Used Holz-Her Panel Return Systems for sale (50,609)

Condition: used, Year of construction: 2007, Panel dividing saw Manufacturer: HolzHer Type: 6310 CUT 110 Year of manufacture: 2007 Technical data - Cutting length: 4250 mm - Cutting width: 5250 mm / reduced by 2550 mm to 2700 mm - Display on the right - Cut Control control system with touch screen operation - Angle pressing device on the right - Saw carriage with main/scoring saw control - Power: 18.5 kW / 2.2 kW - Manual adjustment of scoring saws in width and height - Grooving device with 2 groove height settings (groove depth adjustable from 2-12 mm, up to max. 9-19 mm) - Label printer TLP2742 - Cut-out device - Additional blowing device on the saw carriage - 3 additional support tables, 2400 mm, with drive system - Control cabinet on the machine side including speed monitoring with safety shutdown - Postforming unit including scoring unit - Automatic central lubrication - Closed pressure beam - Film cutting device Optional, at an extra charge: Extraction system Manufacturer: AL-KO Type: POWER UNIT 300P Year of manufacture: 2011 Technical data - V = 5089 m³/h - Vacuum: 2050 pA - Motor power: 7.5 kW - Suction nozzle 300 mm - 3 collection containers, 250 l each - Integrated extinguishing system Note: Knjdpfx Aozuy Nljkwsc The technical data and descriptions are copies of the original order confirmation. The information is for informational purposes only and is not binding.

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Condition: Guide slightly worn, now only suitable for rough cutting Features and technical specifications: - Cutting length: 4,300 mm - Max. clearance height: 2200 mm Kjdpezk N Hxefx Akwonc - Max. trimming height: 2100 mm - Max. vertical scoring height: 2100 mm - Cutting depth: 80 mm - Motor: 5.5 kW - Saw blade speed: 4,500 rpm - Saw blade diameter: 300 mm - Extraction: 2 x 100 mm - Compressed air consumption: 60 NL/min Dimensions: 5620 x 1480 x 2990 Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2010, Technical details: • Edge material thickness for strip material: 0.4–6 mm • Edge material thickness for coil material (depending on material): 0.4–3 mm • Edge material height: max. 65 mm • Workpiece thickness: 6–60 mm • Minimum workpiece width: 65 mm • Minimum workpiece length: 160 mm • Feed speed: 10 m/min • Integrated control panel on the front side, in the infeed area • Control system: PPC 221 – Power PC • Pull-out workpiece support table, extension: 600 mm • 1801 Pre-milling unit with diamond milling cutter (1 × 0.8 kW, 1 × 1.2 kW, 200 Hz, 12,000 rpm) • 1903 Edge band magazine, pre-cutting up to 3 mm • 1906 MG combined glue application unit (cartridge and granulate) • Pressure regulator for cartridge glue application with pneumatic control • 1912-3 Pressure roller unit • 1918 Pneumatic end-trimming unit • 1827 Multifunctional milling unit (pneumatic control) • 1832 Corner rounding/milling unit • 1929 Scraper unit, R = 2 mm • 1964 Flat scraper Specifications are provided for information only. Kedpfxszxww Ue Akwjnc This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, Year of construction: 2016, Used Machine Year of Manufacture: 2016 Condition: Overhauled by a Holz-Her specialist Features and Technical Specifications: - Base machine with manual pressure bridge adjustment - Extendable workpiece support, distance: 600 mm - FG 201 jointing unit with 2 milling heads, including 70 x 48 x 30 mm Z 2 diameter cutters - Edge feeder 1903, single-feed, automatic transport of roll and strip stock - Glu Jet GJ 301 gluing system with automatic glue height adjustment (probing nozzle) - With magazine for glue cartridges - Pneumatic pressure unit 1912-3; first roll driven with pneumatic immersion control - Trimming unit 1918, pneumatically swiveling 0–10 degrees - Multifunction milling unit 1827 MOT 4 with pneumatic package, including dia. cutters - Profile milling unit 1832 for corner copying with radius cutters - Scraper unit 1929 MOT 2 - Chip collection box - Surface scraper FK 701 - Polishing unit 1940 - New main heater - Minimum workpiece length (mm) 160 - Workpiece thickness (mm) 6–60 Kedpfx Akszk N U Aowonc - Edge thickness (mm) 0.4–6 - Feed speed (m/min) 10 - Overall length (mm) 4930 - Weight (kg) 1420 Availability: available immediately Location: 63934 Röllbach

