Used Koch 4.12 250X125X45Cm 1200Kg for sale (636)

Condition: used, Year of construction: 2018, functionality: fully functional, The dry air dryer from Koch is up for sale. Below are some technical details: - Designed for 135 kg/h for 7 machines - NEW PRICE of the system: €115,000 Model: CKT 500F, frequency-controlled version - 500 cubic meters/hour dry air - Touch panel control expansion for CKT/EKO dryers - Control system expansion integrated as a conveying system in CKT/EKO dryers, up to 16 points of demand Chsdpoy Amr Eofx Ai Roa - Containers: 1 x 200 liters; 4 x 150 liters; 2 x 60 liters, with cleaning door - Koch hopper heaters at 3 kW, 5 units - Koch hopper heater at 1.5 kW, 2 units - V2A extraction containers, 7 units - Stationary frames, 2 units - Economy system control for gentle material drying and maximum energy savings - Empty suction valves NW 40, double empty suction, 7 units - And much more...

Condition: reconditioned (used), We manufacture the original. We offer you a used, workshop-reconditioned granulator GA75 / 9 for sale. Chsdpfsh S U Rysx Ai Rsa - Motor power: 75 kW, new motor - 9 rows of rotor knives, 4 stator knives - new rotor with completely new bearings and new, hardened wear parts. Inquiries only from commercial businesses!

Year of construction: 2024, condition: new, +++++ We manufacture the original +++++ Machine parts for the pre-shredders VZ 120, VZ 110, VZ 90, VZ 55. Rotor shaft wear parts. Chedjfgiuzopfx Ai Rja Copper cable recycling machines. Made by Koch. Dortmund - Dorstfeld. Germany. Our non-binding offer: - Labyrinth rings - Dirt deflectors - Spacing rings - Rotor shafts Terms and conditions on our website. Our goal – to help you.

Condition: new, +++++ We manufacture the original +++++ Non-binding offer Copper cable recycling machine 1 unit GA 37-450 granulator cutting unit - completely assembled - incl. motor (37 kW) - with inlet hopper, outlet hopper, and belt guard - 1 set of knives (5 rotor knives and 2 stator knives) Chjdpfx Aijflkz Ho Rea - 1 screen - Mounting, system integration into your plant - ex works Our general terms and conditions apply.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, The mobile dry air dryer of type KKT dries hygroscopic granulates directly next to your processing machine, and is also equipped with a TYPE 608 conveying unit. The saturated dry air flows through two alternating desiccant containers, where it is re-dried. This creates ultra-dry air with a dew point of approx. -35 °C. Dry air dryer: KKT 100S Dry air flow rate: 100 m³/h Desiccant containers: both NEW Container volume: 200 liters Mobile design Convenient touchscreen menu navigation Cedpfx Aioyxay Ij Roha Conveying unit: TYPE 608 Number of material types: 1 Blower: 1.1 kW Capacity: 8.5 liters Voltage: 230/50

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: 7.50.1081, Schneider & Koch AOI TS-LV6 / LaserVision Twin LV6 Automated Optical Inspection System (used 2D/3D AOI for SMT circuit boards, fully functional, manufactured approx. 2014–2016, for precise inspection of components, solder joints, and paste) Test technology: Schneider & Koch Model: TS-LV6 AOI unit Cedpeyid Duefx Ai Rjha Fully operational

Condition: good (used), Various cooking equipment is for sale. More detailed information and pricing are available upon request. Please also specify in your inquiry which products you are particularly interested in. Available: 1 material hopper 4 drying ovens 25 separators 1 Koch CKT 500 dryer and several other products from other manufacturers such as Digicolor or Colortronic. See pictures. Prices exclude VAT. Cjdpfx Askzkz Rei Roha Inspection possible by appointment. Contact us, our team will be happy to assist you further. Trade-in or exchange possible! Machine buying and selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or would you like to sell yours? For more information or to contact us, please visit our website.

