Used Log Rounder In Super Condition for sale (48,463)

Condition: as good as new (ex-display), functionality: fully functional, The ibg Ring Tester Large is engineered for automated crack inspection of bearing inner and outer rings with diameters ranging from 45 to 100 mm. The system conducts a structural analysis, followed by a line-scan inspection of the raceways as well as the inner and outer diameters, utilizing the eddyvisor C. After inspection, components are automatically classified and sorted as either OK or NOK. The testing unit is mounted on a durable metal frame designed for industrial manufacturing settings, featuring integrated compartments for the steel enclosures that house the measuring equipment and PLC (including Siemens PLC). Ppsdpfoy H Dkajx Ahljt Clean, upright components are separated, fed into a transport wheel, and accelerated into rotation via belts. At the inspection station, adjustable rollers provide lateral fixation while probes perform surface defect detection; thereafter, components are automatically sorted into OK and NOK. Prior to testing, rings must be free of particles and residual liquids. The system follows ibg’s good-part-only policy, with NOK samples reserved exclusively for checking detection sensitivity during test runs. Infeed height: 1550 mm; discharge height: 1220 mm. For further information, please visit our website.

Condition: as good as new (ex-display), functionality: fully functional, The ibg Ring Tester Small is designed for automatic crack detection in the inner and outer rings of bearings using the eddyvisor C. Both the raceways and the inner and outer diameters can be inspected by one or two probes through a line scan process. Following inspection, parts are automatically sorted into OK or NOK categories. The test system is mounted on a robust metal frame, making it ideal for production environments, and provides ample space for the steel cabinets that house the instruments and PLC (including Siemens SPS). The inspection system uses one or two probes to perform a line-scan inspection of the raceways and inner/outer diameters. Clean, upright parts are isolated and fed into a transfer wheel, where they are accelerated and rotated via belts. At the inspection station, adjustable rollers ensure lateral fixation while the probes scan for surface defects. After testing, parts are separated into OK and NOK categories. Rings must be free from particles and dripping fluids. System configuration is carried out using ibg’s good-part-only principle. NOK masters are only used to verify detection performance in test runs. Infeed height is 1350 mm, and outlet height is 1150 mm. For further details, please visit our website. Ppodpfey H Dghjx Ahlst

Condition: like new (used), we are interessted in buying obsolete electronic components, semi conductors microprocessors, etc Podpfx Ahsizi Twoljpt

Condition: used, Year of construction: 2001, machine/vehicle number: 5358, - Manufacturer Elmag Superfici - Type. TWIN SPRAY - Year of manufacture 2001 - Working width 1,300 mm - Working height 890 mm + - 20 mm - Operating side right - Price for overhauled machine - Gun drive in duo version - Dry extraction - Exhaust air output 8,000 m³/h - Belt transport system - Belt cleaning via roller cleaning system - With belt cleaning system - Belt cleaning, behind the machine, in the direction of travel, - With paint recovery - Gun control - Number of installed spray guns 4 pcs. - Spray guns type. Kremlin ATX - Airmix spray system - Supply air filter ceiling - Length 5,950 mm - Width 3,980 mm - Height 2,790 mm - Total connection 21 KW, 40 A - Volt, Hz 400 / 50 - Location, in stock _____ Pjdpfxjumvk Aj Ahlspt Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Condition: new, functionality: fully functional, machine/vehicle number: 251C14262819, Year of construction: 2025, load capacity: 1,500 kg, lifting height: 800 mm, construction height: 1,195 mm, fork length: 1,200 mm, empty load weight: 145 kg, total length: 1,650 mm, drive type: Handbetrieb, construction width: 540 mm, Scissor lift pallet truck Chassis number: 251C14262819 Ppsdpfx Aheyng Suslet Condition: New device Technical condition: New Front tires type: Vulkollan Front tires condition: New Rear tires type: Vulkollan Rear tires condition: New Description: Version: INOX-PLUS, manual transport and electric lifting, pump motor: 1.2 kW 12 V + load capacity: 1,500 kg up to 470 mm lift height, 1,000 kg up to 800 mm lift height, optimal user-friendliness, optimal stability, long service life INOX-PLUS version

Condition: ready for operation (used), Datalogic DS 350 A / DS350A T3-F2-8/DM - DS350A T3-F2-8 / DM barcode scanner with oscillating mirror, serial no. according to photo, used, normal signs of wear, 100% functional, scope of delivery according to photos Pedpei D Un Ajfx Ahlept

