Used Masterwood Masterwood Ks 21.31 for sale (1,683)

Condition: good (used), Centrifugal pump, water pump, domestic water pump, garden pump, high-pressure centrifugal pump -Manufacturer: WILO, High-pressure centrifugal pump type Helix V1008-1/16/E/KS/400-50 -Power: 3 kW -Flow rate: l/h -p max: 16 bar -Number: 2x pumps available -Price: per piece -Dimensions: 250/240/H950 mm -Weight: 47 kg/unit Dkjdpfowyaryjx Ahgop

Condition: new, Number of motors , Stück 0 , mm Control , 0 cutting width 115 und 82 mm Cutting height 55 mm Motor output 2.0 kW machine weight ab. 45 kg Graule KS crosscut saw for cutting (glass) beads with a rebated joint with manual and electronic length stop Suitable for wood, PVC, aluminum ----- Brief manufacturer's description: - Crosscut and miter saw for precise and user-friendly cutting to length in the strip area - Sturdy gray cast iron construction - A double ball-bearing axle acts as a pivot point below the material support table, facilitating material cutting. The cut is always made at the rear top. - Quick miter adjustment up to 45° - Readjustable fixed stops at 90° and 45° - Upper saw blade guard can be connected to extraction system ----- Technical data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Max. cutting width: 115 mm (at 90°); 82 mm (at 45°) Max. cutting height: 55 mm Mitre range: 45° - 90° - 45° Saw blade diameter: 250 mm Extraction nozzle diameter: 45 kg ----- Technical description: Item 1.1 Crosscut and miter saw type KS, 2 kW, 400 V, 30/40 mm saw blade holder Item 1.2 Pivot point LEFT Item 1.3 Pneumatic material clamping for KS, on both sides of the saw blade, 2 horizontal pneumatic cylinders, controlled via roller valve during saw stroke, can be switched off Item 1.4 HM circular saw blade for wood 250 x 2.8 x 40 mm 80 teeth neg ----- ----- Price of the above machine on request! Plus packaging and shipping ----- Options with additional charge: Item 1.5: EUR 1,270.00 Digital electronic angle display for one axis, crystal display, 1.5 V battery power supply, reading via magnetic tape and magnetic sensor, resolution 0.1° Item 1.6: EUR 695.00 Machine stand for KS crosscut saw ----- Item 2.1: Electronic length stop with support plate EUR 7,290.00 Electronic length stop type RLE 2.0 m – with support plate Mounting side: LEFT Electronic length stop system for cutting strips Travel distance 1.8 m, overall length 2.0 m 10" touch display, 230 V connection Dedey T R Sqopfx Ahgjkp Feed speed 40 m/min Direct measuring system – repeat accuracy +/- 0.1 mm Working mode: (1) automatic absolute stop, (2) cutting lists, (3) pusher cutting lists, (4) step measurement, (5) fine adjustment Program memory for up to 999 cutting lists USB import and direct editing of cutting lists on the terminal Stop can be folded away to the rear With support foot Item 2.2: 295.00 EUR Support 2 m, right, 110 mm wide, with support ----- Item 3.1: Manual length stop EUR 600.00 Length stop 2 m, left, with 110 mm wide support, with scale, foldable stop slider and support Item 3.2: EUR 295.00 Support 2 m, right, 110 mm wide, with bracket ----- (Technical data according to manufacturer - no guarantee!) All prices quoted are net. Plus statutory VAT.

Condition: good (used), Eckold tool ECKOLD - KS 50 Dkodpfszc I Ersx Ahgep MACH-ID 3813 Make: ECKOLD Type: KS 50 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Equipment and technical specifications: - Grinding unit can be swiveled via hand crank - The machine base is made of welded steel, ensuring high torsional rigidity and vibration-free operation - Oscillating sanding belt with a separate geared motor for improved sanding results - Oscillation can be optionally switched on - Graphite-coated sanding shoe for longer sanding belt service life - Height-adjustable sanding table allows use of the full sanding belt width - Additional table for sanding radii with integrated extraction ports - Spring-loaded belt tensioning system automatically compensates for differences in belt length - Equipped with adjustable stops, making it ideal for veneer sanding - Veneer overhang can be easily sanded down - With mobile undercarriage - Oscillation motor power: 0.11 kW - Mains voltage: 400 V - Frequency: 50 Hz - Sanding belt length: 2,640 mm - Sanding belt width: 150 mm - Belt speed: 14 m/s - Oscillation stroke: 15 mm - Sanding surface length: 800 mm - Sanding surface width: 150 mm - Grinding unit swivel range: 0–45° - Worktable length: 950 mm - Worktable width: 450 mm - Worktable height adjustment: 110 mm - Dimensions: 1,700 × 1,000 × 1,150 mm - Weight: 300 kg Dedpfx Ahjwkbcbsgjkp Availability: short-term Location: Flörsheim