Condition: used, functionality: fully functional, For sale are 2 Koch CKT 1500 drying plants. One unit from 1999 with 4 drying containers (3x800l/1x1200l), and one unit from 2003 with drying containers (3x100l, 3x200l, 3x300l, 1x400l). The dryers are fully functional and still in operation, and can be inspected until mid-September. Sale is complete with piping, without Koch conveying technology. Price upon request. Chjdpfx Aijw Ry Axe Rja

Condition: good (used), Year of construction: 1992, Travel range, X-axis: 1500 mm Travel range, Y-axis: 420 mm Travel range, Z-axis: 400 mm Clamping area: 2 x 700 mm x 420 mm Max. table load: 800 kg Number of tools: 2 x 36 pieces Tool holder: SK 40 Rapid traverse rate: 25 m/min Weight: 9 t Space requirement: 6.50 x 4.5 x 3.1 m Low speed: 50 RPM High speed: 7500 RPM (stepless) Rapid traverse: 25000 mm/min Control system: Siemens Sinumerik 820 M GA 3 + 2 x single-axis stepper motor control Sama SFI Current clamping system: per station, 1 NC indexing head with counter bearing, support plate, rotary table, and hydraulic clamping, and 4-axis indexing head with rotary table in special design and separate NC control Clamping system: 4-axis indexing head consists of 4 x 2-jaw chucks, clamping pressure 12 bar, manufacturer: Hofmann HMR 4/kombi 294/4 Tool breakage monitoring system: Meutrsuix ATM B310 Renishaw measuring probe system (without probe) Coolant system with chip conveyor, filter system, and fine filter Chsdecph Tmopfx Ai Rja

Condition: new, machine/vehicle number: A2306/9210, The pneumatically working drawer clamp type Box V3.0 ensures a simple and fast assembly of drawers and frames. Thanks to its functional design, it is possible to press single parts as well as complete drawers with different connections. Chedpfx Aiegqfnze Rja This way, a perfect connection as well as shape of the drawer can be guaranteed. Because of the special clamping process, folding connections and drawer fronts with glass insets cannot be deformed. Maximum clamping power: vertical: 800 kg / horizontal: 800 kg Adjustable depth stops allow clamping of drawers with longer fronts Lateral press units slowly approach the workpiece Machine operation via joystick. Special equipment: - Digital positioning readout - Kit Door (for frontal clamping of drawer corners) Advantages: - High flexibility: Variably adjustable clamping unit for drawers and frames of different dimensions - Minimum set-up times allow high output - Intuitive operation - High safety standards due to CE-conformity e.g. 2-hand-operation - Plug & Play

Condition: new, machine/vehicle number: 22069, input voltage: 400 V, input frequency: 50 Hz, total length: 36,600 mm, total width: 9,400 mm, total height: 23,000 mm, overall weight: 2,100 kg, working height: 420 mm, The electro-mechanic case clamp VK011 allows a fast assembly of cabinets without having to make pre-adjustments on the clamp. The strong clamping plates of the VK011 enable all-over clamping of the cases to achieve the highest quality results. A clamping power of up to 2.300 kg can be generated in the press. - Vertical press plate (150 x 50 mm) - Horizontal press plate (150 x 50 mm) - Preselection of pressing time - Max. pressing pressure 1,800 kg (horizontal), 2,300 kg (vertical) - Machine operation via joystick - 2-hand operation Cjdpfx Aogqfpfoi Reha Advantages: - High flexibility:Pressing pressure is variably adjustable. Great variety of different cabinet dimensions possible - Maximum output due to positioning speed of up to 54 mm/sec (ECO up to 29 mm/sec) - Intuitive operation via joystick - High safety standards due to CE-conformity e.g. 2-hand-operation, security fence etc. - Sturdy design, linear guides and ball screws lead to the highest precision - Plug & Play

