Used Müller Ze 500 - 12/12.2.1 (Uvv) for sale (38,167)

Condition: used, Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM Ibodezmwqkopfx Aatsa TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T

Year of construction: 2010, condition: excellent (used), Measuring column in a suitable transport case Ibodpfx Aofdzvaoatea Height: 500 mm Diameter: 120 mm Weight: 37 kg

Condition: excellent (used), Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm min. material length 800 mm max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm engine power 45 kW two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm Ibsdpfx Ajma Dkfoatsa roll diameter 70 mm receiving table 6200 mm chain width 60mm seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm weight 3000 kg

Condition: ready for operation (used), Baumüller BUS21-15/30-30-001, fully refurbished and tested by qualified personnel, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. Serial number: 89312467. Ibodpfsy T Utxox Aatsa

Condition: excellent (used), For sale: a Lenze GSN04-1NHAR geared motor with a three-phase Lenze DERA071-12 motor, 0.25 kW. The unit is 100% functional, tested, and ready for operation. The technical condition is very good. Visually, it has normal signs of use resulting from operation, as shown in the photos. This geared motor with a worm gear is ideally suited as a drive for conveyors, feeders, production machines, packaging machines, mixers, and many other industrial devices. Ibodpfozncq Sjx Aatja Technical data: Gearbox manufacturer: Lenze Gearbox model: GSN04-1NHAR Motor manufacturer: Lenze Motor type: DERA071-12 Power: 0.25 kW Supply: 3×220–240/380–415 V AC Frequency: 50 Hz Motor speed: 1365 rpm Output speed: 186.6 rpm Torque: 11 Nm Gear ratio: i = 7.5 Protection class: IP55 Insulation class: F Duty cycle: S1 Condition: 100% functional – tested. Normal signs of use visible on the housing. Sold exactly as shown in the photos.

Condition: excellent (used), For sale: a Lenze Extertal geared motor / Germany, with a GST04-2M VBR071C42 cylindrical gearbox and an MDEMA1M071-42 three-phase motor. The unit is fully functional, tested, and ready for operation. Its technical and visual condition is good – it only shows normal signs of wear resulting from use. The geared motor is ideally suited for driving conveyors, feeders, production machines, packaging equipment, and other industrial applications. Technical data: Isdpfezm T Ifjx Aatsba Manufacturer: Lenze Gearbox model: GST04-2M VBR071C42 Motor type: MDEMA1M071-42 Rated power: 0.55 kW Power supply: 3×230/400 V AC, 50 Hz Motor speed: 1405 rpm Output speed: 421.5 rpm Gear ratio: i = 3.333 Torque: 12 Nm Rated current: 2.40 A (230 V Δ) / 1.40 A (400 V Y) Power factor (cos φ): 0.77 Protection class: IP55 Insulation class: F Mounting type: B3 (flange) Standard: EN 60034

Condition: good (used), Technical data for the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in the scope of supply: 1x CS Sigma profile, used Isdpfeidchcox Aatsba Material color: sendzimir galvanized Overall length: approx. 5,500 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm

Condition: excellent (used), For sale: Bernardo KFM 500 M edge chamfering machine, designed for precise chamfering and deburring of parts made of steel, stainless steel, aluminum, and other metals. This machine is ideal for preparing parts for welding, removing sharp edges, and creating even chamfers. Its robust construction and adjustable chamfering angle ensure accurate and repeatable machining. The machine is sold with the operating manual and a set of cutting blades, as shown in the pictures. Technical data: Manufacturer: Bernardo Country of manufacture: Austria Model: KFM 500 M Year of manufacture: 07/2019 Machine number: PWA-190707 Type: edge chamfering machine Motor power: 0.55 kW Power supply: 400 V Ijdpjziww Njfx Aatjba Frequency: 50 Hz Rated current: 1.48 A Recommended protection: C16 Weight: 33 kg Application: The device is designed for: chamfering edges, deburring parts, preparing material for welding, machining steel, stainless steel, and aluminum, creating precise chamfers for welds. Included: Bernardo KFM 500 M chamfering machine, operating manual, set of cutting blades (shown in the pictures), other items shown in the pictures. Condition: The device is used and in good visual condition. Normal signs of wear and tear are visible, consistent with its use. The machine is sold exactly as it is and with all the components shown in the pictures.

