Used Kögel Evkt 74 for sale (1,550)

Condition: used, axle configuration: 2 axles, first registration: 01/2020, * Schwarzmüller K-Series tipper semi-trailer * First registration: 2020 * Lift axle Ljdpjzu Ed Ijfx Afkjaf * SAF axles * Air suspension * Disc brakes * In very good condition, used for only two years!

Condition: used, maximum load weight: 14,200 kg, overall weight: 21,000 kg, axle configuration: 1 axle, first registration: 08/2003, loading space length: 1,175 mm, loading space width: 2,500 mm, loading space height: 2,320 mm, * Kögel SVKA10 single-axle box semi-trailer with a tail lift Lasdpozu Edzofx Afkof * First registration: 2003 * Steerable axle * Own batteries * Insulated * Pneumatic roll-up door * Internal dimensions: 11.75 x 2.50 x 2.32 m * Tare weight: 6,800 kg * Gross vehicle weight: 21,000 kg * Payload: 14,200 kg

Condition: used, maximum load weight: 35,560 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 07/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment list available upon request. Chassis: Lasdpfozqii Hsx Afkjf Ladder frame made of lightweight steel, with continuous crossmembers. Coupling plate, 8 mm thick, with a 2-point kingpin according to DIN 74080 / ISO 337. Suspension: Axle lift mechanism on axle 1, 18330.700, manufacturer optional (Kögel). Three-axle unit, with disc brakes, approximately 430 mm in diameter, approximately 120 mm offset. Air suspension with approximately 180 mm of travel. Vehicle tires: 6x 385/65 R 22.5, 160J (European brand, manufacturer optional - Kögel). Chassis components: Kingpin supports (manufacturer optional - Kögel), mechanical with leveling foot, approximately 24 tons lifting capacity. One-sided operation on the right-hand side when driving. Splash protection system (spray mist suppression) according to Regulation (EU) No. 109/2011, consisting of 1 pair of quarter-fender mudguards in front of the axles, and 1 pair of quarter-fender mudguards with mud flaps behind the axles. 2 wheel chocks with holder. Pallet box for 24 Euro pallets, completely enclosed, protected against spray water, and also serves as a side protection device. Ground clearance (front) 220 mm. Plastic toolbox, waterproof, dimensions (internal) approximately 545 x 400 x 400 mm. Installed on the left-hand side at the rear. Retractable access ladder at the rear on the right-hand side. High, rigid rear underrun protection made of steel according to ECE-R58. Height of the underrun protection profile min. 120 mm, designed for increased test loads. 1 pair of retractable warning panels for over-width loads, retro-reflective red/white, with LED lighting, spiral cable and plug connection. Arrangement in the front and rear vehicle area. Braking/air suspension system: EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connecting cables), parking brake as spring-loaded brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 plug connection. EBS system (manufacturer optional - Kögel). Air suspension system including 1 lifting and lowering valve, mounted on the left-hand side behind the axle unit when driving. Driving height is adjusted automatically. 2 fail-safe coupling heads at the front, ISO 1728. Air tank for brake system and air supply made of steel (EN 286-2). Floor: Plate floor, approximately 30 mm thick. Floor sealed at the rear. Superstructure: WITHOUT quick-release device for front side tarpaulin, with tensioning rods. Quick-release device at the rear for side tarpaulin with tensioning rods and ratchet. Meets superstructure strength according to EN 12642 XL (VDI 2700). Tested for a payload of approximately 27,000 kg. Front wall: Front wall in superstructure height with aluminum corner posts, riveted with aluminum hollow profiles, screwed/riveted to the frame, 1 pair of lashing eyes according to EN 12640. Inside of front wall reinforced with 12 mm plywood with screen-printed surface, approximately 1,250 mm high. Rear wall: Double-wing rear portal door made of aluminum, approximately 2,630 mm i.o.L. 4 integrated twist lock closures (2 pieces on the left, 2 pieces on the right), manufacturer optional - Kögel. Bolted corner posts at the rear made of aluminum at portal height. Corner posts on both sides, approximately 500

