Used Ott Edge Banding Machine for sale (66,439)

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 Crjdpfxsv Sv Ene Adheh with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Codpfszuyp Esx Adhjrh Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Condition: excellent (used), Year of construction: 2019, Edgebanding machine Manufacturer: Felder Model: Tempora 60.06, F600 Year of manufacture: 2019 Fully automatic operation from the control panel. Jointing unit: Yes End trimming unit: Yes Radius milling unit: Yes Cedpfx Adjxix Hxjherh Radius scraper: Yes

Condition: used, Year of construction: 2009, Edge banding machine with workpiece return system Manufacturer: HOMAG Type: PROFI KAR310/11/A20/S2 Cjdpszuyhuefx Adhorh Year of manufacture: 2009 Technical data Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2016, Industrial automatic edge banding machine SOLUTION XD KEY FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: A SINGLE "TOUCH" IS ALL IT TAKES TO OPERATE THE MACHINE STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE EDGE BANDING OF ROLL MATERIAL, STRIP EDGES AND SOLID WOOD EDGES GENERAL FEATURES Single-sided edge banding machine in left-hand version for edge banding of roll material and strip edges with all conventional hot melt adhesives. The base frame consists of a stable steel welded frame with higher rigidity, which provides optimal support for the installation of the processing units. The upper pressure beam consists of a thick-walled steel profile and a double trapezoidal drive belt, which is automatically positioned according to the panel thickness. Height adjustment with display on the upper pressure beam and on the operator panel. Manual workpiece feeding system with a large-sized work area and increased support surface facilitates the feeding of large workpieces. Adjustable infeed fence for two positions with automatic selection for processing with or without a pre-milling unit. Upper working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal support for precise referencing to the panel. All high-frequency motors are operated via frequency inverters. Each unit is equipped with its own inverter for optimal flexibility and improved machine production times. Protective hood for all units positioned after the glue application unit. Polycarbonate windows ensure a good view of the units during processing. Interior lighting of the hood. Protective hood with sound-absorbing material for lower noise emissions during operation. Spacer on the infeed fence allows the machine to be fed with the correct spacing. The spacing is automatically adjusted to the selected feed rate. Dust extraction port arranged on the pivoting control panel, positioned in the infeed area, is adjustable for ergonomic operation. The electrical system complies with current regulations. Electrical components are housed in a metal housing, attached to the machine frame and equipped with doors for easy access in case of maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide chain plates made of rubberized nylon, for optimal guidance and high load capacity. The chain slides on 2 guides made of hardened and ground steel, one round and one flat guide, to guarantee straight feed and to protect against lateral displacement. Automatic chain lubrication. The amount of lubricating oil is optimized by the control system depending on the panels being processed. External support roller track positioned along the entire length of the machine; consisting of an extendable opening system up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCH PC control system for quick and easy execution of the main functions of the machine. Includes: – Processing of programs in Just in Time mode – Possibility of management via bills of materials – Possibility of management by Crjdpfx Adoxy Tm Isheh

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Felder Type: G680 Year of manufacture: 2017 Technical data Power supply: 400 V, 3-phase, 50 Hz Power: 7.22 kW Current consumption: 18.6 A CE marking: Yes Equipment: Jointing unit Gluing unit Pressure zone Cutting unit Milling unit Corner rounding unit Scraper blades Polishing unit Crsdpfez Arwqox Adhoh Additional glue tank Dust extraction connections with flexible hoses Control panel with digital display Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3810x575x1520 mm Weight 1000 kg Credpfx Adevz E Scehsh Total power requirement 8 kw

Condition: new, Type GB/T10850 Motor power 0.18 kW Air pressure 3-6 bar The power supply voltage 220 V 50 Hz Total power 1.4 kW Heating power 1.2 kW Cedjd Tymnopfx Adherh Edge width 8-50 mm Edge thickness 0,3-3 mm Sealing side speed 0-26 cm/s Vacuum suction of workpiece Transport dimensions Net weight 300 kg

