Used Perondi Laminating Installation for sale (9,877)

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Ibodpfx Afevy Aipeuoc Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Iedpfx Aoyx Uy Aefujbc Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: good (used), Year of construction: 2017, working width: 1,450 mm, 1450 Automatic backlapping machine Automatic sheet feeder Automatic carton feeder Automatic register with servo motor Output blanket Ibedpfx Afjurivvjuoc

Condition: used, Dimensions (LxBxH): 135 x 55 x 102 cm Boe-Therm Temp 300 – Oil Heating Unit Serial number: 83054 Type: Temp 300-36-4 VE General Data - Medium: Thermal oil - Oil capacity: 98 liters - Max. temperature: 300 °C - Heating capacity (kW): 36 kW - Voltage: 3 x 400 V / 24 V - Frequency: 50 Hz - Power consumption: approx. 54.8 A - Control system: Electronic panel with digital display and control buttons - Safety features: Overtemperature, oil level, and pressure monitoring Isdpfx Ajxpva Aefusbc Applications - Temperature control in plastics industry (injection moulding, extrusion) - Metal processing (heating systems, forming presses) - Woodworking (veneer presses, laminating presses) - Other processes requiring stable and high temperatures Function The unit heats thermal oil and circulates it through external circuits (such as moulds, press plates, or installations). This ensures a constant temperature up to 300 °C, with high precision and reliability. - Documentation available: No - CE certificate present: No - Serial number: 83054 - Transport dimensions: 1350mm x 550mm x 1020mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,000 mm, total length: 1,600 mm, total width: 1,600 mm, type of input current: three-phase, controller manufacturer: Union Dialog electronic control, compressed air connection: 6 bar, water pressure: 2 bar, Used 2018 Union MDMV 1 closed-circuit vacuum solvent degreaser, 50kg basket, Dialog control, Industrial Frigo chiller and 2 Safechem units. Manufacturer: Union Model: MDMV 1 Machine Type: Closed-circuit vacuum solvent metal degreasing / component cleaning machine Year: 2018 Condition: Excellent Includes: Industrial Frigo GR2A 30/Z industrial water chiller & 2 x SAFECHEM SAFE-TAINER chemical storage/handling units Machine Description Used 2018 Union MDMV 1 industrial metal degreasing and component cleaning machine, designed for precision cleaning of small and complex metal components using super-stabilised perchloroethylene (PCE / PER / tetrachloroethylene). This is a closed-circuit hermetic vacuum solvent cleaning system incorporating washing, rinsing, vapour degreasing, solvent recovery/distillation and vacuum drying within an enclosed process. Technical Specifications Maximum Basket Capacity: 50 kg Solvent Type: Perchloroethylene / PCE / PER / Tetrachloroethylene – C₂Cl₄ Solvent Load: Approx. 397 kg / 248 litres Main Electrical Supply: 400 V / 3 Phase / 50 Hz Installed Power: Approx. 23 kW Rated Current: Approx. 46 A Steam Pressure Requirement: Approx. 4–5 bar Compressed Air Requirement: Approx. 6–8 bar Water Pressure Requirement: Approx. 2–3 bar Floor / Ground Loading: Approx. 549 kg/m² Control: Union Dialog electronic control This particular machine also has a substantial integrated solvent-management system incorporating working and recovery tanks, solvent pump, fine filtration, swarf filtration, still/distillation system, condenser, heat exchanger, separator, decanter, vacuum pump and active-carbon treatment. Continuous Solvent Recovery A particularly useful feature of the MDMV design is the continuous solvent distillation/recovery system. Union states that MDMV machines operate under vacuum for rapid washing cycles and use continuous vacuum distillation with automatic final stripping of residues, allowing contaminated solvent to be regenerated and reused during production. Industrial Frigo GR2A 30/Z Chiller Included The machine is supplied with a 2018 Industrial Frigo GR2A 30/Z air-cooled industrial water chiller. Refrigerant: R407C Refrigerant Charge: Approx. 5 kg Electrical Supply: 400 V / 3 Phase / 50 Hz Rated Current: Approx. 23 A Nominal Water Pressure: Approx. 3.2 bar Temperature Set-Point Range: -10°C to +25°C Iedpfx Afsz Itlwsuobc Weight: Approx. 390 kg The complete installation includes: 2018 Union MDMV 1 metal degreasing machine 50 kg maximum basket capacity Union Dialog control Closed-circuit solvent cleaning system Vacuum cleaning/drying system Rotating / oscillating basket system Spray cleaning capability Immersion cleaning capability Solvent vapour degreasing Integral solvent distillation and recovery Working solvent tank Recovered-solvent / waiting tank Solvent circulation pump Fine solvent filtration Swarf filtration Vacuum pump Condenser Heat exchanger Water / solvent separation Decanter Active-carbon vapour treatment system Floor safety / spill-containment tank 2018 Industrial Frigo GR2A 30/Z industrial chiller 2 x SAFECHEM SAFE-TAINER chemical handling/storage units Stainless steel containment trays Use and maintenance handbook Electrical documentation Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith.

