Used Knuth Notching Machine for sale (64,635)

Condition: new, 3.0 mm ST 40 2.0 mm VA 90.0 Grad blade length 130 x 130 mm table: 640 x 460 mm work height max. 900 mm engine output pneumatisch weight 200 kg range L-W-H 600 x 670 x 1270 mm Properties: - Notching with burr-free cut, without deformation of the cutting edges Nedpfx Aaexcuxksaela - Machine body made of high-quality gray cast iron, base made of sheet steel - Cutting blades made of surface-hardened tool steel - Effortless work thanks to pneumatic drive - Operation using a foot pedal, so both hands are free for the workpiece - Large work table with integrated scales - T-slots for precise guidance of the pivoting stops - Protective cover in front of the cutting blade for high safety Scope of delivery - 1x set of cutting blades - 2x pivoting material stops - Plexiglas protective cover - Foot pedal - Base frame

Condition: used, Year of construction: 1996, 4.0 mm 3.0 mm 30 - 120 Grad blade length 150 x 150 mm work height max. 900 mm table: 1000 x 650 mm engine output 3.0 kW weight 850 kg range L-W-H 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one Nlodpfxexabpdj Aaaja tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out.

Condition: new, plate thickness max. 5.0 mm tube diameter 27.9 - 61.0 mm motor 400 Volt total power requirement 2.2 kW weight of the machine ca. 87.0 kg. Nlsdpfjxaardjx Aaaja The AL1-2E electric pipe notcher is started at the push of a button, and the pipe notcher is driven continuously. This means you can continue to work on new parts without having to switch the machine on again each time. With the electrically driven AL1-2E pipe notcher you can notch pipe outer diameters of Ø 26.9 (3/4?), Ø 33.7 (1?), Ø 42.4 (1 ¼"), Ø 48.3 (1 ½"), Ø 60.3 (2?). Do you often notch pipes? Then the electrically driven AL1-2E pipe notcher with the 2.2 kW electric motor is just right for you. The motor forms a unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with 0-voltage protection and a protective cap. Equipment: - electric motor pipe notching machine - for pipes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm - operating instructions

Condition: used, Year of construction: 1990, Technical details: plate thickness: 8 mm cutting range: 300 x 300 mm table-size: 1100 x 900 mm Njdpfxsu Ictbo Aaasla voltage: 380 V / Hz Weight approx.: 1,7 t dimension machine xH: 1,3 x 1,2 x 1,5 m For notching of 90° sheet metal segments, works hydraulically. On the table are 2x rulers 300mm 90° offset. T-slot according to DIN 680: a=12mm, h=21mm, b=22mm, c=14mm with length = 1x 330mm and 2x 700mm Operation via control panel and foot switch *

Condition: excellent (used), Year of construction: 1999, power: 5.5 kW (7.48 HP), input voltage: 400 V, We offer this very well-maintained Indumasch VA 200/6 K notching machine, year of manufacture 1999. Rated voltage: 400 V Njdpfx Aaoyrytmjasla If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 788 € 3/4" 26,9 mm, 1" 33,7 mm, mm 3 mm 2.5 mm 8 kg Nljdpfsyq Svdox Aaaoa The AL 1 can be used to notch pipes with an external diameter of 26.9 mm (3/4"), 33.7 mm (1") and 42.4 mm (1 1/4"). The hand-operated machines can be easily wall h ALMI pipe notchers filing or milling pipes has become a thing of the past. The major benefit of this pipe notcher, compared to other notchers, is that one unit can be used to notch a series of diameters without needing to change parts for each diameter. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 1032 € Nlsdpfx Aaeyq Su Teaea 1 1/4" 42,4, 1 1/2" 48,3 mm 3 mm 2.5 mm 15 kg The AL 3 can be used to notch pipes with an external diameter of 42.4 mm (1 1/4”) and Ø48.3 mm (1 1/2”). ALMI products are subjected to stringent quality control inspections before they leave the factory. ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use. Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande Nsdpfxoyq Su Hj Aaajla 951 € 1 1/2" 48,3 mm, 2" 60,3 m mm 3 mm 2.5 mm 15 kg The AL 2 can be used to notch pipes with an external diameter of 48.3 mm (1 1/2") and 60.3 mm (2"). ALMI products are subjected to stringent quality control inspections before they leave the factory. ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use. Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 853 € 20 - 76,1 mm 3 mm 2.5 mm 7 kg The ALU can be used to notch a sink outflow in pipes with an external diameter of 22 mm to 76 mm. Since ALMI pipe notchers have a favourable price and high productivity they are an excellent investment. ALMI pipe notchers are available for cutting out venting slots in round and rectangular met pipes with an external diameter from 27 mm upwards and a wall thickness of a maximum of 3 mm. Nedpfx Asyq Snyjaaela All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are immediately available.

