Used Küenle K10R 132 for sale (1,115)

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Kdedpfxjzu Aibo Akpsu Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor, crane motor -Manufacturer: ABM Greiffenberger -Engine: Type 3G225F/132 / D 80 b-4 -Power: 0.75 kW -Speed: 4 rpm -Design: B5 -Shaft: Ø 65 x 105 mm -Protection class: IP 54/55 Kedpsxamghefx Akpsdu -Dimensions: 705/305/H400 mm -Weight: 106 kg

Condition: excellent (used), Year of construction: 2011, operating hours: 53,132 h, functionality: fully functional, power: 132 kW (179.47 HP), volume flow: 1,596 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Screw compressor GA132VSD Atlas Copco Integrated frequency converter 132 kW Kodpjx Rwz Tsfx Akpsdu 8.5 bar 26.06 m³/min

Condition: ready for operation (used), Indramat 2AD132B-B35RB1-BS03-A2N1 / 238130 motor, serial number: 2AD132-5994, used, in good condition, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Kdjdpfx Aoz Tbccokpeu

Condition: used, Year of construction: 2011, Technical details: temperature min.: 1 ° temperature max.: 199 ° electrics - voltage/frequency: 380 / 50 V/Hz heating capacity: 1,8 (1800 Watt) kW protection class: IP 54 total power requirement: 16,2 kW weight of the machine ca.: 0,93 t dimensions L x W x H: 2,85 x 2,0 x 1,4 m Pre-polymerization tunnel - Heat treatment tunnel Kdjdpeu Nw E Usfx Akpsu Application: drying for washing and painting lines - pass through Sold as is and described! other features: -recommended temperature according to manufacturer max. 80°C; safety setting 90°C; heating 230V -with chain conveyor/feed line made of Teflon -chain width 200mm -max. workpiece width 150mm passage W: 150 x H: 110mm, running height 600mm; operation motor SEW Eurodrive (gear motor) power 0,18kW loading W x H: 500 x 800mm unloading door W x H: 600 x 1200mm access door W x H: 800 x 980mm with safety locking system room height 1400mm *

Condition: used, mileage: 430,000 km, power: 175 kW (237.93 HP), first registration: 04/2014, fuel type: diesel, overall weight: 13,500 kg, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, Atego 1324 Registration: Mileage Air conditioning Euro 6 6-cylinder engine Tires: 70-80% tread Suspension: Leaf/air Payload: 5500 kg Body: Lamberet Length: 7.2 m Box with doors Refrigeration unit: Carrier Supra 750 Refrigeration capacity: down to -25°C Refrigeration unit: Only 3300 hours Kedpozvk S Hsfx Akpsdu ---- Visit our website: German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/.../... Roman We will gladly take care of your financing or leasing needs. EU sales: net price upon presentation of company documents and tax/VAT number. VAT deposit: €2000 Our services for you: - Customs license plates - Export documents and EUR1 certificate - Worldwide transport - Accommodation - Transfer from Munich Airport or Passau train station

Condition: good (used), flat gear motor, geared motor, electric motor, electric geared motor, bevel geared motor -Manufacturer: Nord, gear motor -Type: 1SU63A-80 L/4 i = 18.50 -Speed: 76 rpm -Engine: Nord Type SK 132 M/40 -Power: 9.2 kW / 1450 rpm -Voltage: 400/690 V -Hollow shaft: Ø 50 x 195 mm Kodet E D Hvopfx Akpjdu -Protection class: IP55 -Dimensions: 620/320/H465 mm -Weight: 125 kg

