Used Panasonic Mdf-C2156Van for sale (237)

Year of construction: 2020, condition: used, Dimensions (WxHxD): approx. 17x14x7.5 m, including 8 AutoStore Robots R5 AS-99188-DDG, Conveyor Ports 5.1-Narrow, 3 Carousel Ports 3.0, 3 Carousel Ports Frames, 1 Grid (loading structure), 1 Guards (upper railing, service platform, stairway, crane, MDF cladding, approx. 387 m³, software, approx. 8,400 storage bins, internal dimension: 603x403x310 mm, with Pick To Light, for details see drawing. ATTENTION!!! The dismantling of the storage system must be completed by the end of May. Isdpfxeyztibs Aagoat

Condition: used, Year of construction: 2026, Special Price - Showroom Machine Garbsen Our Machine Concept WL 6 The Weima High-Performance - Shredders with their flexible application possibilities can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) into fuel chips, achieving enormous volume reduction of material for bulky items. Functionality: The machine is equipped with a large feed hopper and can be fed with a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees continuous and cost-effective material feeding without the need for manual assistance. The hydraulically controlled pusher supplies the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependently controlled. The internal pusher guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended in a cardanic way to avoid lateral forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concavely ground, aggressive, and 4-times reversible knives / cutting crowns are located in milled knife pockets on special knife holders; this patented system guarantees high throughput performance, low energy consumption, and optimum discharge of shredded material by reducing the cutting gap between counter knife and rotor for the first time. The screen located under the rotor determines chip size (10 - 100 mm ). A hydraulically opening screen basket is available upon request. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft. Precise cut at high throughput with profiled V-rotor The specially developed by WEIMA V-rotor can be used universally and is made from solid material. Its aggressive material intake with up to two rows of knives guarantees high throughput with low power requirements. It can be equipped with hardened steel cutting knives with edge lengths of 30 mm and 40 mm. These can be turned several times in case of wear, which drastically reduces maintenance costs. Intuitive operation via Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. We use only high-quality components – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the pusher stroke or stop ensure high throughput. The built-in overload protection also prevents defects on the machine. Technical Specification WL 6Feed opening 800 x 1,250 mmHopper capacity 0.9 m³Rotor length 800 mmRotor diameter 256 mmDrive power 22 kWRotor speed 90 rpmMax. number of knives 42 piecesKnife type and size concave / 40 x 40 mm, cutting crownsScreen perforation 10-60 mmPaint finish WEIMA Standard RAL 2022 / 7016Connection value 400 V +/- 5% / 50 HzWeight approx. 1,600 kgIncluding: - Control cabinet* (Rittal) incl. electrical control (Moeller/Siemens) and S Iedpfjy D E Tdox Aagsat

Condition: new, The cost-effective single-shaft shredders of the ZWS series enable the realization of a wide range of size reduction tasks, such as a preliminary stage for subsequent briquetting, the production of wood chips for combustion, or re-introduction into the particleboard industry. Depending on throughput and material, the machines can be customized to meet specific requirements. Typical material for shredding includes: - Large panel and board offcuts - Wooden pallets - Waste from joinery workshops - Packaging wood - Construction and demolition timber - Veneers, MDF, and particleboard Iaodeyr I Ilspfx Aagot