Condition: used, Blockrückenfräse (Einkerbmaschine) - Block Back Cutter and Notching machine Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Njdpfjt Drmnjx Aaajla

Condition: used, Year of construction: 1997, machine/vehicle number: 79, Abstanz- und Einkerbmaschine / Cutting and Notching machine Schmedt PräCut 65Baujahr / Year 1997 - Serial-No. 79 Book block height: up to 350 mm Nedpelg Aahofx Aaasla Book block thickness: up to 90 mm Air supply: 10 bar Power supply: 400 V / 50 Hz / 1,6 kW (three-phase) Output: approx. 250 - 350 pcs / hour Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: as good as new (ex-display), Year of construction: 2026, Demonstration machine. Like new. The machine is fully equipped with: - large, comfortable table - Inside fence with adjustment scale and quick adjustment for cutting strips. - 4 locking precision stops with sliding and interchangeable stop bars 500 mm long. - 2 left and 2 right T-slots parallel to the blades - Plexiglass protection for clear notching - Lift release with freely movable foot pedal - Three stroke types: set-up stroke, single stroke and continuous stroke - 1 front cross stop system consisting of T-slot and scale - 1 left and 1 right scale, parallel to the knives - 1 left and 1 right guide rail for notching magnification over 225 mm - 2 hold-down devices Nodpofhw N Iefx Aaasla Two stations: Station 1 Disengage: cutting capacity: - 225 x 225 x 6mm in ST 45 - 225 x 225 x 4mm in stainless steel Station 2 punching with trump tool and/or cutting in thirty degrees max 4mm St45 max 3mm stainless steel Throat: max. 100mm

Condition: good (used), functionality: fully functional, Year of construction: 1997, Used variable angle notcher by Euromac Nlsdpfx Aaex E U Awsaoa Type Multi 220 6 Capacity 220 x 220 x 6 mm Equipped with radius cutting punch at the rear side

Condition: used, Technical details: Njdpfxju Icq Tj Aaasla total power requirement: 2,2 kW table-size: 500 x 780 mm working area: 250 x 250 mm height over floor: 940 mm voltage: 380 V / Hz Weight approx.: 0,642 t dimension machine xH: 1,0 x 1,3 x 1,2 m HYDRAULIC NOTCHING MACHINE On the table there are left and right 90° linear scales length 250mm stop bars length 400mm; angle adjustable left/right 90°) operated by switch button and/or hand/foot control incl. tool 2x upper and lower knives built in (knife length 250mm) *

Condition: excellent (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: 398, control type: manual, degree of automation: manual, actuation type: hydraulic, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, input frequency: 50 Hz, type of input current: three-phase, overall weight: 900 kg, cutting length (max.): 150 mm, Equipment: angle stop, foot remote control, Cutting performance (90° notch) - Normal steel: 4.0 mm - Stainless steel: 3.0 mm Cutting angle: 30-120° Cutting length: 150 x 150 mm Working height: 900 mm Table: 1000 x 650 mm Motor power: 3.0 kW Weight approx. 900 kg Dimensions: 1250 x 1000 x 1160 mm (LxWxH) Equipment: - Angle adjustment 30° - 120 ° continuously Nodpfx Aovk I Avjaasla - 2 digital displays for the adjustable stops * Set-up stroke * Single stroke * Continuous stroke - Plexiglass protection for better transparency - Hardened blades also for cutting stainless steel - Adjustable stroke height setting - Removable cutting container - Freely movable foot switch BOSCHERT angle adjustment: - the one-piece 30° The upper blade is directly connected to both a left and a right lower blade within a tool - for each notch over 30°, the notch is made once to the left and once to the right. - the swivel adjustment is carried out pneumatically immediately after the first notch has been completed. The machine can be demonstrated on site with power on. All information is provided without guarantee. Subject to errors and prior sale.