Condition: used, axle configuration: 3 axles, first registration: 12/2004, color: other, Year of construction: 2004, Empty weight: 8.280 kg Djdpfewl D Sbex Ahgekp Axle 1: left 5 mm right 5 mm Axle 2: left 5 mm right 5 mm Axle 3: left 5 mm right 5 mm

Condition: used, Year of construction: 2012, Technical data: Cutting range round / square / rectangular ø: 400 / 350 x 350 / 380 x 300 mm Saw blade dimension: 650 x 50 x 2.5 mm 3 stroke speeds: 40 / 62 / 90 strokes/min Drive power: 3.0 kW Footprint (WxDxH), approx.: 1800 x 650 x 1250 mm Weight, approx.: 1050 kg Equipment: - 3 stroke speeds - Infinitely variable cutting pressure adjustment - Minimum quantity lubrication - Pre-tensioned plate guide for the saw frame Dksdjydittopfx Ahgjp - Dustproof enclosed gearbox - Accelerated return stroke of the saw frame - Enclosed oil hydraulic system - Coolant device - Limit switch - Automatic lifting of the saw frame - Miter device up to 45° - 1 new saw blade

Condition: good (used), Code: 0311 Brand: CIT MECCANICA Model: V 25 / KS Dkjdpsynkt Ajfx Ahgsp Fully automatic and very precise sharpening and setting machine for band saw blades (normal and spaced teeth) and for sharpening for circular saw blades Technical features Minimum pitch of saw teeth 2 mm Maximum pitch of saw teeth 20 mm Maximum width of bandsaw blades 50 mm Minimum diameter of circular blades 110 mm Maximum diameter of circular blades 600 mm Grinding motor 0,12 Kw Main motor 0,20/0,25 Kw Teeth sharpened per min 35 and 70 Diameter of emery wheels 175 mm Speed of grinding wheel 3000 rpm Gear-box oil SAE 30 1,5 Kg Weight 115 kg

Condition: used, Year of construction: 1999, machine/vehicle number: 2632, Item No. 24108 Technical data: - Saw blade dimensions: up to 300 x 2.0 x 40 mm Dksdpfx Ajzibxwjhgop - 2 saw blade spindle speeds: 40 + 80 1/min - Cutting range: at 90° - Round: 100 mm - Flat: 120 x 85 mm - Miter adjustable: - Left: up to 45° - Right: up to 30° - Material clamping device - Drive: 400 V / 1.0 / 1.2 kW - Space requirement: approx. W 600 x H 800 x D 700 mm - Weight: approx. 180 kg

Condition: good (used), Year of construction: 1994, Working width 500 mm Working height 240 mm Motor output 4,0 kW Length of the planing table 2470 mm Number of knives 4 St. Dksdpfx Ahozfqknjgop Feed speed 7/14 m/min. machine weight ab. 1050 kg

Condition: used, Year of construction: 2002, Used machine Year of manufacture 2002 Edge sander with electromechanical oscillation with a 15 mm pendulum stroke of the motorized disc Swivel of the sanding unit by 90° using a hand crank (continuous angle adjustment; read off the scale) Additional table with extraction system for using sanding rolls Height-adjustable table for utilizing the sanding belt Motor 2.2 kW Oscillation motor 0.11 kW Table size 880 x 370 mm Belt dimensions 150 x 2580 mm Dimensions 1700 x 1000 x 1150 mm Weight 250 kg Dkedpfx Ahew I U Ahjgjp Availability: Short-term Storage location: Flörsheim

