Used Ott Tornado T/41231 for sale (71,277)

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° Dcsdpod Tyvxefx Ahgei - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 11

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, 2 units SSI Schäfer LogiMat-2425 from 2019 for sale. Very sparsely used and in as good as new condition. SSI Schaefer is one of the world's largest companies in warehouse automation and their Vertical Lift Module "LogiMat" has gained a lot of ground in the world in recent years. These 2 lifts come with a good height of 9 950 mm - if you have enough ceiling height in your warehouse or factory, it means the possibility of really compact storage on a small floor surface. If necessary, the machines can be lowered to the desired height. The trays have a width of 2 425 mm and can handle a load of 300 kg, the combination means that the vertical storage lifts also work for businesses with heavy goods. The VLM's come with the option "LogiTilt", a function where the shelf can tilt in the opening of the machine and thus improve the ergonomics for the picker. In addition to the tilt function, the lifts also come with a laser pointer. If the machines are connected to your ERP or WMS, the laser pointer can indicate which picking location goods should be picked from. The machines can be purchased separately or in pairs. Available with a delivery time of 4-6 weeks. Shipping and installation is additional. These vertical lifts are configured with 3 225 mm wide shelves but with slightly shallower shelves than standard, 625 mm, this is often appreciated by warehouse / factory staff for ergonomic reasons. Each shelf provides 2.02 m² of storage space and with 34 shelves per lift, this gives about 68.5 m² of storage space on a floor area of about 10 m² per machine. The Vertical Lift Modules are each equipped with a 17" touch display and without external software, the control panel can be used to manage shelves, handle user management, optimize shelf placement and monitor the weight of each shelf. The lifts can also be connected to a WMS/ERP if necessary. These objects come with the option "LogiGate"; doors in the opening that open/close when the elevator machines pick up/drop off shelves. This option reduces dust and dirt in the machine and lowers the noise level when the lift is running. The items can be purchased separately or in packages of 2 or 3. Available from the end of October 2023. Shipping and installation not included. Dsdpfjy D St Rsx Ahgoci Manufacturer: SSI Schäfer Manufacturing year :2019 Model: Logimat SLL 3225-625-6950/200 Height: 6 950 mm Width vertical lift module / tray: 3 735 mm / 3 225 mm Depth vertical lift module / tray: 2 712 mm / 625 mm Number of trays: 34 trays per unit Maximum weight per tray: 200 kg Electronics: 25 A, 400 V

Condition: used, machine/vehicle number: 007684, Max. panel width: 1200 mm Max. panel length: 3000 mm Max. panel stack height from the ground: 1800 mm Dodpjy Nkttofx Ahgjci Movement system: suction cups.

Year of construction: 2004, condition: not inspected (used), functionality: unexamined, plate length: 3,000 mm, plate width: 1,200 mm, stack height: 1,600 mm, TECHNICAL DETAILS Dcjdsyxnquepfx Ahgei Maximum panel width: 1,200 mm Maximum panel length: 3,000 mm Maximum stack height from floor: 1,600 mm EQUIPMENT Motion system: Suction cups Vacuum pump The machine is sold and delivered in its actual and legal condition ('as seen and approved'), based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and is responsible for installation, securing, and use of the machine at the destination. External reference: 7684

