Used Ingersoll-Rand Ingersoll Rand Compressor for sale (3,708)

Condition: excellent (used), Year of construction: 2004, Fini Cube 10- This is a compact 10HP industrial screw compressor. It can deliver max pressure of 10 bar with a 7.5KW electric motor. I was purchased in 2004 and was serviced on a yearly basis by the fully trained technicians of the local Fini agents. This compressor was used as a back up compressor to our Fini BSC 20 compressor so it was only used periodically to ensure it functionality when required. Fsdpfxjzluihj Aivsgh It come complete with an MTA air dryer.

Condition: repair required (used), Year of construction: 2018, operating hours: 34,881 h, functionality: limited functionality, power: 45 kW (61.18 HP), volume flow: 502.2 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Equipment: type plate available, Screw compressor Fodpfjz Iz Itex Aivegh 45 kW 8.50 bar 8.37 m3/min Year of manufacture: 2018 Operating hours: 34,881 Problem with the cooling system. The temperature is rising rapidly. The compressor is running.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, General overhauled OPS Ingersoll Gantry 500 Wire EDM machine – in top technical and optical condition. Fodpfxoyrqpfe Aivegh The machine has been comprehensively and professionally overhauled in our workshop and is in very good condition both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional check using a laser measuring system were performed. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine was completely repainted and is now in very good cosmetic condition. The generator and control unit were cleaned and technically inspected. The air conditioning unit of the generator was also cleaned to ensure reliable cooling and stable operation. Finally, the machine was subjected to an extensive erosion test according to the quality and testing specifications of OPS Ingersoll. The machine is immediately ready for operation and is ideal for reliable production. Technical data: Ingersoll (OPS Ingersoll) Wire EDM machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture 2009 Control system EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld device Manual erosion with Powertec Handheld High-speed jump max. 18 m/min Generator output 60 amps, EAGLE Powertec Travel ranges (X, Y, Z) 525 x 400 x 450 mm Electrode changer 20-position pick-up disc changer Work tank (W x D x H) 770 x 670 x 440 mm Work table (W x D) 750 x 650 mm Load capacity 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 30.09

Condition: excellent (used), Offer consisting of: complete compressed air system comprising SCC Flexi 55kW screw compressor, air-cooled, SCC DRA 480 refrigerant dryer, only about 2000 load hours, compressed air tank 1000 litres (OKS brand), year of manufacture: 2021 Fgedpoyl S Ebofx Aivjh

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, table load: 500 kg, OPS INGERSOLL GANTRY EAGLE 400 Fodpfx Aezwcfheivegh Year of manufacture: 2015 Completely overhauled August-September 2026 EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld multifunctional operating device Manual eroding with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 amps (60 amps peak current) High-speed jump max. 18,000 mm/min Travel ranges (X, Y, Z) 420 x 300 x 300 mm Linear measuring system in all axes Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Working tank (W x D x H) 650 x 500 x 340 mm Work table (W x D) 550 x 470 mm Load capacity 500 kg Overhang load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system The machine is currently undergoing overhaul. Original images will follow. 08/28.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 11,298 h, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of September 21st to October 1st! TECHNICAL DETAILS Travel in X-axis: 700 mm Travel in Y-axis: 550 mm Travel in Z-axis: 450 mm Feed Axes Max. travel speed X, Y, and Z axes: 30 m/min Max. acceleration X, Y, and Z axes: 15 m/s² Positional accuracy TP according to DIN ISO 230-2: 0.005 mm Repeatability: 0.002 mm Work Table Table length: 850 mm Table width: 700 mm Number of T-slots: 5 T-slot dimensions: 18 H12 Table load: 2,000 kg Max. workpiece weight: 2,000 kg Distance spindle center – table: 550 mm Spindle Spindle mount: HSK-E 40 Spindle speed: 3,000 - 42,000 rpm Spindle power: 17 kW Tool Changer Tool magazine positions: 40 MACHINE DETAILS Machine type: CNC HSC machining center CNC control: Andronic Electrical Connection Data Supply voltage: 400 V Supply frequency: 50 Hz Fuse rating: 32 A (?) Dimensions and Weight Overall length: 3,300 mm Overall width: 2,300 mm Overall height: 2,300 mm Overall weight: 7,700 kg Operating Data Machine operating time: 275 d 5 h 13 min 39 s Spindle operating time: 11,297 h 20 min 11 s Fgedpfx Asz Aplleivsh EQUIPMENT - Full enclosure - Dust and fluid-proof guides - Oil mist extraction - Compressor cooler - Frequency inverter - Heidenhain glass scales in X, Y, and Z axes - Work light in the interior - Technical documentation - Workbench - HSK-E-40 tool holders - Tools - Workbench dimensions: approx. 1,500 × 900 × 1,100 mm External Reference: Demo - Lot 2