Condition: reconditioned (used), Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - machine has been completely overhauled: - new Glue Jet 301 glue system (top part 1 mm) - all units inspected - all cutters sharpened - all knives replaced - feed speed: 10 - 18 m/min - workpiece length: min. 160 mm - workpiece width: min. 60 mm - workpiece thickness: 8 - 60 mm - edge thickness: 0.4 - 8 mm - electrics for infinitely variable feed: 400 V / 50 Hz, 2.2 kW - motorised pressure beam adjustment - automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy-saving mode Kjdjzlbpzspfx Akpsdu - infeed fence 1350 mm, motor-adjustable - jointing/trimming unit 1802: - 2 x 2.0 kW, 200 Hz, 12000 rpm with 2 milling units for jointing the panel edge - cutter, diamond Ø 70 x 64 x 30 mm, Z2, counter-clockwise for jointing unit - cutter, diamond Ø 70 x 64 x 30 mm, Z2, clockwise for jointing unit - edge feed 1901 fully automatic - adhesive application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - storage hopper for granulate - pressure unit 1913 MOT - end-trimming unit 1918 (60 mm) pneumatic - multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm counter-clockwise - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm clockwise - profile milling unit 1833 MOT4: - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, counter-clockwise with CM technology - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, clockwise with CM technology - scraper unit 1929 MOT2: - carbide indexable inserts for scraper holder R = 2.5 mm (2 pcs. required) - flat scraper 1964 - buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: at short notice Location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2015, operating hours: 30,636 h, functionality: fully functional, power: 132 kW (179.47 HP), volume flow: 1,440 m³/h, pressure (max.): 8.3 bar, type of cooling: air, Equipment: refrigerant dryer, Screw compressor, Atlas Copco GA132FF Integrated dryer 132 kW 8.3 bar Kjdpfx Aksz Dvckepedu 24 m3/min Year of manufacture: 2015 Operating hours: 30,636 h

Condition: repair required (used), Year of construction: 2013, operating hours: 3,990 h, functionality: limited functionality, machine/vehicle number: 81, mileage: 93,000 km, power: 176.52 kW (240.00 HP), first registration: 05/2013, overall weight: 13,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, fuel: diesel, emission class: euro5, The sweeper had fire damage to the bodywork separate engine (cylinder head). The cylinder head has been replaced, the engine runs. Hydraulic hoses and electrical cables still need to be replaced. Ksdjvgbpzepfx Akpjdu

Condition: new, mileage: 100 km, power: 355 kW (482.67 HP), fuel type: diesel, overall weight: 26,000 kg, gearing type: automatic, Equipment: soot filter, * 1 Lane Change Warning System * 1 -----Color/Paint----- 1 Chassis color: Anthracite Grey * 1 Cab color: E1980WHTE CRYSTAL WHITE * 1 Lower cab panel: Crystal White * 1 Mirror housing: Crystal White * 1 -----Tires/Wheels----- 1 Goodyear * 1 F1, 315/70R22.5GO EQMSU 158/150 L Steering ABA 3P * 1 R1, 315/70R22.5GO EQMDU 154/150 L Traction ABB 3P * 1 R2, 315/70R22.5GO EQMSU 158/150 L Steering ABA 3P * 1 RR, not applicable * 1 -----Equipment/Optional Equipment----- 1 Mechanical cab suspension Kodpoy Tgq Ajfx Akpjdu * 1 Adaptive Cruise Control with FCW and AEBS-3 * 1 Emission class: Euro 6 * 1 OBD-E engine H6, fuel B7 * 1 Automated transmission, TraXon, 12 gears * 1 Standard component layout * 1 BDF pack multi-body system 1120-1320 mm, prepared * 1 Sleeper High Cab * 1 Chassis design front: Aero base plate * 1 Exterior sun visor * 1 LED headlights, cornering and fog lights * 1 Headlights with height adjustment * 1 LED skylights * 1 Two LED headlights for cab rear wall * 1 Main mirror * 1 Convex main mirror * 1 Central locking, 3 keys, 2 remote controls * 1 Adjustable roof spoiler short, Sleeper High Cab * 1 Steering wheel, leather * 1 Dashboard design: Plateau * 1 Door panel: Loosely woven fabric * 1 Driver's seat: Luxury Air * 1 Armrests on both sides of the driver's seat * 1 Passenger seat: Cinema & table, fabric cover * 1 Armrests on both sides of the passenger seat * 1 Refrigerator and drawer * 1 Upper sleeper bunk * 1 Safety net on both sleeper bunks * 1 Curtains with dividing curtain * 1 LED interior lighting: Luxury * 1 Automatic cab climate control * 1 Roller blind passenger side * 1 Roof hatch with electric operation * 1 Accessory power supply: Standard + 2x 40 A * 1 ECAS remote control with extended functions * 1 FMS connector, extended and prepared * 1 PACCAR Connect with navigation and tablet software * 1 Digital tachograph, VDO 1C, version G2V2 * 1 Speed limiter setting 90 km/h * 1 DAF Infotainment Exclusive prepared, Luxury speakers * 1 Antennas: Radio, 2x mobile phone, GNSS Extra: CB * 1 Wireless charger * 1 Emergency hammer * 1 Rear warning system * 1 Front: 8.00 t, air suspension, 161 N * 1 Front air suspension: medium * 1 MX-13 engine, 355kW/483HP, cab emblem: 480 * 1 ECO mode * 1 12-speed TraXon transmission 12TX2210 DD, 16.69-1.00 * 1 Traction aid 15.0 t * 1 Rear axle ratio 2.47 * 1 Mechanical differential lock * 1 ZF Intarder * 1 Parking brake assistant * 1 Compressor 2 cylinders without clutch * 1 Wheelbase 4.80 m/rear overhang 1.62 m * 1 Longitudinal member 260/7.0 mm, continuous internal reinforcement * 1 EAS unit right, vertical battery box + 75-liter air tank left * 1 Air pressure tank made of aluminum * 1 960-liter aluminum fuel tank: 620 liters left + 340 liters right, height 620 mm * 1 Fuel tanks left and right * 1 Rear fender * 1 Two wheel chocks * 1 Four LED work lights * 1 Rear lights with LEDs * 1 Cross member D137 + Ringfeder coupling D137 * 1 Fixed wired body signals and warnings * 1 Preparation for aftermarket switches * 1 Chassis preparation for BDF multi-system * 1 Preparation for interchangeable systems * 1 Fixed control gear auxiliary drive, no 1st gear auxiliary drive * 1 Generator 130 A, batteries 2 x 210 Ah AGM * 1 Battery energy monitoring * 1 Additional cab insulation * 1 Maximum ambient temperature 45 degrees * 1 Warranty Plus vehicle - 3 years - no mileage limit * 1 Extended maintenance interval * 1 Jack * 1 Standard

