Used Mikron Vce 1000 Pro for sale (14,663)

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg Fpjdpfx Aioxaafqjvsn turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: used, The SAMO slitting line, 2001 processes material up to 1,000 mm wide and is integrated with the PROMEC packaging line, 2019. (N19). Installed electrical power is 451 kW; Area 365 sq Meters Capabilities include: Coil Inside Diameters: 400 / 500 Coil Outside Diameter: 1,500 mm Strip width: Fpsdpfxsz Iq U Nj Aiven Entry: 350–1,040 mm Exit: 20–1,020 mm Thickness: 0.3–3.0 mm Line Direction; Left to Right Siemens S7-400 PLC Installation includes: Coil Stand- 3 Coils Uncoiler with Snub Control Roll Motor: 26.5 Kw DC Edge Control, EMG Paper Winder Peeler Table Pinch Roll Crop Shear Vollmer Contact Thickness Gauge, Slitter Head Motor Drive: 72Kw, DC 400 Volt Edge guiding with automatic adjustment before slitting head Horizontal guide rolls before slitting head Shaft OD: 180mm Slitting Knives OD: 280mm Scrap winder Edge guiding at exit Rotating tooling turnstile on rails – 4 sided with 2 arms per side Pit with Pit Car Tension stand: Tension stand on linear rails Material table with horizontal and vertical position 4 horizontal guide rolls – pneumatically engaged 3 Roll Tension bridle roll system as material break Bridle roll motor: 138kW DC Crop shear Material table Re-coiler: Full hydraulic drum Overhead separator arm Motor: 190kW DC drive Ground level L-Shape coil car with overhead hold down arm 4 – arm coil turnstile with push-off arm (5) Above ground Coil Cars All hydraulics and Controls PROMEC Packaging line: (See below) Underground coil car in front of Turnstile Scale PROMEC PACKAGING LINE, 2019 Layout Code: N19 Automatic packaging system serving the SAMO slitting line. Installed electrical power: 65 kW. Processes strip widths from 40–200 mm and thicknesses from 0.2–3.0 mm. Siemens S7-400 PLC First table: Tilting table with mandrel for coil handling Signode Strapping Machine Overhead Manipulator- Horizontal Coil Handling with expanding mandrels into ID or 3 arm OD clamping Packages eye to the sky or eye to wall. All hydraulics and Controls

Condition: good (used), Machine spirit level, block spirit level, frame spirit level, straightedge level, precision spirit level, frame straightedge level, precision machine spirit level Fodpfx Aozh E T Aoivopn -Manufacturer: Fr. Keilpart, Precision machine spirit level -Reading: 0.03 mm/m -Box dimensions: 220/65/H70 mm -Weight: 2.1 kg

Condition: new, turning length 1000 mm turning diameter 420 mm swing diameter over bed slide 255 mm turning dia. in gap 580 mm spindle bore 52.0 mm turning speeds 30-550 / 550-3000 U/min bed width 250 mm spindle taper 55029 D 1-6 taper in tailstock 4 MK quill travel 140 mm total power requirement 5.5 kW weight of the machine ca. 1145 kg. range L-W-H 2090 x 1050 x 1600 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Foot pedal with brake function according to CE - Quadruple tool holder - Protective device for quadruple tool holder Fpjdjxaakyepfx Aivon - Micrometer longitudinal stop - Turret stop with fine adjustment - Frequency converter - Initial filling with Shell Tellus 46 - Coolant system - Slip clutch - Thread gauge - LED machine light - Change gears - Reducing sleeve - 2x centering tips - Chip back wall - Operating tool

Condition: used, Machine type: Corrugated sheet profiling line – new CHIEF PHENIX type Main components: - Coil lifting arm – 10-ton capacity - Decoiler – 10-ton capacity - Straightener – Dimeco Fpodpfx Aijw Dd Hpjven - Feeder – Dimeco Microfeeder - Hydraulic punching press – SCMB 650 tons - Post-press feeder – Heilbronn - Roller conveyors - Rollforming line – 1000 mm, corrugated profile, CHIEF PHENIX new type Machine Application Automated production line for converting metal coils into corrugated sheets, including straightening, high-force hydraulic punching, continuous feeding, and rollforming. Suitable for structural and cladding applications. Key Features / Differences Modern system with high-performance units: 650-ton SCMB hydraulic press for precise punching, Dimeco straightener and Microfeeder for high throughput. 1000 mm rollforming line configured for optimized CHIEF PHENIX corrugated profile.

