Used Kern Kraft Kkf470/6 for sale (50,163)

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Dodpfjg Ailcex Aa Isku Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: new, CASADEI PS 63 TERSA thickness planer, Holzkraft CASADEI Robust machines for professional craftsmen Motorized thickness table adjustment with two speeds. Numerical display for work height. Thickness table made of cast iron. The thickness table is mounted on four large trapezoidal thread spindles for maximum stability and precision. Four feed speeds. Optional with two rollers in the thickness table. Standard with noise and chip protection curtain at the workpiece infeed and outfeed. Roller pressure adjustable. Front infeed roller with helical gearing. Outfeed roller with rubber coating. Powerful industrial motor. Dedpou T Hq Esfx Aa Ieku You will receive a 3-year Stürmer guarantee on this item upon online registration. The guarantee is only applicable to end customers in Germany and Austria. Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Technical data & equipment: Dimensions and weights: Length (product) approx.: 1305 mm Width/depth (product) approx.: 1080 mm Weight (net) approx.: 750 kg Dust extraction connection: Dust extraction nozzle diameter (thicknessing): 150 mm Installation information: Space requirement length: 1305 mm Space requirement width/depth: 1080 mm Space requirement height: 1197 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length: 1305 mm. Machine body width/depth: 725 mm. Working area length: 1000 mm. Working area width/depth: 2000 mm. Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thicknessing: Thickness table length: 630 mm. Thickness table width: 1000 mm. Work height (thicknessing) min.: 3.5 mm. Work height (thicknessing) max.: 300 mm. Working length (thicknessing) min.: 210 mm. Maximum chip removal (thicknessing): 8 mm. Electrical data: Power of drive motor: 9 kW. Connection voltage: 400 V. Mains frequency: 50 Hz. Planer cutterhead: Cutterhead type: TERSA. Cutterhead diameter: 120 mm. Number of cutter blades: 4 pcs. Cutterhead speed: 4500 min¯¹. Planing width max.: 630 mm. Feed: Feed speed: 5/8/12/18 m/min.

Condition: used, Year of construction: 2025, Used Machine Year of manufacture: 2025 Condition: like new, delivered in December 2025 Features and Technical Specifications: - Solid worktable made of heavily ribbed gray cast iron for maximum stability and durability - Sturdy base frame made of welded steel—guarantees high torsional rigidity and vibration-free operation - Precision format sliding carriage made of anodized aluminum—smoothly guided by a high-quality ball-contact system - Carbide guideways—for lasting precision and minimal maintenance - Swiveling cast iron saw unit with dual segment guide - Exact zero-point swivel for maximum cutting accuracy - Solid rip fence with round bar guide - Equipped with a sliding eccentric clamping device - Integrated miter cutting device on the sliding carriage—for fast and precise miter cuts - Scoring unit with belt drive - Format sliding table length: 2600 mm - Trimming length: 2600 mm - Format sliding table width: 360 mm - Table length: 940 mm - Table width: 560 mm - Cutting width with rip fence: 900 mm - Max. crosscut width to the left of the saw blade: 3200 mm - Saw blade tilt: 90–46° - Max. cutting height at 90°: 100 mm - Max. cutting height at 45°: 71 mm - Saw blade diameter: 315 mm - Speed: 4,000 rpm - Scoring blade diameter: 120 mm - Scoring blade speed: 9,000 rpm Dkodjzk N Txepfx Aa Iou - Motor: 6 kW Weight: approx. 560 kg

Condition: good (used), functionality: fully functional, Year of construction: 2008, Well-maintained, used plate shear from LVD. Djdpfx Aoz Dwtqea Ieku Type CS 3100 / 6 Capacity: 3100 x 6 mm Electrically adjustable back gauge and cutting angle Manually adjustable shear gap Rear safety guard

Condition: used, Year of construction: 1994, operating hours: 5,979 h, lifting height: 3,450 mm, fuel type: diesel, mast type: duplex, fork length: 1,200 mm, Year of manufacture: 1994 Empty weight: 6.385 kg Lifting capacity: 4.000 kg Mast type: duplex = Additional options and accessories = - Closed cabin - Heater - Particulate filter = Remarks = = Additional options and accessories = - Cushion tyres Dsdpfxoz I A D Ae Aa Isku - Free lift - Particulate filter - Roof window = More information = Please contact Bas Sindorf , ) for more information