Condition: used, maximum load weight: 32,480 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2023, next inspection (TÜV): 08/2026, Equipment: ABS, Excerpt of Equipment Chassis: 10110.191 Regular ladder frame in lightweight steel construction with continuous cross members. 10115.010 With forward extension of the chassis frame. 10140.010 Cover plate between the outer frame and the longitudinal beam as tire protection for the rear wheels of the tractor unit. 10300.108 Coupling plate approximately 8 mm thick, with a 2-jaw kingpin according to DIN 74080 / ISO 337. Axles: I 17160.015 Axle lift mechanism on axle 1. I 18330.365 BPW tri-axle unit ECO Air with disc brakes Ø approximately 370 mm, track width 120, air suspension approximately 260 mm stroke. Vehicle Tires: 20540.540 Tires 6x 445/45 R 19.5, 160J (manufacturer at customer's choice, Kögel). Chassis Components: 20110.010 Kingpin supports (manufacturer at customer's choice, Kögel), mechanically operated with leveling foot, approximately 24 t lifting capacity. One-sided operation on the right side in the direction of travel. 21070.182 Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for tri-axle unit with 19.5 tires, consisting of 1 pair of quarter-circle fenders in front of the axles, 2 pairs of straight fenders between the axles, and 1 pair of quarter-circle fenders with splash flaps behind the axles. 21300.001 2 chock blocks with holder. 22070.015 Side protection device according to ECE-R73. I 22075.020 Tool-free folding side protection device on the right and left sides in the direction of travel. I 25105.021 Spare wheel mounting with winch incl. 1 wheel fastening kit, mounted behind the axle unit. I 25475.020 Mounting for 16 square tube inserts, approximately 80 x 80 x 1,990 mm. Installation on the side of the longitudinal beam on the left and right sides in the direction of travel. I 25620.011 Tool box made of plastic, waterproof, dimensions (internal) approximately 545 x 400 x 400 mm. Installation on the rear left side in the direction of travel. 26110.005 Omission of access ladder. 27510.015 Low, rigid underrun protection at the rear made of steel according to ECE-R58. 27511.010 Height of the underrun protection profile min. 120 mm, designed for increased test forces. I 71800.020 1 pair of retractable warning signs for overwidth loads, retroreflective red/white, with LED lighting, spiral cable and plug connection. Arrangement in the front and rear area of the vehicle. Braking / Air Suspension System: 32110.057 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS socket connection ISO 7638, (without connection lines), parking brake as spring-loaded brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 socket connection. I 32125.015 WABCO EBS system. 33420.040 Air suspension system incl. 1 raising and lowering valve, mounted on the left side in the direction of travel behind the axle unit. Driving position is automatically adjusted. 34320.001 2 non-interchangeable coupling heads at the front, ISO 1728. 34410.010 Air tanks for brake system and air reservoir made of steel (EN 286-2). Floor: 40510.120 Flat floor approximately 30 mm thick, multi-layered glued plywood. 40513.015 Floor rear sealed. I 40542.023 Pockets for square tube inserts approximately 80 x 80 mm. Front Wall: I 41710.201 Front wall approximately 2,000 mm high with steel corner posts, with profiled sheet metal, screwed/riveted to the frame. 2 pairs of lashing points (permissible lashing force approximately 1,000 kg per ring) on the front wall according to EN Ljdpszqii Tjfx Afkjaf

Condition: used, empty load weight: 6,090 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2019, loading space volume: 26 m³, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, | Kögel 3-axle steel tipping trailer | Roll tarp | 25m³, steel tipping body | SAF axles with disc brakes | 1st axle liftable | Tyres: 385/65 R22.5 | Subject to error, input mistakes, and prior sale. Laodozt Igispfx Afksf

Condition: used, axle configuration: 2 axles, first registration: 06/2021, Equipment: ABS,

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment. Complete equipment available upon request. Chassis: Regular ladder frame in lightweight steel with continuous cross members. With front overhang of the chassis frame. Cover plate between the outer frame and the longitudinal member as tire protection for the rear wheels of the tractor unit. Coupling plate approx. 8 mm thick, with a 2-inch fifth-wheel coupling pin according to DIN 74080 / ISO 337. Suspension: Axle lift mechanism on axle 1. BPW three-axle unit ECO Air with disc brakes Ø approx. 370 mm, offset 120. Air suspension, approx. 260 mm travel. Vehicle tires: Tires 6-fold 445/45 R 19.5, 160J. Chassis components: Fifth-wheel coupling mechanically adjustable with leveling foot, approx. 24 t lifting capacity, one-sided operation on the right-hand side when driving. Tool-free folding side protection on the right and left sides when driving. Spare wheel storage with winch incl. 1 wheel mounting kit, mounted behind the axle unit. Storage for 16 square tube inserts, approx. 80 x 80 x 1,990 mm, installation on the side of the longitudinal member on the left and right sides when driving. Plastic toolbox, waterproof, dimensions (internal) approx. 545 x 400 x 400 mm, installation on the rear left side when driving. Access ladder on the rear right side, extendable. Brake / Air Suspension System: EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connection ISO 7638, (without connection cables). Parking brake as spring-loaded brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 connector. WABCO EBS system. Air suspension system incl. 1 lifting and lowering valve, mounted on the left side when driving behind the axle unit. The driving position is adjusted automatically. 2 non-interchangeable coupling heads at the front ISO 1728. Air reservoirs for the brake system and air supply made of steel (EN 286-2). Floor: Plate floor approx. 30 mm thick, multiply laminated plywood. Floor sealed at the rear. Beam pockets for square tube inserts approx. 80 x 80 mm, arrangement according to drawing J9: 8 beam pocket strips (18 beam pockets per strip: 4 each on the outside + 10 in the middle). Front Wall: Front wall approx. 2,000 mm high with steel corner posts, with profiled steel sheet, screwed/riveted to the frame, 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front wall according to EN 12640. Note: When using the front wall for load securing, suitable lashing straps must be used to tension the load, if the vehicle is operated without side walls and a rear flap/door! Side Wall: VarioFix steel outer frame without beam supports. 24 pairs of lashing brackets in the outer frame (according to EN 12640), permissible tensile force approx. 5,000 kg per ring. Lasdpfezp Aycjx Afksf Electrical System / Electronics: Light carrier made of steel, arranged above the underride protection. KÖGEL LUXIMA Premium Package, consisting of: LED license plate lighting, LED position lights and reflectors at the front, flashing LED side marker lights, Superseal and bayonet connectors of the lights. 2 outline lights with arm, mounted on multi-chamber rear lights. 2 multi-chamber rear lights. Adapter box permanently mounted with 2x7-pole socket (1 x ISO 1185 / 1x ISO 3731, 24 V-N / 24 V-S) and 15-pole socket ISO 12098. LED rotating beacon Compact or