Condition: used, Year of construction: 2009, 0,4-6 mm Workingpiece thickness from to 6-60 mm Crodpfxszy Sfco Adheh Total length 3516 mm Feed speed 10 m/min. Weight 850 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1050x830x1100 mm Cjdpfx Aovz E Hmodherh Weight 133 kg Total power requirement 2,1 kw

Condition: as good as new (ex-display), Edge banding machine as demo unit 5 units (aggregates): Joint trimming unit incl. AIGNER diamond joint cutter heads, with Konstantin DIA interchangeable knife system and controlled edge air-blast nozzle behind the second joint cutter head. End trimming unit: 1 motor, 2 saw blades Radius milling unit with Easy Set adjustment system Radius scraper unit, retractable, incl. - Extraction device with chip collection box for scraper shavings - with Easy Set adjustment system - 2 digital readouts Flat scraper unit with 4-way usable scraper blades. The unit is retractable. General features: Cjdpfew Rcmysx Adhorh - High-gloss package: tracing rollers for the radius milling unit, radius scraper unit, and flat scraper unit - Large viewing, noise, and safety enclosure for all processing units and the glue pot - Teflon-coated glue pot with energy-saving mode in standby - Glue application roller with feed screw for long and tall workpieces - Pressure zone with motor-driven 1st steel pressure roller + 1 rubber roller - Reel shear for edging 44 x 2 mm Technical data: Edge thickness: 0.4 – 2 mm Min. panel width: 120 mm Min. panel length: 90 mm Min. panel thickness: 10 mm Max. panel thickness: 40 mm Feed speed: 7 m/min Extraction connections: 3 x 150 mm Connection: 8 kW - 400 V / pneumatic: 6 bar

Condition: excellent (used), Year of construction: 2006, I sell the fully equipped edge banding machine BRANDT Optimat KDF 550 C, year 2006: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Control panel Power Control PC20+ Cedeq A N Nujpfx Adhjrh Working thickness adjustment servomotorical Material height 8 - 50mm Edge thickness 0,4 - 8,0 mm Feeding speed 11 m/min. Total length including feeding plate 5860mm Total weight 2660 kg Very good condition, fully working!

Condition: used, Year of construction: 2005, Single-sided edge banding machine Manufacturer: IMA Type: Novimat Systems/I/R75/1000 Year of manufacture: 2005 Technical data PC control - ICOS OPEN control system Feed rate 5-25 m/min, frequency-controlled Fence with electronic positioning control Adhesive application above and below Trimming unit with 2 motors, each 4.5 kW, 9,000 rpm, controllable. - Horizontally adjustable via axis Heating element approx. 300 mm long, 2x 1.5 kW Gluing unit - Adhesive application with pneumatic quick-lock system. - Automatic PU melting system Quickmelt for 2 kg cartridges - 32-position edge magazine (8 slots up to 3 mm / 24 slots up to 1.3 mm) Vertical roller holder for 32 rollers, max. diameter 850 mm Cutting unit on the upper pressure roller with 2 motors, each 200 W, 400 V, 12000 rpm. - Horizontal pneumatic swiveling 0-25 - With controllable side contact, for 3 edge thicknesses Trimming unit with 2 motors, each 1000 W, 400 V, 200 Hz, 12000 rpm. - Operating in counter-rotation. Credpfezuyhnox Adhsh Multi-processing unit 08.348 - For chamfering or radius trimming of the upper and lower longitudinal edges, as well as for copying the front and rear workpiece edges. - Program-controlled adjustment for up to 4 profiles - 2 motors, each 660 W, 400 V, 200 Hz, 12000 rpm. Spray nozzles above and below for applying cleaning agents Multi-profile scraper unit - With stepper motor axes for horizontal and vertical positioning. - For 4 profiles. Straight scraper unit - With electro-pneumatic retraction device Copying edge smoothing unit - With 4 smoothing motors, each 250 W - Smoothing unit with 2 lower and 2 upper motors, each 180 W, 50 Hz, 1400 rpm. Smoothing unit - For smoothing and eliminating the white haze on the trimmed PVC/ABS edges - With an upper and lower smoothing zone With workpiece return system LGIMATECH ZHR 05/L/145 - Air cushion table, inclined, 2 return belts with brushing devices from below. Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2017, I sell the edge banding machine Vitap Eclipse. Edge banding station suitable for curved shaped edges Radius milling station Crjdpezmnx Sefx Adhoh Excellent condition, possible to test !

