Used Horizontal Meat Mixer for sale (9,569)

Condition: new, Year of construction: 2025, functionality: fully functional, degree of automation: automatic, Pneumatic press for raw dried delicacies. Made completly of stailes steel. Powered by air- 6 bar Lredpfswqcbfex Al Isn Measurments: by client demands

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO Concrete Mixers; single shaft, twin shaft and planet-type models are produced in three different models and different capacities. The durable and long-life wearing plates, reinforced mixing arms and paddles, has been projected by our engineers to suit every need and capacity. Our mixers have a significant market share both at home and abroad with the price advantage brought by mass production, short delivery time, quality manufacturing and spare part supply guarantee. Technical details: Lrsdpfx Aezar Rmel Ion  Type: Twinshaft mixer (TWS 03)  Wet concrete capacity: 3 m3  Dimensions (length x width x height): 2300 x 4090 x 2750 mm  Feeding capacity: 4500 lt  Fresh concrete capacity: 3750 lt  Compacted concrete capacity: 3000 lt  Motor power: 2 x 55 kW  Hydraulic discharge gate  Automatic lubrication FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, power: 45 kW (61.18 HP), color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO Concrete Mixers; single shaft, twin shaft and planet-type models are produced in three different models and different capacities. The durable and long-life wearing plates, reinforced mixing arms and paddles, has been projected by our engineers to suit every need and capacity. Our mixers have a significant market share both at home and abroad with the price advantage brought by mass production, short delivery time, quality manufacturing and spare part supply guarantee. Technical details:  Type: Twinshaft mixer (TWS 02)  Wet concrete capacity: 2 m3  Dimensions (length x width x height): 2000 x 3400 x 2450 mm  Feeding capacity: 3000 lt  Fresh concrete capacity: 2500 lt  Compacted concrete capacity: 2000 lt Lredpfx Alozar Raj Ien  Motor power: 2 x 45 kW  Hydraulic discharge gate  Automatic lubrication FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO Concrete Mixers; single shaft, twin shaft and planet-type models are produced in three different models and different capacities. The durable and long-life wearing plates, reinforced mixing arms and paddles, has been projected by our engineers to suit every need and capacity. Our mixers have a significant market share both at home and abroad with the price advantage brought by mass production, short delivery time, quality manufacturing and spare part supply guarantee. Technical details: Lsdpfxszar I Sj Al Isrn  Type: Twinshaft mixer (TWS 01)  Wet concrete capacity: 1 m3  Dimensions (length x width x height): 1700 x 2900 x 2000 mm  Feeding capacity: 1500 lt  Fresh concrete capacity: 1250 lt  Compacted concrete capacity: 1000 lt  Motor power: 2 x 18.5 kW  Hydraulic discharge gate  Automatic lubrication FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), color: other, Year of construction: 2026, The FABO planetary concrete mixer makes mixing operation provides quality homogenised mixes and productions from 0.5m3 to 2m3. It is excellent for smaller demands, precast products, mixing semi-dry coloured concrete, slump precast concrete, fiber reinforced concrete, self-compacting concrete, etc. Lrjdpfszar Irex Al Isn Compacted Concrete Capacity m3 : 2 Loading Capacity m3 : 3 Mixer Power kW : 90 Gearbox = BONFIGLIOLI or equivalent brand Side Body Wearing Plates 10mm ST52 Bottom Wearing Plates 12mm HARDOX 500 Mixing Arm Wearing Plates 20 mm NI-HARD 400 No. of Stars x No of Blade on Each Star = 2X3 Hydraulic Discharge Door AVAILABLE

Condition: refurbished (used), 105m3 horizontal steel tank with heating coil Diameter: 2.80m Lredjxqfwtepfx Al Ion Length: 17.10m

Condition: used, 50 m3 / 50,000 l horizontal steel tank Diameter: 2.50 m Length: 10 m Weight: 16 t The tank is pressurized. Steel thickness: 20 mm / 2 cm Lsdpfx Alextmzxo Isrn Pressure: up to 20 atmospheres Steel cradles (legs) included

Condition: like new (used), Horizontal carbon steel tanks 73.000l Dim. 3x 11m Cyllinder thickness 8mm Bottom thickness 12mm Equipped with a ladder. Lrsdpfxoibh S Hs Al Ion

Condition: excellent (used), SILOMAT for silos FREE FALL type or PRESSURE TYPE. For plastering machine or other use. /dozens of pieces/ We have also for sale about 200 transportable silos (free fall or pressure type). Lsdpfolf Niqox Al Ijrn Sales in Poland (BIESLKO BIALA lub OLSZTYN) or Italy (RIMINI). KNAUF, BAUMIT, PFT, M-TEC, MALTECH, MIXER, PUTZMEISTER, mortar, plaster, cement, silos, silo, silomat, silomats

