Used Nimak Projection Welding Machine for sale (67,222)

Year of construction: 2025, condition: new, Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%. Due to inverter technology, energy efficiency is higher than the conventional machines. Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases. 4 Wheel Drive system, offers very powerful feedability for longer torches and offers less deformation on soft wires such as aluminum and flux cored wires. Welding voltage, wire feed speed (welding current) is adjusted from the panel in front of the wire feeder. Optimum welding parameters can be obtained from the printed table inside of the wire feed cabinet. Manual wire feeding & gas valve buttons, Trigger Mode (2/4), Spot mode are available on the wire feeder. Soft Start, Pre-gas, Post-gas, Crater Filling, Burn-Back, Flow Sensor settings are adjusted from the digital panel of the wire feeding system. Iodpfxsyx Hpio Amlstf ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used. 24V AC outlet for CO2 gas heater. Built in gas cylinder platform with large wheels to ease mobility in workshops. The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request (M-MW models). Protected against voltage fluctuations. Designed also for outdoor use, protection class is IP 23. Water cooling unit for water cooled torches provides powerful cooling even at very hot climates. (Water-cooled (W) models) Standard accessories come with the machine.

Condition: good (used), Year of construction: 1985, Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Manufacturer: Tecna, Spot welding machine: Type 4161 -Rated power: 31 kVA -Operation: via foot pedal -Dimensions: 780/250/H1500 mm -Weight: approx. 130 kg Iedpfx Aok Aubxemletf

Condition: good (used), Year of construction: 1976, Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Stationary -Operation via hand switch -Arm length of welding machine: 350 mm -Welding pliers type: -Steering -Machine dimensions: 1500/1000/H1670 mm -Machine weight: 774 kg -Dimensions of control cabinet: 1550/420/H1960 mm Ijdsc N Uabspfx Amljtf -Weight of control cabinet: 330 kg

Condition: excellent (used), Year of construction: 2021, Esab Fabricator EM 401i Iedpfx Amjxq N D Rslotf Technical Data: Water-cooled MIG/MAG inverter Continuously adjustable with 400 A output Duty cycle: 400 A at 60% 310 A at 100% Digital display on the power source 4-roll wire feeder Faricator Feed 304 2-meter intermediate hose package Includes earth cable, pressure regulator, and one spool of wire Weight: 107.5 kg Dimensions approx. 1300x500x1020 mm

Condition: good (used), Year of construction: 2016, Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Manufacturer: CEA, rocker arm spot welding machine type ZP 28 -Rated power: 25 kVA Iodpfx Ajyvz Inomletf -Arm length: 550 mm, adjustable length -Operation: via foot pedal -Dimensions: 1050/330/H1270 mm -Weight: 152 kg

Condition: used, MIG MAG welding machine, shielding gas welder CLOOS type GLC 357 N MIG MAG welding power source Serial no. 576 Year of manufacture approx. 1985 Rated output 350 Amp. Output 350 Amp. - 80% duty cycle 310 Amp. - 100% duty cycle Continuously adjustable output range Connection hose package: 4.5 meters Power supply: 380 Volt, 50 Hz, 32 Amp plug - 2-stroke and 4-stroke welding function - External wire feeder type CK 72 ZK with 2-roller drive and 4.5 meter hose package Ijdpfxehubg Ts Amlstf - 3 meter hose package with central connection and CLOOS hand torch - Water-cooled - Pressure gauge for gas cylinder - Welding unit equipped with 1 mm welding wire Space requirements (L x W x H): 1250 x 600 x 1100 mm Weight: 260 kg Machine tested – fully functional

Condition: used, Spot welding pliers with DALEX RS 17 control unit and balancer Spot welding pliers DALEX Type A 3139 Serial number: 98G 69757 Year of manufacture: 1998 Rated power at 50% duty cycle: 8 kVA Maximum welding power: 22.4 kVA Open-circuit voltage: 2.9 Volts Maximum electrode force: 200 daN Maximum short-circuit current: 9.5 kA Itodpfoyxrhdsx Amlof Cooling water flow: 1.5 l/min Power supply: 400 Volt, 50 Hz Throat depth: 250 mm Arm spacing: 120 mm Electrode holder diameter: 12 mm Spot electrode diameter: 6/12.5 mm Electrode gap: max. 230 mm - Pliers with water cooling (without cooling unit) - cooling water requirement 1.5 l/min. - Suspension device: DALEX balancer Type D4-21 Weight of welding pliers: 15.5 kg Welding controller DALEX RS 17 LS 5-phase synchronous welding controller with 2 welding programs PAS no.: 0413-410 Serial no.: 41341000278 Year of manufacture: 2006 Operating modes: Single (EP) / Series (SP) Pre-hold time, post-hold time, hold-open time, and pause time: each adjustable 1 – 99 cycles Current time: 0.5 – 9.5; 10 – 99 cycles Welding current: 0 – 99 Skt. Impulses: 1 – 99 Current rise time: 0.5 – 9.5; 10 – 15 cycles Parameter setting via arrow keys - with solenoid valve control - Current adjustment via phase angle control - Welding control unit in steel switch cabinet for wall mounting Total weight: approx. 30 kg Very good condition