Condition: reconditioned (used), Year of construction: 2009, machine/vehicle number: SN FX036084, functionality: fully functional, 12 months warranty, in-stock item, immediately available, in excellent condition. Resistance-heated system with a gas-tight furnace chamber suitable for hardening, soldering, sintering, annealing, ashing, and preheating. - Tmax 800°C - Rod-type programmable controller SE-402 - 3-zone heating - Gas supply system - Max. gas operating pressure 7 mbar - Gas circulation - Gas supply system, vacuum-tight - Gas purging system - Vacuum system - Caution: no safety package installed! - Internal furnace chamber dimensions (W x D x H) 580 x 830 x 1500 mm (special length) - Furnace chamber volume approx. 722 liters - Max. load weight approx. 1000 kg - Two-stage rapid cooling with frequency converter - Afterburner with flame monitoring - Automatic shutdown / emergency purging in case of flame failure, not in case of power failure! - Viewing window DN150 - Max. gas operating pressure 7 mbar - Power supply 400V, 3 phases, N, PE - Heating power 70 kVA - Rated current 3x97A - Weight 1900 kg - External furnace dimensions (W x H x D) 1700 x 1950 x 2750 mm - Control cabinet dimensions (W x D x H) 510 x 1360 x 500 mm - Operating manual, electrical diagrams, CE declaration The furnace is offered as a refurbished unit. Electrically tested including measurement reports. Inspection in our warehouse by appointment! Dedpfxsyxlwre Ahgokp The furnace is not suitable for gas nitriding with NH2/ammonia! Furnace, furnaces, industrial furnace, melting furnace, annealing furnace, heat treatment furnace, sintering furnace, protective gas furnace, tempering furnace, hardening furnace, chamber furnace, brazing furnace, debinding furnace, de-waxing furnace, stress-relieving furnace, vacuum furnace, protective gas furnace.

Condition: excellent (used), CATALOGUE NUMBER 8017 TECHNICAL DATA - track width 335mm - arbor width 400mm - max. blade diameter 350mm - blade arbor diameter 80mm - max. cutting height 120mm - table width with clearance 700mm - table length 1720mm from above: - guides/pawls - roller, sliding pressure, metal - guides/pawls - roller, sliding pressure, metal - arbor with saw blades - sliding pressure arbor, metal 2 pcs from below: - pneumatic guide rail - sliding metal roller - guides/pawls - track - sliding metal roller, output Dkedpfxjzh Ik Re Ahgop - electric body lifting 0.35kW - manual arbor lifting with saw blades - central lubrication - stepless feed rate adjustment 1.5kW - main motor 30kW - laser 3 pcs - floating blade - additional sleeve for multi-blade saw - blade cleaning - diameter of dust extraction nozzle 260mm - overall dimensions L/W/H 2300x2000x2150mm - weight approx. 3000kg ADVANTAGES – German made – Floating blade – Laser 3 pcs – Blade cleaning – Additional sleeve for multi-blade saw – Pneumatically adjustable guide rail – Stepless speed adjustment – Used multi-blade saw, very good condition Net price: 136900 PLN Net price: 32595 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to fluctuations)

Condition: used, Year of construction: 2021, number of beds: 2, _____Basic equipment:Base frame for mounting on carrier vehicle with technical compartment for protected storage of components- 60001 GRP safety tank with baffle walls- 6-cylinder piston diaphragm pump with hydraulic drive from vehicle min. 40 l/min incl. 21/2" suction fitting with external suction via Storz C-coupling and pressure switch fitting- Spray bar with 1" stainless steel nozzle line mounted at the rear, incl. tip protection in front of spray bar- Manually operated triple nozzle holder for turning with 3-fold nozzle set for different application rates- Limit switch for safe filling- 2" external filling connection with Storz C-coupling and pressure switch fitting Manually operated triple nozzle holder for turning with triple nozzle set for different application rates- Limit switch for safe filling- 2" external filling connection with Storz C-coupling- Low-level drain tap with Storz C-coupling- Mechanical fill level indicator- Electro-pneumatic pressure filter flushing- Plug-on RKL at the rear- Position lights on spray bar left and right: front white, rear red- The nozzle carrier can be switched on and off pneumatically to prevent dripping- The application rate is controlled and monitored fully automatically via a Spray-Dos computerMore equipment:- Draw hook: base frame as draw hook design- Spray bar can be folded up- Spray bar 2.50 m- Pump capacity 320 l/min 2 1/2" suction filter Dkedpfxjuw Dnxe Ahgop