Condition: new, turning length 1000 mm turning diameter 420 mm swing diameter over bed slide 255 mm turning dia. in gap 580 mm spindle bore 52.0 mm turning speeds 45 - 1800 U/min bed width 250 mm spindle taper DIN 55029 D 1-6 taper in tailstock 4 MK Fpsdpfoxaavvox Aivon quill travel 140 mm total power requirement 3.0 / 4.5 kW weight of the machine ca. 1220 kg range L-W-H 2070 x 900 x 1600 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Coolant system - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Slip clutch - Turret stop with fine adjustment - Thread gauge - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Initial filling with Shell Tellus 46 - LED machine light - Change gears - Reduction sleeve - 2 centering points - Chip back wall - Operating tools - Operating instructions

Condition: new, turning length 1000 mm turning diameter 460 mm swing diameter over bed slide 270 mm Fpodpfx Aexab H Asivon turning dia. in gap 690 mm spindle bore 80.0 mm turning speeds 25 - 1700 U/min bed width 300 mm spindle taper DIN 55029 D 1-8 taper in tailstock 4 MK quill travel 130 mm total power requirement 5.5 kW weight of the machine ca. 1675 kg. range L-W-H 2300 x 1080 x 1600 mm Scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant system - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diameter max. 150 mm - Follow-on steady rest - passage diameter max. 110 mm - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Slip clutch - Rapid traverse lengthwise and facewise - Change gears - 2 centering points - Reducing sleeve - Thread gauge - LED machine light - Chip back wall - Operating tool

Condition: used, This item is unused and in the original packaging We have a quantity available The InPro 3253SG 120/PT1000 is an in-line industrial pH electrode (probe) intended for continuous process measurement rather than simple lab spot checks. It integrates both the pH sensing element and temperature compensation in a single unit, allowing accurate, real-time pH measurement in process lines, tanks, fermenters and reactors Physical & Mechanical - Sensor shaft length: ~120 mm — relatively short, good for installations with limited insertion depth. - Process connection: Pg 13.5 threaded connection. - Connector type: VP industrial connector for secure integration. - Pressure rating: Up to ~4 bar gauge. Fpedpfx Aey Iw Etsivon Temperature & Compensation - Built-in PT1000 temperature sensor — provides temperature compensation for accurate pH reading. - Operating range: ~0 °C to ~100 °C. Sensing & Reference System - Glass pH sensing membrane with a pre-pressurized liquid electrolyte system — lowers maintenance and improves stability. - Ceramic diaphragm — stable reference junction. - Argenthal silver-ion trap cartridge — improves reference performance, especially in environments containing sulfides. - Sterilisation & Hygiene - Sterilisable/autoclavable — built to withstand repeated steam sterilization or autoclave cycles without losing calibration or performance. Certifications & Approvals - Typically supplied with industrial and safety certifications (e.g., ATEX, IECEx and CE) for use in hazardous zones and hygienic processing. pH Range - Suitable for pH measurement typically within 0 to 12 (depending on membrane type). Summary In essence, the Mettler Toledo InPro 3253/120/PT1000 is a high-performance industrial pH electrode designed for robust, low-maintenance in-line monitoring with integrated temperature compensation, suitable for sterilizable and process‐critical environments. Its pre-pressurized reference and rugged build help deliver stable pH measurements in demanding applications.