Condition: good (used), Year of construction: 2014, 2 pcs. KOCH glue gun, type: LP, year of manufacture: 2014 with Wagner high-pressure glue pump Automatic glue application (counter-hole gluing) Machine no. A1410/8413 Three-phase current 220 V/ 50 Hz Connection value 0.2 kW Pump type 18-40 Series no. D14 3042 Chedpfx Aiov Dvaps Rsa Max. material pressure 14.4 MPa Transmission ratio 18:1 Delivery rate DH 40 cc Max. air pressure 0.8 MP a Max. material temperature 80° Weight 100 kg (Subject to changes and errors in the technical data and subject to prior sale)

Condition: new, machine/vehicle number: 10000275, empty load weight: 130 kg, maximum load weight: 620 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,050 mm, loading space height: 440 mm, Year of construction: 2026, Car trailer, type U2, with loading dimensions of 105 x 205 x 45 cm. Lightweight aluminum trailer with a permissible total weight of 750 kg and a payload of 620 kg, including a 10-year warranty. Koch-Anhängerwerke has been manufacturing high-quality trailers made in Germany for over 30 years. Cedpoi R Hwfofx Ai Rsha Special features: 10-year warranty (unique) Double-walled, anodized aluminum side wall, 30 mm (unique) Side wall with cargo securing system in V2A stainless steel (unique) Very stable rear door latches made of V2A stainless steel (unique) Side wall fastening completely with 8 mm V2A stainless steel screws (unique) Three-sided lashing rail/handrail (unique) 2x M16 threaded tension anchors / sturdy threaded rods at the rear (unique) Additional equipment: Support wheel Rear door easily removable Floor panel: 12 mm thick, stable screen-printed floor, non-slip, waterproof birch plywood Axle and drawbar completely hot-dip galvanized, manufacturer ALKO Large 185/70 R13 tires, balanced and suitable for 100 km/h Steel sheet fenders, screwed on with 8 mm stainless steel screws 12-volt electrical system, 13-pole plug with reversing light Other Vehicle registration document / registration certificate part 2 Various accessories available at an extra cost! If you would like to purchase this trailer or have further questions, please use our internal box trailer reference number "No. 10000275".

Condition: new, functionality: fully functional, machine/vehicle number: 10000475, empty load weight: 180 kg, maximum load weight: 570 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,500 mm, loading space width: 1,250 mm, loading space height: 440 mm, Year of construction: 2026, Low-bed trailer 125x250cm, 750kg, "Type U4" Passenger car trailer Type U4 with loading dimensions of 125 x 250 x 45cm. Lightweight aluminum trailer with a permissible total weight of 750kg and a payload of 570kg, including a 10-year warranty. Koch Anhängerwerke has been manufacturing high-quality trailers made in Germany for over 30 years. Codpji R Hw Ajfx Ai Rsha Special features: Double-walled, anodized aluminum side wall 30mm (unique) Side wall with cargo securing system in V2A stainless steel (unique) Very stable rear door latches made of V2A stainless steel (unique) Side wall fastening completely with 8 mm V2A stainless steel (unique) Three-sided lashing rail / railing (unique) 2x M16 threaded tension anchors / stable threaded rods at the rear (unique) Additional equipment: Support wheel Rear door easily removable Stable screen-printed floor, non-slip birch wood, waterproof glued Axle and drawbar completely hot-dip galvanized, manufacturer ALKO Large 185 / 70 R13 tires, balanced and suitable for 100 km/h Steel sheet mudguards screwed with 8 mm stainless steel screws 12 Volt electrical system, 13-pole connector with reversing light Other Vehicle registration document / registration certificate part 2 Various accessories available at an extra charge! If you would like to purchase this trailer or have further questions, please use our internal box trailer "No. 10000475".