Condition: used, Year of construction: 2010, machine/vehicle number: 48/1-006 15500889, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, cutting height (max.): 85 mm, cutting width (max.): 4,400 mm, saw blade diameter: 350 mm, overall weight: 5,000 kg, Equipment: scorer, - Holz Her CUT 6120 - heavy-duty precision high-performance panel saw - year of manufacture: 2010 - cutting length: 4400 mm - saw blade projection: 82 mm - control system: CUTCONTROL 2 - label printer - air cushion tables - main saw unit: 11 kW, saw blade diameter 350 mm - scoring unit: 2.2 kW - saw carriage feed: 0 - 100 m/min, stepless - machine dimensions approx. 9730 x 6450 x 1650 mm - machine has been professionally dismantled and securely stored - trouble-free loading with forklift (included in the price) Knedpsy D Hb Nofx Akwec - location: Líšťany 33035, Czech Republic (approx. 50 km from the German border / Waidhaus)

Condition: used, machine/vehicle number: 006200, Max. panel width: 800 mm Max. panel length: 2000 mm Length of conveyor: 5700 mm Knedpfx Aey Nkxiokwsc Introduction system: with grippers

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, The machine is in excellent condition. There is a possibility to test it. Automatic size adjustment and forward feed. Knedpfx Akjztwtlewjc

Condition: excellent (used), Year of construction: 2010, Used machine in top condition – training machine – Year of manufacture: 2010 Digital display in Y Equipment and technical data Cutting length: 3300 mm Cutting height: 2200 mm (edge trimming height 2110 mm) Cutting depth: max. 60 mm Extraction: - Saw unit 120 mm - Lath grid 100 mm Workpiece support: - Sturdy plastic support for optimal stability, even for narrow workpieces. Tilting roller transport system: Manual for easy and material-friendly transport Locking: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Knedpozzfr Ejfx Akwoc Circular saw blade: Diameter: 250 mm Saw motor: 4 kW at 5450 rpm, 400 V, 50 Hz Folding guide rail: incl. workpiece support for narrow parts with strip stop Dust extraction system in accordance with BG guidelines TRK (below 2 mg of fine dust / m³ of air) Availability: immediate Location: 54634 Bitburg - immediately available -

Condition: used, Holz Her Auriga 1308 XL Black Edition compact design – edge thickness 0.4 – 8 mm SPS screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor Pre-milling unit for attaching before the gluing section Edge magazine fully automatic for coil and strip material Glue application station GLU JET cartridges + PU gluing Fully automatic operation of the units via NC servo axes Workpiece height 6-60 mm Automatic glue height adjustment High-gloss package Pressure unit pneumatically controlled Cutting unit pneumatically controlled for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of the cutting saw angle from 0-10° Milling unit MOT4, flush milling 8 mm, radius milling - chamfer milling via NC axes Shaping milling unit – rounding of edges up to edge thickness 3mm in a single pass via NC axes Knsdpfjznuncsx Akwoc Scraping blade unit MOT for chamfers and radii with 2 scraping blade holders via NC axes Surface scraping blade unit – finishing Buffing unit – polishing Spray system in the infeed and outfeed area complete DIA tool set included First delivery in 2018 Machine in TOP CONDITION from a lease return available from stock in Lieboch

Condition: new, HOLZ-HER 7405 EVOLUTION CONNECT machining center -Exhibition machine- Ksdpszq Dbdofx Akwenc This offer includes an equipment package. The following items and options are already included in the price: - Material support - Height-adjustable infeed roller conveyor - Diamond edge trimming cutter set EVOLUTION - CAMPUS V8 EVOLUTION CAD/CAM software - Flat screen monitor, 21.5", 16:9 - Laser workpiece length measurement - Milling head 7830 - Tool changer 7887, 6-position magazine, pick-up - Vacuum system ECO - Air conditioning unit for control cabinet cooling - Tool changer 7874 - Angular gearbox 7869 - Adapter for Clamex cutter - Tool set - 4-axis CLAMEX - Tool holder HSK-F 63 - Drilling unit XL 7885, 19 spindles - Handheld control unit - Tool set - EVOLUTION for XL drilling head 7885 - New exhibition machine -