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 250 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle bore: 52 mm, spindle speed (max.): 1,810 rpm, spindle speed (min.): 65 rpm, spindle motor power: 2,200 W, total height: 1,650 mm, total length: 1,900 mm, total width: 830 mm, type of input current: three-phase, overall weight: 790 kg, Universal Lathe TORNADO 400 × 1000 – 2.2 kW / 400 V With Digital Readout and Work Light Key Features Precision spindle roller bearings The spindle is equipped with high-precision roller bearings that ensure excellent machining accuracy and reliable operation even during intensive use. High-quality hardened and ground steel gears in the headstock transmission All gears inside the headstock are made from high-grade steel, hardened and ground to ensure smooth, quiet operation and long service life. Easy and quick gearbox operation The intuitive gearbox design allows quick and convenient speed changes and easy adjustment of machining parameters. Powerful drive motor The machine is equipped with a sufficiently powerful motor that ensures stable performance even under heavy loads. D1-5 spindle mounting system The D1-5 camlock spindle system allows quick and secure installation of chucks and other accessories. Wide range of thread cutting capabilities The machine enables cutting of various thread types (metric, inch, module, and others), making it a versatile tool for many applications. Technical Specifications 🔩 Turning Capacity Maximum swing over bed: 400 mm Swing over cross slide: 250 mm Swing in gap: 520 mm Distance between centers: 1000 mm Maximum workpiece length (chuck + tailstock): ~920 mm 🛠️ Slides and Travels Compound slide travel: 125 mm (0.02 mm accuracy) Cross slide travel: 240 mm (0.04 mm accuracy) Longitudinal travel: 750 mm (0.2 mm) ⛓️ Drive and Speeds Main motor power: 2.2 kW / 400 V Coolant pump power: approx. 40 W Spindle speeds: 18 ranges (I/II) 65 – 1810 rpm 🧰 Threads and Feeds Metric threads: 0.4 – 7 mm Inch threads: 4 – 60 T.P.I. Module threads: 0.4 – 3 mm D.P. threads: 8 – 84 D.P. Longitudinal feed range: ~0.053 – 1.291 mm/rev Cross feed range: ~0.011 – 0.276 mm/rev 🧱 Construction and Spindle Bed width: 218 mm Spindle bore: 52 mm Spindle taper: MT6 Spindle nose: D1-5 CAMLOCK Tailstock: Quill diameter: 50 mm Quill travel: 110 mm Taper: MT4 📏 Dimensions and Weight Machine dimensions (L × W × H): approx. 1900 × 830 × 1650 mm Weight: approx. 640 – 790 kg (depending on configuration) Standard Equipment 2-axis digital readout (optical scales) 3-jaw chuck 200 mm + internal jaws set 4-jaw chuck 200 mm Faceplate 280 mm Steady rest Follow rest Dead centers MT4 – 2 pcs. Spindle reduction sleeve MT6 / MT4 Change gears set Coolant system Working light Dcodpfxeyr Ihlo Ahgsi Lubrication pump Chuck key and toolpost wrench Set of service tools Safety guards compliant with CE standards Operating manual (English) CE Declaration of Conformity Delivery to the customer is possible. Shipping cost is calculated individually by the transport company.

Year of construction: 2019, condition: ready for operation (used), A hardly used Netzsch rotary lobe pump is available. Flow rate: 30m³/h, max. pressure: 2bar, max. temperature: 80°C, design: block design, number of poles: 6, operating hours: approx. 5h. Documentation available. On-site inspection is possible. Dcsdpfx Aewtg Hqjhgei

Condition: used, Year of construction: 2000, operating hours: 17,200 h, functionality: fully functional, machine/vehicle number: T 90077, turning length: 450 mm, turning diameter: 230 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 450 mm, rotational speed (max.): 4,000 rpm, overall weight: 2,800 kg, - Year of manufacture: 2000 - Single owner, used in-house - Fully functional, under power, ready for demonstration - Operating hours: 17,200 h - X-axis travel: 200 mm Dcjdpfx Aoxgtrkshgsi - Z-axis travel: 450 mm - Turning diameter: 230 mm - Turning length: 450 mm - Spindle speed: 4,000 rpm - Spindle bore: 52 mm - Spindle motor power: 11 kW - Control: Fanuc 21 i - Tailstock - 12-station VDI 30 turret - Chip conveyor - Weight: 2,800 kg Net price ex-works, unloaded, from location Luckenwalde (Germany), excluding transport

Condition: used, Year of construction: 1995, TORNADO 200 year of manufacture 1995 GE FANUC Series O-T control system Maximum machining diameter: 254 mm Maximum turning length: 400 mm Axis travels X : 215 mm Z : 400 mm Maximum spindle speed: 3500 rpm Spindle motor power: 18.5 kW Konik Tool system : VDI 40 Tool head : 12 positions Dimensions of the machine length : 2455 mm Dcedpfx Asua Uyuehgsi width : 1420 mm weight : 3000 kg

