 7,3 x 3,1 m This Trumpf TrueLaser Cell (TLC) 7040 with 6 KW is a 5-axis laser machine. Description: - Max. Sheet thickness: ST:20mm / VA:20mm / AL:15mm - Closed machine room - Laser TruFlow 6000 - ADC cutting head - Positioning laser diode - Suspended control panel stationary, rotatable Rcedsu N I Erjpfx Ad Rsb - Teach panel - Magnetic coupling, head detection - Laser power control - Power cycles - Laser welding

Condition: like new (used), Year of construction: 2022, table length 1600 mm table width 1000 mm burner heads 1 Control RDC6445G Control System laser capacity in Watt 80 Redpfx Aexcblkod Rjcb travel -x axis 1600 mm travel -y axis 1000 mm travel -z axis 300 mm weight of the machine ca. 300 t dimensions of the machine ca. 2,2 x 1,8 x 1,1 m

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, Laser power: 40000w/30000w/22000w/20000w/12000w/6000w/3000w Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 6100mm*2500mm Cutting Speed: 200m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Rodpfog D Tp Uex Ad Rjcb Cooling Mode: WATER COOLING Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Automated Nozzle Changer The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs. 2. Active Anti-collision Function Effectively reduce the damage rate of laser heads, help you save maintenance cost. 3. One-click Processing All functions of the system are distributed logically and orderly to achieve fully automatic mass production. 4. Cast Iron Bed Featuring good shock absorption, Cast Iron Bed keeps its shape all the way with the optimal mechanical property.

Condition: used, Year of construction: 2012, Technical details: y-travel: 1500 mm distance between columns: 2300 (Brücke) mm Beam Hour: ca. 22000 h laser capacity: 6000 W control: CNC P 8109-10-600D table length: 4500 / Auflage: mm Table width: 2300 mm operating pressure: 120hPa Waterpressure - requiered: max. 6,0 bar voltage: 400 / 50 V / Hz dimension laser device LxWxH: ca. L: 3,0 x B: 1,5 m dimension filtering system LxWxH: ca. 1,4 x 2,0 x 2,2 m dimension coolant device LxWxH: ca. 2,55 x 1,0 x 1,9 m space requirements of the machine approx.: gesamt: ca. 12,8 x 5,3 x 4,3 m Flatbed laser cutting machine Application: ind. Cutting and engraving Laser medium Co²; N²; compressed air Sheet dimensions/format 3000x 1500mm Cutting thickness: e.g. steel X5CrNi18-10 = 1 - 25mm / CNS 25mm / aluminum: 1 - 15mm (Tabb. available) Resonator - laser source ByLaser 6000W, wavelength 10.600mm, beamØ 20mm, circular polisariation Shuttle table LxWxH: 4500 x 2300 x 1000mm, load capacity 900kg, table support surface = 3200 x 2000mm Rf cooling type WKL 560, refrigerant R 407C, cooling capacity 65kW, high pressure 27bar, pump 220 l/min, fan Dedusting system, Donaldson type DFPRO6 (size approx. 1.4 x 2.0 x 2.2m) Cross conveyor by Kabelschlepp type SRF 040 (size LxW.H: approx. 3630 x 705 x 1000mm) Rodou Nu R Ispfx Ad Rjcb Light barrier Sick type M 4000 Cutting bridge: Y-path 3000mm, stand width 2300mm, cutting carriage size LxWxH: 400 x 300 x 650mm Operating terminal with complete cabinet combination and manual control unit Cut Control *

Condition: used, Year of construction: 2009, Technical details: Beam Hour: unbekannt / unknown h laser capacity: 4000 W The TLF4000 resonator was installed in a Trumpf True Laser 2525: Laser power: 4,000 W (4 kW) Wavelength: 10.6 µm Rjdpjyuvciefx Ad Recb Beam mode: TEM01* Pulse frequency (gating): 100 Hz – 10 kHz Gas consumption (laser): CO2: approx. 1 l/h N2: approx. 6 l/h He: approx. 13 l/h Cutting gas O2: approx. 500 – 2,000 l/h Electrical power consumption: approx. 33 – 67 kW Adjustable laser power: programmable in 1% increments Laser type: CO2 laser with closed gas circuit Translated with (free version) *