Condition: excellent (used), Meat grinder Omega 32. Wihout stand 1900 € With stand 2100 € Lsdpfxsx Ndqrj Al Iorn

Condition: new, PRICE: 1900 EUR Spiral dough mixer Container capacity (capacity): 60 liters Spiral mixers are intended for professional use in the field of bakery and catering They are used for the preparation of primary dough, but can also be used for the preparation of other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger quantities of dough continuously They consist of a bowl for ingredients and a mixing tool (spiral) They have a digital control panel with a display, two independent electric motors with two speeds and counter directions that move the vessel and the spiral, as well as a built-in timer Specification of Spiral Mixer single phase Bowl Capacity: 60 liters Lodpfox U Efbex Al Iern Electric Power: 3kW Machine Size: 840x480x1000mm

Condition: used, Used, good condition mixer. Everything works. Reverse. Lodpfx Asxpgx Aol Isrn

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, CONSTMACH planetary concrete mixers enable the production of homogeneous concrete in a short time thanks to their high-performance mixing technology. In planetary mixers, the mixing arms rotate both around their own axis and around the center, ensuring that every part of the mixture is processed evenly. Thanks to this unique design, it is possible to produce concrete with a perfect consistency in as little as 30 seconds after adding water. Planetary mixers stand out from classic twin-shaft mixers with their energy efficiency, cement savings, and superior durability. Planetary Concrete Mixer Technical Specifications MODEL: CPLN - 0.5 Loading Volume: 750 liters Fresh Concrete Volume: 625 liters Compacted Concrete Volume: 500 liters Motor Power: 18.5 kW Lower Wear Plates: 10 mm Hardox 450 Side Body Wear Plates: 8 mm ST 52 Mixing Arm Wear Plates: 25 mm Ni-Hard MODEL: CPLN - 0.75 Loading Capacity: 1000 liters Fresh Concrete Volume: 875 liters Compacted Concrete Volume: 750 liters Engine Power: 30 kW Bottom Wear Plates: 10 mm Hardox 450 Side Body Wear Plates: 8 mm ST 52 Mixing Arm Wear Plates: 25 mm Ni-Hard MODEL: CPLN - 1 Loading Capacity: 1,500 liters Fresh Concrete Capacity: 1,250 liters Compacted Concrete Capacity: 1,000 liters Engine Power: 45 kW Lower Wear Plates: 15 mm Hardox 450 Side Body Wear Plates: 8 mm ST 52 Mixing Arm Wear Plates: 25 mm Ni-Hard MODEL: CPLN - 1.5 Loading Volume: 2,250 liters Fresh Concrete Volume: 2,000 liters Compacted Concrete Volume: 1,500 liters Motor Power: 2 x 30 kW Lower Wear Plates: 10 mm Hardox 450 Side Body Wear Plates: 10 mm ST 52 Lsdpfxexpkfmo Al Iorn Mixing Arm Wear Plates: 25 mm Ni-Hard MODEL: CPLN - 2 Loading Volume: 3,000 liters Fresh Concrete Volume: 2,500 liters Compacted Concrete Volume: 2,000 liters Engine Power: 2 x 37 kW Bottom Wear Plates: 15 mm Hardox 450 Side Body Wear Plates: 12 mm ST 52 Mixing Arm Wear Plates: 30 mm Ni-Hard Why Choose CONSTMACH Planetary Concrete Mixers? CONSTMACH manufactures mixers that deliver maximum performance even under the most demanding production conditions, backed by years of engineering experience. Each model is equipped with high-quality materials and CE-certified motors. Our planetary mixers secure your investment with low maintenance costs, high mixing efficiency, and a long-lasting design. Additionally, optional chrome carbide coatings, additional discharge covers, and different mixing arm options ensure full compliance with your production needs. For professionals seeking durability, efficiency, and technical excellence, CONSTMACH Planetary Concrete Mixers are the smartest investment choice in their class. What Does Constmach Do? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller model: Fanuc MSX-516, rotational speed (max.): 12,000 rpm, The P8 power supply, valued at €1,500, was only replaced in August 2024! Ledpfezcuyiox Al Ijrn The spindle was repaired in 2017 and has mostly only been used for single-layer operation since then! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 600 mm Travel range Z-axis: 650 mm Feed length X-axis: 630 mm Feed length Y-axis: 600 mm Feed length Z-axis: 650 mm Table width: 500 mm Table length: 500 mm Number of pallets: 2 Maximum speed: 12,000 rpm Number of tool magazine slots: 60 (BT40) MACHINE DETAILS Control: Fanuc MSX-516 Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Full load current: 181 A Note: The rapid traverse rate of the X-axis is reduced by 20% to extend the service life of the telescopic guides. The sealing ring during pallet changes is likely defective. The seller temporarily resolved this by inserting a ball valve in between when the pallets needed to be changed. EQUIPMENT Documentation/Manual Chip conveyor