Year of construction: 2024, condition: new, Any shape or form may be cut, engraved, or 3D milled using this universal CNC router. The Wattsan A1 6090 can create décor, furniture, advertising, and packaging. This machine is compatible with several materials, including wood, MDF, chipboard, acrylic, plexiglass, PVC, composite, and aluminum. The Wattsan A1 6090 has a working area of 600x900x200mm. Its basic design includes a T-slot table and a 2.2 kW spindle. Two-phase stepper motors are responsible for accurate motions. Ijdpfx Aaeih Sb Negjat You can give our managers a call for additional details! Wattsan A1 6090 characteristics Working area: 600x900 mm Spindle: 2.2 kW Machine size: 1260 x 1500 x 1662 mm Weight: 340 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: good (used), Year of construction: 2017, Multi-Sheet Machining For Maximum Output Automatic Loading System CNC Bandsawing, Routing & Drilling CNC Control Of The Bandsaw Movement +/- 90 Degrees The MZ Pluris is recognised as the machine of choice for all sofa and chair frame manufactures. The machine can work with OSB, Plywood, MDF, Chipboard (good quality), solid wood and also some composite materials. It has a number of key advantages over standard CNC nesting machines that include the possibility to stack multiple sheets high eg 5 x 12mm thick sheets, thanks to the use of the bandsaw sheet yield is much better, no vacuum is used so the machine is able to cut small shaped parts without difficulty and lastly cut parts are coming off on to the side discharge conveyor as the machine is still working, thus maximising machine output. Increased working capacity of 2550mm 1550mm Sheet size = 1220 x 2,440mm (8' x 4 ') and 1525 x 1525mm Standard equipment / features: CNC bandsaw specification - Maximum depth of curve 800mm - Minimum radius of cut 50mm - Maximum cutting height 100mm - Automatic angling of blade +/- 90 degrees - Blade size 5900 x 13mm - Automatic sawblade tensioning - Cast aluminium saw pulleys 900mm dia - Self braking motor 11kw CNC router specification: Ijdpfxjtqfv Io Aagsat - Maximum working height / cutting depth 60mm - Electro spindle power S6 9KW - Variable rotation speed 7000 - 24000 rpm - HSK 63F tool holder Fence / grippers / supports: - Programmable pusher fence with 6 x pneumatic panel grippers - 8 x panel support arms General: - Automatic centralised lubrication system consisting of 3 x oil pumps - Internal conveyor belt for removal of dust / waste cuts - Free standing electrical control cabinet with PC and keyboard - Hand held remote control CNC vertical drilling unit: - Maximum drilling depth 70mm - 5 x independent drilling spindles in line. (Drills not included). - 1.7kw motor Plus package: - 5 position automatic tool changer - Automatic movement of clamps and support arms - set through the program Lifting table: - 4 screw - Capacity 2550 x 1525mm - Max load capacity 3000kg approx - Max panel pack height 700mm - PIT REQUIRED Year - 2017 CE Serial nr - 22/2017