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, laser source manufacturer: Bodor, Effective Tube Cutting Length: 6500mm/9200mm Laser Output Power: 6000w/3000w/2000w/1500w Effective Round Tube Cutting Diameter: Φ20-230mm Effective Square Tube Cutting Diameter: □20*20-□160*160mm Rcodpfx Adog Rgucs Rob Edge Length: 20-170mm Outer Circle Diameter: ≤230mm Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1.Bigger than Bigger The maximum cutting diameter of T series is 30%longer than the mainstream products in the market ; The maximum cutting weight is 100% heavier than the mainstream products in the market. 2.Chuck position control, torque control function The position control CNC self-centering chuck with independent intellectual property rights can automatically clamp material according to the input tube size; Position monitoring in torque mode to ensure that the thick tube is not loosened and the small tube is not deformed;Brand new dust-proof structure, long-lasting use without lagging. 3.Edge-seeking, center-finding Brand new function of edge-seeking, center-finding. Optimized edge-finding method and algorithm, higher cutting precision and stability

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 4,000 W, power: 4 kW (5.44 HP), warranty duration: 12 months, Equipment: documentation/manual, TRADE FAIR MACHINE AT A SPECIAL PRICE!!! SF 1530G 4KW Max 5G laser source with Precitec head. Also enables cutting of aluminium! This compact machine with a side pull-out table is space-saving, while still capable of processing large-format sheets. Cutting area: 1500x3000 mm. Also ideal for your business! Cutting up to 18 mm (mild steel S235) possible!! Rcedpfxeqwzuxe Ad Rjb

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 3,000 W, SF 1313G with 3 kW laser source, immediately available from stock in Büren! Includes installation and training / machine control in German. Working area 1300 x 1300mm. Weight approx. 2,000kg. Dimensions (L x W x H): 2985*2160*2000mm. The cutting system is particularly space-saving and even features an integrated control cabinet! Top machine, small and compact, fits into any production! Rcodpfxoiqnv Do Ad Rsb

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2023, laser power: 3,000 W, power: 3 kW (4.08 HP), Coil Cutter SF1503CH 3KW / Laser cutting system with automatic sheet metal feed Further details on request Redpfjt Huugex Ad Recb

Condition: used, Year of construction: 2012, CNC laser cutting machine Manufacturer: Microstep Type: FibreLas MSF 3001.15L Year of manufacture: 2012 CNC control: iMSNC Windows Laser operating hours approx.: 4,000-5,000 Laser power: 2.5 kW Working area: 3,000 x 1,500 mm Rcedpjx Eh Drjfx Ad Rob Sheet metal thickness, steel (max.): 15 mm Sheet metal thickness, stainless steel (max.): 8 mm Sheet metal thickness, aluminum (max.): 8 mm Operating temperature: +10 to +30 °C and max. 90% humidity (at 20°C) Extraction duct (left and right): outlet on the left, diameter 250 mm Laser source: IPG Ytterbium laser system YLS 2.5 kW Laser chiller: LC 170.01-A.3.5 Voltage: 400 V / 3P / 50 Hz Filter system: TEKA 4H 5.5 kW External dimensions of the entire system: approx. 10,400 x 3,610 mm 19526

Condition: new, Year of construction: 2025, Laser power: 6000 Watt Working range laser: 3050 x 1550 x 270 mm positioning speed X/Y/Z: 90 m / min simultanious: 120 m / min Max. workpiece weight: 1000 kg Max. steel: 20 mm Max. stainless steel: 16 mm Max. aluminium: 14 mm Max. copper: 8 mm Max. brass: 14 mm Length: 10050 mm Width: 5100 mm Height: 2600 mm Rcodjxq Rczjpfx Ad Reb Machine weight: 8100 kg Electrical connected load: 54 kW