Condition: excellent (used), Year of construction: 2010, I sell the fully equipped edge banding machine BRANDT Optimat KDF 220 C, year 2010: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Glue scrapers Codpfx Aozn Avzsdhjrh Control panel Working thickness adjustment manual driven Material height 8-50mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 4150mm Total weight 1600kg Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: used, Year of construction: 2010, - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Single-sided edge banding machine Manufacturer: Homag Type: KAL 310/7/A3 Year of manufacture: 2010 Technical data - Equipped with ISAS 28-position edge magazine Csdpfozuyhhox Adhsrh - PU gluing unit - With Boomerang return system Edge trimming unit with 2 motors, each 3KW, 150 Hz, 9,000 RPM. Pneumatically controlled for pre-trimming PU gluing unit 34 with PU hot melt unit - capacity max. 6 kg/h Container size 2 kg. QA glue application unit Selectable edges from the ISAS 28-position edge magazine 4 pressure rollers Release agent spray unit, top and bottom Trimming unit WK 13, bevel / straight With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Electropneumatic adjustment of the trimming motors to 2 positions (flush trimming and with overhang) Pre-trimming unit with 2 motors, each 0.55 KW, 200 Hz, 12,000 RPM. With double-roller scanning. With electropneumatic adjustment Shaping trimming unit FK 11 - manual For processing the edge overhangs on the top and bottom edges of the workpiece, as well as for milling the front and rear edges With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Universal trimming unit UF 11 With motor 4 KW, 150 Hz, 9,000 RPM. Swiveling 90°, electropneumatically controlled With HSK 63 F collet for unlocking by push-button Profile scraping unit PN 10 Pneumatic adjustment for moving sideways out of the working area Finishing unit FA11 top/bottom Consisting of: Glue joint scraping blade Cleaning agent application Buffing unit with 2 motors, height adjustment with the upper pressure Machine control via 19-inch touchscreen Return system BOOMERANG ZHR05 With air cushion table, angled, length 2,000 mm, width 1,000 mm Conveyor belt width 1,100 mm Workpiece parameters: Length 300 - 2,500 mm / Width: 60 - 1,100 mm or Length 300 - 800 mm / Width: 1,100 - 2,000 mm Thickness 8 - 60 mm For 4-sided processing: Min. part size: 300 x 300 mm / max. part size 2,000 x 800 mm With roller strip for supporting wider parts.