Condition: used, We offer pallets of approximately 5,000 kg open-type compressors, featuring a mix of Bitzer, DWM, and Bock units. This lot has been assembled for trade, export, and stock building purposes and is sold as a single complete batch. The entire package is available for one fixed package price. No individual sales are offered. If you have any questions or require additional availability, please contact us. Fsdpfoycvkvjx Aivegh

Condition: good (used), Cooling compressor Stal KTK 207 Fgsdpfx Aioyb Rqusvoh 25-33 Bar YOM 1991 Good condition Dimensions (LxWxH): 4700x2200x1450 mm

Condition: used, functionality: limited functionality, The following are offered: Fgedpfxezzavre Aivjh OPS 650 (5-axis): Tool changer with 40 positions for HSK E40 OPS 550 (3-axis): Tool changer with 32 positions for HSKE 40 Robot stations for the Erowa clamping system: 70 positions (workpiece changer) Robot stations for pallet changing: 8 positions The robot is currently not in operation due to a malfunction. However, this can be repaired so that it functions normally again. The cooling unit for the 650 machine is external.

Condition: ready for operation (used), Year of construction: 2005, number of axes: 4, This 4-axis INGERSOLL Gantry 400 was manufactured in 2005. It features a main voltage of 400 V and operates at a frequency of 50 Hz. The machine is equipped with a Multipulse64 control system, ensuring precision in die-sinking applications. If you are looking to get high-quality die-sinking capabilities, consider the INGERSOLL Gantry 400 machine we have for sale. Contact us for further details. • Control system: Multipulse64 • Electrical specifications: • Main/operating voltage: 400 V (3-phase) • Frequency: 50 Hz Fgsdpfx Aiez Dv I Tevsh • Control voltage: AC / 24 V DC • Current consumption/power input: 15 A • Max. backup fuse: 25 A

Condition: used, Year of construction: 2016, functionality: fully functional, We are offering a used screw compressor for sale. KAESER screw compressor - SK22 Serial No.: 1558 Year of manufacture: 2016 Rated power: 11.0 kW Motor speed: 2,960 rpm Max. operating pressure: 8.0 bar Ambient temperature: 3 - 45°C Integrated or separate dryer Oil separator Control panel All available attachments Operating hours under load: Unit 1: approx. 2,500 hours Unit 2: approx. 1,000 hours Compressed air tank: 2,000 liters Tank design: hot-dip galvanized Price: €14,500.00 net €17,255.00 gross Fgedpfsz Iy Niex Aiveh This is a used item. DESIGN Our sales team will gladly prepare a non-binding offer tailored to your requirements. TRANSPORT & INSTALLATION We will be happy to assist you with the transport and installation of the equipment. TERMS OF PAYMENT Terms of payment will be agreed upon in the event of an order. The price is quoted as a unit price/net price, or as stated in the product description (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US DLK in Nordhorn trades in new and used products in the fields of warehouse logistics, conveying technology, storage platforms, textile storage, and machines for retail, industry, and trades. We continuously offer interesting used items from various manufacturers/brands at attractive prices. If you have any questions, please do not hesitate to contact us.

Condition: repair required (used), Year of construction: 2010, operating hours: 64,380 h, functionality: unexamined, power: 132 kW (179.47 HP), volume flow: 1,562.4 m³/h, pressure (max.): 8.1 bar, type of cooling: water, Screw compressor Atlas Copco GA132VSDW Inverter integrated 132 kW 8.10 bar 26.04 m3/min Year of manufacture: 2010 Fsdszznqkopfx Aivogh Operating hours: 64,380 h