Condition: used, Year of construction: 2019, Holz-Her Dynestic 7532 10.5 automatic CNC nesting machining center with Holz-Her Store-Master 5110 panel storage system Used machine Year of manufacture: 2019 Features and Technical Specifications: - Designed for classic nesting machining with a wear plate - Welded machine frame with ground and hardened prismatic guides for the traveling column, toolhead, and consoles - Gantry-style moving column - Rack-and-pinion drive, helical teeth, in the X and Y directions; ball screws in the Z direction for precise positioning - Machining dimensions: - Max. support area on nesting table: X = 3100 mm Y = 1560 mm - Max. travel ranges: X = 4695 mm Y = 2100 mm Z = 293 mm - Max. clearance height of DYNESTIC table Z = 100 mm from top edge of table (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC table: - Rigid, continuous machining table with grid markings - continuous slots in the X and Y directions - Slot spacing: 50 mm - Includes 25 meters of sealing cord for securing the wear plate - Vacuum fields: 1-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - individually controllable - U-shaped arrangement - 5 in the X direction and 4 in the Y direction - 32 mm pitch - Max. drill bit diameter: 35 mm - Total drill length: 70 mm from the mounting end (depending on plate thickness) - Spindle extension stroke: 70 mm - Rotation direction: Alternating clockwise and counterclockwise - n(max): 1,000–4,400 rpm, continuously adjustable - Mounting: M10 thread – 11 mm interference fit - Tool-free, without mounting - 6 horizontal spindles: - 2 dual-spindle units in the X direction - 1 dual-spindle unit in the Y direction - Mounting: M 10 thread, 11 mm interference fit - Total drill length: max. 63 mm from mounting end - Tool-free, without chuck - Milling unit 7842: - Power: 12.0 kW (S6) - n(max) = 1,000–24,000 rpm, continuously variable - Max. power at 12,000 rpm to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck with HSK shank - Ceramic ball bearings (hybrid bearings) - Max. tool weight: 6 kg (including holder) - Tools: Milling and grinding tools, max. Ø 160 mm - Safety guarding in accordance with CE standards - Protective guard on the sides and rear - Vacuum pump: 500 m³/h, dry-running - Operator safety via light curtains in the front area of the machine - Handheld control unit for remote control of the machine with the following functions: - Start/Stop of the machining program - Speed control of the machining cycles - Reset button - Manual feed/rapid traverse for all axes - Emergency stop - CAMPUS V7 CAD/CAM software (1 machine license) consisting of: - CAMPUS NC-HOPS: - Graphical variant system with WOP and CAD/CAM features for creating Kjdpfxozlbrpo Akwsnc part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic centralized lubrication - Automatic lubrication according to defined lubrication intervals - Additional dust sealing via positive pressure in each guide carriage - Simultaneous lubrication: - for all linear guides in the X, Y, and Z directions - for all ball screws in the Y and Z directions - for all milling s...