Condition: good (used), functionality: fully functional, Year of construction: 2013, operating hours: 9,100 h, control type: CNC control, laser power: 4,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, pipe diameter (max.): 310 mm, pipe length (max.): 3,000 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, cutting speed: 5,000 mm/min, Equipment: cooling unit, dust extraction, emergency stop, nozzle changer, safety light barrier, TRUMPF TruLaser 3030 fiber (L49) (A1) 11/2013 4 kW 3. Technical Specifications Working area: 3000 × 1500 mm Operating hours (04/2026): Beam ON: 9,100 h Machine ON: 31,000 h 4. Maintenance & Condition - Maintained annually by TRUMPF - New IPC installed in 01/2026 (cost: 12K EUR; old IPC with broken network port can be used as a backup) 5. Standard Machine Configuration Working Area & Machine Design Working area: 3000 × 1500 mm Fully enclosed machine frame Enclosed beam guidance via light cable (LLK) Integrated cabinet with roller shutter Sliding roof Working area illumination Integrated electrical cabinets with interior lighting Drive & Motion System Torque drive combined with linear direct drives Automatic pallet changer in longitudinal direction Longitudinal conveyor belt Process Support Cooling unit Positioning laser diode Spray device Automatic nozzle cleaning Transport and installation equipment Cutting Technologies PierceLine FocusLine NitroLine PlasmaLine Microweld 6. Laser Standard Laser Configuration Integrated solid-state laser with 1 LLK output Pump diode excitation Laser power control Extended Laser Configuration TruDisk 4001 solid-state laser with 1 LLK output Upgrade capability for max. 1 additional LLK output on the TruDisk 7. Cutting Unit Standard Configuration Universal cutting unit Single cutting head strategy Protective glass against lens contamination Protective glass condition monitoring ControlLine: height control and sheet edge detection Extended Configuration Nozzle changer DetectLine: precise sheet position detection Copper cutting package (including cutting data for N2, O2) Brass cutting package (including cutting data for N2) 8. Control System & Software Operation & Programming TruTops Laser via network access (customer-provided PC required) Easy workshop programming Fast reproduction of jobs Integrated technology database Automatic shutdown function Programmable cutting gas / pressure selection Control System Sinumerik 840D SL control system 17" touch color display Software & Process Functions ContourLine Microweld FastLine FlyLine AdjustLine Remote teleservice via internet 9. Data Transfer & Interfaces Standard Interfaces USB interface RJ-45 network connection Extended Interfaces MDE interface 10. Safety & Environmental Systems Safety Features CE certification Light barriers Machine enclosure with certified viewing window (right-side door) Extraction & Dust Protection Multi-chamber extraction system Compact dust extraction unit Dust protection for equipment sheet metal 11. Material Handling & Automation Conveyor & Handling Systems Wide cross conveyor with tilting container Container positioned on the left side of the machine Automation Options LiftMaster retrofit 12. Tube Cutting Device / RotoLas Tube Processing Equipment Tube cutting device incl. 4 internal and external jaws (including electric roller roof, left-side sliding inspection door for enhanced visibility, and accessory trolley; integrated cabinet with roller shutter omitted) Components Automatic chuck External support for tubes up to 3 m (incl. 1 stepped roller) Base jaws for additional clamping sets Prism clamping set First base carrier with shifting device (longitudinal pallet changer) Rcsdpfsy S U N Rox Ad Reb Additional base carriers 2 × workpiece carriers D 15–310 mm Clamping claws (2 pcs.) 13. Warranty / Sales Notice No warranty Purchased as is.