Condition: used, maximum load weight: 12,880 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2016, next inspection (TÜV): 06/2026, loading space length: 7,231 mm, loading space width: 2,480 mm, loading space height: 2,431 mm, total length: 8,980 mm, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, Steel rims, air brake, disc brake, side door, wing doors, toolbox, SAF axles, used vehicle, electronic braking system Laedey Sdb Aopfx Afkef Vehicle no. 3365, ABS, EBS, length-adjustable towing drawbar, SAF axles with disc brakes, air suspension with lift and lowering system, tires: 385/65 R22.5, storage box, box body, rear portal doors, 2 x side doors on the right, anti-slip floor, lashing rails left and right, cargo area dimensions LxWxH: 7,231 x 2,480 x 2,431 mm, unladen weight: 5,120 kg, gross weight: 18,000 kg, 1st owner. For inquiries please, errors and interim sale reserved.

Condition: used, axle configuration: 3 axles, first registration: 08/2018, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, total length: 14,100 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 365/65R22,5, color: other, Year of construction: 2018, Equipment: ABS, = Additional options and accessories = - EBS - Alloy wheels = Notes = Number of axles: 3, Tare weight: 8730 kg, Gross vehicle weight: 39000 kg, Type of chassis: Full chassis, Alloy wheels, ABS, EBS, Body construction year: 2018, Refrigeration unit manufacturer: Thermoking, Refrigeration unit model: slxi300, Refrigeration unit: Compressor / electric, Unit hours / electric: 748, Unit hours / diesel: 6956, Wall thickness: 45 mm, Type of cooling: Cooling = Additional information = General information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual Axle configuration Tire size: 365/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 15 mm; Tire tread depth right: 15 mm Axle 2: Tire tread depth left: 12 mm; Tire tread depth right: 12 mm Axle 3: Tire tread depth left: 13 mm; Tire tread depth right: 11 mm Weights Unladen weight: 8,730 kg Payload: 30,270 kg GVW: 39,000 kg Functional Refrigeration unit: engine-driven (748 operating hours) Wall thickness: 45 mm Environmental Lodpfozhf Awsx Afkoaf Emission class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none Financial information Leasing price: €402 per month (default, 60 months); Inquire for more information and terms = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various model years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The assurance of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, maximum load weight: 29,220 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2020, next inspection (TÜV): 12/2026, loading space height: 3,000 mm, Equipment: ABS, Due to the large number of phishing and spam emails, email enquiries can only be processed if YOU PROVIDE A VALID TELEPHONE NUMBER! Unfortunately, we CANNOT process email enquiries WITHOUT a phone number! Thank you for your understanding! For telephone and WhatsApp enquiries, please: * Kögel Mega trailer * SAF axles with disc brakes * Mechanical lifting roof * Lift axle * Edscha sliding roof * Sliding curtain left & right * Loading height: 3.00 m * Air suspension with lifting/lowering function * Tyres: 385/55 R 22.5 Ljdpfeymvupox Afksaf * Tread depth: 5 / 6 / 6 mm Subject to errors and prior sale.