Condition: used, functionality: fully functional, Rems Tornado 2010 Pipe Cutting Machine Dcodpfx Asrzu T Aohgji Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2026, The CORMAK TORNADO 460x1000 universal lathe is a heavy-duty, high-precision machine designed for versatile metalworking operations, including turning, drilling, threading, and polishing, making it suitable for workshops and industrial production. Key Advantages Versatile applications – external and internal cylindrical and conical turning, drilling, reaming, polishing, and threading across a wide range of sizes. Dodpfx Ahevzzffjgjci Powerful 5.5 kW motor – smooth operation even under heavy loads. Large spindle bore ø82 mm – allows machining of long and heavy shafts. 2-axis digital readout with optical scales – improves accuracy and operator comfort. Removable bridge – accommodates workpieces up to ø690 mm × 240 mm. Rigid cast-iron construction – 300 mm wide hardened and ground bed minimizes vibrations and ensures long service life. Construction and Technology The lathe’s foundation is a massive, precisely machined cast-iron bed ensuring maximum stability. The spindle, equipped with a D1-8 spindle nose and supported by reinforced bearings, provides high rigidity and smooth operation at speeds ranging from 25 to 2000 rpm. Hardened and ground gears in the spindle drive offer durability and quiet operation even under continuous use. Precision and Performance 2-axis digital readout (X & Z) – precise tool positioning with repeatable results. Joystick for rapid traverse – simplifies cross-slide and top-slide movements, reducing setup and finishing times. Thread dial indicator – easy thread engagement without manual calculation of turns. Standard Equipment 3-jaw chuck 250 mm with left/right jaws 4-jaw chuck 320 mm with left/right jaws Fixed and live centers 2-axis digital readout (optical scales) Reducing sleeve MK7 → MK4 Change gears, coolant system, work lighting Fixed center MK4, lubrication system, tool set CE-compliant guards, manual (PL), declaration of conformity Optional Equipment Turret head MK4 Drill spindle MK4/B16 Drill chuck 3–16 mm / B16 HSS-Co5 cobalt drill set 1–13 mm Coolant ES-12 1L Taper turning attachment Technical Specifications Parameter Value Swing over bed ø460 mm Swing over cross-slide ø274 mm Swing in gap (diameter × width) 690 × 240 mm Center height 230 mm Distance between centers 1000 mm Bed width 300 mm Max tool post size 25 × 25 mm Total cross-slide travel 290 mm Total top-slide travel 120 mm Spindle bore ø82 mm Spindle nose D1-8 Spindle taper ø90 mm (1:20) Number of spindle speeds 12 Spindle speed range 25–2000 rpm Lead screw diameter & pitch ø35 mm × 6 mm Inch threads (TPI) 2–112 TPI (60) Metric threads 0.1–14 mm (41) Threads per inch (gear) 4–112 D.P. (50) Gear modules 0.1–7 M.P. (34) Longitudinal feed 0.054–3.04 mm/rev (42) Cross feed 0.037–2.048 mm (42) Tailstock quill travel 120 mm Tailstock quill diameter ø60 mm Tailstock gear module MT #4 Spindle motor power 5.5 kW Coolant pump motor 0.09 kW Machine dimensions (L×W×H) 2170 × 1040 × 1340 mm Net/Gross weight 1750 / 2000 kg

Condition: new, Year of construction: 2026, CORMAK 360 is a new, improved model of the most popular metal lathe. Among other things, the tool holder cover, spindle bearing system, new digital readout have been improved. Suitable everywhere small scale turning has to be done. A NEW, IMPROVED MODEL !!! High-quality and reinforced spindle bearing system Dcjdpfeiz S R Nox Ahgsi New cover system compliant with CE standards The latest model of digital axis reading Reinforced and modernized lathe base with drawers for tools and an extendable chip tray Machine characteristics Reinforced, ribbed surface of the lathe's bed provides maximum reduction of vibration, Additionally precisely ground, hardened bed Digital readout of the axis in standard equipment Equipped with a large spindle bore of 52 mm Also features high-quality and high-end spindle bearing system Efficient machining due to two automatic feeds and equipment with a roller and a draft bolt Hardened wheels in the spindle gear Adjustable overload clutch on pull shaft Feed choice lock: through a screw or a roller The possibility of machining the full range of threads without replacing the gear wheels The removable bridge enables the working of elements with an increased diameter Retractable chip tray and tool drawers for better and efficient work Technical data Swing over bed 360 mm Swing over cross slide 220 mm Swing over gap 490 mm Maximum turning length over gap 168 mm Bed width 187 mm Turning length in dead centres 970 mm Spindle tip D1-4 Spindle bore 52 mm Spindle speed 90–2000 rpm Number of spindle speeds 8 Longitudinal feed range 0.055–1.291 mm/turn Transverse feed range 0.014–0.345 mm/turn Maximum tool dimensions 16×16 mm Metric thread 0.4–7 mm Inch thread 4–60 T.P.I. Tailstock quill diameter 32 mm Tailstock quill tip MK3 Motor power 1.5 kW Pump power 0.1 kW Weight 570 kg Dimensions 1890×720×1500 mm Equipment Axes digital readout 200 mm 3-jaw lathe chuck 200 mm 4-jaw lathe chuck Drive plate Steady rest Follow rest Reduction sleeve Dead centre Cooling system Lighting Set of change gears Thread indicator/gauge Handling tools Lathe on a base User manual EC declaration of conformity Factory new machine, under warranty For more information you can visit our web page.