Condition: used, Year of construction: 1983, internal diameter min / max: 10 / 250 mm grinding depth 400 mm external diameter max. 380 mm swing dia. 390 mm table travel max. 550 mm stroke of the table min. 2 mm rapid traverse 10 m/min table speed -stepless- 0 - 10 m/min rough adjustment 18 mm fine adjustment 4 mm max. workpiece weight 100 kg spindle head B 6 DIN 55021 spindle turning speed - stepless 15 - 1.500 U/min pivoting angle +/- 30 Grad spindle bore 50 mm power capacity 2 kW rapid traverse 0 - 250 mm/min stroke 70 mm power requirement 3 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 3,0 x 3,0 x 3,2 m Internal Grinding Machine Iodpfxevprxfo Aateba BAHMÜLLER - JES 12 - new control (July 2015)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, load capacity: 5,000 kg, Welding positioner with 5-ton load capacity, in excellent condition, complete set including dual foot remote control and hand remote control. Tilt and rotation speed steplessly adjustable from 0.05 – 1.0 rpm. Clamping plate diameter: 2.0 meters. Height when tilted to center approx. 1.18 m (plus pedestal 0.1 m). Height horizontal approx. 1.4 meters. Length 2.2 m, width 2.0 m. Ibjdpfx Asxxu Drsatoa

Condition: excellent (used), Year of construction: 2008, 300 kg load capacity welding rotary table, with hollow shaft diameter 125 mm with chuck 320 mm or 400 mm very robust Ibjdpjlamtbjfx Aatoa speed continuously adjustable from 0.15 to 5.0 RPM current transfer 350 A rotary table diameter 400 mm tilting up to 135° height in horizontal position 835 mm, when tilted up to the center approximately 735 mm length 850 mm x width 580 mm

Condition: good (used), Year of construction: 2005, Offer 26140 Technical data: Ibjdpfxezfhvzj Aatoa - Maximum load capacity with horizontal table: 350 kg - Maximum load capacity in all tilted positions: 300 kg - Diameter of the rotary table: 400 mm - Through-hole / hollow shaft: 125 mm - Rotary table can be manually swiveled left and right: 0 - 90° - Rotational speed, continuously adjustable: approx. 0.15 - 5.0 rpm - Right-hand and left-hand rotation - Electric foot switch - Welding current transmission: approx. 350 A - Power supply: 400 V - Table height in horizontal position: approx. 900 mm - Space required: approx. W 1150 x H 900 x D 800 mm - Weight: approx. 290 kg - Chuck size: 300 mm

Condition: used, empty load weight: 4,500 kg, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2015, next inspection (TÜV): 07/2025, loading space length: 4,800 mm, loading space width: 2,400 mm, loading space height: 1,000 mm, color: blue, Year of construction: 2015, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * Condition, see photos * Müller-Mitteltal 3-way tipper, type KA-TA-R 18.0 tandem * Tipper dimensions: 4,800 x 2,400 x 1,000 mm * Roll tarp * Air suspension * Disc brakes * Platform * Jost support leg * Payload 13,500 kg If a new TÜV inspection is required, we are happy to provide you with an offer from our partner workshops. Iedpfxowz H Nbe Aatoba Our offer generally does NOT include a new TÜV inspection, new DGUV, new SP, or new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure the buyer does not have any misconceptions regarding condition or suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and features of the goods/vehicles. Subject to alterations, prior sale, and errors.