Condition: used, maximum load weight: 32,320 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2019, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2019, Equipment: ABS, Vehicle Description: Kögel S24-1 Cargo, Lifting Axle, BPW ECO Axles Air Compact, Edscha sliding roof, side curtains, mounted on both sides: Steel pallet stop strips with VarioFix hole pattern (bolted), VarioFix slotted frame, on both left and right sides in the direction of travel, for internal width 2,468 mm (loading height under outer rail is reduced by approx. 20 mm). Axle lift mechanism on axle 1, fully automatic, load-dependent axle lift control. Start assist: activation by pressing the brakes three times, 30% overload allowed up to a speed of 25 km/h. Plastic toolboxes EBS system 2S/2M with stability control program (includes ABS/ALB function). IDEM Telematics System BasicTrailer incl. GPS location monitoring, coupling status, EBS data. - Load securing certificate according to EN 12642 XL (VDI 2700). - Beverage certificate according to VDI 2700 Sheet 12 - Certificate "Daimler Cargo Securing DL 9.5". Technical Data: Permissible total weight: approx. 39,000 kg Basic equipment unladen weight: approx. 5,920 kg Unladen weight of customized vehicle configuration: approx. 6,333 kg Bed length (internal): approx. 13,620 mm Bed width (internal): approx. 2,480 mm Rear through-loading width: approx. 2,480 mm Loading height unladen, level travel position: approx. 1,220 mm Loading height laden, level travel position: approx. 1,190 mm Vehicle height set at 290 mm Side through-loading height (internal): approx. 2,680 mm Height under roof (internal): approx. 2,760 mm Front overhang (ISO 1726): approx. 1,685 mm Front overhang radius (ISO 1726): approx. 2,040 mm Rear swing radius (contrary to ISO 1726): approx. 2,100 mm Fifth wheel coupling height: approx. 1,130–1,190 mm Chassis: Axle lift mechanism on axle 1, fully automatic and load-dependent. Start assist via triple brake actuation, 30% overload up to 25 km/h. BPW ECO Axles Air Compact assembly with disc brakes Ø 430 mm, ET 120. Air suspension with 180 mm lift. Tyres: 6 x 385/65 R 22.5 tyres, 160J (European brand of Kögel's choice). Steel rims 22.5 x 11.75, offset 120 mm (ET 120). Tarp: Tarp rope with two holders on the front wall Sliding tarp, quality approx. 900g/m², with over-center tensioning system, according to DAIMLER cargo securing standard (DL 9.5). Documents: - Load securing certificate according to EN 12642 XL (VDI 2700). - Beverage certificate according to VDI 2700 Sheet 12 - Certificate "Daimler Cargo Securing DL 9.5". TECHNICAL DETAILS Gross weight: 39,000 kg Unladen weight: 6,330 kg Max payload: 32,670 kg Axle configuration: 3 Wheelbase: 6,390 mm Loading length: 13,620 mm Loading width: 2,480 mm Loading height: 2,710 mm First registration: 03/2019 Ledpfszq Hckex Afksaf Suspension: Air Color: Silver Tire size: 385/65R22.5 Features: ABS, EBS, Telematics A complete equipment list is available on request. Despite utmost care, errors in this advert cannot be excluded. Subject to prior sale and errors. Please request more information.

Condition: used, first registration: 04/2025, Year of construction: 2025, Equipment: ABS, Kögel MEGA S24 MEGA, lift axle on the 1st axle, lifting roof, Vario Loch-FIX frame, BPW axles, pallet stop strips left and right, sliding curtain sides, sliding roof cover, toolbox, 1st owner, as new condition. Permissible kingpin load: 12,000 kg Technical possible kingpin load: approx. 12,000 kg Permissible axle load: 24,000 kg (8,000 kg per axle) Technical possible axle load: approx. 27,000 kg (9,000 kg per axle) Permissible total weight: 36,000 kg Technical possible total weight: approx. 39,000 kg Unladen weight, basic equipment: approx. 6,130 kg Unladen weight, individual configuration: approx. 6,582 kg Theoretical payload: approx. 29,418 kg Floor load capacity according to DIN EN 283 with test axle load 7,200 kg (A) Wheelbase: approx. 6,390 mm (A1) Axle spacing: approx. 1,310 mm (A2) Axle spacing: approx. 1,310 mm (D) Overall length: approx. 13,950 mm (E) Overall width: approx. 2,550 mm (F) Internal loading length: approx. 13,620 mm Ledpfxszq Hbts Afkeaf (G) Internal loading width: approx. 2,480 mm (G2) Rear through-loading width: approx. 2,480 mm Tire size: 445/45R19.5 (H1) Loading height unladen, driving position level: approx. 1,020 mm (H2) Loading height laden, driving position level: approx. 990 mm (H3) Achievable dock height at rear with kingpin height 910 mm, loaded, raised: approx. 1,200 mm Ride height set to 265 mm. (K) Side through-loading height, internal: front approx. 2,735 mm - 2,860 mm [adjustable by 5x25 mm], rear approx. 2,810 - 2,860 mm [adjustable by 1x50 mm] (K1) Height under roof, internal: front approx. 2,875 mm - 3,000 mm [adjustable by 5x25 mm] | rear approx. 2,950 mm - 3,000 mm [adjustable by 1x50 mm] (X1) Overall height unladen, driving position level: = H1 + K + T +/- body height adjustment | = S + P + K + T +/- body height adjustment (X2) Overall height laden, driving position level: = H2 + K + T +/- body height adjustment Superstructure settings: The “Mega” superstructure design allows a height adjustment of 5x25 mm at the front and 1x50 mm at the rear. The relevant heights (total height, lateral through-loading height, internal height) change accordingly depending on the selected body setting. (T) Roof construction height, side: approx. 180 mm. Due to the design of the roof beam, the internal pallet-width height corresponds to the specified internal height under the roof. (N) Front overhang (according to ISO 1726): approx. 1,685 mm (N1) Front overhang radius (according to ISO 1726): approx. 2,040 mm (O) Rear swing clearance (according to ISO 1726): approx. 2,300 mm (P) Construction height above king pin: approx. 90 mm (S) Possible kingpin height unladen: approx. 930 - 1,060 mm, horizontal at approx. 930 mm (Pay attention to overall height!) Braking system in accordance with ECE-R13 Electrical system in accordance with ECE-R48 Wabco brakes, air suspension BPW triple-axle assembly ECO Air with disc brakes Ø 370 mm, ET 120, 260 mm air suspension stroke. 6 x 445/45 R 19.5 tires Pallet stop strips made of steel with VarioFix hole pattern (bolted), left and right in the direction of travel Vario Fix steel-perforated outer frame with 3 pairs of stanchion sockets Mechanical/hydraulic lift mechanism, lift height from lowest position approx. 500 mm/600 mm, 4 operating levers at each corner stanchion. Complies with safety regulations according to BGV D 29. (Lifting roof can only be operated with doors open!) Load securing certificate according to EN 12642 XL (VDI 2700). Road transport only. "Daimler load securing DL 9.5" certificate