Condition: ready for operation (used), Adept 10330-10150 REV B control board, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Ppjdpfxji D Ttps Ahljt

Condition: new, functionality: fully functional, Equipment: CE marking, fume extraction, safety light barrier, Eckert Diamond Infinity – Fiber Laser for Precise Laser Cutting in Industrial Sheet Metal Processing The Diamond Infinity laser cutting system from Eckert impresses with its powerful fiber laser technology, high cutting quality, and efficient material usage – ideal for metalworking. The modern CNC control with a large touchscreen allows for easy operation and full control over all cutting processes. Application Areas: Mechanical engineering, steel construction, contract manufacturing Technical Highlights: ✔ High-precision laser cutting even with copper & brass Podpfx Aswqc R Tehlept ✔ Energy-efficient fiber laser with optional linear drives ✔ Fully automatable loading/unloading process possible ✔ Service & support in Germany ➡ Discover the Diamond Infinity now at Machineseeker – your solution for efficient CNC sheet metal processing.

Condition: new, Year of construction: 2025, Sharpening of woodworking tools The Profi Firmer ( piercing bag) and Planer knife grinding machine WOOD TOOL GRINDER WTG -1 - "Swiss quality" For an accurate and efficient work perfectly honed, razor-sharp cutting edge is a must. With our grinder to sharpen your tools " wood chisel (holly bag) , planer knives , chisels , chisel " , fast, easy , accurate and inexpensive ... Currently, the absolute cheapest PROFESSIONAL wooden tool grinder on the market! Ppodpfx Ahsb Dt Ixeljt Made in Switzerland Swiss Quality = Where the WOOD TOOL GRINDER is " WTG -1" used? • Wherever conventional wood is processed. • For example, in carpentry , joinery , • Carpeting , schools, trade schools , • schools / training workshops ... Base machine price : EUR 2050.00 (ex works , excl 8.0 % VAT) You win and this several times ! If you regrind a wood chisel or a hand planer blades by hand or with an " older machine " experienced artisans need 5 min or more per tooth , if not even longer and get a good result ! With the WTG you need just about 30 seconds per tool . In no time you grind even a whole set of tools. And that, too, without having any special knowledge or grinding years of experience . So the machine can pay for itself relatively quickly. But above all, can be obtained every year , high , variable costs for tools and grinding work to a minimum . Once in possession of a WTG machine, you just have to work with perfectly cut tools , which has a positive impact among others on the quality and speed of operation. Go with the time ... go with BERGER technology GmbH. Your direct contact persons : Grinding Technology : Marc Broennimann Kaindl, DAREX, HARICH, Vertex, Drill Doctor, METEOR, Optima, Tatar, Promac, Cuoghi, Avyac, Christen, MOTOM, VITAX, WASU, Ulrich Klingel, ISELI, Schneeberger, Lamallo,

Condition: good (used), Year of construction: 2021, Offered Equipment • Manufacturer / Model: AV Flexologic COSMOLINE 900 • Year of manufacture: 2021 Pedpsw Tc Upsfx Ahlept • Serial no.: 051121-1059 • Condition: Excellent – the machine was in active use up to the company closure and can still be inspected under power. Why choose the COSMOLINE 900? The COSMOLINE 900 is an inline washout and drying system for photopolymer plates. It is engineered to simplify and accelerate plate processing while delivering consistent, high-quality results. ✅ Fully automated inline operation – the operator loads a plate, and the machine automatically transports, washes, and dries it. ✅ Superior cleaning – robust water jet with soap mixture, multiple adjustable rotating brushes, plus a large counter-rotating brush for maximum cleaning coverage. ✅ Reliable finishing – an additional brush for removing residues; hot air drying leaves plates clean and ready for immediate use. ✅ High productivity – sensors measure plate dimensions for optimized processing, ensuring stable and repeatable results. ✅ Environmentally friendly – standard centrifugal cleaning system; optional membrane filter available to separate polymer from water. ✅ Flexible & customizable – machine settings can be adapted to individual production requirements. This system is ideal for label and packaging converters seeking dependable, spotless, and perfectly finished flexographic plates with minimal operator effort. Technical Specifications • Maximum plate width: 900 mm • Maximum plate height: 1,200 mm • Standard centrifugal cleaning system (sustainable solution) • Optional membrane filter for polymer recovery (not required for letterpress plates)

