Used Helm 1505 for sale (137)

Condition: used, Wilhelm Stehle 2/24 milling cutter sharpener Gbsdjzhuddepfx Ahmor

Condition: good (used), Year of construction: 1987, functionality: fully functional, pressing force: 25 t, table width: 360 mm, table length: 560 mm, throat depth: 180 mm, total length: 1,680 mm, total width: 950 mm, total height: 2,000 mm, overall weight: 1,750 kg, ram adjustment: 60 mm, Projection 180 mm Gbsdpfot Sgruox Ahmjr Smallest distance between press bed and ram at maximum stroke at bottom, Ram adjustment at bottom 50 mm Largest distance between press bed and ram at maximum stroke top, ram adjustment top 340 mm Fold-through hole in table 150 x 100 mm Table adjustment 150 mm Ram stroke 12-80 mm

Condition: used, Die-cutting machine – Swivel frame die-cutting machine – Flatbed die-cutting machine – Toggle press – Eccentric press Die-cutting machine + feeder for use with strip-type die-cutting tools Flatbed die-cutting machine HELMERDING, type PSH 25 Item no. EP 97784, Machine no. 6073, Year of manufacture 1998 Pressing force 25 tons Distance between tie rods 700 mm Table area = installation space 800 x 670 mm Table area = installation frame, width 510 x depth 440 mm, plate thickness 20 mm Punch area 800 x 670 mm Through-hole in the table 490 x 420 mm Punch stroke 45 mm Gedpfxedzqmzo Ahmebr Punch adjustment distance 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min Motor power 15 kW Mains connection 400 volts, 50 Hz - controlled drive for stepless stroke rate adjustment - pneumatic clutch-brake combination - punch equalizing cylinder - automatic central lubrication system VOGEL - massive base plate with 4 vibration damping elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons Good condition Previously, the machine was used for die-cutting cardboard sheets. Ideal for die-cutting non-woven fabrics or similar materials for respiratory masks.

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Machine No. 5917 Year of manufacture: 1993 Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Gbjdpfx Ajyath Tohmsr Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Table height above floor: 630 - 780 mm Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Good condition

Year of construction: 2008, condition: used, pressure 315 t stroke 40-200 mm no. of strokes 20-100 Hub/min ram - range of adjustment 120 mm ram surface 2000x1100 mm table surface area 2000x1200 mm hole in the table 1700x250 mm 500 mm column travel -side 820x650 mm total power requirement 45 kW Gbjderdi Dlopfx Ahmjr weight of the machine ca. 44 t

Year of construction: 1985, condition: used, pressure 110 t throat 295 mm stroke 20-120 mm no. of strokes 60/90 Hub/min ram - range of adjustment 85 mm table surface area 920x580 mm Gbedpfxolp U Rvo Ahmor ram surface 540x280 mm hole in the table 300x180 mm table height 830 mm tool hole in ram Ø 50 mm weight of the machine ca. 5,1 t dimensions of the machine ca. BxTxH 1500x2000x2500 mm

Year of construction: 1987, condition: used, pressure 150 t throat 350 mm stroke 20-120 mm no. of strokes 50 / 75 Hub/min Godpfx Ahjp Apxhjmobr ram - range of adjustment 85 mm table surface area 1150x670 mm ram surface 800x380 mm hole in the table 330x200 mm table height 800 mm tool hole in ram Ø 50 mm weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 2000x2000x2700 mm

Condition: used, Year of construction: 1986, pressure 35 t throat 240 mm stroke 12-84 mm no. of strokes 135 Hub/min ram - range of adjustment 70 mm table surface area 600x450 mm ram surface 360x180 mm hole in the table 220x130 mm table height 630 mm tool hole in ram Ø35 mm weight of the machine ca. 2,5 t Gedpoxh Sx Ejfx Ahmsbr dimensions of the machine ca. BxTxH 1500x2000x2600 mm

Condition: used, Year of construction: 1988, functionality: fully functional, Press capacity 5,000 kN Table area 2,400 mm x 1,700 mm Ram area 2,400 mm x 1,400 mm Adjustable stroke 25 mm - 200 mm Ram adjustment max. 200 mm Stroke rate 20 - 100 spm Drive power 84 kW Machine weight approx. 62,500 kg with roller feeder/straightener combination + decoiler Further data and photos available on request Gbodpfx Aoyg Emzohmjr