Condition: good (used), functionality: fully functional, fuel type: diesel, operation weight: 4,733 kg, maximum load weight: 2,760 kg, Year of construction: 2020, operating hours: 2,051 h, machine/vehicle number: WNCD2401VPAL01060, Customer service recently performed. Dkjdpfxez N A Tbj Aa Ieu DUAL VIEW Cab Rearview camera Rotating beacon, LED Tires: Mitas 405/70-20 MPT-01 Tilting dump body

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, 1 x Parts Washing Machine Kraft K 20 Year of manufacture: approx. 1990 In very good condition Technical data: Drum capacity: 40 litres 24 rpm Dimensions (L x W x H): 0.7 x 0.8 x 0.65 m Dodpsx Hffrjfx Aa Isku The machine can be inspected under power.

Condition: used, mileage: 1,065,000 km, power: 204 kW (277.36 HP), first registration: 04/2015, fuel type: diesel, overall weight: 21,000 kg, axle configuration: 2 axles, next inspection (TÜV): 04/2027, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Additional information: * Load capacity: 13,262 kg * Width: 2,540 mm * Length: 5,990 mm * Type | Front axle: Goodyear R * Tire size | Front axle: 385/55 R22.5 * Tire tread depth (inner, left) | Front axle: 20% * Tire tread depth (inner, right) | Front axle: 20% * Maximum axle load | Front axle: 8,000 kg * Type | Rear axle: Bridgestone R * Tire size | Rear axle: 315/70 R22.5 * Tire tread depth (outer, left) | Rear axle: 20% * Tire tread depth (inner, left) | Rear axle: 20% * Tire tread depth (outer, right) | Rear axle: 20% * Tire tread depth (inner, right) | Rear axle: 20% * Maximum axle load | Rear axle: 11,500 kg * Wheelbase: 380 cm * Cabin: Yes * Position | Front axle: Front * Brand | Front axle: Other * Brake type | Front axle: Disc brakes * Suspension | Front axle: Parabolic springs Dodpfx Ajz Nuu Dea Ieku * Steering | Front axle: Yes * Position | Rear axle: Rear * Brand | Rear axle: Other * Brake type | Rear axle: Disc brakes * Suspension | Rear axle: Air suspension * Reduction | Rear axle: Single reduction * Twin tires | Rear axle: Yes * Driven | Rear axle: Yes * Differential lock | Rear axle: Yes Additional features: * 2-pedal control * Adaptive Cruise Control * Aluminum fuel tank * Trailer coupling * Anti-lock braking system (ABS) * Traction control system (TCS) * DAB radio * Roof spoiler * Differential lock * Electric windows * Electrically adjustable exterior mirrors * Electronic Braking System (EBS) * Electronic Stability Program (ESP) * Cruise control * Website * Air conditioning * Refrigerator * Air suspension * Fog lights * Parabolic suspension * Particle filter * Radio/CD player * Disc brakes Semtrade B.V. Contact | Martin Klaaijsen | Tel: | WhatsApp: | Email: Export costs | We kindly request that you inquire in advance about the costs and procedures applicable in your respective country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale and errors.

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 360 mm, spindle bore: 105 mm, turning diameter: 500 mm, center width: 1,500 mm, rotational speed (max.): 1,600 rpm, New conventional lathe DLZ 560x2000 with extensive accessories. Main Technical Data: Max. turning diameter over bed: mm Ø500 Max. turning diameter over cross slide: mm Ø310 Max. turning diameter in gap: mm Ø720 Bed width: mm 405 Max. workpiece length (between centers): mm 1500 Max. turning length: mm 1350 Effective gap length: mm 230 Spindle Spindle nose: D8 Spindle bore: mm Ø80 Spindle taper: M.T. No.7 Metric Ø113 1:20 Spindle speed (steps): 12 speeds Dkodpfoyak Evex Aa Isu Spindle speed range: rpm 36–1600 Further technical details available in the attached document. Main Features: - All-inclusive price with 2-axis position indicator (SINO – General importer in Germany), installed, and powerful 7.5 kW drive - Heavily ribbed machine bed for excellent vibration absorption, even during roughing operations - Extra-wide, induction-hardened and ground guideways for long service life and high precision. Max. workpiece weight up to 500 kg - Electrically interlocked chuck guard - Equipped with adjustable micrometer stop and overload clutch - Hardened and ground gears with oil circulation lubrication for powerful and quiet spindle drive - Precision spindle bearings for high concentricity and accuracy - Clearly arranged, ergonomically designed controls - Single-lever operation for cross feed, longitudinal feed, and rapid traverse for X/Z axes on the carriage - Precise gearshift for speed and feed selection - Finely graduated feed rates and thread pitches - Main spindle gearbox with electromagnetic clutch - Major electrical components by renowned European manufacturers, e.g. Telemechanique - Comprehensive standard equipment including Multifix tool post, chuck, faceplate, 3-axis digital readout, steady rests and much more - All machines are tested by our service engineers prior to delivery Additional models (also with cycle control) available on request. Contact us today and discover the world of innovative turning technology! Our services for you: • On-site consultation and solution finding • Organization of machine transport to your facility • Installation, commissioning, and turnkey handover • Financing and support with subsidy applications via KFW, BAFA, and more