Condition: used, Holz Her Sprint 1329 Multi Heavy-duty version - Edge thickness 0.4 - 8 mm (15 mm with tool change) Edge Control 19 control system, 18.5" touchscreen color display 16:9 ECO mode - energy-saving mode fa.s.t. setting technology "Tool change in the gap" iTronic - adaptive pressure and adhesive application control and cleaning routine Motorized, position-controlled bridge height adjustment Long infeed guide rail, motorized, controlled via PLC Pre-milling unit for attachment before the gluing station Edge magazine, fully automatic for coil and strip material Gluing unit GLU-JET GJ301 automatic, cartridge system - granulate + PU adhesive, thin-film technology Edge height max. 65 mm Pressure unit DW 501, motorized-pneumatic, NC servo axis Cutting unit for coil and strip material up to 15 mm edge thickness With electro-pneumatic adjustment for 0-10° bevel of the cutting saw Multi-function milling unit MOT6 – 6 NC control axes, including air blow nozzles Flush trimming 8 mm (15 mm) Radius trimming Chamfer trimming 45° Copy milling unit MOT 6 Multi, corner copying, postforming corners with 6 NC control axes, for milling the upper and lower longitudinal edge and copy milling the front and rear end face, vertical edge, working height 60 mm with shelving program, including air blow nozzles Scraping unit MOT6 Multi, including air blow nozzles and chip scraper Kedjz Rl Tmjpfx Akwsnc Surface scraping unit - finishing with pre- and post-scanning, including air blow nozzles Buffing unit for final polishing and edge polishing with 2 textile discs, swiveling 5° Spray device for infeed and outfeed area as well as antistatic agent and lubricant at the pressure unit Infeed area - electronically controlled release agent spray device Before the pressure unit - electronically controlled antistatic spray device After the pressure unit - electronically controlled lubricant spray device Outfeed area - electronically controlled cleaning agent spray device with cleaning agent First delivery 2022, very few running meters, from a craft business Machine is WORKSHOP INSPECTED in TOP CONDITION / Leasing possible Ex works

Condition: used, Year of construction: 1996, Used Machine Features and Technical Specifications: - Automatic edge magazine for rolls up to 3 mm; manual feed for strips up to 13 mm - Trimming shears for up to 3 mm - Cartridge-type adhesive application system - 3-roller pressure unit - 2-motor trimming unit - Multifunction routing unit (flush, radius, chamfer) - Radius scraper - Corner copying unit Kjdpo Aa A I Sjfx Akwsnc - Surface scraper - Buffing unit - Edge banding thickness: 0.4–13 mm (with tool change) - PVC edges up to 3 mm - Edge banding height: max. 51 mm - Edge banding length: min. 200 mm - Edge banding overhang per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Workpiece thickness: min./max. 6/45 mm - Feed rate: 11 m/min. - Dimensions: 4500 x 1020 x 1630 mm - Distance from wall: 400 mm New gluing station installed in 2015

Year of construction: 2016, condition: good (used), For inquiries: Zoltán Utasi +36 30 205 7380 Kedewkf Twopfx Akwonc • Edging thickness coiled edging: 0,4 - 3 mm • Edging thickness of cut-length edging: o max. 3 mm with unit FF701 o max. 8 mm without unit FF701 o max. 15 mm possible through tool change at trimming unit • Edge height: max. 65 mm • Workpiece thickness: 8 - 60 mm • Workpiece width: min. 65 mm • Workpiece length: min. 160 mm • Feed speed: variable 10 - 18 m/min LUMINA 1380 Ltronic Motor-driven pressure bridge adjustment Automatic lubrication of the transport chain Preparation RETURN-connection Electric for variable feed 400 V / 50 Hz, 2.2 kW Operation Edge Control 19 with 18,5" Touchscreen ECO MODE power-saving mode Pre-milling unit 1802 with 2 milling units Edge feeder MG701 SYNCHRO automatic transport of roll and strip products Ltronic LT702 NIR+ Laser Edging Unit Glue application system Glu Jet GJ302 automatic motorized, automatic adjustment of gluing height (tracing nozzle) (EVA, PUR) Glu Jet rinse hopper Change carriage GJ302 Change carriage LT702 Pressure section 1913 MOT: first roller driven, 2 support pressure rollers Sprayer unit after pressure unit with use of antistatic coolant End trimming unit1918 (60 mm) pneumatic Form trimming unit FR701: Play-free mechanism and 6 fully digital NC servo-axes ensure Form trimming unit FF701: Play-free mechanism and 4 fully digital NC servo-axes ensure 100% repetition accuracy at the touch of a button. Scraper unit 1929 MOT4 with motor-driven adjustment for sensing rollers Surface glue scraper FK701 With pre and post tracing device for scraping out superfluous glue on the complete panel length for a clean glue line. Sprayer unit1856 for the in- and outfeed area Buffing unit 1940 For edge cleaning and polishing