Condition: new, Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Power: 18,5 kW Shaft length: 550 mm Shaft diameter: 222 mm Shaft RPM: 120 rpm Number of cutting knives: 14 Granulation: 10-30 mm Capacity: up to 4 m3/h (depending on the wood) Material discharge opening: 160 mm Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) Filling opening: 946 x 567 mm Dimensions L/W/H: 1880/1120/1670 mm Weight: approx. 1250 kg 2 years warranty or 2000 working hours Advise used machines: Iodpfxogw Sxzo Aagsat • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Year of construction: 2024, condition: new, Big CNC router machine for a big production. With it, you can produce doors, cabinets, tables, chairs, gaskets, LED signs, souvenirs, and 3D relief on wood. Great choice for those who seek no limits. Iasdpfx Aasih Sdgegst This machine is used for cutting and engraving wood, MDF, chipboard, acrylic, plexiglass, PVC, composite, and aluminum. Wattsan M1 2030’s planetary gears provide high speed, and the reinforced gantry and bed guarantee no vibrations during the work. Together, they provide precision. You can give our managers a call for additional details! Wattsan M1 2030 characteristics Working area: 2000x3000 mm Spindle: 6 kW Machine size: 2700x3540x1780 mm Weight: 860 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2024, Reduce retooling by 4-5 times with pneumatic auto-change and a tool height sensor! Convenience in operations. This CNC router machine can cut and engrave wood, MDF, chipboard, acrylic, plexiglass, PVC, composites, and aluminum. The Wattsan M3 1325 has an increased thickness of housing that allows it to work with heavy workpieces. It can manufacture parts for light industries, interior and exterior decorating, souvenirs, outdoor advertising, working with soft metals and stone, woodworking, and furniture production. You can give our managers a call for additional details! Wattsan M3 1325 characteristics Working area: 1300x2500 mm Ijdorywtqepfx Aagoat Positioning precision: 0.03 mm Spindle: 7.5 kW Machine size: 1960x3350x1740 Weight: 830 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2024, This is a medium-sized CNC router designed for cutting, engraving, and 3D milling. It can work with plywood, wood, MDF, chipboard, plexiglass, plastic, soft metal, and aluminum. Equipment for effective work operates at all hours of the day and night. The Wattsan A1 1616 has a 3 kW spindle as standard. The spindle lifting height is 20 centimeters. The machine has a working table of 1600x1600x200 mm. The solid-cast bed of the machine offers the required stiffness and vibration resistance. You can give our managers a call for additional details! Wattsan A1 1616 characteristics Working area: 1600x1600 mm Spindle: 3 kW Machine size: 2260x2130x1550 mm Weight: 590 kg Iodpjryv Hhsfx Aagsat Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2024, functionality: fully functional, Any shape or form may be cut, engraved, or 3D milled using this universal CNC router. The Wattsan M1 6090 can create décor, furniture, advertising, and packaging. This machine is compatible with several materials, including wood, MDF, chipboard, acrylic, plexiglass, PVC, composite, and aluminum. The working table of the Wattsan M1 6090 is 600x900x200 mm. A 2.2 kW spindle and a T-slot table are part of its basic design. Compared to the A1 6090 model, the processing depth may be increased by 20% in a single pass thanks to the 300 mm portal height. You can give our managers a call for additional details! Wattsan M1 6090 characteristics Working area: 600x900 mm Iaodpfx Aaorvh Ebjgjt Spindle: 2.2 kW Machine size: 1380 x 1500 x 1890 mm Weight: 400 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2024, This is a medium-sized CNC router designed for cutting, engraving, and 3D milling. It can work with plywood, wood, MDF, chipboard, plexiglass, plastic, soft metal, and aluminum. Equipment for effective work operates at all hours of the day and night. The Wattsan M1 1616 has a 4.5 kW spindle as standard. The machine has a working table of 1600x1600x200 mm. Its gantry has increased rigidity and allows the use of 1 to 12 spindles. Heavy workpieces can be operated thanks to that as well. You can give our managers a call for additional details! Wattsan M1 1616 characteristics Working area: 1600x1600 mm Spindle: 4.5 kW Machine size: 2300x2140x1780 mm Weight: 590 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Iajdpfxsrywhuo Aagjt Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2021, functionality: fully functional, V-motion classic vacuum lifting device with slewing jibLoad capacity: 250 kg Overall height: 3.8 m Lower edge of jib: approx. 3 m Iaodjy R D Hijpfx Aagjt Reach / Outreach: 4 m Slewing range: 250° Suitable for horizontal and vertical material handling. Excellent for commercially available flat sheets and panels (MDF from 8 mm thickness). A pneumatic tilting device supports the operation of the unit. The tilting range is within 90°. The vacuum is generated by an ejector using pneumatics. Details: - Lifting speed: chain hoist, 0–10 m/min - Lifting height: 2 m - Chain length: 3.5 m - Operating pressure: 7 bar (filtered compressed air required) - Air consumption: 11 Nl/s

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Iaodpfx Aaotk It Sogst Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: excellent (used), Year of construction: 2020, 2020 SERON 1310 PRO Milling Machine Working Area: 1300 × 1000 mm. Z-axis Working Range: 300 mm. Control Type: CNC. Drive: Double-sided. Electrospindle: HITECO. Maximum Power: 12 kW. Rotation Speed: up to 24,000 rpm. Toolholder Standard: HSK63. Bearings: Ceramic. Cooling System: Air (fan). Machine S/No: 26431/19082020. The 1310 PRO model allows for efficient machining of soft metals, plastics, composites (carbon, alucobond, dibond), wood, OSB and MDF boards, PVC, HPL, and glass. Isdpfx Aasy Sy N Njgjat