Condition: used, mileage: 135,000 km, power: 175 kW (237.93 HP), first registration: 11/2008, fuel type: diesel, overall weight: 13,500 kg, next inspection (TÜV): 04/2027, emission class: euro5, loading space length: 7,300 mm, loading space width: 2,450 mm, loading space height: 2,300 mm, Equipment: ABS, parking heater, tail-lift, Atego 1324 Registration date: 11/2008 !!!! ONLY 135,000 km !!! Euro 5 MOT valid until 04/27 Auxiliary heater Automatic transmission Suspension: Air-on-air Payload 5200 kg Bär tail lift Loading dimensions: 7.3 m height, 2.3 m width, 2.45 m Unit: Thermoking TS 600 !!!! UNIT HAS ONLY 400 DIESEL RUNNING HOURS !!!!! Visit our website: German/English/Serbian/Croatian/Bosnian/Bulgarian… Goran German/English/…? … Roman We will gladly take care of your financing or leasing. EU sale: net price upon presentation of company documents and VAT number. Kdjdpfx Aoz Am Tyskpeu VAT deposit: €2000 Our service for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer from Munich Airport or Passau train station

Condition: used, machine/vehicle number: 008665, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR, Cartridges Premilling Unit: yes Kdedpfx Akezvwn Uspou Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Condition: Good (the machine has undergone extensive maintenance every year, most recently in March 2026!) Kdedpfx Ajzpzy Iekpou Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - MOT SPS adjustable infeed fence - Automatic chain lubrication: Intelligent automatic transport chain lubrication - Edge Control 19 control system - EL GRM variable, 400V 50Hz, 2.2kW V2 SPRINT 1329 PERFORMANCE 400V 50Hz - Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format - ECO MODE energy-saving mode: An automatic standby circuit - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Edge feed 1901 SYNCHRO: automatic transport of coil and strip material - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 SPS motorized SPRINT - GM501 spray device after the printing unit with lubricant (recommended for high-gloss edges) - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically tiltable 0/10° - Milling unit FR701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Air Stream System multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - Form milling unit FF701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, left-hand rotation with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, right-hand rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the tracing rollers - HW reversible knives for scraper holder, R = 2.0 mm (2 pcs. required) - Flat scraper FK701 with pre- and post-sensing for removing adhesive residue - TR501 spray unit for infeed and outfeed (separating and cleaning agent) - Includes nesting shoes below with their own spray unit Location: Hesse Availability: Approx. July 2026