Condition: new, Year of construction: 2025, If you are looking for the right machine and not a toy, then you have come to the right place: Foil label - label printer - name plate machine Laser markers skyLASER Mark 500 - 2D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications (* Prices depending on the equipment, this is a brand new laser machine from our production) Pjdpfxscuiz Sj Ahlspt Our skyLaser Mark systems are used exactly where the conventional CO2 laser technology has its limits. Using the fiber laser with a wavelength of 1064nm, even the most filigree structures can be realized in almost any material. In contrast to conventional milling processes, the laser works without contact, without force and without tool wear. The advantages in your application are the geometric flexibility and high machining accuracy. This type of machining can be used regardless of the hardness of the workpiece to be machined. The flexibility of the system increases with the mobile work table, which can be adapted to your needs. You can easily integrate the system into your production line, or operate it as a stand-alone solution. Our skyLaser Marks deliver very precise and permanent markings (laser engravings) and are suitable for the special area of ​​laser metal and certain organic substances. The use of a variety of fonts, the application of barcodes, serial numbers, logos and pictures is easily possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of embossing stamps, engravings, inscriptions and complex, fine structures, the software is extremely user-friendly. Even very complex and complex marking tasks can be easily created on the supplied industrial PC. Precise positioning is done in no time at all, thanks to the optional observation camera for process tracking and software-based workpiece alignment. Since the system has hardly any wearing parts and is almost maintenance-free thanks to the IPG laser technology, it can be used especially for industrial applications as well as in continuous use. The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or 300x300 mm (F-theta lenses dependent / 3D option) Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Nominal laser power: 20W New: software-controlled, variably adjustable working width (X, axis max. 450mm depending on structure) New: software-controlled, variably adjustable working height (Z, axis max. 200/450 mm depending on the body) Optional other work areas - automatic material feed, etc. Air cooling due to low energy consumption Labeling speed: up to 8000 mm / s (SCANLAB dyn AXIS ® galvanometer scanners the SCAN cube ® 10 achieve labeling speeds of up to 640 characters per second.) Redundant security system Laser class: 1 or, depending on the configuration, laser class: 2 (through optional pilot laser) pfeifer-technology HQ mirrors and optics for perfect results, powerd by Scanlab (R) pfeifer-technology industrial PC including pre-installed control software New: incl. Laser Focus Finder New: incl. Process air control New: including suction control

Condition: new, Year of construction: 2025, travel distance X-axis: 390 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 300 mm, spindle speed (min.): 2,000 rpm, spindle speed (max.): 24,000 rpm, overall weight: 450 kg, tool diameter: 14 mm, warranty duration: 24 months, power: 2 kW (2.72 HP), If you are looking for a real machine and not a toy, then you have come to the right place: immediately ready for use, engraving, milling, drilling, for effective plastic and light metal processing. CNC DIN ISO G code milling machine including handy CNC control Working area: with T-slot table X=390mm Y=230mm Z=300mm Basic frame of the milling machine made of cast elements approx. 280kg with base cabinet for necessary machine assemblies such as cooling and power supplies / inverter and control approx. 170kg All axes with ball screws and 25 mm linear guides including dust protection and manual central lubrication for all axes including encoder-monitored axis drive! High-frequency spindle up to 24,000 rpm 2kW water-cooled Collet ER20 up to max. 14 mm milling tools - optional G code controlled minimum quantity lubrication - optional G code controlled suction - optional G code controlled vacuum table solution (* Prices depending on equipment, control and spindle, this is a brand new milling machine from our production) The milling machines are 100% manufactured according to customer requirements in our factory in Plauen! Illustrations show different equipment variants; You will receive a brand new milling machine from our production) Technical characteristics: · Drive system: high-precision ball screw · Working speed: max. 6000 mm/min x-y-z working area / travel range: 390 mm x 230 mm x 300 mm · Passage height: 300 mm x-y-z increment: 0.01mm/increment x-y-z repeatability: 0.02 mm · File formats: G-code, ISO data · HF milling spindle: 2.2 kW water-cooled, others optional · Spindle speed: 6,000 - 24,000 rpm Tool chuck ER20: Power connection: AC 240V, 50Hz · Power consumption: max. 2,600 W · Dimensions (WxDxH): 1300 x 850 x 1800 mm Ppodpfji Hb I Tsx Ahlot · Weight approx. 475 kg with base cabinet

Condition: excellent (used), Year of construction: 2005, I sell the combined tunnel for surface finishing Superfici Elmag Combiline. Configuration: 1-head roller coater Cleaning unit with dust exhaust system 2-head UV-drying tunnel Cleaning unit with dust exhaust system Model: Combiline. Working width: 1500mm Year 2005. Working hours: 4600 mthrs. Total length: 5,30m Pjdpeiuc R Hsfx Ahlopt Total width: 2,40m Weight: 4000kg Available immediately. Fully working.