Condition: used, Year of construction: 1980, Pressing force 1,100 kN Adjustable stroke 20 - 120 mm Ram adjustment max. 85 mm Strokes per minute 35 / 70 1/min Gsdpsyg Ecpefx Ahmebr Machine weight approx. 5,100 kg Further data and images available on request

Condition: used, Year of construction: 1984, Press force 1,500 kN Adjustable stroke 20 - 120 mm Ram adjustment max. 85 mm Stroke rate 50 / 75 1/min. Gedpfxsyg Ebxe Ahmsbr Machine weight approx. 8,000 kg Further data and images available on request

Condition: excellent (used), Siemens side channel blower vacuum pump Gbjdpfxev Irgmj Ahmsr

Condition: used, machine/vehicle number: 423. 1245102, 4-strand flyer with reversing beam Gedpfxjylzlke Ahmebr Wire diameter: 0.05 to 1.0 mm 2-strand flyer with reversing beam Winding diameter: 90 mm, traverse width: 120 mm Max. wire diameter: 1.0 mm

Year of construction: 1997, condition: ready for operation (used), A complete punching line with Helmerding eccentric press is available. 1) Eccentric press Helmerding KDH 100, year of manufacture: 1997, power: 11kW, pressing force 30° before and after: 100t, stroke adjustment: 8mm-110mm, ram adjustment: 80mm, stroke rate: 40-140 strokes/min, length: 2100mm, width: 1500mm, weight: approx. 12000kg. 2) Kohler 1000.1 reel, year of manufacture: 1983, power: 1kW, load capacity: 1000kg, length: 1500mm, width: 1100mm. 3) Straightener Kötje RM-7-300-60, year of manufacture: 1998, power: 3kW, max. strip width: 300mm, straightening roller diameter: 60mm, number of straightening rollers: 7, length: 1400mm, width: 1200mm. 4) Roller feed Kötje EWV 80-50-S, year of manufacture: 1998, power: 4kW, length: 750mm, width: 700mm. Documentation available. On-site inspection is possible. Gbsdpfxsvnd Sno Ahmor

Year of construction: 1981, condition: ready for operation (used), Travel X/Y/Z: 495mm/205mm/355mm, table clamping surface: 1060mm, spindle bore: 46mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 4300mm/2100mm/1750mm, weight: approx. 1900kg. Only with counter bearing for arbor mandrels, key, and hobbing arbors. The machine shows bearing noise and play on the X-axis. Documentation available. An on-site inspection is possible. Godew Edptopfx Ahmjbr

Condition: new, Year of construction: 2005, functionality: fully functional, power: 6,200 kW (8,429.64 HP), rotational speed (max.): 744 rpm, input voltage: 6,000 V, input frequency: 50 Hz, input current: 678 A, type of input current: three-phase, overall weight: 22,000 kg, total length: 3,800 mm, total width: 2,850 mm, total height: 2,800 mm, type of cooling: water, protection type (IP code): IP55, 1 unused spare 3-phase electric motor from clearance stock. Manufacturer: Helmke Type: DWK 900-08-037 Power: 6200 kW Speed: 744 rpm Direction of rotation: Clockwise Voltage: 6000 volts Current: 678 amps Protection class: IP55 Insulation class: F Cos. f: 0.91 Frequency: 50 Hz Cooling: Water Bearings: Insulated sleeve bearings Length: 3800 mm Width: 2850 mm Height: 2800 mm Shaft height: 1000 mm Shaft diameter: 240 mm Shaft length: 350 mm Godpfx Ahewliu Uemjbr Weight: 22000 kg