Condition: excellent (used), HOLZ-HER EVOLUTION 7405 machining center - used Throughfeed processing, 4-sided profiling possible, integrated vacuum pump, automatic vacuum positioning, hardened, dust-protected prism guides, ball screw spindles on all axes, network card for remote maintenance, integrated control cabinet, control cabinet cooling with heat exchanger, handheld control unit, XL drilling head, saw unit for grooving in the X direction, pick-up tool changer, central lubrication system, automatic ----- Technical Data ----- min. workpiece length X: 200 mm, min. workpiece length Y: 70 mm, min. workpiece thickness: 8 mm, max. workpiece length X: 3,200 mm, max. workpiece length Y: 920 mm, max. workpiece thickness: 70 mm, machine control software: CAMPUS HOPS, main spindle motor power: 6.5 kW, main spindle speed: 1,000 - 18,000 rpm, Knjdpfxoyrp Srs Akwec main spindle mounting: HSK-F63, drilling unit motor power: 1.7 kW, drilling spindle mounting: M10, interference fit 11 mm, number of vertical drilling spindles: 13 pcs., no. of horizontal double drilling spindles in X direction: 2 pcs., no. of horizontal double drilling spindles in Y direction: 1 pc., saw blade diameter of saw unit: 120 mm, number of tools in tool changer: 6 pcs., extraction connection diameter: 2 x 120 mm + 1 x 140 mm, required volume flow: 4,100 m³/h, required static negative pressure: 2,500 - 3,000 Pa, required air velocity: 30 m/s, compressed air connection: 6 bar, compressed air consumption: 300 l/min. Quality information: - complete basic cleaning - electrical system checked - pneumatics checked - adjusted according to manufacturer's specifications - ready for immediate use

Condition: excellent (used), functionality: fully functional, Holz Her Auriga 1308 XL FÜ + PU compact design - edge thickness 0.4 - 8 mm SPS-based Edge-Control PPC 231 touchscreen control system motor-driven, position-controlled bridge height adjustment pre-milling unit for attachment before the gluing section fully automatic edge magazine for roll and strip material GLU JET cartridge gluing station + PU gluing glue application via nozzle technology workpiece height 6-60 mm automatic glue height adjustment pressure unit 1912-3, pneumatic trimming unit 1918, pneumatic, for roll and strip material up to 8 mm edge thickness with pneumatic adjustment for 0-10° bevel of the trimming saw milling unit 1827 MOT 4, flush trimming 8 mm, radius milling - bevel milling - 15° MOT NC axes controlled via control panel profile milling unit 1832 pneumatic, rounding of corners up to edge thickness 3 mm in a single pass scraper blade unit 1929 MOT2 for bevels and radii with 2 scraper blade holders, NC axes controlled via control panel surface scraper blade unit - finishing buffing unit - polishing spraying system at the infeed and outfeed complete tool equipment included first delivery 2013 Kodozib Niopfx Akwonc machine is FUNCTIONALLY TESTED and in TOP CONDITION available from warehouse Lieboch

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Condition: Functionally tested Equipment: Base machine Extendable boom Joint milling unit 1801 Edge feed system, fully automatic 1903 Glujet 201 adhesive application system, cartridge Printing unit 1912-3, pneumatic Cutting unit 1918 Combination milling unit FR201 Pulling blade unit 1929 Chip collection box Surface pulling blade 1964 Knodpfozu T Sgsx Akwoc Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Knedpsvvkfdefx Akwoc

Condition: used, Used machine Equipment and technical specifications: Automatic edge feeder Cartridge glue system 4-roll printing unit Cross-cut saw unit Flush trimming unit Combination trimming unit: flush/bevel/radius Radius scraper Buffing unit Kodpfxow Nad Hj Akwenc Edge band thickness 0.3 - 20 mm (depending on unit) Edge band height max. 66 mm Edge band length min. 200 mm Feed rate 8/16 or 12/24 m/min With LIGMATECH workpiece return system The return line of this return system is located above the panel processing level. The workpieces move back to the operator on an inclined plane. Special features compared to the ZHR 0x models: Automatic detection and rotation of parts from transverse to longitudinal Automatic adjustment of the rotation speed to the workpiece length Minimum and maximum workpiece dimensions For longitudinal edge processing: 2200 x 1000 For transverse processing with subsequent rotation: 250 x 120/2200 x 800 Maximum workpiece thickness: 60 mm Location: Bavaria Availability: Short-term