Year of construction: 1996, condition: used, X-axis: 525mm, Y-axis: 400mm, Z-axis: 450mm, Y-axis at electrode change and loading position: 675mm, internal dimensions of working tank: 750x650x420mm, max. dielectric level: 375mm, max. head load: 100kg, distance from tool carrier plate to worktable: 135-585mm, integrated C-axis speed, adjustable: 1-20rpm, measuring resolution: 0.001°, load capacity with manual electrode change: 50kg, load capacity with automatic electrode change: 15kg, support surface: 730x630mm, worktable load capacity: 1,000kg, connected load: 7kVA, fuse protection: 25A, length: 2900mm, width: 2200mm, height: 2653mm, machine weight: 4.4t, generator weight: 200kg, with documentation, C-axis, EW20 electrode changer, TAE M10 cooling unit, CO2 fire extinguishing system, 4µm filter system, locators, MultiProg software, an on-site inspection is possible. Fsdpfx Aoz Ekc Ujivogh

Condition: refurbished (used), Year of construction: 2005, travel distance X-axis: 1,050 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,000 mm, workpiece weight (max.): 20,000 kg, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 2,520 mm, workpiece width (max.): 1,520 mm, workpiece height (max.): 945 mm, feed rate Z-axis: 12 m/min, overall weight: 30,000 kg, table load: 20,000 kg, # OPS INGERSOLL GANTRY 1500 / 64 Bit ## Completely Overhauled – Completion Expected 10/2026 For sale is an OPS INGERSOLL wire EDM machine, model GANTRY 1500 / 64 Bit, manufactured in 2005. This machine will undergo a comprehensive and professional overhaul in our facility. Upon completion of the overhaul, the machine will be in very good technical and optical condition and will be ready for immediate use in reliable production operations. Fodpfx Aijz Atdrovegh ### Technical Data Manufacturer: OPS INGERSOLL Model: GANTRY 1500 / 64 Bit Year of Manufacture: 2005 Condition: Completely Overhauled Completion: Expected 10/2026 Control: Mitsubishi – 64-bit CNC Generator Power: 70 A – Multipulse Travel Ranges X / Y / Z: 1,050 × 2,000 × 1,000 mm Electrode Changer: 15-position pick-up disc changer Work Tank (W × D × H): 1,520 × 2,520 × 945 mm Workpiece Clamping Table (W × D): 1,380 × 2,380 mm Load Capacity: 20,000 kg ### Accessories * CO₂ fire extinguishing system * Cartridge filter system ## Extensive Overhaul The OPS INGERSOLL GANTRY 1500 will undergo a comprehensive and professional overhaul in our facility. As part of the overhaul, the machine will be disassembled to over 70%. All relevant components and wear parts will be carefully inspected and, if necessary, professionally repaired or replaced. ### The following overhaul work will be carried out: * Inspection and, if necessary, replacement of the ball screws and ball bearings of the X, Y, and Z axes * Inspection and, if necessary, replacement of all four ball screws of the tank drive * Inspection and testing of the C-axis for tightness and accuracy * Geometric inspection of all axes according to the OPS INGERSOLL test protocol * Thorough cleaning of the entire machine base * Cleaning of the entire work tank, including replacement of the felt wipers * Overhaul of the dielectric pumps * Replacement of all hydraulic and dielectric lines * Replacement of all pneumatic lines * Thorough cleaning of the control cabinet, generator, and control system * Replacement of all relevant fans and batteries * Overhaul or, if necessary, replacement of power supplies, units, and servo amplifiers * Final laser measurement of the machine after the overhaul is completed ## Quality Inspection and Erosion Test After completion of all overhaul work, the machine will undergo a comprehensive functional and quality inspection. This includes, in particular, a detailed erosion test according to the quality and testing requirements of OPS INGERSOLL. This test will verify the relevant machine functions as well as the accuracy and process reliability. ## Ready for Production After Overhaul After successful completion of the overhaul and final inspection, the OPS INGERSOLL GANTRY 1500 / 64 Bit will be immediately ready for use. With its high load capacity of 20,000 kg, the generous travel ranges, and the large work area, this machine is particularly suitable for the reliable machining of large and heavy workpieces in demanding production environments. A powerful and comprehensively overhauled wire EDM machine for users who value high machine quality, process reliability, and long-term operational capability.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn – quick programming Powertec Handheld – multifunctional manual control device Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Fjdpfoyzw I Isx Aivogh Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special features: Linear measuring system on all axes (Z axis standard in series)