Year of construction: 2026, condition: new, Continuous pasteurizer electric - up to 400 ltr./h * Water bath boiler * Electric heating 13.5 / 18 / 27 / 31.5 kW - 400 V * Container (stainless steel) 150 ltr. with thermal insulation * Stainless steel tubular heat exchanger * Automatic low temperature safety device (compressed air required) * Stainless steel juice pump * Chassis with holder for low temperature safety device and pump Gsdpfx Ast Uzitehmebr ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2026, condition: new, Coaxial tubular heat exchanger for connection to an existing heating system / heat source * Coaxial tubular heat exchanger (KRWT) with thermal insulation * Automatic low temperature protection * Stainless steel juice pump * Chassis Advantages: * Low maintenance * Suitable for media containing turbid matter * Simple, quick cleaning * Durable thanks to the use of high-quality and robust components Gbsdpjt Uzhcjfx Ahmjr Optional: Mixing unit incl. circulation pump for a stable inlet temperature of the heating water ##### RINK - Pasteurizing systems for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2026, condition: new, Continuous pasteurizer electric with preheating of the juice in the coaxial tube heat exchanger They use available low-cost energy (e.g. from solar, heat pump, biogas, tec.) although the temperature level is not sufficient for pasteurization. The rest of the temperature increase to pasteurization level is done electrically (with less energy requirement). The components: Preheating: * Coaxial tubular heat exchanger (KRWT) with thermal insulation (max. 60kW) thermal * Mixing unit incl. circulation pump ensures a stable inlet temperature of the heating water Continuous pasteurizer electric: * Electric heater 13.5 / 18 / 27 / 31.5 kW - 400 V * Tank (stainless steel) 150 ltr. with thermal insulation with stainless steel tubular heat exchanger * Automatic low temperature safety device (compressed air required) * Stainless steel juice pump Pasteurizer mounted on chassis Simple operation Total capacity up to 1100 liters per hour Gedeuadm Dopfx Ahmjbr ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2026, condition: new, A modular system that you can easily adapt to your needs: * Mechanical or electric grinder * Packing press or basket press * Fruit presses in various sizes: 5 - 70 liters All home cideries offer: * Highest juice yield through hydraulics * Ergonomic and hygienic operation * Compact unit with mobile frame RINK - home cideries - :according to your needs: Gbjdpfx Ahouady Dsmor * The Standard home cider makers include a manual fruit grinder and enable an hourly output of up to approx. 70 liters. * The Super home cider mills include a RINK scraper mill and enable an hourly output of up to approx. 150 liters.

Year of construction: 2026, condition: new, Instantaneous water heater with tubular heat exchanger directly in the boiler water * Low space requirement and low weight * Energy savings of up to 10%! * low maintenance * easy to clean * Optimum price/performance ratio * Optionally with oil or gas burner Technical data: * Boiler output 100 kW * Hourly output up to 1,350 liters (10-78 °C) Gbodpfet Hfygex Ahmjr * Dimensions (H/W/D) approx. 160 x 110 x 160 cm * Empty weight approx. 320 kg ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Condition: new, Year of construction: 2026, EF 600-NG bag-in-box dosing machine - for filling fruit juices, wine, vinegar, oil, etc. * High-quality stainless steel housing * Clear display with important information (current flow rate, remaining quantity, etc.) * preset quantities 1.5, 3, 5, 10, 20 liters * freely adjustable quantities * Cleaning program * Extensive statistics * Only short downtime due to double holder Gsdpfx Ahet U Iiysmebr * Compact design

Year of construction: 2026, condition: new, Instantaneous water heater with tubular heat exchanger directly in the boiler water * Low space requirement and low weight Godot Hfyaepfx Ahmobr * Energy savings of up to 10%! * low maintenance * easy to clean * Optimum price/performance ratio * Optionally with oil or gas burner Technical data: * Boiler output 80 kW * Hourly output up to 1,100 liters (10-78 °C) * Dimensions (H/W/D) approx. 160 x 110 x 160 cm * Unladen weight approx. 280 kg ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2026, condition: new, Instantaneous water heater with tubular heat exchanger directly in the boiler water * Low space requirement and low weight * Energy savings of up to 10%! * low maintenance * easy to clean Gbjdpfst Eui Isx Ahmor * Optimum price/performance ratio * Optionally with oil or gas burner Technical data: * Boiler output 40 kW * Hourly output up to 550 liters (10-78 °C) * Dimensions (H/W/D) approx. 140 x 100 x 115 cm * Empty weight approx. 190 kg ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2026, condition: new, Instantaneous water heater with tubular heat exchanger directly in the boiler water * Low space requirement and low weight Godpfjt Hfx Aex Ahmsbr * Energy savings of up to 10%! * low maintenance * easy to clean * Optimum price/performance ratio * Optionally with oil or gas burner Technical data: * Boiler output 60 kW * Hourly output up to 850 liters (10-78 °C) * Dimensions (H/W/D) approx. 160 x 110 x 140 cm * Empty weight approx. 230 kg ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use