Condition: used, Year of construction: 2004, functionality: fully functional, Vecoplan VAZ 800 XL Shredder | 22 kW | Year of construction 2004 | Good condition | incl. spare knives For sale is a used, fully operational single-shaft shredder from Vecoplan, model VAZ 800 XL. The machine is ready for immediate use and can be inspected and tested on site at any time. ⚙️ Technical Specifications Manufacturer: Vecoplan Iajdoy Exchepfx Aaget Model: VAZ 800 XL Year: 2004 Drive power: 22 kW Rotor diameter: approx. 370 mm Power supply: 400 V / 50 Hz Serial number: 9292010 Feed hopper height: approx. 2500 mm Feed hopper dimensions: Length 1800 x Width 1000 mm All cutting crowns are present and, due to regular maintenance, the shredder shaft runs smoothly and reliably. ✅ Features & Highlights ✔️ Automatic fill level control (starts only when sufficient material is present) ✔️ Quick-change knife system Knives can be used on three sides Currently, the knives still have usable life left ✔️ New counter knife included ✔️ Heavy-duty industrial design (Vecoplan standard) ✔️ Maintenance-friendly construction ✔️ Ideally suited for continuous operation 🪵 Areas of application Perfectly suitable for: - Wood waste / solid wood - Chipboard / MDF - Production waste - Plastics (depending on configuration) 🛠️ Condition Technically: perfect / fully functional Appearance: used, with normal signs of wear The machine was last running in production without any issues 📍 Inspection & Collection Location: 36367 Wartenberg Inspection under power is possible Loading assistance can be provided This machine is offered as a used unit. Sale is made under exclusion of any liability for material defects. The machine is sold as inspected and under exclusion of any warranty. The seller assumes no guarantee for operational condition, performance, or suitability for any particular purpose. Disclaimer Any liability for material defects is excluded. This does not apply to damages resulting from injury to life, body, or health, or in cases of willful intent or gross negligence by the seller. Dismantling and Transport Dismantling of the machine is the responsibility and at the expense of the buyer. The buyer assumes all costs and risks for disassembly, loading, and transport. Transfer of Risk Risk passes to the buyer at the latest upon commencement of dismantling or loading. Other No liability is assumed for hidden defects. All details regarding the machine (e.g. year, operating hours, technical data) are given to the best of our knowledge, but without guarantee.

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, The Autobyte 3602D is the automated cutting system for professionals who demand speed, accuracy, and efficiency. Equipped with premium Morso guillotine blades, it delivers perfect 45° corners in wood, plastic, and MDF—consistently, every time. With a capacity of over 500 frames per hour, you can significantly increase your production output. At the same time, you drastically reduce material waste: just 1 mm cutting loss per cut, compared to up to 6 mm with conventional saws. Iodpfx Aew U D E Esagsat Smart automation features include: Automatic loader handling up to 13 lengths Precision clamping system for maximum stability Integrated splitter to sort cut pieces and remove waste automatically Full control via a Mitsubishi touchscreen and PLC system, combined with reliable SMC pneumatics. The result: higher output, lower waste, and consistent premium quality—exactly what your production line needs.