Year of construction: 2008, condition: ready for operation (used), A CNC high-speed machining center OPS Ingersoll in gantry design is available. Materials: graphite/copper/aluminum/plastics/hard machining, travel X/Y/Z: 700mm/550mm/450mm, table dimensions X/Y: 850mm/700mm, max. workpiece weight: 2000kg, tool holder to table distance range: 20mm-520mm, tool holder: HSK-E40, spindle: Fischer mW 9/10-4, speed: 42000rpm, spindle power: 17kW, spindle runout accuracy: µm, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3200mm/2500mm/2700mm, weight: approx. 9000kg, control: Andronic 2060. Documentation available. An on-site inspection is possible. Fjdpfxjzh Nhwj Aivogh

Condition: like new (used), Year of construction: 2014, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 1058, overall weight: 7,000 kg, total length: 3,706 mm, total width: 2,276 mm, total height: 2,360 mm, power: 315 kW (428.28 HP), volume flow: 2,382 m³/h, operating pressure: 15 bar, pressure (min.): 4 bar, pressure (max.): 15 bar, noise level: 79 dB, type of cooling: air, Equipment: compressor, documentation/manual, type plate available, Kaeser FSD571SFC, 315kW Variable speed drive screw compressor, purchased and installed in 2014, the machines were never commissioned or used, so have only 2 hours manufacturers hours use. Can be viewed running in our facility in York UK prior to purchase Fsdpfx Aezww H Tjivegh

Year of construction: 2003, condition: good (used), EDM machine Machine type: OPS Ingersoll Gantry 5000 Year: 2003 SPECIFICATIONS Fgsdpfxozi Sfuj Aiveh Travel

Condition: good (used), Year of construction: 2001, Atlas Copco SF 15 oil-free scroll compressor The SF series utilizes scroll technology, which eliminates metallic contact between the compression elements, meaning that absolutely no oil is required in the compression chamber. This makes the system ideal for applications that require completely clean and oil-free compressed air (e.g., in laboratory, medical, or food processing environments). The three installed scroll compressor elements have recently been overhauled or replaced. Operating hours (total): 15,983 hours (the actual time the compressor has been running since 2001). Controller hours: 99,527 hours (the time the controller was energized). Operating times of the individual scroll elements (compressor stages): Operating hours, element 1: 735 hours Operating hours, element 2: 735 hours Operating hours, element 3: 736 hours Technical data: Manufacturer: Atlas Copco Model / Product type: SF 15 (Oil Free Air) Serial number: ATI 502157 Maximum operating pressure: 8 bar(e) Delivery rate (Free Air Delivery): 24.7 l/s Shaft rated power: 14.8 kW Shaft rated speed: 1500 rpm Total weight: 590 kg Year of construction: 2001 Controller: Elektronikon (digital display) Length: 1.21 meters Fsdpozwmd Usfx Aivegh Width: 0.96 meters Height: 1.66 meters "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 2009, operating hours: 4,247 h, functionality: fully functional, machine/vehicle number: 655118, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 42,000 rpm, swivel angle A-axis (min.): -120 °, swivel angle A-axis (max.): 60 °, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between September 21st and October 1st! TECHNICAL DETAILS Travel range X-axis: 550 mm Travel range Y-axis: 400 mm Travel range Z-axis: 400 mm Swivel angle A-axis: -120° to +60° Swivel angle C-axis: n x 360° Distance from HSK-E tool holder to table: 450 mm Clamping area: 650 x 800 mm Pallet dimensions for 4th and 5th axes: approx. 300 x 300 mm Spindle Spindle mounting: HSK-E 40 Spindle speed: 0 to 42,000 rpm Spindle power S1: 15 kW Spindle power S6: 17 kW Axes and Accuracy Drive type: Digital AC servo motors, fully synchronized Travel speed: max. 30 m/min Acceleration: max. 15 m/s² Repeatability: 0.002 mm Digital display: 0.001 mm or 0.0001 mm, selectable Nominal speed in NC axis operation A-axis: 40 min⁻¹ Nominal speed in NC axis operation C-axis: 40 min⁻¹ Tool Changer Type: Pick-up disc magazine Magazine slots: 32 MACHINE DETAILS Machine operating time: 484 d 11 h 24 min 06 s Spindle operating time: 4,246 h 55 min 36 s Type: 5-axis CNC machining center Connected load: 38 kVA Input voltage: 400 V AC, 3-phase, 50 Hz Fgedpfszquprsx Aivoh Control voltage: 24 V DC Fuses: max. 63 A Overall length: 3,300 mm Overall width: 2,200 mm Overall height: 2,300 mm Machine weight: 7,400 kg EQUIPMENT - Technical documentation and manual - Three spare pallets - HSK-E-40 tool holders - Pallets with attached specific fixtures External reference: Demo - Lot 1