Condition: refurbished (used), functionality: fully functional, type of input current: AC, input voltage: 400 V, D&K JupiterAutomated B2 Laminator Refurbished and in excellent working condition. Key features and specifications: - Model: D&K JUPITER 5474 (automatic laminating machine). - Controls: PLC with touchscreen interface; daily and total counters provided. - Pressure and handling: adjustable pneumatic pressure; automatic sheet separation via a bursting roller; adjustable anti-blocking during production. - Heating: robust chrome-plated heated cylinder with oil bath. - Sheet size range: minimum 210 mm × 220 mm; maximum 540 mm × 740 mm. - Supported paper weights: 115 gsm to 450 gsm. Iedpezzmr Hofx Afuebc - Feeder: automatic feeder with a stated capacity of 80 cm. - Film thickness: from 22 µ to 42 µ. - Operating speed: 30 meters per minute. - Electrical: 400 volts (3 × 16 A); power:7 kW. - Physical: dimensions H = 1400 mm × W = 1950 mm × D = 1200 mm; weight 650 kg.

Condition: ready for operation (used), Sennerskov Hydraulic Plywood Press for Sale Heavy-Duty Oil-Heated Hydraulic Press – Fully Operational A robust and well-maintained Sennerskov hydraulic plywood press is offered for sale due to changes in production requirements. Originally manufactured around 1970, the press was extensively upgraded with a modern PLC control system in 2014 and has since been used successfully in plywood manufacturing. The machine is fully operational and can be inspected while running in production. Technical Specifications * Manufacturer: Sennerskov * Year of manufacture: Approx. 1970 * PLC control system installed: 2014 * Press format: 3,650 × 2,150 mm * Daylight opening: 270 mm * Hydraulic cylinders: 20 pcs. * Cylinder diameter: 110 mm * Maximum hydraulic pressure: 230 bar * Heating system: Thermal oil heated * Weight: Approx. 40 tonnes * Included equipment: * Mylar sheets * Feeding table Description This is an exceptionally heavy-duty industrial press designed for continuous plywood and laminated panel production. The machine features a highly rigid construction, ensuring uniform pressure distribution across the entire pressing surface. The press has been used for plywood production and is suitable for a wide range of applications, including: * Plywood manufacturing * Veneered panels * Laminated wood products * Furniture components * Specialty composite panels The press was modernized with a PLC control system in 2014, providing reliable and user-friendly operation compared to older relay-based systems. Condition * Fully operational * Can be inspected under power and in production * Press plates are in excellent condition * Press plates are flat and free from known damage or deformation * Well maintained throughout its service life Ibsdpfezd Shrox Afuec

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Sandwich panel construction Equipment: - Sink - Electric heater - Refrigerator Net: €9,151.26 / Gross: €10,890.00 Article number: BBC113372123.01 Technical data: • Brand: Blyss • Model: Comfort • Vehicle type: Site trailer • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 370 x 210 x 230 cm Ibsdezy Dfzopfx Afujc • External dimensions (L x W x H): 542 x 222 x 290 cm • Permissible total weight: 1,300 kg • Unladen weight: 830 kg • Payload: 470 kg • Chassis: High loader (wheels under the body) • Tires: 195/55R10C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Welded frame, hot-dip galvanized • V-drawbar • Chassis ALKO • Braked rubber spring axle • Ball coupling • Support wheel • Electrical system - 13-pin 12V connector • Downpipe supports with bracket - 4 pcs • Multiplex wood floor • Walls - 25mm sandwich panel, smooth laminate, RAL9016 color • Ventilation grilles - 2 pcs • Entrance door in the front wall • Entry step made of tread plate • Window in the rear wall with shutters • Socket • Switch box • 230V electrical installation • Double sockets - 3 pcs • Ceiling light - 1 pc • Table and benches for 4 people • Shelf above the window • Built-in refrigerator • Sanitary module (1.5-chamber stainless steel sink, faucet, 5 l boiler, 2 x 19 l canisters for clean and dirty water, soap dispenser, paper towel dispenser) • Clothes rail - 4 hooks • Curtain rod with fireproof curtain • Electric heater 2000W • Towing handles - 2 pcs _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transit license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair - workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale are subject to change -