Condition: excellent (used), Three-phase motor, electric motor -Engine data: -Power output: 132 kW -Speed: 2970 rpm -Protection class: IP 23 -Design: B35 -Shaft: Ø 65 x 140 mm Kedpfx Akeb A Slbjpedu -Flange: Ø 660 mm -Recess: Ø 550 mm -Bolt circle: Ø 600 mm -see photo nameplate for further details -Weight: 660 kg

Condition: used, Model North - South, clock wise rotation Belt width 600 mm Tiers 32 pcs. Product gap max. ± 89 mm Belt length ± 425 m Infeed height 800 mm Outfeed height 5.800 mm Cooling Freon Power 3 x 400V, 50Hz 45 kW total connected power Required cooling capacity: 150 kW Kdodpfx Asz Rl D Sjkpju Dimensions (l x w x h) : ± 5.660 x 8.080 x 6.530 mm motor compressors and panels not included

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear door Equipment: - Multiplex walls - 6x tie-down points - Single-leaf rear door Net: €2,899.16 / Gross: €3,450.00 Article number: HKP113251315.01 Technical data: • Brand: Humbaur • Model: HK 132513-15P • Vehicle type: Box trailer • Vehicle condition: New • First registration: Without first registration • TÜV/HU: 2 years from first registration • Interior dimensions (LxWxH): 251 x 132 x 152 cm • Exterior dimensions (LxWxH): 378 x 181 x 211 cm • Loading height of the floor: 54 cm • Permissible total weight: 1,300 kg • Tare weight: 410 kg • Payload: 890 kg • Chassis: Low loader (wheels next to the body) • Tires: 185/65R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Side walls and roof made of multilayer wood, 15 mm thick, with UV-resistant plastic coating • Stable V-shaped drawbar, hot-dip galvanized • Longitudinal beams continuous • Single-leaf door at the rear • Twist-lock and hinges galvanized • 1x maneuvering handle at the front • Tie-down points in the frame profile, tensile force 400 kg per tie-down point, Dekra tested • Reverse automatic • ALKO coupling and parking brake • Plastic fenders • Interior light installed • 13-pin connector • Rear lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel with clamp in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are subject to copyright!! Kjdpfszy Axmsx Akpsdu Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp Equipment: - 6 lashing eyes - Tailgate - Multiplex walls Net price: €3,108.40 / Gross price: €3,699.00 Article number: HKP113251315.02 Kedpfx Aszy Dxbskpjdu Technical data: • Brand: Humbaur • Model: HK 132513-15P • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 251 x 132 x 152 cm • External dimensions (LxWxH): 378 x 181 x 211 cm • Loading height of the floor: 54 cm • Permissible total weight: 1,300 kg • Tare weight: 425 kg • Payload: 875 kg • Chassis: Low loader (wheels next to the body) • Tires: 185/65R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Side walls and roof made of multilayer wood, 15 mm thick, with UV-resistant plastic coating • Sturdy V-shaped drawbar, hot-dip galvanized • Longitudinal members continuous • Tailgate with gas spring and non-slip surface (maximum load 300 kg) • Twist lock and hinges galvanized • 1 maneuvering handle at the front • Lashing eyes in the frame profile, tensile force 400 kg per lashing eye, Dekra tested • Automatic reversing system • ALKO overrunning device and parking brake • Plastic mudguards • Interior light installed • 13-pin connector • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel with clamping bracket in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: excellent (used), Year of construction: 2020, MACHINING CENTER GANNOMAT "PROTEC 0571" working width 1300 mm Drilling, grooving, milling Base machine complete in standard version according to price list 01/19/D: For detailed technical data, please refer to the datasheet for PROTEC Type 0571 - Machining unit with: PowerBlock with 21 spindles and 1 slotting saw (BK 1341) Ksdpfx Aew Sguwokpedu - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y - Milling unit Profit F3 HSK63F with 3-position magazine