Condition: used, maximum load weight: 32,130 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2023, next inspection (TÜV): 11/2025, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, Kögel S24-1 Safe-Server, RSAB System, double-sided Fast Quickslider side roof tarpaulins, floor pallet stop strips with Variofix stop strips with hole pattern, Vario-Fix perforated outer frame, partial cargo securing package for rear load securing consisting of 2 roof guide rails along the entire length right and left, 2 integrated vertical load bars, 3 sprung crossbars, double-sided Quicklock fast-release side tarpaulins, pallet box, BPW axles, axle lift system on axle 1, fully automatic load-dependent axle lift control. Start-assist: activation via 3x brake application, 30% overload up to a speed of 25 km/h. 2 plastic toolboxes EBS system 2S/2M with stability program (includes ABS/ALB function) Kögel Telematics System BasicTrailer incl. location monitoring, coupling status, EBS data - Certificate for load securing according to EN 12642 XL (VDI 2700). - Beverage certificate according to VDI 2700 Sheet 12 - "Daimler Load Securing DL 9.5" certificate - Certificate for waste paper transport Lodpfjzq Hcwox Afkoaf Very well-maintained, rarely used trailer, original net price: €41,900 Technical data: Technically permissible total weight: approx. 39,000 kg Basic equipment curb weight: approx. 6,870 kg Curb weight of individual vehicle configuration approx.: 6,333 kg Load area length int.: approx. 13,620 mm Load area width int.: approx. 2,480 mm Clear loading width rear: approx. 2,480 mm Loading height unladen in horizontal drive position: approx. 1,220 mm Loading height laden in horizontal drive position: approx. 1,190 mm Ride height set to 290 mm Side clear loading height int.: approx. 2,560 mm Internal height under roof: approx. 2,760 mm Front overhang (according to ISO 1726): approx. 1,685 mm Front overhang radius (according to ISO 1726): approx. 2,040 mm Rear swing radius (opposite to ISO 1726): approx. 2,100 mm Fifth wheel coupling height: approx. 1,130–1,190 mm Chassis: Axle lift system on axle 1 Fully automatic, load-dependent axle lift control. Start-assist: activation via 3x brake, 30% overload up to 25 km/h. BPW three-axle unit, with disc brakes Ø 430 mm, ET 120. Air suspension with 180 mm stroke. Tyres: 6x 385/65 R 22.5, 160J tyres (European brand of Kögel’s choice). Steel rims 22.5 x 11.75, offset 120 mm (ET 120). Documents: - Certificate for load securing according to EN 12642 XL (VDI 2700). - Beverage certificate according to VDI 2700 Sheet 12 - "Daimler Load Securing DL 9.5" certificate - Certificate for waste paper transport TECHNICAL DETAILS Gross weight: 39,000 kg Unladen weight: 6,870 kg Max payload: 32,670 kg Axle configuration: 3 Axle wheelbase: 6,390 mm Cargo area length: 13,620 mm Cargo area width: 2,480 mm Cargo area height: 2,710 mm First registration: 11/2023 Suspension: air Colour: black Tyre size: 385/65R22.5 Equipment: ABS, EBS, telematics Original net price: €41,900 A full list of equipment will be sent on request. Despite utmost care, errors within this advertisement cannot be ruled out. Subject to errors and prior sale! More information on request.