Condition: used, Year of construction: 2015, Processing Specifications: Maximum processing width: 610 mm Minimum processing width: 210 mm Maximum draw length without interruption: 610 mm or 410 mm, depending on configuration Minimum draw length without interruption: 50 mm Maximum draw length with interruption: 1,220 mm or 820 mm, depending on configuration Minimum draw length with interruption: 100 mm Maximum cycle rate: 210 cycles/min Maximum line speed: 50 m/min Unwinder: Maximum reel diameter: Ø1,000 mm Maximum reel weight: 700 kg Web width with 48-inch unwinder: 410–1,220 mm Web width with 60-inch unwinder: 410–1,520 mm Processable Materials: Polyester laminates: from 40 μm BOPP laminates: from 40 μm CPP laminates: from 40 μm Nylon-based co-extruded films: from 50 μm EVOH-based co-extruded films: from 50 μm LD/LLD-based co-extruded films: from 50 μm BOPP film: from 30 μm Aluminum foil structures Coated paper Tyvek Maximum sealable film thickness: 150 μm Pouch Types: • TSP pouches • Stand-up pouches • Supported-film pouches Electrical Data: Power supply: AC, 3 Phase Available voltage: 20 / 240 / 380 / 415 / 480 V ±6% Frequency: 50/60 Hz Machine-specific supply: 380 V, 50 Hz, 3 Phase Machine electrical load: 35 kVA Pneumatic Requirements: Air consumption: 1,000 L/min at NTP Installed configuration air requirement: 3,000 L/min Minimum operating pressure: 6 kg/cm² Air supply must be free from moisture and dust Cooling Water: Water consumption: 20 L/min Required water temperature: 15–17 °C Standard Machine Features: • Servo-driven film indexing • Microprocessor-based control • Operator console for process parameter settings • Servo tension dancer assemblies with feedback control • Tail-feed-assisted film draw mechanism • Servo-driven reciprocating sealing system • Servo-actuated sealing bars • Progressive sealing and rapid seal-area cooling • Three-stage bottom sealing followed by cooling • Adjustable sliding sealing stations • PID temperature controllers with auto-tuning • Photo-registration mark scanner • Guillotine-type shearing station with servo fine adjustment • Trimming station with trim removal Iedpfx Afszqt Dnjujbc • Recipe memory for frequently used jobs • Adjustable sealing temperature, pressure and dwell time • Automatic stacking system

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Mark Andy Digital Pro3 PLUS Hybrid Digital Printing Machine with Semi-Rotary Die-Cutting Unit Installation: April 2024 Running meters: approx. 96,000 linear meters from April 2024 to April 2026 Web width: 330 mm Digital print width: max. 318 mm Flexo print width: max. 330 mm Digital resolution: 1200 x 1200 dpi Digital printing speed: approx. 23.5 m/min Digital printing: 4 colors Flexo printing: 2 flexo units Flexo drying: air-cooled LED UV Materials: BOPP, PET, PP, paper Digital Front End / RIP: PDF workflow Power supply: 240 V, 50–60 Hz Configuration and equipment: Mark Andy Digital Pro3 PLUS hybrid digital press 2 flexo printing units Semi-rotary die-cutting unit Latest generation flexo printing stations Semi-rotary die-cutting, expandable Unwinder for laminate / KP available Bypass for “flexo only” production or blank labels available Rewinding system Air-cooled LED UV drying PDF digital workflow Suitable for roll-to-roll label production Accessories included: 2 x printing cylinders: 80Z and 96Z 1 x Spilker Airboy Further accessories according to final confirmation Technical highlights: The machine offers a strong combination of digital printing, flexographic printing, and semi-rotary die-cutting in one compact production line. The uploaded technical specification confirms a maximum web width of 330 mm, a digital print width of 318 mm, 1200 x 1200 dpi resolution, and a digital production speed of 23.5 m/min. The layout drawing shows a complete production concept with unwind, semi-rotary die-cutting section, print station, digital engine, and rewind system, making the machine suitable for efficient short-run and medium-run label production. Iedpfx Asy Ul I Ajfuebc

Condition: used, Year of construction: 2018, GENERAL TECHNICAL DATA: Performance • Maximum speed: up to 400 m/min • Speed dependent on material properties and slitting conditions Web & Dimensions Working width: 40 – 400 mm Maximum web width: 400 – 450 mm Roll Specifications Maximum unwind roll diameter: 520 mm Maximum rewind roll diameter: 520 mm Maximum roll weight: 100 kg Core diameters: • Unwinding: 76 mm (3”), adapter 120 mm Ibedjyx Dc Tepfx Afuoc • Rewinding: 76 mm (3”), adapter 120 mm Materials • Paper • Aluminium • Laminates • Flexible films • Material thickness: - Films: 30 – 100 µm Electrical Data Main supply: 3 × 400 V, 50 Hz Auxiliary voltage: 220 V AC / 24 V DC Installed power: approx. 8 kW Pneumatic Requirements • Air pressure: 6 bar Machine Features • Center winding system with contact rollers • Shaft winding system (expandable mandrels) • Reversible winding direction • Edge guiding system (FIFE with SE46C sensor) • Glue table with 2 independent clamping bars Cooling System • Electrical cabinet cooling: Water cooling (HÄWA) Noise Level • Sound level: < 75–80 dB Safety • Floor scanner • Side protection fence