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0550296, Offer 26149 Technical data: Ijdjy Tvdxspfx Aatsba - Pressing force: 125 t - Stroke: 340 mm - Table size (approx.): 1000 x 680 mm - Through-hole in table (approx.): 300 x 200 mm - Maximum installation height (approx.): 500 mm - Plunger surface (approx.): 600 x 300 mm - Dowel hole in plunger: 50 mm - Plunger adjustability: 75 mm - Stroke adjustment: 20 - 180 mm - Stroke rate: 80 1/min - Light curtain - Hydraulic clutch - Pneumatic damper - Two-hand operation - Central lubrication - Separate control cabinet with operating units - Pneumatic connection: 6 bar - Drive: 400 V / 16.5 kW - Space requirement (approx.): W 1700 x H 2900 x D 2700 mm - Weight (approx.): 9400 kg

Condition: good (used), Year of construction: 2005, Offer 25238 Technical Data: Iodewzigcjpfx Aatjba - Max. load capacity with horizontal table top: 350 kg - Max. load capacity in all inclined positions: 300 kg - Faceplate diameter: 400 mm - Through hole / hollow shaft: 125 mm - Faceplate manually tiltable left + right: 0 - 90° - Rotational speed infinitely variable: approx. 0.15 - 5.0 rpm - Right and left-hand rotation - Electric foot switch - Welding current transmission: approx. 350 A - Drive: 400 V - Table height in horizontal position: approx. 900 mm - Required space: approx. W 1150 x H 900 x D 800 mm - Weight: approx. 290 kg - Chuck: 250 mm

Condition: used, Year of construction: 1973, pressure 1600 t distance between columns 3160 mm ram stroke 1450 mm distance table/blankh.,max. stroke up,adjustm. up 2250 mm Ibjdjvxwhwjpfx Aatja table surface area 4000 x 2200 mm ram pressure 1000 t pressure of blank holder 600 t stroke of blankholder at the bottom 1000 mm stroke of blankholder with adjustment 0-100 mm 1450 mm blank holder size 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 275 / 400 mm ram surface 4000 x 2200 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled oil volume 9000 l total power requirement 390 kW weight of the machine ca. 250 t dimensions of the machine ca. 6,0 x 4,3 x 10,5 m Head press (1600 tons) of a press line with five subsequent presses (800 tons)

Condition: used, Year of construction: 1978, pressure 63 t throat 280 mm stroke 160 mm table surface area 560 x 500 mm ram surface 280 x 280 mm dayligth 400 mm oil volume ca. 360 l Iedpfxohbalne Aatsba total power requirement 22 kW weight of the machine ca. 4 t dimensions of the machine ca. 1,45 x 1,75 x 2,67 m - Workroom enclosure with Sick light barrier - Large ram with ejector and pin clamp - foot switch - Motorized depth stop in the cylinder

Condition: ready for operation (used), Tool turret 5603923WZ SN:1285 with 12 stations for EMAG VSC 200 DUO, manufacturer unknown, used, normal signs of wear, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Iedpfxezu Hvxe Aateba

Condition: ready for operation (used), Tool turret 5603923WZ SN:1286 with 12 stations for EMAG VSC 200 DUO, manufacturer unknown, used, normal signs of wear, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for packing and shipping costs separately! Ibjdozu Hv Ejpfx Aatsa

Condition: ready for operation (used), Tool turret 5603923WZ with 12 stations for EMAG VSC 200 DUO, manufacturer unknown, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please enquire for charges for packing and transport separately! Ibjdozu Hvrspfx Aatsa