Condition: new, functionality: fully functional, machine/vehicle number: 10401475, empty load weight: 180 kg, maximum load weight: 570 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,500 mm, loading space width: 1,250 mm, loading space height: 440 mm, Year of construction: 2026, Product information "Koch covered trailer 125x250cm, height: 65cm, 750kg | Type U4" Covered trailer 125x250cm, 750kg, "Type U4" Car trailer with cover, Type U4, with a loading area of 125 x 250 x 65cm. Lightweight aluminum trailer with a permissible total weight of 750kg and a payload of 570kg, including a 10-year warranty. Koch-Anhängerwerke has been manufacturing high-quality trailers made in Germany for over 30 years. Csdpfx Aei R Hwxoi Rsha Special features: Double-walled, anodized aluminum side wall 30mm (unique) Side wall with cargo securing system in V2A stainless steel (unique) Very stable rear door latches made of V2A stainless steel (unique) Side wall fastening completely with 8 mm V2A stainless steel (unique) Four-sided lashing rail/rail on the cover (unique) 2x M16 threaded tension anchors / stable threaded rods at the rear (unique) Additional features: Rear door easily removable Base plate: stable screen-printed base, non-slip birch plywood, waterproof glued Axle and drawbar completely hot-dip galvanized, manufacturer ALKO Large 185/70 R13 tires, balanced and suitable for 100 km/h Steel sheet mudguards fastened with 8 mm stainless steel screws 12 Volt electrical system, 13-pin plug with reversing light Cover: solid aluminum with 8 mm V2a fastening Stable V2a cover lock at the rear with disc lock 2 stable V2a stainless steel hinges at the front 2 gas struts for easy opening Cover easily removable Other: Vehicle registration document / registration certificate part 2 If you would like to purchase this trailer or have further questions, please use our internal box trailer "No. 10401475".

Condition: new, functionality: fully functional, machine/vehicle number: 10200726, empty load weight: 410 kg, maximum load weight: 2,190 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 1,500 mm, loading space height: 440 mm, Year of construction: 2026, Koch trailer, 125x250cm, 750kg, "Type U4" with a 150cm high cover. Passenger car trailer, Type U4, with a loading area of 125 x 250 x 150cm. Lightweight aluminum trailer with a permissible total weight of 750kg and a payload of 570kg, including a 10-year warranty. Koch-Anhängerwerke has been manufacturing high-quality trailers made in Germany for over 30 years. Special features: Double-walled, anodized aluminum side panel, 30mm (unique) Side panel with load securing system in V2A stainless steel (unique) Very stable tailgate latches made of V2A stainless steel (unique) Side panel fastening completely with 8 mm V2A stainless steel (unique) Chjdpfxoi R Hw Ho Ai Rsa Four-sided lashing rail / railing on the lid (unique) 2x M16 threaded tension anchors / sturdy threaded rods at the rear (unique) Additional equipment: Tailgate easily removable Stable screen-printed floor panel, non-slip birch plywood, waterproof glued Axle and drawbar completely hot-dip galvanized, manufacturer ALKO Large 185/70 R13 tires, balanced and suitable for 100 km/h Steel sheet mudguards fastened with 8 mm stainless steel screws 12 Volt electrical system, 13-pole plug with reversing light 150cm high cover in gray Hook set mounted, hot-dip galvanized, also for net attachment Frame easily removable Other Vehicle registration document / registration certificate Part 2 Accessories available at an additional cost, see below. If you would like to purchase this trailer or have further questions about trailers, please use our internal box trailer quote "No. U4-HP150-Offer".

Condition: used, Year of construction: 1984, CNC Milling Machine Heckler & Koch BA 20 CNC Manufacturer: Heckler & Koch (Germany) Type: Vertical CNC Machining Center (Milling Machine) Control system: Depending on the version – Siemens, Heidenhain, or proprietary HK system (the photos show a panel with a monitor and traditional keyboard, most likely Heidenhain or Siemens Sinumerik control). Worktable: typically 2000 × 500 mm (designation BA 20 = 2000 mm table length) Working travels (X/Y/Z axes): X: approx. 2000 mm Y: approx. 500 mm Z: approx. 500–600 mm Spindle power: usually 10–15 kW Spindle speed: up to approx. 6000 rpm (depending on the version) Tool holder: SK40 or SK50 (SK40 holders visible in the photos) Tool magazine: usually 16–20 tools Cooling: via external coolant nozzle (flexible blue pipe visible in the photos) Total weight: approx. 6–8 tons Power supply: 400 V, 50 Hz, connected load approx. 20–25 kVA Applications: - Production of medium-sized metal parts - Defense, machinery, and automotive industries - Suitable for batch and single-piece production Chodpfx Asw Uac Hoi Rsa Equipment: control panel, keyboard, mouse, vices, guards 📌 Applications: - Metalworking - Batch and single-piece production - Metalworking shops, manufacturing plants