Condition: used, maximum load weight: 24,490 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 02/2018, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total width: 2,550 mm, total height: 3,990 mm, Year of construction: 2018, Equipment: ABS, Kögel Plane Mega Liner S 18 Edscha, hydraulic lift roof, color: white-black, 2-axle 2 axles Payload: 24,490 kg Tires: 445/45 R 19.5 Laedpfx Ajzq Ha Aefkef SAF axles Edscha tarp Sliding tarp Hydraulic lift roof with a total lifting height of 500 mm Floor 30mm thick, waterproof plate floor, cut edges sealed all around, continuous, waterproof bonding between chassis and floor plate with a durable, high-performance adhesive. Strength according to EN283, for floor loads up to a maximum of 7,000 kg forklift axle load. Premium visible sealing Accessories: Steel corner posts at the rear outside as a trapezoidal box, Delta rubber corner profile at the rear across the rear frame, pallet stop on the side rail, left, welded, approx. 20mm high Pallet stop on the side rail, right, welded, approx. 20mm high Steel front wall, continuous, with sturdy corner reinforcements, front wall reinforced on the inside with a screen-printed plate Loading area: 13620 x 2480 x 3000 mm Fifth wheel height unladen: 975 mm Multilock outer frame, universal cargo securing system every 100 mm Sliding step ladder at the rear Side marker lights in LED design 1 rear fog light 1 reversing light 10-year Krone manufacturer's warranty against rust-through Detailed construction description of the semi-trailer will be sent upon request. Tested cargo securing (EN 12642 XL)

Condition: excellent (used), functionality: fully functional, overall weight: 44,000 kg, axle configuration: 3 axles, suspension: air, Year of construction: 2016, Equipment: ABS, tail-lift, KOGEL SEMI-TRAILERS Laedpfx Aszqgdhsfkof AIR SUSPENSION LIFT AXLE SLIDING ROOF MERCEDES AXLES ROOF LIFTING SYSTEM EBS

Condition: used, mileage: 65,400 km, first registration: 02/2019, overall weight: 16,000 kg, color: blue, total length: 7,450 mm, total width: 2,500 mm, total height: 2,450 mm, loading space length: 7,250 mm, loading space width: 2,450 mm, loading space height: 2,350 mm, Year of construction: 2019, * Kögel interchangeable platform trailer, formerly used by a driving school * Rear portal doors * Sliding tarpaulin, right and left * Possibly with an Edscha cover Ljdpfszgpkiox Afkjaf * and more * Subject to errors, changes, and prior sale.

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2015, next inspection (TÜV): 03/2027, loading space length: 7,450 mm, Year of construction: 2015, Equipment: ABS, * well-maintained chassis * disc brakes * air suspension Lodpfxszfb E No Afkjaf * ABS * and more

Condition: used, maximum load weight: 27,550 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 01/2008, loading space length: 13,636 mm, loading space width: 2,480 mm, loading space height: 3,008 mm, loading space volume: 101 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * Wabco Trailer EBS/ABS/ALB * EdScha sliding tarpaulin * SAF axles with disc brakes * Haldex air system * 2 toolboxes * 2 fire extinguishers ----* Tire size: 435/50R19.5 * Technical gross vehicle weight: 39,000 kg Ljdpfxoynd S Es Afkeaf * Tare weight: 7,450 kg * Overall length: 13,950 mm * MOT/Technical inspection: expired ----Vehicle number: 11778 Errors and prior sale excepted.----Advertisements and various lettering have been digitally removed. -----We will gladly assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of everything. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, MOT/technical inspection, complete export processing, assistance with financing, application for export license plates, vehicle transport, vehicle registration, salvage and vehicle transport. -----Your VTS Team

Condition: used, first registration: 07/2022, Kögel central axle swap body trailer, 22.5-inch deep, rigid drawbar, SAF axles, tire size 385/55 R22.5, for swap bodies C715, C74, C782, for bridge heights from 1,120 mm to 1,320 mm. 3 units available! Sale exclusively to businesses, with no warranty whatsoever. Errors and prior sale excepted. Ljdpszi A R Uefx Afkoaf

Condition: used, first registration: 04/2016, Year of construction: 2016, KÖGEL SN 24 *MEGA curtain-sided semi-trailer *Tautliner *Lift axle *Hydraulic roof - 5 units available! Ledpfxjzfxnnj Afksaf • ABS • EBS • XL-12642 Load securing certificate • EDSCHA - Cover • Storage box on the right front • Storage box at the rear • Rear portal doors • Internal dimensions: 13,620 x 2,490 x 2,970 mm (L x W x H) • Mechanical hydraulic roof • Permissible gross vehicle weight: 39,000 kg • Tare weight: 6,210 kg • Disc brakes • Lift axle • 3 x air-suspended SAF axles • Lifting/lowering system • Tire size: 435/50 R19.5 • Tire tread: 7/6 7/2 3/7 - German semi-trailer! - TÜV/inspection upon request and for an additional charge: new! Errors and prior sale excepted!