Condition: used, Year of construction: 2005, - Automatic infeed table - KFA unit - Return system Used single-sided edge banding machine Manufacturer: IMA Type: Combima Systems / I/R751220/R3 1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials. - Automatic infeed table - KFA unit Crodpfx Aozuyplodhsh - Return system Technical data "Workpiece": Workpiece length - min.: 238 mm - max.: 2350 mm Workpiece width - min.: 142 mm - max.: 800 mm Workpiece thickness: - min.: 8 - 40 mm Technical data "Strip" (only for longitudinal processing): Roll material: - Paper edge bands & plastic edge bands: 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm Edge height: - min.: 14 mm - max.: 45 mm Technical data "Machine": Variable workpiece overhang from the chain conveyor (including edge with edge thickness 0.3-3 mm): - min.: 40 mm - max.: 80 mm - PC control ICOS open - Feed speed v=5-25 m/min, frequency-controlled drive - Inclined roller table as infeed section NC infeed system for front and carcass parts - for length and width-independent automatic workpiece feed in single-sided edge processing machines. Only for the production of strip material in the 2nd pass - An additional stop rail, adjustable via NC axis. Double milling unit 08.376: - Controllable - Motor 1 operating in the same direction and motor 2 operating in the opposite direction - Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW. - Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge. - Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm. - Adhesive application for workpiece thickness max. 50 mm - 2 pre-melting tanks for PU adhesive - 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm) Vertical roll holder for 12 rolls: - max. roll diameter 850 mm - max. edge height 45 mm - Trimming unit 08.42, for 2 motors mounted on the upper pressure bar - Pre-milling and milling unit with height sensor - with 1 motor 1000 W - Multi-profile / chamfer unit, with 2 motors 1000 W - Contour milling unit KFA 30 - Multi-profile drawing blade unit - Flat drawing blade 08.517 - Copy edging unit 08.604 - Edging unit 08.617-2 - Double milling stand 75.184, 1050 mm high, both stand sides can be used - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm - Motor spindle for the use of the Hydro-Format tool system - Return system, manufacturer Meinert Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used HOMAG EDGETEQ S-240 edge banding machine, manufactured in 2021. The delivery also includes a KOGI dust extraction unit in a two-bag configuration with 2.2 kW power and 1,650 Pa suction capacity. The machine is additionally equipped with a glue pot for special applications. A valuation report (PDF) is attached. Processing units Joint trimming / pre-milling unit Corner rounding unit Radius scraper Glue scraper Buffing / polishing unit PUR-capable (PUR-ready system) Technical data Required air pressure: 6.5 bar Total machine length: 4.8 m Current operating hours: 460 h Machine data Type: EDGETEQ S-240 PROFI KDF 230 Serial number: 0-261-73-7111 Year of manufacture: 2021 Wiring diagram: 0-261-73-7111 Credpjy Exwfofx Adheh Supply voltage: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Maximum current at full load: 17.3 A Fuse rating: 20 A Short-circuit current: 5 kA Control voltage: 24 V Protection class: NEMA 1 Largest motor current: 4.6 A Highest heating current consumption: 2.3 A Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Year of construction: 1999, condition: good (used), IMA Compact MFA / F / 5212 edge banding machine Year of manufacture: 1999 Serial number: 06601 Max. edge banding thickness: 12 mm Min. workpiece thickness: 10 mm Max. thickness of edging material roll: 3 mm Feed speed: 12 m/min Adjustment of the joint guide rail: manual Heating time: 10 min Jointing unit: Yes, with 2 milling units Automatic edging roll magazine: Yes Trimming shears up to: 0.2 - 3.0 mm Solid edge magazine: Yes Preheating of the panel by heating radiator Automatic glue application with glue tank and granulate Cutting saw angle adjustment via program Multi-function unit Rounding unit/corner copying, 2 motors Profile trimming blade Flat trimming blade Buffing unit Unit display, mechanical digital display Control type via control panel Operation: selector switch/push buttons Protective hood Csdpfx Aoia Naqodhorh Weight approx. 2500 kg Dimensions L x W x H: 6500 x 1000 x 1600 mm CE marked Technical specifications subject to change

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3200x780x1500 mm Csdsvz E Evspfx Adhorh Weight 800 kg Total power requirement 8 kw

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine BRANDT Optimat KDF 440 C, year 2015: Configuration: Entry fence servomotorical adjustable Premilling manual adjustable Edge banding EVA glue / Airtec System Schugoma Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers pneumatic adjustable Polishing brushes Cleaning fluid spraying front and back. Control panel Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-8mm Feeding speed 11m/min. Total length including feeding plate 5573mm Total weight 1860kg Only 592.198 Meters edgebanded. Codpfx Ajwun Irodhjrh Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2650x640x1400 mm Weight 700 kg Total power requirement 5 kw Credpovz E T Hsfx Adheh