Condition: like new (used), Year of construction: 2016, ANCIMO AC-60 CL AUTOMATIC BUBBLE PACK THERMOFORMING AND SEALING MACHINE Manufacturer: ANCIMO Model: AC-60 CL Year of manufacture: 2016 Ibjdozcftgjpfx Afusc Condition: Excellent. Very few operating hours. Complete documentation available. GENERAL DESCRIPTION Automatic machine for the production of blister packs through thermoforming, filling, and sealing, designed to work with a wide variety of materials such as PVC, PVDC, polyethylene, aluminum, and laminated materials. The system allows for cavity formation through thermoforming, as well as subsequent sealing with upper materials such as aluminum, cardboard, or plastic film, resulting in a high-quality and attractive finished package. The machine is in excellent condition and has complete technical documentation. TECHNICAL SPECIFICATIONS • Thermoforming area: 400 x 200 mm • Heat sealing area: 400 x 200 mm • Installed power: 21 kW • Electrical power supply: 380 V III + N • Approximate dimensions: 7,400 x 963 x 1,900 mm COMPATIBLE MATERIALS • PVC • PVDC • Polyethylene (PE) • Aluminum • Cardboard • Laminated materials and other thermoformable materials EQUIPMENT INCLUDED • Automatic thermoforming unit • Heat sealing system • Trimming unit for individual blisters • Unwinder / film feeder • Rewinder for collecting trims and waste • Coil handling trolley • Coil loading trolley • Format changeover trolley DOCUMENTATION • Original manuals • CE marking • Electrical diagrams • Pneumatic diagrams ADVANTAGES • European manufacturing • Year 2016 • Very few operating hours • Excellent overall condition • Wide range of compatible materials • Format changes using a dedicated trolley • Available for immediate inspection

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, punching force: 22 t, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, sheet thickness (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Punching force: 220 kN Sheet metal thickness: 8 mm Sheet metal thickness for stainless steel: 4–6 mm Working area: 2,535 × 1,280 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Number of stations: 18 Number of clamping jaws: 3 Number of tool cassettes: 4 pcs Part chute for parts up to: 500 × 500 mm MACHINE DETAILS TFT color screen: 10.4" Floppy disk drive: 3.5" EQUIPMENT Rotatable tool holder Automatic repositioning system with pressure plate Automatic tool changer with 18 stations 3 clamping jaws Programmable part chute for parts up to 500 × 500 mm Programmable pressure plate with pre-selectable clamping force Good parts container Ibjdpfx Aez Izqujfuoc Tool spray lubrication 2nd lubricant tank Punch scrap extraction Chip bin Quick shut-off for hydraulics Order table TFT color screen 10.4" 3.5" floppy disk drive Graphic programming ToPs 2000 RJ45 network connection 2-beam safety light curtain Network connection including installation Multitool control Repositioning cylinder 4 tool cassettes