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Nlodpjmck Ryjfx Aaasa Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Year of construction: 1994, condition: excellent (used), Hydraulic notching machine Fab. BOSCHERT Type. K30-120 Very good condition, year 1994 Nedpehygztofx Aaaola Technical data Make BOSCHERT Type: K30-120 Year of manufacture: 1994 cutting capacity: 6 mm in St 40 / 4 mm in Niro blade length: 200 mm cutting angle: 30-120 working stroke: 40 mm table height: 900 mm Connected load: 6 kVA weight: approx. 1600 kg dimensions: approx. 1500 x 1200 x 1300 mm All data without guarantee. The machine is in a very good condition. A demonstration under power is possible at any time in our exhibition hall.

Condition: good (used), Notching milling machine Nljdpfx Asb A Hlaoaaja -automatic hydropneumatic milling feed -for milling cutters max.: Ø 250 mm

Condition: good (used), Notching milling machine -automatic hydropneumatic milling feed Nlsdjb A H Hfjpfx Aaaja -Maximum cutter diameter: 250 mm

Condition: good (used), Notching machine, sheet metal notcher, notching shear, corner notching machine, corner shear, corner shear -Max. cutting capacity: approx. 2 mm Nlsdpfx Aodf U S Ajaasa -Blade length: 102 mm -Dimensions: 620/590/H1790 mm -Weight: 150 kg

Condition: good (used), Year of construction: 1995, Automatic notching machine for cross joints (see attached prospect for technical data). Second-hand machine in good condition, tested in our workshop before delivery. Nljdpfoyr A Umsx Aaaja

Condition: new, messurements (LxWxH): 0,80 x 0,85 x 1,20weight approx.: 0,610total power requirements: 4sheet thickness: 6Details: Hydraulic drive, 6 mm at 90° (fixed) Nlodpod Ab Icjfx Aaaoa Blade length: 200 mm Notching angle: 90°

Condition: used, Year of construction: 1999, plate thickness 3-4 mm pressure 0 t Cutting length 220 mm table height 900 mm quantity of oil 35 l Table dimensions 950 x 790 mm total power requirement 4 kW weight of the machine ca. 0,95 t dimensions of the machine ca. 1,0 x 0,86 x 1,2 m Foot switch angle adjustment 30°-140° Njdpfx Aaeynbczoasla automatic cutting gap adjustment

Condition: used, Year of construction: 1983, plate thickness 4 mm blade length 220 mm pressure 0 t weight of the machine ca. 1,5 t dimensions of the machine ca. 1,6 x 1,7 x 1,6 m total power requirement 2,5 kW Combined notching machine with a fixed 90° angle and an adjustable rectangular notching unit variable up to 200mm length x fixed 100mm width. There are 2 manually adjustable stops with a digital display. Axle length X900mm / Y300mm There is no stamp holder / punch / hold-down device for this. These parts can be purchased from Boschert. Nodeynbcujpfx Aaaola

Year of construction: 2001, condition: ready for operation (used), A notching saw Elumatec for post-and-beam profile combinations is available. Lower saw blade: diameter: 550mm, tilt range: 45°-60°, max. cutting height: 210mm, speed: 2800rpm, power: 3kW. Upper saw blade: diameter: 500mm, tilt: 60°, max. notching depth: 190mm, speed: 2800rpm, power: 3kW. Stroke: 830mm, working height: 990mm, swivel left/right: 30°/30°. Machine dimensions X/Y/Z: approx. 3000mm/1450mm/1600mm, weight: approx. 1250kg. Documentation available. An on-site inspection is possible. Nledpfx Aasw Nykgsasa