Condition: used, first registration: 02/2014, Year of construction: 2014, KÖGEL SN 24 MEGA-curtain-sided semi-trailer, tautliner, lift axle, tilting roof - 5 units available! • ABS • EBS • XL-12642 load securing certificate • EDSCHA – canvas cover • Storage box on the right front side • Storage box at the rear • Rear portal doors • Internal dimensions: 13,620 x 2,490 x 2,970 mm (L x W x H) • Mechanical tilting roof • Permissible total weight: 39,000 kg • Unladen weight: 6,710 kg • Disc brakes • Lift axle • 3 x air-suspended SAF axles • Lifting/lowering system Lsdszfxnhjpfx Afksaf • Tire size: 435/50 R19.5 • Tire tread: 7/6, 7/2, 3/7 - German trailer! - TÜV/technical inspection and safety check upon request and for an additional charge: new! Subject to errors and prior sale!

Condition: used, axle configuration: 3 axles, first registration: 10/2015, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R52,25, wheelbase: 9,010 mm, color: other, Year of construction: 2015, Equipment: ABS, tail-lift, = Additional Options and Accessories = Lasdpfxezcl R So Afkef - EBS - Tail lift = Notes = Number of axles: 3, Payload: 35650 kg, Tare weight: 6350 kg, Gross vehicle weight: 42000 kg, Type of chassis: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body construction year: 2015, Sliding roof, Axle type: SAF, Tail lift, Tail lift design: under-folding tail lift, Tail lift load capacity: 2500 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel and aluminum, Tail lift size: 170x240, TAIL LIFT = Further Information = General Information Cab: Day cab Registration number: ON-99-YT Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tire size: 385/65R52.25 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 6 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 9 mm; Tire tread depth right: 9 mm Axle 3: Tire tread depth left: 4 mm; Tire tread depth right: 2 mm Weights Tare weight: 6,350 kg Payload: 35,650 kg GVW: 42,000 kg Functional Tail lift: Dhollandia, under-run flap, 2500 kg Sliding roof: Yes Environmental Emission class: Euro 0 Maintenance APK (Technical Inspection): valid until 10.2026 Condition General condition: average Technical condition: average Optical condition: average Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands in various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, maximum load weight: 15,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2024, Int.-No.: Kögel Like-new trailer Kögel * AW 18-19.5 * BDF flatbed interchangeable chassis * 2-axle * SAF axles * permissible GVW 18,000 kg Trade-ins accepted Financing available from 3.99% Laodpfx Ajzp S N Tofkjf Errors and prior sale excepted! The information in this advertisement is a non-binding description and does not constitute guaranteed characteristics. The seller assumes no liability for typographical and data transmission errors. Listed features are subject to separate verification. All information in the advertisements is non-binding! Delivery throughout Germany upon request. Opening hours: Monday to Thursday from 9:00 a.m. to 5:00 p.m. Friday from 9:00 a.m. to 2:00 p.m. and by appointment!!!