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminum, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. Wps separators are used in the recovery of: non-ferrous metals from the recycling of electronic waste non-ferrous metals from car recycling metals from foundry waste aluminum in glass recycling processes Ppedpou Dg Uhefx Ahlst non-ferrous metals from steel waste non-ferrous metals from municipal waste Description of Operation: The material delivered by the vibratory feeder is placed on the conveyor belt of the eddy current separator. The separator belt transports the material toward the high-speed magnetic rotor. The magnetic rotor creates high-frequency magnetic field by using maximized system of alternating magnetic fields. The alternating magnetic field induces eddy currents in metals. These currents counteract the external field and lead to the rejection of colored metals outside the material stream. A divider installed at the end of the separator is provided for the separation of materials. The central magnetic rotor has been designed to handle the smallest materials, providing the ability to recover particles up to 1 mm in diameter. We also have larger sizes of eddy current separators - catalog in documents.

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10011575, Hello, I´m selling filling pellet machine VAI V5/10S Psdowxplmjpfx Ahlopt Fully automatic, Made in Italy Low used, fully function in good condition If you´re interested contact me on mail and we can call you

Condition: new, Year of construction: 2026, Upgrade your aluminium production to a high-technology, high-efficiency, high-safety saw. X45 is an advanced high-accuracy up-cut saw for small-profile cutting of straight or mitered aluminium parts up to ±85°. Two-hand button-press cutting with full saw guarding (including tunnels on each side) preventing access to the cutting area. Category 3 safety design with a dual-channel safety relay and a reset button. Electronically settable up-stroke point to any position (without a sensor) for shortest cutting distance. Advanced chip collection design with up to 94% chip collection efficiency and up to 8× less chips to clean from your saw / floor compared to traditional saws. • Ø450 mm TCT saw blade with powerful 3.0 kW drive motor • Ergonomic usage design with blade changed from the front of the machine • AS / NZS 4024:2014 Category 3 safety standard, with safety relay and two-hand cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • Electronic lockout of the blade / machinery panels preventing access to rotating assemblies also during spin-down. • Safety switch detection of opening of the access panels triggering an e-stop. • 2× vertical and 2× horizontal clamps with adjustable clamp pressures. • Adjustable saw mitre angle to ±85° Psdpfx Asv Iccfohljpt • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm points for chip collection • Optional 3.8 kW vacuum chip extractor

Condition: new, Year of construction: 2026, Fully automatic cutting of large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and aluminium feeding rates for maximum process productivity. • Automatic optimiser mode with aluminium laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture Ppsdjmdqwpspfx Ahlst • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture Model: A700 Length: 9 m Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and aluminium feeding rates for maximum process productivity. • Automatic optimiser mode with aluminium laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture Model: A700 Length: 6 m Material Length: 4680 mm Pushing capacity: 20 - 40 kg Software: Optimiser Ppodpfx Ahemdqwholet QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and aluminium feeding rates for maximum process productivity. • Automatic optimiser mode with aluminium laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Ppsdpfx Aomdqrkshlet • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture Model: A700 Length: 4.5 m Material Length: 3180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the aluminium profiles you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. Psdpfx Ahsmb U Tujljpt High-speed aluminium processing with precision PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø700 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture

Condition: new, Year of construction: 2026, Supercharge your aluminium cutting productivity with one of the most flexible, large-capacity saws around. A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the aluminium size you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Ppjdpfjmb U Tfsx Ahljt Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales

Condition: new, Year of construction: 2026, Fully automatic cutting of large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and aluminium feeding rates for maximum process productivity. • Automatic optimiser mode with aluminium laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture Model: A700 Length: 9 m Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES. Ppedpfx Aol Sm Npohljt

Condition: new, Year of construction: 2026, Fully automatic cutting of large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and aluminium feeding rates for maximum process productivity. • Automatic optimiser mode with aluminium laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture Model: A700 Length: 7.5 m Material Length: 6180 mm Pushing capacity: 20 - 40 kg Ppodpfx Aol Sm Ndohlot Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and aluminium feeding rates for maximum process productivity. • Automatic optimiser mode with aluminium laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Pedpfsl Sm I Iex Ahlopt • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture Model: A700 Length: 6 m Material Length: 4680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of medium-large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. Ppjdel Smt Espfx Ahlst • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales Model: A550 Length: 6 m Material Length: 4680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.