Condition: new, IPETRONIK Type: Interior Climate Simulation Box Technical data and description of the system: IPETRONIK Interior Climate Simulation Box (new and unused) The interior climate simulation box is designed to simulate the passenger compartment for testing in a recirculated air mode. It has a variable interior volume of 1.8 to 4 m³. The exhaust air volume flow from the front evaporator or the air conditioning unit is regulated and fed into the interior. The interior climate simulation box is used to test only rear evaporators installed in the passenger compartment. The insulating housing is mounted on an aluminum profile frame with rollers. A light is installed in the chamber. The box is protected against overtemperature by a safety thermostat (Esti). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed. The system is stopped. (TRIGGER TEMPERATURE: 80°C) Technical data of the insulating chamber: Dimensions: External: Width 1,860 mm Depth 2,360 mm Height 1,360 mm Internal: Width 1,700 mm Depth 2,200 mm Height 1,200 mm Insulation: 80 mm polyurethane rigid foam, CFC-free, U-value 0.27 W/m2K, building material class B1 according to DIN 4102 Technical data and description of the system: Connection: Tongue-and-groove system with embedded eccentric locking catches. Surfaces: Both sides: 0.8 mm stainless steel sheet 1.4301, ground, grit 320 Floor design: 2.0 mm stainless steel sheet 1.4301, SM diamond pattern, non-slip, Floor with a 90° upturned edge around the perimeter (approx. 15 mm), floor sheet flush with the wall sheet, Pressure distribution plate made of laminated wood, can withstand a load of 1,500 N/rubber wheel (contact area > 4 cm2), 30,000 N/m2 surface load, floor joints completely welded, welded stainless steel pipe as a floor drain, leading downwards through the floor Chamber door: Hatch door, 1-leaf, 800 x 1200 mm i.L., DIN left, heated door frame (230 V), Heater tapes silicone-free, 4-sided sealing profile made of EPDM, Iedpfozd Ukpex Afusbc Latch closure, lockable, emergency release, heated viewing window, 500 x 500 mm, 3-pane glazed, surface heating (230 V), frame heating (230 V), heating controlled externally, silicone-free edging Sliding wall: 1680 x 1180 mm, 80 mm polyurethane rigid foam, 0.8 mm stainless steel sheet 1.4301 on both sides, ground, grit 320, with protective film, closed with sheet metal on the reverse side (The rear wall can be adjusted manually and continuously to change the volume) Recirculation system: A heat exchanger (Systemair) for indirect temperature control is installed in the recirculation circuit for temperature control. The air is conveyed via a radial duct fan (Cosmo); heating is provided by an electric heater (Türk und Hillinger) integrated into the brine circuit. The heaters are continuously monitored by temperature monitors and limiters (Türk und Hillinger, Johnsson Controls). Cooling is provided by a secondary brine circuit with pumps (KSB) and a 3-way valve (Belimo). Installed electrical heating power 1 * 6kW. The mixing ratio is 50% water / 50% ethylene glycol. Power supply from station: =TME2++AS-QF21 Operating voltage: 400V Power: 17kW Rated current: 33A Fuse: 35A Control voltage: 24V DC /24V AC /230V AC PLC system: S7 300 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions by telephone.

Condition: good (used), functionality: fully functional, BDC 100T Hydraulic Moulding Press | Heated Platen Compression Press BDC 100T hydraulic moulding press for sale with heated platens. Approx. 100 tonne compression press for rubber, plastics, composites and laminating applications. Manufacturer: BDC Machine Type: 100T Moulding Press with Heated Platens Condition: Decommissioned. Good 100 Tonne Heated Platen Compression / Moulding Press This BDC 100T Hydraulic Moulding Press is a heavy-duty industrial press designed for heated platen moulding, compression moulding, forming, bonding and laminating applications. This machine is suitable for use in rubber moulding, plastics processing, composites, bonding, pressing, laminating and heated forming operations, making it a versatile addition to manufacturing, production and specialist fabrication workshops. Key Features 100 tonne hydraulic press capacity Heated upper and lower platens Heavy-duty industrial construction Suitable for compression moulding and heated platen pressing Ideal for rubber, plastics, composites and laminated materials Hydraulic pressing action for controlled force application Well-suited to production, R&D and workshop environments Machine Description The BDC 100T Hydraulic Moulding Press is designed for applications requiring high pressure and controlled heat. The heated platens allow materials to be formed, cured, bonded or compressed under consistent pressure, making the machine suitable for a wide range of industrial moulding and manufacturing processes. Ibodpfxjzi Hchj Afujc Hydraulic moulding presses of this type are commonly used for rubber moulding, plastic compression moulding, composite forming, gasket production, bonded components, laminating, hot pressing and specialist materials processing. Approximate Technical Specification General Manufacturer: BDC Machine Type: Hydraulic moulding / compression press Press Capacity: 100 tonnes Press Action: Hydraulic Construction: Heavy-duty industrial press frame Rams: 1 Guides: 4 Platen Type: Heated platens Platen Arrangement: Upper and lower heated work platens Working Applications Compression moulding Rubber moulding Plastic moulding Composite pressing Laminating Hot pressing Bonding applications Heated platen forming Production and workshop moulding work Heated Platen System Heating: Heated platen system Platen Size: 510 x 510mm Temperature Control: Fitted with platen temperature control Platen Use: Suitable for controlled heat and pressure applications Press System Power: Hydraulic press system Force: Approx. 100 tonnes Operation: Hydraulic pressing cycle Pump Size: 2.2kW Ram Diameter: 190mm Distance Between Guides: 540mm (Width) Max Daylight: 250mm Typical Configuration: Heavy-duty hydraulic moulding press with heated work platens Summary The BDC 100T Hydraulic Moulding Press is a 100 tonne heated platen compression press used for rubber moulding, plastic compression moulding, composite pressing, laminating, bonding and hot press applications. It features hydraulic pressing action and heated platens, making it suitable for industrial manufacturing, workshop production and specialist materials processing. Important Notice Note: Specifications and information provided in this listing are supplied in good faith; however, their accuracy cannot be guaranteed. Specifications are approximate.