Year of construction: 2013, operating hours: 19,392 h, condition: used, machine/vehicle number: 1683, (Beam in), TRUMPF CNC control, X-axis: 3,000 mm, Y-axis: 1,500 mm, laser power: 5 kW, loading and unloading table, chip/part conveyor. Rsdpfjy T Ny Tox Ad Rscb

Condition: excellent (used), Year of construction: 2014, 3 kW resonator power Rcjdpfx Asyxc Afjd Rsb

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Rcodshv U Tqjpfx Ad Rsb Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, Year of construction: 2020, operating hours: 31,623 h, laser power: 4,000 W, working length: 3,000 mm, working width: 1,500 mm, year of last overhaul: 2026, Machine Configuration: Standard Equipment: Machine - Working area: 3000 × 1500 mm - Enclosed machine frame - Longitudinal conveyor belt - Motion unit for high-precision processing - Gantry drive in combination with linear direct drives - Cooling unit for machine and laser (water-air) - Work area lighting - Positioning laser diode - Spray device - Automatic nozzle cleaning - Integrated control cabinets - Integrated cabinet - Enclosed beam guidance via laser light cable (LLK) - Machine status light - Ambient operating temperature 5 to 40 °C - Transport and assembly device TRUMPF Laser - Excitation via pump diodes - Laser power control Cutting unit - Single-head cutting strategy - Universal cutting unit with adaptive lens system - Protective glass - Online condition monitoring of protective glass Control - Fast reproduction - SINUMERIK 840D SL control - Ergonomic control panel with 21.5″ wide-screen multi-touch color display - Integrated technology data - Auto shut-off - Programmable selection of cutting gas/pressure - Microweld - Remote support interface - Production planning - Multi-sheet processing - Condition Guide - Cutting Guide Functions - AdjustLine - ControlLine - FastLine - FlyLine - FocusLine - NitroLine - PierceLine - Copper cutting package - Brass cutting package Data transmission - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety - CE marking - Light barriers - Multi-chamber extraction system - Machine paneling with certified viewing window, right door Extended Standard Equipment - Compact dust extractor - Support slats made of construction steel - Network installation via remote support Extended Machine Equipment Extended Laser Equipment - External solid-state laser TruDisk 4001 with 1 LLK output Additional Machine Functions - Drop&Cut - Integrated camera 1 for process monitoring Additional Cutting Packages - Highspeed Eco cutting package Extended Machine Equipment - Dust protection for device panel Data transmission - Wireless Operation Point Availability: approx. 6–8 weeks after receipt of order, at the earliest end of June 2026 Price: on request Current location: TRUMPF Reconditioning Facility Netherlands Rodey Sivfepfx Ad Recb The machine is currently undergoing reconditioning!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 72,700 h, machine/vehicle number: A1220A1012, laser hours: 34,021 h, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 12 mm, working length: 3,000 mm, working width: 1,500 mm, Laser cutting system + LiftMaster + 4 Stopa storage towers No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Control system: Sinumerik 840D SL Working area: 3,000 x 1,500 x 115 mm Speed: max. 140 m/min Accuracy: 0.1 mm Laser: CO2 laser TruFlow 5000 with optimized standby mode Laser power: 5000 W Sheet thickness, steel: max. 25 mm Sheet thickness, stainless steel: max. 20 mm Sheet thickness, aluminum: max. 12 mm STOPA storage system with 4 towers Year of manufacture: 2006 Load capacity: 3 t Sheet format: 1,250 x 2,500 mm Storage capacity: 63 t Storage height: 3,800 mm Storage locations: 21 MACHINE DETAILS Operating hours: 72,700 / 34,021 h Length: 9,300 mm Width: 4,600 mm Height: 2,200 mm Weight: 12,000 kg Voltage: 400 V 50 Hz Connected load: 105 kVA EQUIPMENT Torque drive in combination with linear direct drives Enclosed beam guidance Single cutting head strategy Cooling unit Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Position laser diode Spray system PierceLine FocusLine NitroLine PlasmaLine ControlLine ContourLine FastLine FlyLine AdjustLine Microweld Production plan Fast re-production Automatic shutdown Low-maintenance turbo radial fan Laser control TASC Laser cutting head with 250 mm lens Rsdsy U Nf Sepfx Ad Rjcb Universal cutting head quick-change system (UTI) with bus connection LensLine with condition monitoring CE marking Light curtains Multi-chamber extraction system Laser monitoring system Compact dust extraction system