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Homag Type: Optimat KDF 440 C Year of manufacture: 2017 Cedpfx Aozuykcodhorh Technical data Workpiece thickness: 8 - 60 mm Edge material: 0.4 - 8 mm (depending on the equipment) Feed rate: 8 - 18 m/min (stepless) Workpiece length min. approx. 120 mm Workpiece width min. approx. 60 mm Glue application EVA hot melt adhesive, optionally PUR-compatible Glue reservoir Teflon-coated, quick-change system possible Total connected load approx. 15 - 20 kW (depending on the equipment) Compressed air requirement: 6 - 7 bar Machine weight: approx. 3,000 - 3,800 kg Control system: powerControl / powerTouch CE marking Equipment: Joint milling Glue application Pressure zone Cut-off saw unit Milling unit top/bottom Corner rounding unit Scraping blade unit Edge finishing unit Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Biesse Type: Jade 240 Crsdpezuyixefx Adhsh Year of manufacture: 2017 Technical data Note: [b]The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.[/i]

Condition: new, Year of construction: 2026, EBM360B Edgebander – Professional Straight and Curved Edge Banding Machine The EBM360B is a professional benchtop edge banding machine designed for precise edging of both straight and curved workpieces. Thanks to its robust construction, reliable operating systems, and automation of key processes, the machine is ideal for medium-sized and large woodworking and furniture manufacturing facilities that require repeatability, efficiency, and high-quality results. Key Advantages Versatile application – suitable for straight and curved workpieces, with edge band widths of 10–60 (68) mm and thicknesses of 0.3–3 mm. Process automation – pneumatic shears for precise edge band cutting, with automatic feeding and material pickup from the magazine. Stable and durable construction – a heavy-duty machine bed and reliable mechanics ensure long-term, trouble-free operation. Efficient bonding – a 2 kW heated glue pot ensures uniform and strong adhesion of the edge band. Ergonomic operation – the control panel is positioned within easy reach of the operator, with intuitive adjustment of operating parameters. High productivity – continuously adjustable feed speed from 0–14 m/min allows the machine to be adapted to different production requirements. Construction and Technology The EBM360B has been designed for demanding industrial working conditions. Machine body – a stable welded construction that minimizes vibration and improves operating accuracy. Heating system – a 2 kW heater provides rapid glue heating and uniform glue application. Drive motors – a set of motors (0.18 kW, 0.37 kW, 0.4 kW) providing independent drives and increasing component durability. Pneumatic shears – ensure clean and precise cutting of the edge band. Pneumatic system – a working pressure of 6 bar ensures stable operation of the feeding and cutting systems. Precision and Productivity With the ability to work with a minimum radius of 20 mm, the EBM360B enables precise edge banding of workpieces with complex geometries. The continuously adjustable feed speed of up to 14 m/min allows productivity to be adapted to the production scale while maintaining high bonding quality. Applications The machine is designed for professional woodworking and furniture manufacturing facilities where the following are essential: edge banding of straight and curved workpieces, repeatability and precision when processing large quantities of components, high productivity in both batch and one-off production, durable and aesthetically pleasing edge finishing. Standard Equipment 2 kW glue heater, pneumatic edge band cutting shears, automatic edge band feeder, control panel with adjustable operating parameters, stable steel machine bed. Technical Specifications Edge band width 10–50 (58) mm Edge band thickness 0.3–3 mm Minimum working radius 20 mm Maximum cutting width 50 mm Heating power 2 kW Power supply 400 V Motors 0.18 kW / 0.37 kW / 0.4 kW Feed speed 0–14 m/min Air pressure 6 bar Dimensions (L × W × H) 1550 × 800 × 1000 mm Weight 185 kg Csdpjwl Eaaefx Adhsrh