Condition: excellent (used), Cutting height: 210 cm Cutting length: 500 cm Knjdpfx Akezi Dm Rswoc Cutting depth: 60 mm Engine: 4 kW Overall dimensions: Length 600 cm, Height 300 cm, Width 160 cm

Condition: excellent (used), Equipment: CE marking, documentation/manual, saw blade guard, scorer, Very well-maintained Cut 85, including Barbaric infeed system, cutting length 3200 mm. The system will be dismantled at the end of October. Knsdez Ad I Ispfx Akwsc

Condition: used, Year of construction: 2014, Feed direction of the panel: to the right from the operator Maximum edge thickness: 3 mm Minimum workpiece thickness: 8 mm Maximum workpiece thickness: 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Feed speed: 10 m/min Jointing unit: Yes, with 2 milling units Jointing tool: Diamond cutters Diameter: 70 mm Height: 48 mm Infeed fence adjustment: manual Chopping shear up to: 3 mm Single edge feeding: possible Gluing: GlueJet PU gluing: possible Cross-cut saw: Yes Combination unit for flush/bevel/radius: pneumatically adjustable Corner rounding unit: pneumatically adjustable Profile scraper: yes Flat scraper: yes Aggregate display: on the display Control type: via limit switches Operation: Control panel with buttons Transport device: No Extendable roller support: Yes Protective hood: Yes Working height or feed table height: 874 mm Weight approx.: 1400 kg Extraction diameter: 160 mm Kjdpfx Aozq E Hbekwsnc Storage location:

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Cutting length: 3100 mm Cutting depth: 3100 mm Main saw blade unit, diameter: 300 mm Scoring saw blade unit, diameter: 180 mm 3 front tables with air cushion system Pushing carriage with 5 clamps Control: CutControl 2 Kjdpoztzaiefx Akwenc With OPTI-BASE software for cutting optimization and software for printing labels Label printer

Condition: excellent (used), Year of construction: 2019, I sell the fully equipped edge banding machine Holz-Her Streamer 1057 XL, year 2019: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable Clue scrapers pneumatic adjustable Cleaning brushes top + bottom Knsdpfx Akszr Rwhjwjc Cleaning fluid spray front + back Control panel Working thickness adjustment manually Material height 8-60mm Edge thickness 0,4-8mm Feeding speed 10m/min. Total length including feeding plate 4200mm Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: used, Holz Her Auriga 1308 XL POWER Compact design - edge thickness 0.4 - 8 mm Kjdoznucyjpfx Akwsnc Motorized bridge adjustment PLC screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor iTronic adaptive pressure and adhesive quantity control, and flushing routine fa.s.t. setting technology "Tool change in position" Long infeed guide with motorized adjustment Pre-milling unit for application before the gluing section Fully automatic edge magazine for coil and strip material Glue application station GLU JET cartridges + PU adhesive, with sensing nozzle Workpiece height 8-60 mm High-gloss package Pressure unit, pneumatically controlled Trimming unit, pneumatically controlled for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of 0-10° bevel of the trimming saw Multi-function milling unit FR301 MOT6, flush trimming 8 mm, radius milling – chamfer milling 15° via NC axes Profile milling unit FF301 MOT1 – rounding of corners up to edge thickness 3 mm or alternatively chamfer = 45°, working height 12 – 60 mm, postforming possible Scraping unit ZK301 MOT4, for chamfers and radii with 2 scraping blade carriers via NC axes Surface scraping unit FK701 with pre- and post-sensing - finishing Buffing unit - polishing Spray system in the infeed and outfeed area Spray system with lubricant for high-gloss edges Complete DIA tool set included First delivery 2022 Machine in TOP condition, taken out of service - small business Available from stock, Lieboch