Condition: good (used), You are bidding on: a high-quality sheet metal shear and bending machine from a very reputable manufacturer – Schechtl. Features of the machine: Sheet metal shear HT 200 Capacity: 1.25mm steel, aluminum, etc. Cutting length: slightly over 2m Holder for round bar (properly attached to the machine; if desired, we also have round bars in various lengths available as an option) Extendable front support Invoice with VAT shown Bending machine KS – Capacity: 1mm steel, aluminum, up to approx. 1.5mm Bending length: slightly over 2m Foot clamp Optional: back gauge or beading device Attachment rail Round rollers and other rails According to §25a UStG The machines are in good used condition and are ready for immediate use. They come from a private owner and a small business (50/50). Important! Optionally, you can find and purchase many machines and machine accessories, such as various rails, back gauges – everything related to sheet metal and steel processing, including bending machines, sheet metal shears, drilling machines, round machining machines, slitting and profiling machines – accessories (beading device, round rollers for gutter production, back stop, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. Please feel free to contact us if you have any questions. You will receive an invoice according to §25a UStG, which includes the sales tax – differential taxation. Free loading is possible – weight approx. 750 kg and 650 kg. Dodpfx Ajzgua Aohgjkp Inspection and testing are possible and welcome after prior telephone arrangement. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 highways. Article number: Bending machine KS & HT.

Condition: good (used), Double saw for cutting side boards behind the canter. Good condition. Circular saw motors 2x 45kW; Saw spacing by hydraulic servos. Feed rate 60m/min. Dedetrxlkspfx Ahgekp

Condition: ready for operation (used), Year of construction: 1950, functionality: fully functional, Heidelberger KS cylinder printing press /// Die-cutting cylinder /// Letterpress printing. 38 x 52 cm, year of manufacture: 1950. Weight approx. 3500 kg. Runs very smoothly and quietly. Suitable for die-cutting and printing (comes with 3 sets of new rollers). Accessories: Die-cutting plate, 5 clamping frames. Large quantity of die-cutting dies. Optionally available: Shelf with blanking material, bars, locking tools, locking plate, and many die-cutting forms. Located on the ground floor. Assistance with loading (forklift) is possible upon request. Dodpfxozdiizs Ahgskp

Condition: excellent (used), functionality: fully functional, fuel type: electric, color: white, first registration: 01/2025, next inspection (TÜV): 02/2027, Year of construction: 2024, operating hours: 64 h, machine/vehicle number: 45691, BÖCKER trailer crane AHKe 30 KS €120,000.00 net Year of manufacture 2024, operating hours 64h, 200h in standby mode First operation 2025 TÜV (technical inspection) valid until 02/27 with 8.1 kW electric motor and Li-Ion battery Maximum payload: 1,500 kg Dsdpfx Ahsyxc Tdsgskp Maximum outreach: 30.00 m Working height up to boom: 22.40 m Extendable boom: 4.80 to 9.10 m Boom payload: 1,500 / 350 / 250 kg Telescopic arm angle approx.: 85° Boom angle hydraulically adjustable: 0 - 158° Hook speed approx.: 50 m/min Support base area on both sides max. L x W: 5.87 x 6.25 m Support base area on one side max. L x W: 8.18 x 3.98 m Vehicle dimensions L x W x H: 9.36 x 2.38 x 2.53 m Permissible total weight: 3,500 kg Maneuvering drive and automatic leveling via the radio control system Wider support wheels with additional air tires for improved driving characteristics Electric emergency lowering system Noise protection covers Special paint finish for the base mast/superstructure in Ford Frost White Turn signals mounted on the outriggers Rotating beacon mounted on the winch LED ambient lighting for maneuvering, 4-way LED reversing lights

Condition: used, sanding width 150 mm Dksdpfx Ahsy Umfvogop Motor output 1 kW tiltable up to 90 Grad Three-dimensional, swivel-mounted Löwer type KS 225 edge sanding machine for precise sanding of straight and curved wooden edges. The lightweight design and powerful motor enable a uniform sanding pattern with high removal rates. Ideal for small joineries, furniture construction and interior fittings. Possible applications: Horizontal edge, horizontal plane or vertical bevel.