Condition: new, Year of construction: 2026, Industrial metal lathe CORMAK TORNADO 460x1500 - 2x larger casting and solid cast iron bed construction, equipped with a 12-speed gearbox with a powerful 5.5 kW/400V induction motor - maximum torque, large spindle passage 82 mm. Main advantages: - Versatile applications: The lathe is ideal for various tasks, such as turning internal and external surfaces, cones, metric, inch, modular and DP threading, polishing, drilling and broaching. - Stable construction: The 300 mm wide cast iron bed has been hardened and precisely ground, which ensures high vibration reduction and stable working conditions even under heavy loads. - Digital precision: The device is equipped with a digital readout on two axes (longitudinal, transverse), which visualizes the exact values ​​of shifts on the screen thanks to optical measuring lines. - High-quality spindle: Reinforced bearing system in the spindle and large passage of 82 mm guarantee optimum efficiency during work. The set also includes a 3-jaw lathe chuck with a diameter of 250 mm and a 4-jaw chuck with a diameter of 320 mm, a 5.5 kW motor. - Efficiency and productivity: The rapid longitudinal and transverse feed system on the joystick significantly shortens the machining time, and the hardened and ground gears in the spindle gear ensure durability and reliability for years. - Wide possibilities of threading: Thanks to the threading function (metric, inch, modular and DP), right and left, and the possibility of changing parameters without the need to replace gears, work becomes faster and more convenient. The range of supported threads includes, among others, metric (41) from 0.1 to 14 mm, inch (60) from 2 to 112 T.P.I., modular (34) from 0.1 to 7 M.P. and DP (50) from 4 to 112 D.P. - Precise counting of threads: The lathe is equipped with a thread turning clock, which allows for quick setting of the support in the original position after unscrewing the lead screw nut. - Ergonomics and ease of use: The intuitive control panel on the gear allows for quick adjustment of the spindle speed and automatic feed. - Machining of large elements: The replaceable bed bridge allows for turning large elements with a diameter of up to 690 mm and a length of 240 mm (with the bridge removed), which increases the range of the device's capabilities. Technical parameters: Turning diameter over bed ø460 mm Turning diameter over cross slide ø274 mm Turning diameter in recess diameter x width 690 mm x 240 mm Tipper height 230 mm Dsdpfx Ahevzzqbjgjci Distance between centers 1500 mm Bed width 300 mm Maximum knife cross-section 25 x 25 mm Total cross slide feed 290 mm Total upper slide feed 120 mm Spindle bore diameter ø82 mm Spindle nose D1-8 Spindle socket (taper) ø90 (1:20) Number of spindle speeds 12 Spindle speed range 25-2000 rpm Screw diameter and threads ø35mm x 6mm Inch threads Pitch Pitch 2-112 TPI (thread per inch) (60) Metric threads 0.1-14mm (41) teeth per inch gear pitch dia. 4-112D.P. (50) Gear modules 0.1-7M.P. (34) Longitudinal feed 0.031-1.7mm/rev. (42) Cross feed 0.014-0.784mm (42) Total tailstock bearing liner feed 120mm Tailstock bearing liner diameter ø60mm MT gear modules no. 4 Spindle drive motor 5.5kW Coolant pump motor 0.09kW Machine dimensions (LxWxH) 2720x1040x1340mm Weight 2445kg

Condition: as good as new (ex-display), Year of construction: 2016, pressing force: 40 t, We offer an immediately available Hydraulic spotting press with 40 tons pressure. Due to a change of warehouse location, this press is offered at a very competitive price. Pressure 40 t Table length 1000 mm table width 700 mm Machine weight approx. 9 t space requirement approx. 4000 x 4400 x 1800 mm stroke length 1050 mm installation height 1200 mm table rotatable 180 degrees table load max. 5 t forward speed 100 mm/sec return speed 100 mm/sec working speed adjustable from 0 to 10 mm/sec. Main cylinder 1 piece table extendable for 1050 mm table tiltable 50 degrees upper tool tiltable 180 degrees Traversing speed of the table 25 mm/sec Pressure, travel and speed adjustable via monitor- control adjustable robust machine body with solid welded construction, manufactured according to DIN 8651 low maintenance and reliable due to robust technology maintenance balcony with marine ladder entire range of motion secured by Sick light barriers Table moves out of the machine to the front and straightens up by 45 degrees on request. Control cabinet to the left of the machine Monitor control with 200 memory locations REMOTE function for remote maintenance Operating manual, technical documents, documentation in German language CE certificate monitor SIEMENS 9" Motors from WEG Hydraulics from Bosch Rexroth Interior lighting Operator panel on swivel arm Two-hand operation on movable stand USB interface for data transfer Siemens control system Light sensors Sick 1250 mm ram plate can be folded down hydraulically, moves up to approx. 175 degrees Dedpfx Ashtm E Nohgjci Columns and cylinders are made of SAE 1045 tool steel (identical to German standard C 45) and are induction hardened and chrome plated on the outside. The linear measuring rod informs the control system of the position of the ram in each case. The travel distance, the upper stop point and the changeover point at which the press is to switch from idle to working speed, as well as the end position to be approached, can be entered easily and quickly via the monitor control. The working speed can be set in 1 mm/sec increments from 0 to 10 sec and in 10 mm increments from 10 to 155 mm. The control monitors the secured areas, all hydraulics and the pump. The control system is housed in a separate control cabinet. The actual press operation is carried out via a control panel mounted on a swivel arm, which reduces the distances involved.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 1,835 h, machine/vehicle number: 2006671, power: 36.5 kW (49.63 HP), load capacity: 450 kg, empty load weight: 13,320 kg, fuel type: diesel, working length: 22,500 mm, Equipment: all wheel drive, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working height: 22,500 mm Load capacity: 450 kg Maximum side load: 400 N Dcsdpfx Aoziz Uxshgji Permissible inclination: 5° MACHINE DETAILS Operating hours: 1,835 h Drive: All-wheel drive Engine: Diesel Kubota External reference: SL18426SP