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition Fedpfx Asl Nbqcoivjpn

Condition: ready for operation (used), Year of construction: 2002, operating hours: 23,462 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 20,000 rpm, The machine spindle was replaced in 2022. Since then, the machine has accumulated approximately 6,500 operating hours. TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 650 mm Travel range Z-axis: 500 mm Spindle speed range: 0–20,000 rpm Spindle speed control: stepless Tool interface: HSK 63 Magazine capacity: 30 Clamping area: 900 × 600 mm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 3,200 x 2,400 x 3,000 mm Weight: 10 t Operating Hours Machine operating hours: 54,796 h Spindle hours: 23,462 h Fpsdez Hwvdopfx Aivjn EQUIPMENT Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Electronic handwheel Tool measurement in the work area with BLUM laser 3D infrared probe Renishaw Chip conveyor Coolant system 4 height-adjustable machine feet Operating manuals

Year of construction: 2000, condition: good (used), Vitronics Soltec reflow oven, type: 6638 Quantis Pro Fpjdeq I Shajpfx Aivjn

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 025, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,800 mm, total length: 3,000 mm, total width: 2,500 mm, table width: 600 mm, table length: 800 mm, table load: 800 kg, overall weight: 9,500 kg, spindle speed (max.): 36,000 rpm, operating hours of spindle: 9 h, spindle nose: HSK 50E, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, For sale is a used high-speed machining center from the manufacturer MIKRON. High-precision CNC machining center from Mikron / GF AgieCharmilles, designed for demanding HSC machining in toolmaking, graphite and electrode machining, as well as for flexible series production. Additionally equipped with APS (Advanced Process System) and ITC (Intelligent Thermal Control) for maximum process reliability and thermal stability. At “Der Spindel Doctor”, a Step-Tec spindle (a key component of the machining center) was professionally overhauled (report and invoice included) and put back into operation after balancing and inspection. The machine will be completely set up and tested according to the Mikron protocol. During the machine inspection, many wear parts were replaced: X-axis encoder and scale, pneumatic cylinders on the tool changer, tool holders, pneumatic maintenance unit, pneumatic hoses, MMS hoses, water hoses, etc. The machine is energized and can be inspected and tested. By arrangement, the machine can be put into operation at your location. Accessories: 4-position pallet changer II Fsdpfx Asz Dx Sheivopn Table chuck Preparation for PS 32.00 measuring probe Mobile handwheel Blum laser tool measurement system Spindle cooling unit Minimum quantity lubrication - Unilub Oil mist extraction Optical operating mode indicator Air nozzle on the spindle slide Chip conveyor (including coolant tank) General overhaul of the spindle

Condition: used, Year of construction: 2017, Control Heidenhain TNC 640 x-travel 600 mm y-travel 450 mm z-travel 450 mm spindle tunring speed 20.000 U/min tool taper HSK-A63 number of tool places 170 Pos. Condition: Used Fpsdpfx Aioz Ic Afevsn Technical features & accessories: - Tool magazine, MIKRON ATC 170 - Tool cooling system, HABOR PRECISE INC - Oil mist/air filter, DSL Signatec 15 - Chip conveyor, KNOLL 500 K-1 - Workpiece magazine with 7 stations Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2017, machine/vehicle number: IntNr231674, A high-quality, 3-axis precision machining center, the MIKRON MILL P 900 from GF Machining Solutions, built in 2017, is for sale. TECHNICAL DATA General Data Manufacturer: MIKRON / GF Machining Solutions Model: MILL P 900 Machine type: Vertical 3-axis precision machining center Year of manufacture: 2017 Number of axes: 3 Spindle operating hours: approx. 1,530 hours CNC control: FANUC 31i-B TECHNICAL DATA Travel X: 900 mm Travel Y: 600 mm Travel Z: 450 mm Rapid traverse X/Y/Z: 30 m/min Clamping area: approx. 1,000 × 600 mm Fodjz Ipnnopfx Aivepn Max. table load: 1,000 kg Max. spindle speed: 20,000 rpm Tool holder: HSK-A63 Spindle power: up to approx. 36 kW Torque: up to approx. 120 Nm Tool changer: 30-position Tool holder: HSK-A63 Machine concept: 3-axis gantry machining center The machine can be inspected on site by appointment. Subject to change, errors and prior sale!