Condition: used, Year of construction: 2024, New demonstration machine! List price: €4,938 net. The upper section is a heavy-duty cast iron design with an integrated three-phase motor, 380 V, 2.2 kW, 2850 rpm. The machine is equipped with an integrated switch-plug combination, motor protection switch, and main switch compliant with VDE standards. Dimensions of the sanding belt backing: 850 x 150 mm. The steel work table height is adjustable via spring tension. Belt dimensions: 150 x 2280 mm. The sanding belt backing is covered with a graphite slip lining. The machine is supplied with an assortment of sanding belts; also included in the scope of delivery are an angle and miter gauge. When connected to a central extraction system, the machine is dust-tested (GS) by Holz-BG Stuttgart for an airspeed of at least 20 m/s. Standard equipment includes: - tiltable 90-180°, - motorized belt oscillation, - small support table at the deflection roller, - pneumatic belt tensioning. Technical data: Motor power: 2.2 kW. Sanding belt size: 150 x 2280 mm. Sanding belt speed: 22 m/s. Table size: 750 x 350 mm. Space requirement: 1000 x 800 mm. Weight: from 180 kg. Extraction connection Ø: 100 mm. Storage location: Rieth. Dkedpfsx Hwpvox Ahgsp

Condition: used, mileage: 234,922 km, power: 115 kW (156.36 HP), first registration: 05/2007, overall weight: 5,800 kg, fuel type: diesel, color: orange, gearing type: automatic, emission class: euro4, total length: 5,460 mm, total width: 2,170 mm, total height: 2,750 mm, number of seats: 6, Equipment: ABS, parking heater, MB Vario 616D 668.3 /Tipper + flatbed + tarpaulin/ Superstructure HSW KS-2 Equipment: * Additional heater * Raised headlights * Snow plough mounting plate * Beacon (RKL) * Trailer coupling * Roof hatch Dkodpfx Aezflvlohgep +++Signs of use and operational wear+++Municipal first ownership+++

Condition: used, 2½-deck screening machine Screening area: approx. 1,900 x 6,500 mm Dsdpfjwwr Eyox Ahgekp Without drive (power requirement approx. 18.5 kW)

Condition: excellent (used), Catalogue number 7956 TECHNICAL SPECIFICATIONS - Max main blade diameter: 350 mm - Blade bore diameter: 30 mm - Max cutting height: 90 mm - Main blade adjustable up/down and at angle - Blade guard included - With side carriage - Cutting length on carriage: 1300 mm - Cutting width on guide: 1340 mm - Main motor: 4 kW - Table dimensions: 1100 x 1030 mm - Table dimensions with extension: 2100 x 1840 mm - With scoring unit - Max scoring blade diameter: 100 mm Dksdszc I Sxopfx Ahgjp - Scoring spindle diameter: 22 mm - Scoring motor: 0.55 kW - 3 spindle speeds: 4000, 5000, 6500 rpm - Dust extraction nozzle diameter: 125 mm - Dimensions (L x W x H): 3280 x 2340 x 1450 mm - Weight: 866 kg ADVANTAGES – Made in Poland – Blade guard included – With scoring unit – DTR technical documentation – Used saw, in very good condition Net price: 11900 PLN Net price: 2840 EUR (based on rate 4.2 EUR) (Prices may change with larger fluctuations)

Condition: used, Technical details: voltage: 360-730 / 50 V / Hz weight of the machine ca.: 0,150 t Dksdeu N Afyspfx Ahgop *

Condition: used, Technical details: cutting capacity: 1 mm round blank diameter max.: 1000 mm cutting capacity: 1 mm round blank diameter max.: 1000 mm Weight approx.: 0,2 t dimension machine xH: 2,0 x 0,5 x 1,4 m Application: manual cutting of round steel sheet parts upper blade Ø 69mm x 11mm; adjustment vertical 25mm with hand toggle lower blade Ø 74 x 15mm; adjustment NO = fixed Centering fixture with die The material is clamped manually with handle vertival 15mm. Displacement horizontal 500mm manual. Dkjdpfou Icqysx Ahgjp *

Condition: used, Year of construction: 1982, Technical details: Dedpfx Ahou Nilajgjkp cutting diameter: 120 mm dimensions of saw-blade: 425 x 30 mm cutting range 90 degrees: round: 120 mm height over floor: 800 mm electrical connection: 380 V / Hz. strokes per minute: 60 / 92 / 140 Hübe/min. total power requirement: 1,5 kW Overall size: ca. L:1,2 x B: 0,75 x H: 1,10 (Bügel angehoben) m Vice adjustable in longitudinal direction by loosening the nuts. Mitre cut and straight cut: 45° and 90° with cutting pressure and lifting hydraulics After the cut is completed, the machine switches off and the saw blade remains in the lowest position. Workpiece holder via fixed jaw and clamping jaw, with hand crank Coolant device in the base limit stop *