Condition: good (used), functionality: fully functional, Year of construction: 2003, laser type: CO₂ laser, laser power: 2,700 W, X working area max.: 6500 mm Laser power: 2700 watts Control: SINUMERIK 840D Standard equipment TRUMPF loading unit: - Tube feeder for round, square, and rectangular tubes via buffer section with X-stop for tube lengths min. 3 m and max. 6 m - Semi-finished product length measurement - Transfer unit to the machine - Tube magazine with tube separation, alignment, and transfer to tube feeder, max. bundle weight 4000 kg Rcsdpfxsy Sanre Ad Reb - Good parts removal up to max. 3,000 mm with chip conveyor - Additional tube supports - Tube handling unit: Rotating and feed station: Rotating clamping unit with pneumatically actuated clamping jaws for tube lengths up to 6000 mm and tube diameters of d = 20 - 150 mm, 2 clamping ranges: d = 20 - 85 mm and d = 85 - 150 mm - Carriage unit with linear guidance - Feed station with motor drive, including connection for extraction - Tube support: Between tube support and traverse chuck, five automatically retractable support elements with form shells are provided - Traverse chuck: With a passage of d = 150 mm - The tubes are positioned via the clamping jaws centrally in the Y and Z axes relative to the rotational axis for the cutting process - 2 sets of clamping jaws for round, square, and rectangular tubes (simple design), clamping range 20 - 85 mm, 85 - 150 mm - Good part removal (unloading cabin for round and rectangular tubes) - Sorting options: 2 finished parts (front and rear), 1 flat - Scrap conveyor; programmable sorting; max. scrap length 300 mm (collection container, scrap belt) - Finished part length up to 3000 mm can be automatically unloaded (front and rear) Safety equipment: - Compact extraction unit Filter system designed for the separation of airborne particles produced during laser cutting of metals - Light barrier: Loading area secured by light barriers - Protective cabin: In the area of the cutting head, a Macrolon sheet metal combination is installed for laser radiation protection - Chip conveyor: Conveyor belt for discharging cut remnants - Operating manual

Condition: good (used), functionality: fully functional, Year of construction: 2011, laser power: 5,000 W, CNC Laser Cutting System TruLaser 5030 (L16) 5000 Watt X Working Area max.: 3000 mm Y Working Area max.: 1500 mm Z Working Area max.: 115 mm Control: Siemens Sinumerik 840D SL Laser Power: 5000 Watts Operating hours: 56,521 h Laser on time: 23,563 h Sheet thickness St. max.: 25 mm Sheet thickness Va. max.: 20 mm Sheet thickness Al. max.: 12 mm Standard equipment: - Enclosed machine frame with integrated laser unit - Motion unit for high-precision machining - Gantry drive in combination with linear direct drives - Enclosed beam guidance - Single cutting head strategy - Cooling unit KKW Riedel from 2003 - TFT color display - Longitudinal conveyor for small parts and waste - Automatic pallet changer - Work area lighting - Positioning laser diode - Oil spray device - Piercline - FocusLine - NitroLine - PlasmaLine - CO2 laser TruFlow 5000 - Maintenance-free turbo radial blower - Cutting head with 250mm lens - Universal quick-change unit (UTI) with bus connection - ControlLine: Height control and sheet edge detection Rjdpsy Saktofx Ad Rocb - SINUMERIK 840D - Automatic shutoff - ConturLine - FastLine - FlyLine - Microweld - USB interface - RJ-45 network connection - CE marking - Light barriers - Multi-chamber extraction system - Compact dedusting unit - High-speed cutting head 175mm focal length

Condition: used, Year of construction: 2001, Laser cutting machine Manufacturer: Messer Type: Multilas 6020 Year of manufacture: 2001 CNC control: Omnicom 160iL Working area: 2,000 x 6,000 mm Laser: Fanuc C4000 Laser power: 4000 W Connected load: 137 A Rcjdpfoyztrisx Ad Rjb ä19526