Condition: used, functionality: fully functional, machine/vehicle number: 516210E00866, Year of construction: 2015, operating hours: 14,299 h, load capacity: 1,500 kg, lifting height: 6,600 mm, free lift: 2,400 mm, fuel type: electric, mast type: triplex, construction height: 2,860 mm, drive type: Elektro, Electric 3-wheel forklift truck Fahrgestellnummer: 516210E00866 Mast type: Triplex Technical condition: very good Battery Volt: 48V Battery Ah: 575Ah Battery year of construction: 2014 Description: Still RX20-15 No.: M0214 Year of construction: 2015 Operating hours: 14299 The device is visually in good and technically in good condition. Charger on request. Subject to errors and prior sale. If you have not found your truck, please contact us. We still have a large selection of other devices on site. Sideshift, 3rd valve, Dkodpfxeuhxx Dj Aa Iou

Condition: good (used), functionality: fully functional, fuel type: diesel, overall weight: 10,355 kg, operation weight: 4,335 kg, maximum load weight: 6,000 kg, Year of construction: 2019, operating hours: 1,737 h, machine/vehicle number: WNCD2401JPAL00620, DUAL VIEW Canopy Rearview camera Djdpfx Asz Ny E Uea Ieku 360° warning light, LED Tilting dump body

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, control type: manual, sheet thickness (max.): 6 mm, Equipment: emergency stop, finger protection, foot remote control, Techna – Fab Swing Beam Guillotine Model: QC12Y-6 x 3200mm Year: 2007 Max. Cutting Length: 3200mm Max. Cutting thickness: 6mm Machine with: Power Back Gauge Squaring Arm Dodpjzv Tzkjfx Aa Ieku Front Supports

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00715, load capacity: 6 kg, arm reach: 810 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB IRB140T-6/0.8 manufactured in 2016.10. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB140T-6/0.8 Model Number: IRB140 Year of Manufacture Robot: 2016.10 Warranty term (months): 12   Payload (kg): 6 Reach (mm): 810 Repeatability (mm): ± 0.03 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 98   Controller: IRC5 Year of Manufacture Cabinet: 2016.10 Dsdpjz Nfvxsfx Aa Ieku RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: used, mileage: 655,805 km, power: 291 kW (395.65 HP), first registration: 09/2014, fuel type: diesel, tire size: 355/50 R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: other, gearing type: automatic, emission class: euro6, total length: 5,920 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2014, Equipment: ABS, air conditioning, electric window regulation, parking heater, power mirror, Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Front axle: Tyre size: 355/50 R22.5; Max. axle load: 8000 kg Rear axle: Tyre size: 295/80; Max. axle load: 11500 kg Weights Empty weight: 7.267 kg Carrying capacity: 12.233 kg GVW: 19.500 kg Max. towing weight: 50.000 kg Interior Number of seats: 2 Maintenance APK (MOT): tested until 06/2027 Identification Dodpfx Aaez Nlzhs Ioku Registration number: 93-BFD-3