for automatic tool change, 5.5 kW motor (S1), 1,000–20,000 rpm with frequency converter, clockwise and counterclockwise rotation, tool holder HSK63F with collet 462E, cutter length up to 130 mm. - INCLUDES OPTION: Additional safety device with lamella curtain for processing Lamello P-System. Required for horizontal milling for Lamello P-System with groove cutter Ø 100.4 x 7 x 30 mm. - Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1300 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 263 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg. - Air connection: 7 bar Machine No. 435.046 Electrical connection: (400V, 3Ph, 50Hz, (12kVA, 17.5A)) - Pressure device from above for working width 1300 mm - 765 mm roller table (Y-axis), foldable, for machine front, W 500 mm - 765 mm roller table (Y-axis), foldable, for machine rear, W 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Extraction distributor Ø 160 mm / Ø 80-80-80 mm, spacing 196 mm - Documentation in German: Operating manual: GERMAN Programming manual: GERMAN Operator software: GERMAN Operating system: ENGLISH Keyboard: GERMAN Location: ex stock 54634 Bitburg - immediately available -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear door Equipment: - 6 tie-down points - Multiplex walls - Single-leaf rear door Net price: €2,512.61 / Gross price: €2,990.00 Article number: HKP175251315.01 Technical data: • Brand: Humbaur • Model: HK 752513-15P • Vehicle type: Box trailer • Vehicle condition: New • First registration: without first registration • TÜV/MOT: 3 years from first registration • Internal dimensions (LxWxH): 251 x 132 x 152 cm • External dimensions (LxWxH): 375 x 176 x 208 cm • Loading height of the floor: 50 cm • Permissible total weight: 750 kg • Unladen weight: 385 kg • Payload: 365 kg • Chassis: Low-loader (wheels beside the body) • Tires: 145/80R13 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Side walls and roof made of multi-layer wood, 15 mm thick, with UV-resistant plastic coating • Sturdy V-drawbar, hot-dip galvanized • Longitudinal beams continuous • Single-leaf door at the rear • Twist-lock closure and hinges galvanized • 1 maneuvering handle at the front • Tie-down points in the frame profile, tensile force 400 kg per tie-down point, Dekra tested • ALKO coupling head • 100 km/h manufacturer approval • Plastic fenders • Interior light installed • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel with clamping bracket in the center Kedpfx Ajzy Aqpskpjdu _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT. - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale excepted -

Condition: ready for operation (used), Year of construction: 1998, operating hours: 28,973 h, functionality: fully functional, overall weight: 2,750 kg, total length: 2,800 mm, total width: 1,150 mm, total height: 1,770 mm, power: 132 kW (179.47 HP), volume flow: 1,630 m³/h, type of cooling: water, input voltage: 400 V, input frequency: 50 Hz, operating temperature: 201 °C, pressure: 2.75 bar, rotational speed (max.): 12,874 rpm, type of input current: three-phase, Equipment: compressor, documentation/manual, type plate available, Only 2 units available! Aerzen VM 30 screw compressor Used to pneumatically unload railway cars. Manufacturer: Aerzen Type: VM 30 Volumetric flow rate: 27.17 m³/min (1630.2 m³/h) Pressure increase: 2.75 bar Compressor speed: 12874 rpm Shaft power: 105 kW Motor power: 132 kW Final temperature: 201 °C Cooling of the compressed air is done with water via a shell and tube heat exchanger. Year of manufacture: 1998 Kjdpfx Asrkpp Hjkpsdu Dimensions: Length: 2800 mm Width: 1150 mm Height: 1770 mm Weight: approximately 2750 kg Operating hours: Compressor 1: 28109 hours Compressor 4: 28973 hours Regular service was performed by a specialized service company! Not operated since 2019. Have been stored in a dry and heated location since then.