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, For sale: KOCH net saw—optimized for fast and precise trimming of furniture components, especially drawer sides. The machine ensures a clean, net cut (with no tears or edge defects)—a solution significantly faster than cutting on panel saws. Key features and specifications: - PLC control—automatic operation (separately retrofitted) - Buffer magazine for workpieces - Pusher beam on hydraulic system—feeds part to next operation - Maximum machine span: 2 m - Maximum feed speed: 12 m/min - Drive can be activated from both sides of the machine - Top scoring saw blades for cutting components from above - Spindle speed approx. 4,500–5,000 rpm (motors: 2,100 rpm) - Complete safety covers and safety sensors - Ready production of 'drawer ribbon' (final-sized drawer banding) The top saws are used for producing complete drawer bands (ready-to-install components). Example: a 640 mm long piece is surfaced/truncated from above and divided into 3 parts, so by adding the drawer front and bottom, you have a finished drawer without any additional side processing. Chjdpeyyyfyjfx Ai Rsa Performance: For a sample drawer side (350 x 100 mm): approx. 25,000–30,000 pieces per shift (highly efficient production). Location: Elbląg Loading is the responsibility of the buyer/assistance available on site. Please feel free to get in touch—I’ll be happy to answer any questions.

Year of construction: 2003, condition: good (used), dryer dry-air KOCH CKT 300, 300 m³/h, year: 2003, price: 6.900 €, contact: Mr. Rainer Eckerle Chodpfx Aied E N Nzs Rsa

Condition: good (used), Year of construction: 2008, Koch central controler SPS 16 Codpfx Aiew Hyuuj Rjha year 2008 price: €2,750.00 contact: Mr. Rainer Eckerle

Condition: good (used), Koch material separator 24 Volt price: 790 € contact: Mr. Rainer Eckerle Chedpfxev Rcnte Ai Rsa

Year of construction: 2001, condition: good (used), grav. feed unit and mixer KOCH Graviko 25 liter year: 2001 price: 4.200 € Codjhm Suxspfx Ai Rsha contact: Mr. Rainer Eckerle

Year of construction: 1994, condition: used, dryer dry-air KOCH CKT 300, 300 m³/h, year: 1994, price: 4.900 €, contact: Mr. Rainer Eckerle Chedpfx Aob Hu S Tji Rea

Year of construction: 2008, condition: good (used), grav. feed unit and mixer KOCH Graviko GK 60 2x gravim, 60 kg/h , year: 2008, price: 5.600 €, contact: Mr. Rainer Eckerle Codpfxsd E N N Uo Ai Reha

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, workpiece length (max.): 2,500 mm, workpiece width (max.): 700 mm, number of spindles: 40, TECHNICAL DETAILS Panel length min.: 170 mm Panel length max.: 2,500 mm Panel width min.: 50 mm Panel width max.: 700 mm Number of injectors: 2 Chedjyq Irhjpfx Ai Rja Number of support units: 2 Vertical spindles Speed: 2,800 rpm Number of spindles: 40 Horizontal spindles Speed: 2,780 rpm Number of spindles for horizontal drilling in Y-axis: 6 Number of spindles for horizontal drilling in X-axis: 8 (4 on each side) MACHINE DETAILS Control system: WINDOWS Motor power (vertical drilling): 3 kW Motor power (horizontal drilling): 2.2 kW Note: Tools not included The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 6106