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 05.14, travel distance X-axis: 410 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 330 mm, spindle speed (max.): 2,240 rpm, spindle speed (min.): 50 rpm, total height: 1,560 mm, total width: 1,230 mm, total length: 1,330 mm, table length: 630 mm, rotational speed (max.): 2,240 rpm, rotational speed (min.): 50 rpm, overall weight: 1,000 kg, input voltage: 400 V, Equipment: documentation/manual, Mikron WF 2S – Year of manufacture 1985 Feature | Technical Data Manufacturer | Mikron, Switzerland Type | WF 2S Fpedpfx Aijz Ix Drevon Year of manufacture | 1985 Machine type | Universal tool milling machine X-axis | approx. 420 mm Y-axis | approx. 250 mm Z-axis | approx. 335–340 mm Table size | approx. 700 × 250 mm Spindle mount | ISO 40 Spindle speeds | 12 steps Speed range | 50–2,240 rpm Feeds | approx. 8–400 mm/min Rapid traverse | approx. 1,400 mm/min Main motor | 1.2 / 1.8 kW, two-stage Feed motor | approx. 0.55 kW Coolant pump | approx. 0.1 kW Weight | approx. 770 kg with vertical head/tilting table; depending on the configuration, up to approx. 1,000 kg Position indicator | often Heidenhain, depending on the configuration These values are also specified for a WF 2S currently offered from Switzerland, including a travel range of 420 × 250 × 335/340 mm, a speed range of 50–2,240 rpm, and a 1.2/1.8 kW spindle motor. Manuals, electrical diagrams, and programming instructions are available.

Condition: used, 3D Systems SLS PRO 230 Sinterstation Pro Fully operational and complete with extensive accessories Fedpsyghifofx Aivepn

Condition: excellent (used), Year of construction: 2011, operating hours: 4,450 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 360 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, controller manufacturer: Heidenhain, controller model: iTNC530i, table load: 25 kg, rotational speed (min.): 250 rpm, spindle speed (max.): 42,000 rpm, operating hours of spindle: 4,400 h, coolant supply: 4 bar, number of spindles: 1, number of slots in tool magazine: 66, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, HSC milling machine Fpjdpfx Aozzknxsiven HSM 400 U LP Milling spindle Steptec 42,000 rpm, 2 years old ITC & ITCX 5-axis thermal control Heidenhain TNC 530i control system Tool magazine 66X HSK40E Rotary table ITS 148 Minimum quantity lubrication Oil-mist extraction system Chip conveyor, manufacturer Phoenix Metall Water/water heat exchanger Measuring probe, infrared, manufacturer M&H 40.01 TX/RX Pallet magazine, 20 x ITS 148 Coolant and air supply from outside

Condition: excellent (used), Year of construction: 2015, Mikron HPM 800U HD 5 axis Vertical Machining Centre, with 7 pallet changer (2015) Traverses XYZ: 800 x 800 x 550mm, 500 x 500mm table, A axis -91 / + 121 degrees, C axis, 360 degrees, Heidenhain TNC530, Spindle Speed 20,000rpm, 36kW Spindle Motor, HSK A63 Spindle Taper, 165 tools, swarf conveyor, through spindle coolant, Fpjdpjzm Ticjfx Aivon

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 441, functionality: fully functional, pressing force: 28 t, throat depth: 220 mm, overall weight: 3,600 kg, working width: 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Pressing force: 28 t Max. working width: 1,000 mm Column gap: 950 mm Throat depth: 220 mm Back gauge depth: 415 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,500 x 1,150 x 2,400 mm Weight: 3,600 kg Transport packages: 1 Power: 3.0 kW Fpsdpfsy Rxy Dox Aivon EQUIPMENT CE marking Documentation

Condition: good (used), Year of construction: 1986, Mikron milling machine WF 51, manufactured in 1986. Control system: Heidenhain TNC 155 Tool holder: SK 40 Spindle stroke: 110 mm Table size: 1000 x 500 mm Fpedpozr Ubwsfx Aivjn Travel distances: x-710, y-500, z-460 mm Spindle speed: 31.5-3150 RPM

Condition: used, Year of construction: 2011, operating hours: 10,550 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, torque: 84 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 1,200 kg, table width: 600 mm, table length: 1,400 mm, table load: 1,200 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 10,550 h, coolant supply: 70 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Selling a top-maintained Mikron HPM 1200 HD, manufactured in 2011, equipped with a Heidenhain iTNC530 control system. Travel ranges: X: 1200mm Fjdpfx Aiozkbr Tjvjpn Y: 600mm Z: 500mm Equipment: Table dimensions: 1400 x 600mm Table load capacity: 1200kg Control system: Heidenhain iTNC530 Chip conveyor Spindle mount: HSK-A63 Spindle speed: 20000 RPM Tool changer: 60 positions Electric handwheel Tool measurement 3D probe IKZ 70 bar Weight: 15 tons Accessories: 20 tool holders HSK-A63 2 vices Complete documentation Machine feet The machine can be inspected and tested under power after prior appointment.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Operating hours: approx. 3,000 h Fjdpsy Nl U Sjfx Aivjpn