Condition: used, maximum load weight: 35,750 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 10/2026, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Braking system according to ECE-R13 Electrical system according to ECE-R48 The Kögel superstructure guideline must be observed! It can be accessed at [website address] Frame Chassis frame made of high-quality steel, but without an outer frame Coupling plate with a 2-inch kingpin according to DIN 74080 / ISO 337 With cross member and container locking mechanisms for accommodating: a) 1 x 40' High-Cube container (frame extended), b) 2 x 20' ISO containers (frame extended), c) 1 x 30' ISO container flush at the rear (frame extended), d) 1 x 20' ISO container flush at the rear (frame retracted), e) 1 x 20' ISO container in the middle (frame retracted) 4 pairs of heavy-duty lashing rings Frame extension at the rear, extendable by approx. 1,370 mm, load capacity 5,800 kg, with spiral cable, adjustable in length via 1 pneumatic cylinder, low-maintenance guide on special plastic sliders and 2 extension rollers Automatic pneumatic locking of the extension Suspension Axle lift mechanism on axle 1 Control of the axle lift fully automatic, load-dependent Starting aid: activation via 3x brake, 30%, overload up to a speed of 25 km/h Operation on the chassis via switch, also possible from the driver's cab (switch in the cab required - PIN 12) Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, ET 120 Air suspension with approx. 180 mm travel Vehicle tires Tires 6-fold 385/55 R 22.5, 160J 6 steel rims 22.5 x 11.75, offset 120 mm (ET 120) Chassis components Landing gear, mechanical with leveling foot, 24 t lifting capacity, single-sided operation on the right-hand side while driving Spray protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires, consisting of: 3 pairs of semi-circular fenders with spray flaps 2 chock blocks with bracket Lateral protection device, according to ECE-R73, closed Underrun protection made of square steel tube according to ECE-R58 with a light carrier arranged above, protected Height of the underrun protection profile min. 120 mm, designed for increased test forces Brake / Air suspension system EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connection cables), parking brake as spring brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 plug connection Air suspension system incl. 1 raising and lowering valve, mounted on the left-hand side in the direction of travel in front of the axle unit 2 non-interchangeable coupling heads at the front ISO 1728 Air tanks for braking system and air supply made of steel (EN 286-2) Ledpfx Afszkx Ifokjaf Rear impact guard Solid steel rear impact guard on the rear end cross member Electrical system / Electronics Light carrier made of steel, arranged above the underrun protection KÖGEL LUXIMA Premium package, consisting of: LED license plate lighting, LED side marker lights and reflectors at the front, flashing LED side marker lights, Superseal and bayonet connectors for the lights 2 LED outline lights with arm, mounted on multi-chamber tail light 2 LED multi-chamber tail lights (without LCG) Plug connection at the front, 15-pole ISO 12098 (without connection cables) Corresponds to vehicle class FL, AT Information systems Kögel Telematics System BasicTrailer incl. location monitoring, coupling status, EBS data The monthly fees are regulated in a separate contract Signage Orange

Condition: used, maximum load weight: 36,250 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 10/2025, next inspection (TÜV): 10/2026, Equipment: ABS, Excerpt from the equipment list. Complete equipment list available upon request. Frame: Chassis frame made of high-quality steel, but without an outer frame. Coupling plate with a 2-inch drawbar eye according to DIN 74080 / ISO 337. With crossmember and container locking mechanisms for accommodating: a) 1 x 45' High-Cube container b) 1 x 40' High-Cube container c) 1 x 30' ISO container, flush at the rear d) 2 x 20' ISO containers e) 1 x 20' ISO container, flush at the rear g) 1 x 45' ISO container h) 1 x 40' ISO container With 1 pair of height-adjustable container locking mechanisms and 3 pairs of foldable center supports, plus crossmember and container locking mechanisms for accommodating: f) 1 x 20' ISO container in the center Frame extension at the rear, mechanically extendable, load capacity approx. 5,800 kg, with spiral cable. Low-maintenance guidance on special plastic sliders and 2 extension rollers. KÖGEL frame extension at the front, manually extendable and mechanically lockable, incl. container guide on the left and right. Designed according to Directive 719/2015. Frame extension in the center, manually extendable and mechanically lockable with the tractor unit. Chassis: Axle lift mechanism on axle 1. Control of the axle lift is fully automatic and load-dependent. Starting aid: Activation via 3x brake, 30% overload up to a speed of 25 km/h. Operation on the chassis via switch. Additionally possible from the cab (switch in the cab necessary - PIN 12). When transporting 30' and 45' containers, the 1st axle CANNOT be lifted! BPW three-axle unit, with disc brakes Ø approx. 430 mm, mounting depth approx. 120 mm. Air suspension with approx. 180 mm travel. Vehicle Tires: Wheels with internal sensors according to UN ECE R141. Tires 6-fold 385/55 R 22.5 UNIROYAL TH 50. 6 steel rims 22.5 x 11.75, mounting depth approx. 120 mm (ET 120). Chassis Components: JOST landing gears, mechanically operated with leveling foot, 24 t lifting capacity. One-sided operation in the direction of travel, on the right. Splash guard system (spray suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires, consisting of: 3 pairs of semi-circular fenders with mud flaps. 2 chock blocks with holder. Side protection, according to ECE-R73, closed. Rear underrun protection made of square steel tube according to ECE-R58, screwable. Height of the underrun protection profile min. 120 mm, designed for increased test forces. Brake / Air Suspension System: EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638 (without connection cables), parking brake as spring brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 plug connection. Air suspension system incl. 1 raising and lowering valve, mounted on the left in the direction of travel in front of the axle unit. 2 non-interchangeable coupling heads at the front ISO 1728. Air reservoir for brake system and air supply made of steel (EN 286-2). Rear Impact Protection: Continuous steel rear impact protection, solid, on the end member at the rear. Information Systems: Tire pressure monitoring system according to UN ECE R141. Accessories: Document tube, diameter approx. 105 mm. Mounting on the left in the direction of travel on the side protection. 1 fire extinguisher 6 kg with pressure gauge (European approval). Mounting incl. holder and protective cover on the left in the direction of travel o Ledpfxezkx Hzo Afkoaf