Condition: good (used), mileage: 473,158 km, power: 368 kW (500.34 HP), first registration: 06/2019, fuel type: diesel, axle configuration: 10x4, wheelbase: 7,490 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: grey, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 10,090 mm, total width: 2,550 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 9,500 kg, Year of construction: 2019, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, power assisted steering, power mirror, - Brake booster - Differential lock - High beam headlights - Windshield - Low noise - Speed limiter - Air conditioning - Air horn - Rotating beacon - Rear view camera - Sun visor - Tool box - Power take-off (PTO) Technical Information Number of cylinders: 6 Engine displacement: 12,882 cc Axle Configuration Maximum front axle load: 10,000 kg Rear axle 1: Max. axle load: 10,000 kg Rear axle 2: Max. axle load: 9,500 kg Rear axle 3: Max. axle load: 9,500 kg Rear axle 4: Lift axle; Max. axle load: 10,000 kg; Steerable Weights Unladen weight: 19,025 kg Payload: 29,975 kg GVW: 49,000 kg Functional Body manufacturer: PIET RUIZEVELD REAR DUMP BODY WITH FLAPS Ibodpfozu Rw Hex Aatoa Dumper: Rear Condition Technical condition: good Optical condition: good Identification License plate: 20-BNK-9 IVECO TRAKKER 500 E6 10x4 DUMP TRUCK Geurts Trucks B.V. presents this exceptionally well-maintained and excellently serviced IVECO Trakker 500 Euro 6 10x4 rear dump truck. This vehicle was specifically developed for professional use in earthmoving, road and civil engineering, quarry operations, mining, and for the transport of heavy bulk goods. The Trakker is powered by a powerful IVECO Cursor 13 six-cylinder turbo diesel engine with 500 hp (368 kW) in combination with a fully automatic transmission, which combines maximum driving comfort with optimal power transmission. The robust 10x4 configuration ensures maximum traction and reliability – even under the most difficult operating conditions. General data * Manufacturer: IVECO * Model: Trakker 500 E6 * Axle configuration: 10x4 * First registration: 07.06.2019 * Emission class: Euro 6 * Mileage: 473,158 km * Engine power: 500 hp (368 kW) * Engine: IVECO Cursor 13, 6-cylinder turbo diesel * Transmission: Fully automatic * Cab: Day cab * Color: Original factory paint Chassis and drive The extremely stable chassis was designed for the highest loads in daily use on construction sites. Equipment: * 10x4 axle configuration * Air-suspended rear axles * Differential locks * High off-road capability * High payload * Robust frame construction * Optimal weight distribution * Excellent driving characteristics on the road and on construction sites Cab The comfortable day cab offers the driver an ergonomic and safe workplace. Equipment: * Pressurized system for dust-free cabin air * Air conditioning * Fully automatic transmission * Comfort driver's seat * Adjustable steering wheel * Electric windows * Electrically adjustable and heated exterior mirrors * On-board computer * Multifunction instruments * Central locking * Numerous storage compartments * Excellent all-round visibility Dump body The vehicle is equipped with a high-quality Piet Ruizeveld rear dump body, which was specifically developed for daily heavy-duty operation. Technical data: * Body manufacturer: Piet Ruizeveld * Type: Rear dump body * Body made of high-wear-resistant Hardox steel * Loading volume: approx. 26 m³ * Aluminum cover flaps * ...

Condition: ready for operation (used), Fanuc A06B-0730-B200 30P servo motor SN WN104700 + A290-0731-T500, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please enquire for price separately! ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Iedpfsrrqf Rsx Aatoba

Condition: ready for operation (used), Indramat TDM 1.2-050-300-W1-000 controller, serial number: 23450022128, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Ibedpfxsi Ebnce Aatsa

Condition: ready for operation (used), Indramat TDM 1.2-050-300-W1-000 controller, serial number: 23450022133, professionally and completely refurbished and tested, with a 12-month warranty. Fully functional. Scope of delivery as shown in the photos. Ibjdji Ebngspfx Aatoa

Condition: ready for operation (used), Siemens 6ES5102-8MA01 CPU 102 central processing unit, serial number as shown in the photo, professionally and completely refurbished and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please inquire about the price separately. Ibjdsi Ednwjpfx Aatsa