Condition: new, Year of construction: 2026, Wrapping machines are designed for machine wrapping with stretch film of goods stored on pallets. They are especially recommended where it is required to obtain very high efficiency and low labor and financial expenditures in the process of packaging, so in distribution centers, wholesalers, production plants, as well as in smaller companies. The new model - has a touchscreen control panel, menus in languages: Polish, German, English, French Technical parameters: MASH: - Height :2.4m TABLE Table diameter - 1650 mm Max dimension of pallet - 1200x1200 mm Max weight of the pallet - 2000 kg Type of table: flat Adjustable disc speed: 3-12 R.P.M. Capacity: up to 30 pallets /1h. Automatic return to the starting position Powerful chain drive Soft start and end function POWER 230 V 50 Hz HEAD TYPE (depending on the model) - Pre stretch - Mechanical film stretch up to 350% (optional) - Film stretch: from 1m to 4m - Components from reputable companies including PANASONIC photocell Isdpfotpvbmjx Aagsat ADDITIONAL FUNCTIONS - Very easy operation - Working hours counter - Pallet counter - Cycle pause function - Stretching on the head modes and not on the pallet - Adjustable wrapping speeds

Year of construction: 2026, condition: new, Wrapping machines are designed for machine wrapping with stretch film of goods stored on pallets. They are especially recommended where it is required to obtain very high efficiency and low labor and financial expenditures in the process of packaging, so in distribution centers, wholesalers, production plants, as well as in smaller companies. Technical parameters: MASZT - Standard mast allows you to wrap a pallet up to 2400 mm high - depending on the model - Automatic return to the starting position - Top plate for additional stabilization of the pallet TABLE - Table diameter - 1650 mm - Max pallet dimension - 1200x1200 mm - Max weight of pallet - 2000 kg - Type of table: flat - Adjustable disc speed: 3-12 R.P.M. Isdjtpvbbspfx Aageat - Capacity: up to 30 pallets /1h. - Automatic return to the starting position - Powerful chain drive - Soft start and end function POWER 230 V 50 Hz HEAD TYPE (depending on the model) - Pre stretch - Mechanical film stretch up to 350% (optional) - Film stretch: from 1m to 4m - Components from reputable companies including: PANASONIC, SIEMENS ADDITIONAL FEATURES - Very easy operation - Hour counter - Pallet counter - Cycle pause function - Stretching on head modes and not on pallet - Adjustable wrapping speeds

Condition: excellent (used), Year of construction: 2015, Year of production: 2015 Range: 2239 mm Control: Panasonic WG III Iasdpfetu Tp Sox Aagjt Lifting capacity: 80 kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, overall weight: 16,000 kg, power of feed motor: 37,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 10 Spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12–120 m/min, Spindle configuration: 1- Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2- Right (11 kW) 3- Left (11 kW) 4- Top (37 kW) – with fully automatic straight jointer 5- Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6- Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 8- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 9- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Iajdpfxex Svm Rj Aaget 10- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Short infeed table, 1.3 meters (4 rollers), with 2 powered rollers above the table and 2 powered rollers in the table (both table rollers can be lifted). Table height adjustment with electronic digital readout. Incl. 2 heavy-duty side pressure rollers, 140 mm diameter, pneumatically actuated. Base supports, height 320 mm, for a table height of 1190 mm. Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table surfaces). Special coating to protect table plates, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm, located in the area of the right and left spindle.

Condition: good (used), Year of construction: 2019, CNC machine with fixed table and dual drive gantry, five axis interpolating electrospindle. Particularly suitable for SIPS panels, woodworking, plywood, MDF, plastics and thermo formed prodcuts. 6120mm x 1605mm Working field in X / Y axis 6850mm X axis stroke 1970mm Y axis stroke 1080mm Z axis stroke Max height / panel passge 700mm C axis rotation + / - 360 degrees 12kw electrospindle with programmable speeds from 500 - 22,000 rpm 12 Position automatic toolchanger Auxiliary 2 position toolchanger 250m3/hr vacuum pump 2 Field phenolic working table suitable for vacuum cups Iasdjvpv Nbopfx Aaget Hoist points to fix jigs [ series of threaded holes on table for mechanical fixing ] Set of 3 disappearing stops OSAI Series 10 CNC control including [ for example ] PC with Windows XP [ or higher ] Interactive programming Paramteric programming 3D interplolation Cutter radius compensation Extraction requirements 2200m3/hr Weight 5235kg Year - 2019 CE FULL ORIGINAL SPECIFICATION SHOWN IN IMAGES