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 675002, travel distance X-axis: 650 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 500 mm, empty load weight: 13,000 kg, TECHNICAL DETAILS Travel range, X-axis: 650 mm Travel range, Y-axis: 1,100 mm Travel range, Z-axis: 500 mm C-axis rotation: 360° Tool magazine slots: 32 pcs. MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,800 x 2,800 mm Dry weight: 13,000 kg Fgjdpfx Aiezxckmovjh Transport packages: 3 pcs. EQUIPMENT Documentation CE marking

Condition: like new (used), Year of construction: 2021, operating hours: 57 h, functionality: fully functional, machine/vehicle number: V002117/16, overall weight: 450 kg, power: 7.5 kW (10.20 HP), fuel type: electric, volume flow: 66 m³/h, operating pressure: 10 bar, pressure (min.): 0.5 bar, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, Hertz HBD 7 screw compressor, 7.5 kW – 10 bar – 57 operating hours – including refrigerated dryer Description: Hertz HBD 7 screw compressor – in like-new condition – only 57 operating hours. For sale is a Hertz HBD 7 screw compressor system from 12/2021 with only 57 operating hours. The system has been operated very little and is in very good, like-new condition, both visually and technically. Fgodpfx Aiszt Srijvjh Technical data of the compressor: * Manufacturer: Hertz Kompressoren * Model: HBD 7 * Year of manufacture: 12/2021 * Operating hours: only 57 hours * Power: 7.5 kW * Max. pressure: 10 bar * Volume flow: 1.1 m³/min * Voltage: 400 V / 3 phases * Frequency: 50 Hz * Screw compressor, oil-cooled * Serial number: see nameplate Refrigerated dryer: * Model: Dryair DK 40 * Year of manufacture: 12/2021 * Max. pressure: 16 bar * Power: 0.37 kW * 230 V / 50 Hz * Refrigerant: R134a The system is mounted on a compressed air tank and is ready for immediate use as a complete unit. The photos show the actual system being offered. Price: €6,900 net, negotiable plus statutory VAT. Inspection and test run possible by arrangement. Collection preferred. Loading can be arranged by agreement.

Condition: excellent (used), Year of construction: 2011, Control PC-NC Dialog Fgsdpszfx S Hjfx Aivjh Travel paths X/Y/Z: 1000/1510/700 mm C-axis 30-way electrode changer Hirschmann clamping system Support surface WxD 1140/1640 mm Load capacity 7500 kg Filter system Fire extinguishing system

Condition: defective spare-parts repository (used), Year of construction: 2004, functionality: not functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, For sale are spare parts from a 3-axis CNC machining center of the brand Ingersoll, model OPS 800. Ideally suited for the production of graphite electrodes thanks to its high-speed spindle. The machine has been disassembled, and individual components such as the controller, extraction system, spindle, and control panel are available for sale. Please let us know which parts you require, and we will provide you with a tailored offer. Technical Data: Year of manufacture: 2004 X-axis travel: 800 mm Y-axis travel: 700 mm Fsdpjuu Rthsfx Aivogh Z-axis travel: 500 mm Control system: ANDRON Spindle speed: 42,000 rpm Tool changer: 36 positions Tool holder: HSK 63 Included: - Graphite dust extraction system - Chip trays - Cooling system Tooling not included. Transport and loading can be organized throughout Europe upon request and at an additional cost. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-ins or exchanges possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Condition: used, Year of construction: 2005, machine/vehicle number: 660093, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. For sale is a vertical machining center from the manufacturer OPS INGERSOLL, model: OPS 600. Fgodpfx Aiszy Ukbevjh MACHINE DETAILS Operating voltage: 400 V 3~ Frequency: 50/60 Hz Control voltage: 24 V DC Current consumption: 22 A Pre-fuse: max. 32 A