Condition: refurbished (used), Year of construction: 2022, operating hours: 1,518 h, functionality: fully functional, power: 260 kW (353.50 HP), year of last overhaul: 2026, Basic Inventhor 6 package: Load-Sensing System Fuel tank, 500 liters Longitudinal belt: belt length 2,900 mm, belt width 800 mm centrally arranged lubrication strips 24V electrical control system - additional electric pump for operating the following functions when the engine is stopped: raise/lower/tilt rear belt, open/close comb flap, open/close comb, raise/lower folding chute complete radio remote control large side GRP maintenance doors easy-to-maintain engine compartment LED lighting package: engine compartment and rear Dkedpfsxx N Dgjx Aa Iou hydraulically reversible fan wheel three-sided loading protection folding chute fire extinguisher maintenance ladder toolbox acoustic start-up warning Doppstadt telematics system paint: RAL2011 traffic orange Additional equipment: Drive train 260 kW - EV 2-axle semi-trailer chassis Shredding system Size L - 20 teeth Additional hydraulic connection 35 - 80 l/min Hydraulic drive Rear belt 7 m Over-belt magnet, neodymium Frame for over-belt magnet, 7 m Delivery date will be agreed upon.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, TECHNICAL DETAILS Inserting speed: 22,000 mail pieces/h Envelope stacking capacity: 3,000 pieces (24#) Insert stacking capacity: 2,000 pieces (single, folded 20#) Feeder capacity: approx. 45.56 cm Tolerance: ± 0.08 cm Format range: 9.84 × 16.19 cm to 17.62 × 25.08 cm MACHINE DETAILS Electrical data Djdpfeyzpgiox Aa Ioku Power supply: 3 × 400 V, 3PN+E, 50–60 Hz Protection: 16 A Dimensions: approx. 11.89 x 0.92 m Counter reading: 145,000,000 The indicated dimensions and format sizes were taken from the data sheet and converted from US measurements (in./ft.) to cm. Note: The machine is currently under a full maintenance contract.

Condition: excellent (used), Hilger & Kern P80 Pump Base version P80 Container size 80 l Gear ratio (drive) 56:1 Delivery rate (at 20 double strokes) l/min 0.61 Material viscosity (ball valve pump/scoop piston pump) 2.5 million Working pressure (max.) bar 20-250 (315) Dsdsg Ib Npopfx Aa Ieku Air consumption at 20 double strokes l/min 220 Dimensions base plate (A x B) mm 610 x 500 Height, retracted mm 1400 Height, extended mm 2200 Weight without container kg 65 / 72 Maximum container height mm 750 Maximum container size 80 Maximum outer container diameter mm 440 The scope of delivery includes a single pump Complete factory closure, large selection of storage platforms, pallet racks, shelving systems, and paternoster lifts. High-quality industrial machines, lathes, grinding machines, and hand tools. You can find more new and used items in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 2000, Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts. Djdpfox Tpytsx Aa Isku

Condition: used, Year of construction: 2010, Technical details: turning diameter: 1000 / 700 mm turning length: 3000 mm face slide travel: 600 mm turning diameter over slide: 700 mm turning speeds: 1-1.800 1/min transmission ratio: 2 spindle: 46 (60%) kW spindle bore: 132 mm quill stroke: 280 mm workpiece weight max.: 2.560 kg total power requirement: 38 kW weight of the machine ca.: 6 t Dedor U Skhopfx Aa Ijku dimensions of the machine ca.: 5 x 2,6 x 1,9 m teach in lathe, PARAT tooling system, SCHUNK ROTA NC 500-160 hydr. power chuck, tailstock, chipconveyor *