Condition: like new (used), Year of construction: 2002, functionality: fully functional, type of input current: three-phase, cutting height (max.): 177 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, total length: 4,000 mm, overall weight: 870 kg, table height: 870 mm, Equipment: CE marking, saw blade guard, PAOLONI P3200A 4200mm cutting length panel saw | Scoring saw | Electronic control | Year 2002! Professional PAOLONI P3200A panel saw from 2002 – a high-quality Italian industrial machine designed for precise cutting of solid wood and wood-based panels. The P3200A model stands out with its exceptionally rigid construction, precise guidance of the sliding table, and electronic control, which has made it a popular choice in professional carpentry workshops and furniture factories for many years. The machine is ready for operation and is ideal for both individual and serial production. KEY ADVANTAGES - Year of manufacture: 2002 - Italian manufacture: PAOLONI - Sliding table length: 3800 mm - Electronic machine control - Scoring saw - Saw blade tilt: 0–45° - Precise aluminum sliding table - Massive cast iron worktable - Professional upper guard with dust extraction - Ideal for furniture boards, MDF, HDF, plywood, and solid wood - Machine ready for operation TECHNICAL DATA - Manufacturer: PAOLONI (Italy) - Model: P3200A - Year of manufacture: 2002 - Cutting length: 4200 mm - Aluminum sliding table length: 3800 mm - Sliding table travel: approx. 3500 mm Ibedpfszxxi Esx Afuec - Cutting width with parallel guide: up to 1300 mm - Cutting length: 4200 mm - Tilting unit: 0–45° - Scoring saw: YES - Electronic control: YES - Control display: YES - Main saw blade diameter: up to 500 mm (according to P3200 series documentation) - Saw blade bore: 30 mm - Scoring saw blade diameter: 125 × 20 mm - Maximum cutting height at 90°: up to 177 mm (depending on the saw blade used) - Maximum cutting height at 45°: up to 133 mm - Cast iron table dimensions: 1150 × 680 mm - Table height: 870 mm - Installed power (nameplate): 8.05 kW Weight: 870 kg EQUIPMENT - electronic control panel - scoring saw - tilting saw unit - 3200 mm aluminum sliding table - parallel guide - upper guard with dust extraction - safety switch - cast iron worktable APPLICATION The machine is intended for: - furniture production - carpentry workshops - door production - window production - cutting laminated boards - MDF - HDF - plywood - solid wood - wood-based materials The machine is in very good technical condition. The solid Italian construction ensures high operational efficiency, high cutting accuracy, and years of trouble-free operation. PRICE: VAT MARGIN BRUTTO OR VAT 23% INVOICE WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: used, Year of construction: 2016, Laminate Coating System Manufacturer: Ibedpfx Afezuzkqsuoc Type: Master PUR-1400 Year of manufacture: 2016 Technical data Professional PUR hot-melt laminating system for acrylic, PET, PVC, HPL, and CPL sheets General description The MASTER PUR-1400 is a professional, high-performance laminating system designed for single-sided lamination of sheets with PUR hot-melt adhesive. The system is suitable for continuous industrial production and offers excellent surface quality with low adhesive consumption. It is designed for the production of high-quality furniture panels, interior design components, wall panels, and decorative panels. Suitable substrates The machine is suitable for laminating: MDF Chipboard Plywood PVC sheets Gypsum boards Other wood-based panels Compatible surface materials The system is designed for processing the following materials: Acrylic sheets (high gloss & super matte) PET film PVC film HPL laminate CPL laminate Decorative paper Technical data Working width: 1,400 mm Maximum sheet size: 2,800 x 1,300 mm Sheet thickness: 2-40 mm Production speed: 5-17 m/min Throughput: 3-5 sheets/min Maximum productivity: up to approx. 1,200 sheets per 8-hour shift Installed motor power: 21.49 kW Heating power: 51.7 kW Overall dimensions of the machine: approx. 16 x 2.5 x 2 m Required installation area: at least 6 x 22 m System configuration The production line includes: Automatic feeding system with roller conveyor Brush cleaning system for sheets Infrared preheating oven (IR) 3-roller PUR adhesive application system Feeding station for decorative material Laminating press with pressure rollers Take-away conveyor 208-liter melting tank for PUR hot-melt adhesive Advantages Excellent laminating quality Uniform PUR adhesive application Suitable for high-gloss and super-matte acrylic surfaces Low adhesive consumption Stable and reliable operation in industrial series production High production efficiency Easy operation and maintenance Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, type of input current: AC, input voltage: 400 V, D&K PROTEUS fully automated B1 laminating machine. Production speed: 35 m/min. Max sheet size: 760 x 1050mm. Min sheet size: 210 x 220mm. Stock range: 115 - 600gsm. Jogger delivery Ibedpfez D Uansx Afuoc