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 836 h, machine/vehicle number: ME108831, power: 1.2 kW (1.63 HP), load capacity: 200 kg, lifting height: 10,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 10,000 mm Maximum load capacity: 200 kg Maximum lateral load: 400 N Dcjdpfx Aheziz Tuegsi Maximum permissible inclination: 3° MACHINE DETAILS Operating hours: 836 h Total weight: 2,735 kg External reference: SL16147SP

Year of construction: 2018, condition: as good as new (ex-display), Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine Machine stand, emergency stop pushbutton and brake, and suction unit Dsdpfoiiyuqex Ahgoci Also other models available from stock! Inquire about the current stock.

Year of construction: 2019, condition: as good as new (ex-display), Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Dodpfxjiiyq He Ahgeci Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine Also other models available from stock! Inquire about the current stock.

Year of construction: 2017, condition: as good as new (ex-display), Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Dodpfeiiyr Ssx Ahgeci Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine Machine stand, emergency stop pushbutton and brake, and suction unit

Year of construction: 2020, condition: as good as new (ex-display), High performance Belt grinding device height adjustable 0-90°. Maximum usable face grinding area Belt adjustment with fine adjustment Longitudinal stop for material guide Perfectly balanced and low vibration Connection on both sides for dust extraction Ø 50 mm Motor protection switch with undervoltage release Fixed stop 1 Sanding belt standard (brown), grit 80 1 grinding wheel 250 x 40 x 51 mm, grit 80 Spark protection Connection cable with CEE plug with base frame, integrated suction and brake Also other models available from stock! Inquire about the current stock. Dodpoiiywzefx Ahgjci

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox Dcodpfxsb A R H Ts Ahgei -Number: max. 11 drill bits -1x drill bit: Right-hand rotation, 32 mm spacing -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm -Number: 4 drill heads available -Price: per piece -Dimensions: 350/100/H90 mm -Weight: 5 kg

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 19 drill bits -Recording: M8 -right/left: rotating alternately Dcsdpfx Aheb A R Igsgsi -Drill bit spacing: 32 mm -Number: 2x drill heads available -Price: per piece -Dimensions: 635/75/H100 mm -Weight: 10 kg

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 3x drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 19 mm -offset: 5 mm -Dimensions: 100/80/H100 mm -Weight: 2 kg Dcedpfx Ahjb A R Iqjgji

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 9 drill bits -Recording: M8 -right/left: rotating alternately Dcedpfx Ahjb A R Rhegei -Drill bit spacing: 32 mm -Dimensions: 140/125/H120 mm -Weight: 4 kg

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox Dcedpfx Asb A R Rwohgoi -Number: max. 10x drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm -Dimensions: 350/95/H85 mm -Weight: 8 kg

Condition: good (used), Year of construction: 1993, Drilling machine, bench drill, pillar drill, column drill -Manufacturer: Flott, pillar drill type SB 32 ST-FB suitable for flowdrill -Spindle mount: MK3 Dedpeyvhclofx Ahgsci -Motor: 3.0 kW -Speed adjustment: stepless with digital display -Speeds: 80 - 4000 rpm -Table size: 500 x 360 mm -Travel distance: 450 mm -Spindle stroke: 160 mm with digital display -Protrusion: 300 mm -Column Ø: 125 mm -Dimensions: 940/590/H1920 mm -Weight: 367 kg