Condition: used, mileage: 231,812 km, power: 120 kW (163.15 HP), first registration: 03/2016, fuel type: diesel, overall weight: 3,500 kg, color: orange, gearing type: mechanical, emission class: euro5, number of seats: 6, loading space length: 2,343 mm, loading space width: 1,834 mm, loading space height: 1,701 mm, Year of construction: 2016, Equipment: ABS, central locking, electronic stability program (ESP), parking heater, soot filter, Buy online. Finance digitally. Get it delivered nationwide. Chat with us now via WhatsApp: Quick & easy contact with our sales consultant. Internal ID number: 3639 Vehicle highlights: * Mixed-use vehicle – 6 seats + cargo space * Long wheelbase * Cruise control * Rear-view camera * Trailer hitch * Touchscreen radio (Android) * Sliding door on the right with window * Solid partition with wood paneling * Powerful 2.1-liter CDI with 163 hp * Digital service booklet * Accident-free * New TÜV (technical inspection) & service Your advantages with us: Digital consultation by phone or WhatsApp * Financing options, even without a down payment * We accept your vehicle in part exchange – whether old or new Optionally available: 12–60 months used car warranty (valid throughout the EU) * New service * New TÜV & emissions test * Nationwide delivery Cargo space size (approx.): Length 2,343 mm x Width 1,834 mm x Height 1,701 mm Equipment overview: Comfort & Multimedia: Cruise control * Touchscreen radio (Android) * Electric windows * Central locking with remote control * Electrically adjustable and heated exterior mirrors * Auxiliary heater (air) electric Safety: Rear-view camera * ABS, ASR & ESP * Driver airbag * Immobilizer * Power steering Interior & Cargo Space: Mixed-use vehicle with 2nd row of seats – a total of 6 seats * Seat upholstery: fabric * Sliding door on the right with window Dkjdpfxez Nu Tys Aa Iou * Solid partition with wood paneling * Wood flooring in the cargo area * Rear doors Technology: 2.1 L CDI diesel – 120 kW (163 hp) * Manual transmission, rear-wheel drive * Long wheelbase * Trailer hitch * Particulate filter * Permissible total weight: 3.5 t Do you want to lease or finance? We offer attractive deals – even without a down payment! Feel free to contact us. Contact: Phone: WhatsApp: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos and prior sale are reserved. The photos are AI-edited and serve only as an example to illustrate the size and equipment of the vehicle. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances.

Condition: ready for operation (used), Round pile feeder 1st unit 6 plates 2nd unit 6 plates Dkodpfx Aastcx Iqs Iou 3rd unit 4 plates Heidelberg TSH twin stacker delivery

Condition: new, Year of construction: 2022, grinding diameter:260 mm grinding length:1000 mm centre height:130 mm dimensions of grinding wheel:400x60x127 mm grinding wheel speeds:1700,1900,2200 U/min grinding head swivelling:+/- 30 Grad table swivelling +/-:9 Grad Tailstock spindle taper:4 MK grinding wheel motor:4 kW hydraulic motor:1,5 kW work piece motor:0,37 kW net weight:2400 kg gross weight:2950 kg PLC control:Siemens S7 tailstock sleeve movement:pneumatic, via foot padel operating panel:New Rittal operating panel with touchscreen screen from Siemens centers sleeves:2 Dkedpfjg N Nh Dex Aa Iju grinding wheel flange:2 unused cylindrical grinding machine, manufactured by ABA type URS 400 Year, 2009 Further technical data, and standard and optional equipment, as defined in Appendix. Payment: 100% before loading of the machine Warranty: no

Condition: good (used), functionality: fully functional, power: 55.4 kW (75.32 HP), operation weight: 4,355 kg, maximum load weight: 2,760 kg, Year of construction: 2021, operating hours: 816 h, machine/vehicle number: WNCD2401EPAL00531, DUAL VIEW Cab Rear-view camera 360-degree LED warning light Tires: Mitas 405/70-20 MPT-01 Tilt-and-dump body Dodpfoz N Aazjx Aa Isku Max. payload: 2,760 kg Operating weight: 4,355 kg

Condition: used, mileage: 231,482 km, power: 175 kW (237.93 HP), first registration: 04/2013, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,800 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, total length: 10,350 mm, total width: 2,590 mm, loading space length: 8,040 mm, loading space width: 2,440 mm, loading space height: 2,530 mm, Year of construction: 2013, Tail lift: BAR CARGOLIFT, tail lift WDB9630031L743748 Cool unit brand: Carrier = More information = Number of cylinders: 6 Engine capacity: 7.698 cc Empty weight: 10.720 kg Carrying capacity: 8.280 kg GVW: 19.000 kg Cooling engine: diesel and electric Price: On request Registration number: 91-BBS-1 Dkedpfx Aasz Ihute Ieu = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, mileage: 450,175 km, power: 182 kW (247.45 HP), first registration: 12/2017, fuel type: diesel, number of seats: 44, gearing type: automatic, next inspection (TÜV): 07/2027, emission class: euro6, color: white, Year of construction: 2017, Equipment: ABS, air conditioning, 7 UNITS AVAILABLE. Dkjdpfx Aaoz I H Ire Iju