Year of construction: 2020, condition: used, functionality: fully functional, BioAir SafeMate ECO 1.8 Class II Biological Safety Cabinet – 1.8m Laboratory Workstation Manufacturer: BioAir Model: SafeMate ECO 1.8 Equipment type: Class II Microbiological Safety Cabinet Nominal size: 1.8 m Condition: Used Location: Ireland Quantity Available: 2 Description: Available for sale is a BioAir SafeMate ECO 1.8 Class II microbiological safety cabinet, designed for laboratory applications requiring controlled airflow and biological particulate containment. The SafeMate ECO series features an electrically operated sliding front safety window, stainless steel internal work surfaces and HEPA filtration. The cabinet is designed to provide a controlled working environment for appropriate microbiological laboratory procedures, subject to correct installation, maintenance and certification. With a spacious 1.8 m working width, this unit is suitable for laboratories requiring a larger working area for research and routine laboratory operations. Key Features Class II microbiological safety cabinet. Large 1.8 m cabinet configuration. Stainless steel internal working area. Ibsdpjz I Dmrofx Afuec Electrically operated sliding front window. HEPA filtration system. Designed for controlled airflow and biological containment. Suitable for research, biotechnology and pharmaceutical laboratory environments. Designed for laboratory workflows requiring a controlled working environment. Keywords: BioAir SafeMate ECO, SafeMate ECO 1.8, biological safety cabinet, Class II biosafety cabinet, Type A2 cabinet, microbiological safety cabinet, HEPA filtration, laboratory equipment, pharmaceutical laboratory, biotechnology equipment, microbiology laboratory, scientific equipment, 1800mm safety cabinet

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) Iedpfx Afjugpwnoujbc GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: good (used), Year of construction: 2006, functionality: fully functional, working width: 330 mm, MPS Model: EF 330/8 Year of manufacture: 2006 Printing technology: UV Flexographic Printing Number of printing units: 8 colors Web width: 330 mm class Application: Labels / self-adhesive materials / film applications Condition: Very good operational condition Production status: Currently in daily production _____ PRINTING CONFIGURATION 8 x Flexographic Printing Units The machine is equipped with eight flexographic printing stations and offers a highly flexible production platform for professional label production. Suitable applications include: • Process color printing Ibedpfezzym Rsx Afuec • Spot colors • Varnishes • Special coatings • Paper labels • Film labels • Self-adhesive materials • Front-side printing • Reverse-side printing • Multi-process label applications _____ GEW UV DRYING SYSTEM The machine is equipped with a professional GEW UV curing system. The installed GEW UV technology provides reliable curing performance for UV flexographic inks and varnishes and is well-established in industrial label production. The dedicated GEW UV power supply units are installed together with the press and form part of the existing production setup. _____ EXTENSIVE INLINE CONFIGURATION This MPS EF 330/8 is not simply a basic 8-color flexographic press. Its extensive web path and additional inline modules provide a high level of flexibility for demanding label applications. The current configuration includes: • 8 flexographic printing stations • GEW UV curing system • Unwinding and rewinding system • Web cleaning system • Corona treatment system • Web guiding system • Turn bar / reverse-side printing capability • Inline lamination station • Rotary converting / die-cutting section • Longitudinal slitting equipment • Web / print inspection system • Electronic machine control • Extensive exhaust and extraction system • Safety systems and emergency stops This configuration makes the press suitable for both standard self-adhesive label production and more complex multi-process applications. _____ TURN BAR / REVERSE-SIDE PRINTING A major advantage of this machine is the integrated turn bar and web turning configuration. This allows the material web to be turned during production and enables printing or processing on the reverse side of the substrate. This functionality is particularly useful for: • Backside printing • Multi-layer labels • Peel & reveal constructions • Promotional labels • Technical labels • Special label applications _____ INLINE LAMINATION _____ WEB & PRINT INSPECTION _____ OPERATIONAL STATUS The machine is: ✓ Fully functional ✓ Currently in daily production ✓ Complete and professionally installed ✓ Available for inspection under production conditions ✓ Supplied with extensive tooling ✓ Suitable for professional label production A production test can be organized by prior appointment. _____ CONDITION Technical Condition ★★★★★☆☆ – 8 / 10 Overall Maintained Condition ★★★★★☆☆ – 8 / 10