Year of construction: 1990, condition: used, machine/vehicle number: 9072492, nominal capacity: 100 kVA throat: 500 mm spark plug air gap: 330 - 500 mm electrical connection: 400 V kW space needed: 700 x 1420 x 2000 mm weight: 750 kg Iedpsz H Dyefx Amljtf

Condition: good (used), machine/vehicle number: 202 0239, range of control current flow: 25 - 190 A range of control alternating flow: 25 - 190 A current flow 60% ED: 190 A current flow 100% ED: 160 A alternating flow 60% ED: 170 A alternating flow 100%ED: 160 A Itjdpocvbu Refx Amlof space needed: 1200 x 600 x 800 mm weight: 300 kg

Condition: used, machine/vehicle number: 4229, nominal capacity: 12,5 kVA Itodpfxobh Nxrj Amljf throat: 350 - 500 mm spark plug air gap: 120 mm welding capacity steel: 8 mm electrical connection: 380 V kW space needed: 400 x 1000 x 1150 mm weight: ca. 190 kg

Condition: ready for operation (used), Year of construction: 2008, TIG welding system Adjustment range: 10 - 320 A Adjustment range for electrode: 25 - 280 A Itedpfx Aswx H Aiomlof Duty cycle at 60/100%: 320/260 A Electrical connection, mains voltage: 400 V Weight: 290 kg Space required: 1200 x 600 x 950 mm

Condition: ready for operation (used), range of control: 30 - 300 A Isdpfx Aowvixuomletf max. welding circuit 60% ED: 240 A max. welding circuit 100% ED: 180 A electrical connection: 400 V kW space needed: 1050 x 450 x 810 mm weight: 132 kg

Condition: ready for operation (used), Year of construction: 1998, MIG-MAG welding system Set welding current: 50 - 400 A Max. welding current at 45/60/100% duty cycle: 400/345/265 A Open circuit voltage: 16.5 - 45 V Standard wire feed for steel: 1.0 + 1.2 mm Wire feed speed: 1 - 20 m/min Iodpewx Hz Esfx Amlotf Electrical connection: 380 V Weight: 164 kg Space required: 950 x 550 x 850 mm

Condition: ready for operation (used), Welding current at 25% duty cycle: 250 A Welding current at 100% duty cycle: 110 A Welding current continuously adjustable: 5 - 250 A Electrical connection: 380 V Itjdpfx Amewvggpelsf Space required: 650 x 600 x 1100/1500 mm high Weight: 55 kg

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and inspected Rated voltage: 400V Rated power: 60kVA at 50% duty cycle Short-circuit current: 22kA Welding current: 17.6kA Itjdpsh N Sd Uefx Amlef Fuse protection: 125A Throat depth: 420mm Electrode force: 470daN Cylinder with pre-stroke Total stroke: 80mm Double stroke: 60mm Electrode taper MK2 – new electrode holder New 2-stage foot switch according to UVV All pneumatic and water hoses renewed Weight approx. 330kg - TE 180 with digital display of welding current, current rise, etc. - Main switch at control cabinet - Original documentation / operating manual available - Machine inspection with confirmation 02/2026 Demonstration and inspection by appointment, Commissioning and training at customer’s site available for an additional charge The unit is located in Dresden, near A17 A suitable cooling unit is always in stock – available at an additional cost ;-)

Condition: used, Year of construction: 1975, machine/vehicle number: 12138/4, nominal capacity: 20 kVA throat: 250 - 600 mm spark plug air gap: 270 mm welding capacity steel: ca. 2,5 + 2,5, max. 3,5 - 1,5 mm electrical connection: 380 V kW Itjdpfxeb Nvimo Amlof space needed: 470 x 1170 x 1300 mm weight: 210 kg

Year of construction: 1998, condition: good (used), functionality: fully functional, Edge milling machine, manufactured by IMAC year of construction 1998 . Model : CB 18 . Iodpjy A Hnmjfx Amlotf Series : B20 .