Condition: good (used), Year of construction: 2007, functionality: fully functional, The Italmeccanica MacPower 6TE/480/1600 is an industrial brushing machine / surface processing line for panels and sheet elements (e.g., MDF, chipboard, wood). The unit is designed for brushing, structuring, and finishing panel surfaces in woodworking and furniture manufacturing processes. Main features and parameters (typical for the MacPower series): • Working width: approx. 1600 mm • Multi-head brushing system (longitudinal and transverse brush groups) • Capable of processing both surfaces and panel edges • Designed for continuous operation in production lines • Robust industrial build, high efficiency, and consistent processing quality • Industrial 3-phase power supply • Typical applications: surface structuring, finishing of furniture panels, door components, wood-based boards The MecPower/MacPower series by Italmeccanica is used in industrial panel brushing lines. Machines are often equipped with multiple brush groups and a working width of 1600 mm, allowing the processing of large sheet elements. Italmeccanica MacPower 6TE/480/1600 Machine type: brushing / structure sanding machine for panels Manufacturer: Italmeccanica (Italy) 🔧 Working data • Working width: 1600 mm • Material pass-through height: approx. 130 mm (typical for the series) • Minimum piece length: approx. 400 mm • Number of working units: 6 • Top units: 2 • Side units: 3 • Longitudinal/transverse units: combination of longitudinal and transverse brushes • Edge processing: yes • Rollers/brushes: multizone horizontal and transverse brushes ⚡ Electrical data • Installed power: approx. 11–17 kW (depending on configuration) • Power supply: 3-phase 400 V, 50 Hz • Extraction system: dust extraction ports on the working units 📏 Dimensions and weight (typical for 1600 version) • Length: approx. 3300 mm • Width: approx. 2450 mm Iedpfsykzigox Aageat • Height: approx. 2250 mm • Weight: approx. 1500–3000 kg (depending on equipment)

Condition: used, Year of construction: 2007, functionality: fully functional, For sale: vertical CNC machining center Weeke Optimat BHX 500, year 2007, designed for drilling, milling, and slotting panel materials in the furniture industry. The machine allows fast and precise processing of components and is suitable for both series and custom furniture production. Technical specifications: Model: Weeke Optimat BHX 500 Year: 2007 Machine type: 3-axis continuous CNC machining center CNC control: WoodWOP (Homag / Weeke) Maximum workpiece length: approx. 3050 mm Maximum workpiece width: approx. 1200 mm Maximum workpiece thickness: 80 mm Minimum workpiece length: approx. 200 mm Minimum workpiece width: approx. 70 mm Equipment: Drilling head with multiple vertical and horizontal spindles 96 drilling spindles (48 top, 48 bottom) 36 vertical tools 12 horizontal tools Slotting saw Milling cutter (top and bottom) 125 mm saw, rotatable 90° Automatic clamping workpiece transport Applications: Drilling for dowels and fittings Milling and slotting Processing of particleboard, MDF, HDF, plywood, and solid wood Advantages: Ability to process two pieces simultaneously, significantly increasing productivity Quick setup and workpiece change High precision in drilling and milling Ideal for manufacturing case furniture, kitchens, cabinets, and interior fittings Condition: Iedpfx Aaeywgb Negsat Machine is regularly maintained and operational Test run possible upon inspection Delivery: June 2026