Condition: used, Year of construction: 2008, Control HEIDENHAIN iTNC 530 x-travel 1.850 mm y-travel 1.400 mm Fpodpfx Aijz N Hxzjvjn z-travel 900 mm c-axis 360 ° b-axis -20 / +120 ° Condition: Used Technical features & accessories: - Cooling unit BURN RW12000-N15 - Chip conveyor BMF KFE63/50-275Z60 - Belt filtration system - Coolant system Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change and errors in technical data and specifications; subject to prior sale.

Condition: new, functionality: fully functional, ✅ New stock ✅ €4,179 incl. VAT ✅ Available immediately ✅ Shipping possible The SCHORR RR1000DHKB crawler dumper is a powerful and versatile mini dumper with hydraulic tipping drive and a payload capacity of up to 1,000 kg. Powered by a 15 HP single-cylinder 4-stroke petrol engine, it effortlessly tackles rough terrain and inclines. The self-propelled dumper is equipped with a robust track drive, ensuring a secure stand and optimal traction. The generous loading platform allows for the transport of Euro pallets, even with sidewalls closed. The hydraulic tipping skip makes unloading considerably easier, while the automatic front-opening of the skip ensures complete emptying without manual assistance. Removable side panels make the platform flexibly extendable, allowing for easy transport of larger or bulky loads. Thanks to the intuitive crawler drive, the dumper can be maneuvered safely and precisely even on uneven ground. The foldable ride-on platform enables comfortable travel over longer distances, and the 6+2 speed gearbox ensures precise control and speed adjustment. With a maximum forward speed of 6 km/h and reverse speed of 3 km/h, complex maneuvers on the construction site are easily managed. The RR1000DHKB is designed for outdoor use, combining robust construction with user-friendly operation. The engine features a recoil starter, and all fluids—fuel, hydraulic oil, and gear oil—are easily accessible for maintenance and refilling. Dimensions: Total length 2240 mm, width 900 mm, height 1235 mm. The skip measures internally 1315 × 815 × 300 mm, externally 1390 × 880 × 300 mm, filling height closed 785 mm, and 485 mm without side panels. SCHORR provides comprehensive service: spare parts are always available, and repairs can be carried out in our workshop if necessary. Our team is available to answer your questions or offer advice regarding the RR1000DHKB crawler dumper. Fedpfxexvbw Te Aivopn This dumper offers excellent value for money, is available immediately, and—thanks to its compact design and high payload—is the ideal solution for small to medium construction sites, landscaping, and industrial applications. We are happy to advise you and assist with any questions regarding the SCHORR RR1000DHKB crawler dumper.

Condition: used, Year of construction: 1996, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, Mikron UMS 900 with internal coolant system and 4th axis Considering its age, the machine is in good condition and fully functional. A special feature is the machine’s internal coolant system and full-fledged 4th axis. In addition, it has an HF spindle from Fischer with a cooling unit that can be swiveled into position. Equipment: - X-axis 900mm / Y-axis 630mm / Z-axis 500mm - Table dimensions: 1200x600mm - Internal coolant system through the spindle - Spindle speed max. 6300 rpm with SK40 - 4th axis as a rotary table, Hoffmann RWC 160 with jaw chuck - Tool changer for SK and HSK tool holders - HF spindle Fischer 42,000 rpm with HSK40 - Electric handwheel - Full protective enclosure - Complete documentation available - Control cabinet very clean - Many tool holders included Fpjdpjz Iz I Hjfx Aivsn The screen is not defective; the black shadows are due to the photography. Several components have already been renewed, e.g., the spindle bearings; the Y-axis has been overhauled. The absolute special feature is the internal coolant supply through the spindle! If you have any questions or need more information, please send us a message or call us.