Condition: used, Year of construction: 2012, manufacture NIMAK Itjdpfx Asxrg Ebemlof electric cabinet Rexroth - Bosch Group dimension div. verfügbar In our opinion, the machine is in good used condition Condition and can be viewed by appointment. Welding tons Technical features: - including control unit There are around 150 different welding tons available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Year of construction: 2024, condition: new, Everything can be configured on request, very short production times and a high degree of flexibility. Itjdpfx Amed Tpy Njlef

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 4,000 mm, welding current at 60% duty cycle: 245 A, welding current at 100% duty cycle: 210 A, welding current (min.): 5 A, welding current (max.): 260 A, Lastek Invertig 260 AC/DC Digital – Water-cooled TIG ACDC 3-month warranty Refurbished, tested, serviced, and ready for immediate use Specifications: Ijdpfxsywgpto Amlotf 5-260 AMP 380 Volt Water-cooled ACDC Pulse 2/4 Step Pre gas / Post gas Start current / End current Up slope / Down slope Frequency adjustable AC Balance AC Frequency Electode option Including Parweld PRO20 Welding torch, earth work cable with clamp, and gas cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 4,000 mm, welding current at 60% duty cycle: 245 A, welding current at 100% duty cycle: 210 A, welding current (min.): 5 A, welding current (max.): 260 A, Rehm Invertig 260 AC/DC Digital – Water-cooled TIG ACDC 3-month warranty Refurbished, tested, serviced, and ready for immediate use Specifications: 5-260 AMP 380 Volt Water-cooled ACDC Pulse 2/4 Step Pre gas / Post gas Start current / End current Up slope / Down slope Frequency adjustable AC Balance AC Frequency Electode option Including Parweld PRO20 Welding torch, earth work cable with clamp, and gas cable. Visits by appointment only. Test welding is possible. Iedpfx Aeywgpaomlstf A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, MIG / MAG Pulse Gas-Shielded Welding Machine FRONIUS Type TransPulsSynergic - TPS 330 Art. No.: 4.075 Serial No.: Year of manufacture approx. 2000 Output: 330 amps = 50% duty cycle (DC) 300 amps = 60% duty cycle (DC) 210 amps = 100% duty cycle (DC) Ijdpfjyv H Elsx Amletf Stepless adjustment range Open circuit voltage approx. 50 V Open circuit voltage approx. 30 V Power supply: 400 V, 50 Hz, 32 A plug - Digital display for voltage and amperage - Pulse welding function - Various welding programs selectable Welding methods: MIG/MAG/TIG (programmed and manual modes) 2-stroke, 4-stroke, 4-stroke special, and spot welding - Welding control with program memory and disk drive for external program storage - Separate 4-roller wire feeder FRONIUS Type VR 152 with connecting hose package approx. 1.5 meters - 4-meter BINZEL hose package with central connection - External Fronius water cooling unit Type FK 71 - Welding gas pressure regulator - Supplied with 1.2 mm welding wire Space requirements (L x W x H): 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition – fully functional – ready for demonstration

Condition: good (used), Year of construction: 1995, Rated power: 63 kVA Thrust: 520 mm Electrode arm distance: 200 mm Welding capacity for steel: approx. 7 + 7 mm Iedpfx Amowurw Relotf Welding capacity for non-ferrous metals: approx. 2 + 2 mm Electrical connection: 380 V kW

Condition: used, Welding current at 25% duty cycle: 250 A Welding current at 100% duty cycle: 110 A Welding current continuously adjustable: 5 - 250 A Electrical connection: 380 V Itsdpfx Amewvgg Njlof Space required: 650 x 600 x 1100/1500 mm high Weight: 55 kg

Condition: refurbished (used), functionality: fully functional, welding current (max.): 400 A, Equipment: type plate available, ESS EcoMag 414 – Water-cooled MIG/MAG Note: This is a Trade-in. Refurbished, tested, serviced, and ready for immediate use. Ijdpfx Aoywatrjmlotf Specifications: 40-400 AMP 380 Volt Water-cooled 2/4 Step / 4 Roller drive Steplessly adjustable Including PRO5000 Welding torch, earth work cable with clamp, gas cable, and +- 5 meter interconnection hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.