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, center width: 1,500 mm, center height: 250 mm, swing diameter over bed slide: 500 mm, spindle speed (max.): 2,800 rpm, controller model: Monforts Control System MTC K, The machine was overhauled in 2017! The corresponding invoices are available upon request. TECHNICAL DETAILS Swinging diameter over bed: 500 mm Swinging diameter over slide: 290 mm Distance between centers: 1,500 mm Spindle bore: 70 mm Center height: 250 mm Spindle speed: 2 - 2,800 rpm MACHINE DETAILS Control system: Monforts Control System MTC K Control method: Teach-in Dimensions & Weight Dimensions (L x W x H): 3,350 x 1,550 x 1,800 mm Net weight: 3,300 kg Transport packages: 1 EQUIPMENT Fixed steady rest Lrodjzdfzaopfx Al Ien 3-jaw chuck Documentation CE marking

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 308, table width: 850 mm, table length: 1,250 mm, stroke length: 200 mm, pressing force: 42 t, empty load weight: 1,000 kg, TECHNICAL DETAILS Bending capacity: 42 t Max. bending stroke: 200 mm Table length: 1,250 mm Table width: 850 mm Stroke length: 300 mm Stroke width: 200 mm MACHINE DETAILS Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,500 x 2,500 x 1,800 mm Shipping weight: 1,000 kg Shipping packages: 2 units Lrodjzdfb Tspfx Al Ion EQUIPMENT Documentation CE marking

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, spindle speed (max.): 3,500 rpm, travel distance X-axis: 271 mm, travel distance Y-axis: 600 mm, center width: 600 mm, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Turning diameter over bed: 350 mm Ljdpfjzdd Npox Al Isrn Distance between centers: 600 mm Bed width: 210 mm Travel in X-axis: 271 mm Travel in Y-axis: 600 mm Spindle bore: 62 mm Maximum spindle speed: 3,500 rpm MACHINE DETAILS Control system manufacturer: Siemens Power: 30.0 kW Dimensions & Weight Dimensions (L x W x H): 4,300 x 2,100 x 2,100 mm Net weight: 5,000 kg EQUIPMENT Chip conveyor Three-jaw chuck Bar feeder Driven tools C-axis Note: The parameters are stored, but are lost if the power supply is interrupted. As long as the power supply is maintained, this is not a problem.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 44,673 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, controller model: OSP-E100M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 320, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates the bidder to collect the machine on schedule in week 30 of 2026! TECHNICAL DETAILS Ljdpfxszd Tapj Al Ijrn Travel range X-axis: 1,000 mm Travel range Y-axis: 900 mm Travel range Z-axis: 900 mm Spindle speed: 12,000 rpm Tool holder: BT50 Tool positions: 320 Tool positions for 600 mm tools: 80 Part accuracy: 0.001° MACHINE DETAILS Control system: OSP-E100M Number of axes: 4 Coolant pressure: 30 bar Operating hours NC cycle time: 71,235 h Spindle running time: 56,241 h Machining time: 44,673 h EQUIPMENT ATC with 320 positions 80 positions for 600 mm tools 2 pallets Balluff writing/reading system NC table Absolute scales in X, Y, and Z Renishaw MP10 measuring probe Tool breakage monitoring MOP tool monitoring 30-bar coolant system Mayfran Consep 2000 chip conveyor

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 18966, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area, X-axis: 3,309 mm Working area, Y-axis: 1,703 mm Working area, Z-axis: 120 mm Table length: 3,100 mm Lrjdpfx Alszdy S Se Isn Table width: 1,500 mm Number of milling spindles: 1 Number of controlled axes: 3 Tool clamping system: HSK-F63 Tool changer positions: 12 MACHINE DETAILS System/Software: BiesseWorks Capacity: 360 m³/h Connection diameter: 70 mm Vacuum: 300 bar Main motor power: 11 kW Power consumption: 24 A Power: 14.2 kW Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,350 x 2,000 mm Empty weight: 1,530 kg Transport packages: 2 Vacuum pump Busch MM 1322 A VM8 Year of manufacture: 2012 Main motor power: 6 kW EQUIPMENT CE marking CE certificate Documentation (Electrical diagrams, parts list, technical data, user manual (NL, paper form)) Safety fence, safety light curtain Milling table: Flat table Material clamping system: Pneumatic