Condition: good (used), Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: Nord, gear motor -Type: SK 4282AZ-132 S/4 i = 9.23 -Speed: 158 rpm -Engine: Nord Type SK 132 S/4 -Power: 5.5 kW / 1450 rpm Kdedst E D Hpjpfx Akpju -Hollow shaft: Ø 50 x 195 mm -Protection class: IP55 -Dimensions: 630/320/H450mm -Weight: 104 kg

Condition: good (used), Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection, electronic modules, PLC controller, digital input, digital output, electronic block, decentralized peripheral device -Manufacturer: Siemens, SIMATIC S7, Distributed I/O device from vertical lathe Scherer VDZ 80 DS -Type: ET 200L 6ES7 132-1BL00-0XB0 -Additional terminal: 6ES7 193-1FL30-0XA0 Kdedpfsxphu Ssx Akpsu -Number: 4x module available -Price: per piece -Dimensions each: 190/135/H75 mm -Weight: 0.8 kg/piece

Condition: excellent (used), INOTEC I225CD INDUSTRIAL EMULSIFIER-GRINDER – STAINLESS STEEL Kdjdpfez R Tb Tsx Akpsu INOTEC I225CD industrial emulsifier-grinder, designed for fine grinding, homogenization, and emulsification processes of food products in high-capacity industrial lines. The equipment incorporates an upper feeding hopper and a high-performance cutting system that reduces particle size and produces homogeneous mixtures with a fine and uniform texture. INOTEC technology is especially suitable for the production of wet pet food, meat products, emulsions, and other food preparations that require intensive and continuous processing. MAIN FEATURES - Manufacturer: INOTEC - Model: I225CD - Type: Industrial emulsifier-grinder - Application: Fine grinding and emulsification - Continuous industrial operation - Upper product feeding hopper - Mechanical grinding and cutting system - Particle size reduction - Homogenization of mixtures - Production of food emulsions - Continuous feeding to the cutting chamber - Rotor and stator system according to configuration - Driven by an electric motor - Robust construction process chamber - Discharge of the processed product - Construction mainly in stainless steel - Industrial structure with access platform - Accessibility for cleaning and maintenance - Integrable into complete food processing lines OPERATING PROCESS The product is introduced into the upper hopper of the INOTEC I225CD, from where it is conveyed to the grinding chamber. Inside, the cutting system subjects the raw material to an intensive mechanical action that reduces particle size, disperses the components, and homogenizes the mixture. The degree of grinding and the final texture depend on the configuration of the cutting assembly, the characteristics of the product, and the operating conditions. Once processed, the product is discharged to the next production stages. It can be integrated with mixers, feed tanks, industrial pumps, cooking systems, heat exchangers, buffer tanks, and filling lines. APPLICATIONS Especially suitable for manufacturers of wet pet food, meat industries, and plants for the production of emulsified food products. Its applications include: - Wet food for dogs and cats - Pâtés and emulsions for pet food - Meat preparations - Fine meat pastes - Food emulsions - Mixtures of proteins and fats - Ground and homogenized products - Other formulations compatible with industrial emulsification The INOTEC I225CD represents a high-capacity solution for fine grinding and emulsification processes, allowing the production of homogeneous products that are prepared for subsequent cooking, heat treatment, or packaging operations. The production capacity, power, and configuration of the cutting system will depend on the technical characteristics of the installed unit. Machine available for inspection. Additional technical information, production capacity, formats, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, CNC machining center Hedelius Forte 65 Single 1320 Control system: Heidenhain TNC 640 Year of manufacture: 2019 Availability: in transit Internal machine number: 74 Travel distances: Kjdpfszzmirex Akpjdu X-axis 1,320 mm Y-axis 650 mm Z-axis 600 mm Total clamping area: 1,500 x 650 mm Table load: approx. 1,200 kg Tool holder: HSK 63 Tool magazine: 65 positions Spindle speed: 18,000 rpm Drive power: 35 kW Equipment: - Inclined bed coolant system, 900 l - Internal cooling lubricant system, 25 bar - Chip conveyor - 1x flushing gun - Electronic handwheel