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Ibsdoyqr Sxspfx Afuoc

Condition: new, PVC Line – YILMAZ TK 503 Single-Head Welding Machine + YILMAZ CA 601 Corner Cleaning Machine – Year 2023 The line consists of two professional machines designed for welding PVC profiles and subsequently cleaning the welded corners: YILMAZ TK 503 single-head welding machine YILMAZ CA 601 corner cleaning machine Together, these two machines make it possible to complete the PVC profile welding cycle and subsequently remove welding beads and processing residues from the welded corners. 1. YILMAZ TK 503 - Single-Head Welding Machine for PVC Single-head welding machine designed to join PVC profiles at continuously adjustable angles ranging from 30° to 180°. The machine allows the operator to select the welding bead thickness between the standard 2.0 mm configuration and the reduced 0.2 mm configuration. The melting and welding times, pressure and temperature can be adjusted according to the profile specifications. Main features Continuously adjustable welding angle from 30° to 180° Standard 2.0 mm or reduced 0.2 mm welding bead Maximum profile height: 165 mm Automatic start and completion of the welding cycle Adjustable temperature from 0 to 300°C Separate profile clamping by foot pedal Quick mould-change system Support arms for long profiles Quick replacement of the Teflon coating Iedpjz D Dhzefx Afujbc Mobile machine frame Included accessories Profile support arms on both sides Electric foot pedal Technical specifications Installed power: 1.5 kW Power supply: 230 V AC, single-phase Frequency: 50/60 Hz Air consumption: 20 l/min Operating pressure: 6–8 bar Dimensions: 600 × 1,915 × 1,400 mm Net weight: 113 kg Gross weight: 128 kg 2. YILMAZ CA 601 - Corner Cleaning Machine for PVC Corner cleaning machine designed for finishing PVC profiles welded at 90°. The machine cleans the upper and lower surfaces and the external corners, accurately removing welding beads and residues generated during the welding process. The hydropneumatic system, PLC control and vertical and horizontal clamps ensure stability and precision throughout the working cycle. Main features Cleaning of PVC profiles welded at 90° Cleaning of upper and lower surfaces and external corners PLC control system Hydropneumatic operation Maximum profile dimensions: 130 × 180 mm Minimum profile dimensions: 30 × 30 mm Pneumatic blade-change system Profile clamping by vertical and horizontal clamps Profile centring system Adjustable cleaning tools for laminated and non-laminated profiles Single or multiple cleaning cycles Automatic cycle start and stop Included accessories Compressed-air gun Support table Two milling cutters for cleaning white profiles Technical specifications Installed power: 1.2 kW Power supply: 400 V AC, three-phase Frequency: 50/60 Hz Maximum cutter diameter: 215 mm Bore diameter: 32 mm Air consumption: 36 l/min Operating pressure: 6–8 bar Dimensions: 1,375 × 2,405 × 1,255 mm Net weight: 176 kg Gross weight: 210 kg

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: Mini 76 TH, type of input current: AC, input voltage: 400 V, working width: 760 mm, AUTOBOND MINI 76 TH automatic laminator. 2015 Model. Fully refurbished. Max sheet size: 76 x 105cm Ibsdpfx Afozpw Izouoc Min sheet size: SRA4. Speed: 60 m/min. 22 million impressions. Heidelberg Feeder. Tool temp YCU. Jogger delivery. Optional post heat system.

Condition: like new (used), Year of construction: 2020, FIBRO FIBROTOR EM12 Rotary Indexing Table 6+ units available Manufacturer: FIBRO Model: FIBROTOR EM12 Type: Rotary Indexing Table / Indexing Drive Condition: Installed in IMA line that was never commissioned. Almost new condition Application: Automated production, assembly, machining, handling and indexing systems EM.12.0220.9.152.08.0.0.3 0008143150-010-01 Description FIBRO FIBROTOR EM12 rotary indexing table, designed for high-precision intermittent rotary positioning in automated manufacturing and production machinery. The FIBROTOR range is widely used in industrial automation applications where accurate, repeatable indexing and positioning of workpieces or tooling is required. The EM12 provides a robust mechanical indexing solution and is suitable for integration into automated assembly lines, machining systems, transfer machines, packaging equipment and other special-purpose machinery. Ijdpfsz Nahbsx Afuobc Key Features: FIBRO FIBROTOR EM12 rotary indexing table Precision intermittent rotary indexing Robust industrial construction Suitable for automated production machinery Repeatable positioning Designed for continuous industrial operation Suitable for assembly, machining, handling and transfer applications Compact mechanical indexing solution FIBRO quality engineering Keywords: FIBRO, FIBROTOR, EM12, rotary indexing table, indexing table, rotary indexer, indexing unit, rotary table, indexing drive, automation, industrial automation, machine tool, assembly machine, transfer machine, CNC, manufacturing, production line, industrial machinery, precision indexing, mechanical indexer.