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: AA1/015406, functionality: fully functional, operating hours: 14,808 h, working width: 1,300 mm, spindle speed (max.): 24,000 rpm, working height: 200 mm, working length: 3,110 mm, No minimum price – guaranteed sale to the highest bidder! The machine is still in operation and can be inspected while powered on. TECHNICAL DETAILS Working area X-axis: 3,110 mm Working area Y-axis: 1,300 mm Working area Z-axis: 200 mm Maximum travel X-axis: 3,500 mm Maximum travel Y-axis: 1,815 mm Maximum travel Z-axis: 440 mm Table length: 3,050 mm Table width: 13 mm Number of milling spindles: 1 Spindle speed: 600 - 24,000 rpm Number of controlled axes: 5 Lsdpfozdy E Ssx Al Iorn Horizontal drilling spindles: 6 Vertical drilling spindles: 12 Tool changer positions: 16 MACHINE DETAILS Main motor power: 11 kW Main motor power of the vacuum pump: 5.5 kW Capacity of the vacuum pump: 250 m³/h Dimensions & Weight Dimensions (L x W x H): 9,000 x 2,450 x 2,850 mm Installed dimensions (L x W x H): 4,600 x 6,500 x 3,400 mm Shipping dimensions: 9,000 x 2,450 x 2,850 mm Empty weight: 4,000 kg Shipping packages: 1 unit Operating hours: 14,808 h EQUIPMENT Milling table: Beam table Tool clamping system: HSK-F63 Material clamping system: Pneumatic Drilling tool Saw unit System/Software: Xilog plus Safety feature: Safety mat Vacuum pump: Becker CNC options: Chip conveyor, Hand control CNC documentation: User key/licenses

Condition: ready for operation (used), operating hours: 41,072 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Travel in X-axis: 630 mm Travel in Y-axis: 560 mm Travel in Z-axis: 560 mm Lrsdpfxezd Aw De Al Isn Spindle speed: 12,000 rpm Feed rate: 20-10,000 mm/min Rapid traverse rate X/Y/Z: 26/26/20 m/min Number of positions in tool changer: 20 Spindle mount: SK 40 Table surface area (L x W): 1,000 x 600 mm MACHINE DETAILS Control system model: Heidenhain TNC 430 Total power consumption: 26 kW Operating hours: 41,072 h Machine weight: approx. 6.5 t EQUIPMENT B-axis (NC milling head) Electric handwheel Chip conveyor Cooling system

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,877 h, functionality: fully functional, machine/vehicle number: NH501CD0388, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 730 mm, controller model: Fanuc MGS-501, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 650 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 730 mm Rapid traverse rate, X-axis: 50 m/min Rapid traverse rate, Y-axis: 50 m/min Rapid traverse rate, Z-axis: 50 m/min Maximum workpiece height: 900 mm Maximum workpiece diameter: 730 mm Lodozcla Hopfx Al Iern Maximum workpiece weight: 500 kg Table dimensions: 500 x 500 mm Table load capacity: 500 kg Maximum spindle speed: 8,000 rpm Distance from table center to spindle nose: 100 mm Number of spindles: 1 Torque: 302 Nm Number of tool positions in the tool magazine: 60 Tool length: 500 mm Tool diameter: 120 mm Tool weight: 30 g Tool holder type for turret 1: ISO 50 MACHINE DETAILS Control system: Fanuc MGS-501 Rated apparent power: 73 kVA Input voltage: 380 V Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,900 x 2,595 x 2,770 mm Total weight: 13,200 kg Operating hours (according to diagram): 28,877 h Power-on time (according to diagram): 94,850 h EQUIPMENT CE marking Documentation/Manual Spindle speed infinitely adjustable Chip conveyor

Condition: used, Year of construction: 1998, 13 spindles at 32mm centres Lrsdpfxjzd Uu Is Al Ien Approx 70mm max boring depth Spindle speed 2800mm 2.5hp motor Manual tilting of boring group from vertical to horizontal [can be locked at 45 degrees]

Condition: used, A used VR Twin Paddle Mixer - tested and working but will need new switchgear for motors with relevant safety interlock connected Video available by request on Whats App Ready to ship worldwide Open to realistic offers Ledpezc Nz Ujfx Al Iern

Condition: used, Used Winkworth approximately 30 litre capacity (product dependant) stainless steel z-blade mixer. Lrjdszfigbspfx Al Isn Weight: Estimated: Kg1000.0