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 3,686 mm, travel distance Y-axis: 1,555 mm, travel distance Z-axis: 100 mm, number of axes: 3, This 3-axis BUSELLATO easyjet 5.12 was manufactured in 2013, designed for high-accuracy operations in panel processing. It features a CNC-controlled spindle, optimized for drilling, milling, and nesting, with a travel range of 3686mm on the X-axis and 1555mm on the Y-axis. Ideal for wood, MDF, plywood, and composite panels. Consider the opportunity to buy this BUSELLATO easyjet 5.12 CNC Wood Machining Centre. Contact us for more information about this machine. Additional equipment • Material Handling: Optimized for wood, MDF, plywood, and composite panels • Software Integration: Nesting software integration for optimized cutting patterns • Safety Features: Safety enclosures and interlocks Machine Benefits Technical Machine Benefits Iodpfx Aoyaipteagoat • Precision: high-accuracy operations for drilling, milling, and nesting • Control system: cnc interface (busellato proprietary or compatible) • Control system: cnc interface (busellato proprietary or compatible) • Clamping: vacuum or mechanical clamping for panels • Spindle: cnc-controlled, suitable for drilling, milling, and nesting • Tool changer: automatic tool changer (depending on configuration) Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2010, This IMA Advantage 310 edgebander was manufactured in 2010. It handles workpieces from 150 mm in length and 65 mm in width, with thicknesses up to 60 mm. It's equipped for various materials including chipboard and MDF, using melamine, paper, foil, or veneer edges. Features include a gluing unit, cutting unit, and a buffing unit, enhancing finishing processes. Consider the opportunity to buy this IMA Advantage 310 edgebander. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Minimum workpiece length: 150 mm • Minimum workpiece width: 65 mm (with max thickness of 25 mm), 150 mm • Workpiece thickness: min. 8 mm, 12 mm with profile scraper blades; max. 40 mm (mfa 08346), 60 mm (skf) • Smallest workpiece: 65 x 300 mm / 150 x 150 x 19 mm • Machining allowance per workpiece edge: 0 - 5 mm • Workpiece shape: rectangular • Material: chipboard, mdf • Surface material: direct coating (melamine resin paper), paper, foil, veneer Extra Information Edging Material Roll material without foil: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm Max. edge cross-section: 150 - 180 mm² Cut-to-length edge strips: Strips: 3.0 - 8.0 mm Max. strip cross-section: 520 mm² Edge height: Min. 12 mm, max. 65 mm Max. upper edge overhang: 2 mm Edge profiles: Paper edge: Approx. 0.4 mm, bevel 15° Plastic edge up to 3.0 mm, depending on radius tool Milling strip flush up to 8 mm Machine Constant workpiece projection from the chain track: 35 mm + edge thickness Max. cutting cross-section: 520 mm² Passage width: Min. 65 mm (with 35 mm projection) Min. workpiece length in feed direction: 150 mm Basic height (top edge of chain track): 940 mm Aggregate side: Left in feed direction Pneumatic connection: Approx. 7 - 8 bar Joining Unit 08.379 and Blow Nozzle 2 motors 4 kW each, 9000 rpm Gluing Unit 283.1513 Glue dispenser 0.8 l, 60 mm high Suitable for hot melt or PU glue With single roller/strip magazine, roller diameter 800 mm 3 main pressure rollers and 3 pressure rollers Cutting Unit 08.415 Pneumatically swivels to 0° or 8 2 motors, 12,000 rpm 2 HM cross-cut saw blades Copy Trimming Unit SKF-L 4 motors, 12,000 rpm Profile length in throughfeed direction: Max. approx. 50 mm Workpiece thickness: Max. 60 mm Working speed: Max. approx. 20 m/min Distance between 2 workpieces: Min. approx. 400 mm Profile Scraper Unit 08.519 For rescraping an upper and lower milled quarter circle profile Self-Scanning Scraper Unit 08.521 For removing hot melt adhesive residue from the edge area of the top and bottom of workpieces Buffing Unit 08.617-2 Upper and lower motor: 180 W, 1400 rpm 2 polishing wheels 50 x 160 x 19 mm Iodpox U U Dtofx Aagjat