Used Haas Dt-2 for sale (78,036)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 25 h, functionality: fully functional, Equipment: rotational speed infinitely variable, Crusher Equipment Including: Special tools, reinforced, 7/7 tool carriers with 4 tools each (tools consist of main, pre-crushing, and post-crushing blades) Shaft speed individually and infinitely adjustable, approx. 0–41 rpm Including post-crushing bar Including tilting skip Drive Unit Drive power: 294 kW Including Scania diesel engine, Stage 5 Including standard noise reduction package Including Power RAM pre-cleaner Including central lubrication for the 4 main bearings Including Cleanfix Including swiveling cooler Electrics / Controls Including IFM display Including radio remote control Including four shredding programs (wood, waste, special, and green waste) Discharge Conveyor Including discharge conveyor Custom Equipment Including preliminary armoring of tools Including overband magnet, hydraulically height adjustable – neodymium – Including hopper extension on 3 sides, approx. 800 mm each Including electric pump for hydraulic oil Gijdpfx Ahsu Hgllepsu Including GPS module Including rubber tracks Including pressure sensors Including additional noise-reducing cassette (-10 dB(A)) Refurbishment / Service Refurbishment and service by HAAS

Condition: repair required (used), Year of construction: 2013, functionality: not functional, machine/vehicle number: 1106086, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table width: 356 mm, table length: 914 mm, The machine's tool changer is defective. The repair costs for this are approximately €8,000 - €10,000. The axis wear corresponds to the typical wear for a machine of this year of manufacture. TECHNICAL DETAILS Travel Paths X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table Length: 914 mm Width: 356 mm Max. table load: 680 kg Spindle Spindle taper: SK-40 Spindle drive: 22.4 kW Speed: 12,000 rpm Tool Changer Tool changer: 24+1 magazine positions Feed Rates Rapid traverse: 35.6 m/min MACHINE DETAILS Gisdow Axkyspfx Ahpeu Electrical Data Voltage: 360–480 V Phases: 3 Frequency: 50/60 Hz Full load current: 40 A Maximum load: 70 A Short-circuit interrupting capacity: 10,000 A Short-circuit current: 5,000 A RMS symmetric Operating Dimensions Max. operating height: 2,667 mm Max. operating width: 3,175 mm Max. operating depth: 2,769 mm EQUIPMENT Key switch for program lock Synchronized thread tapping 208-liter coolant system with continuous coolant supply 15" color LCD monitor with USB port

Year of construction: 2007, condition: ready for operation (used), Length: 2600mm, width: 1700mm, height: 1800mm, connected load: approx. 12.5kW, on-site inspection is possible. Godpfeq N A I Rsx Ahpjiu

Condition: good (used), Year of construction: 2011, functionality: fully functional, The machine is in good technical condition, testing can be arranged by prior agreement. Giedoyq Ipgepfx Ahpsu

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 40164, controller manufacturer: HAAS/FANUC, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS Spindle speed: 12,000 rpm Giodpfx Ahjxuih Repou MACHINE DETAILS Control: HAAS/FANUC Electrical data Voltage: 360/480 V Phases: 3 Frequency: 50/60 Hz Full load: 40 A Maximum load: 70 A EQUIPMENT 24-position tool changer BT40 Belt filter system / high-pressure pump KNOLL KF 150

Condition: used, Model: David 200 Dehairing And Flaming Machine Slaughter performance approx. 40-50 pigs/hour Pigs up to approx. 270 kg Machine body in hot-dip galvanized or stainless steel design Built-in control cabinet Roller equipped with 36 special clubs Electrical power: 5.5kW Installation dimensions of the machine in cm: Width: 240 Giedpjtq T Tkjfx Ahpou Length: 340 Height: 250

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, machine/vehicle number: SN3128158, turning diameter over cross slide: 533 mm, turning length: 572 mm, spindle bore: 63 mm, spindle speed (max.): 4,000 rpm, New condition + tooling + bar fender Gjdpjvwz T Usfx Ahpeiu

Condition: new, We would like to offer shafts dedicated for HAAS 2000XL, 1500, and TEREX TDS 820 machines, equipped with side combs and a breaking bar. -4-7-7 -4-9-9 PROTECHNIKA is a company with 21 years of history and from the very outset has specialized in the production of spare parts and complete recycling lines. In recent years, we have expanded our product portfolio to include the manufacturing of grinding shafts for slow-speed shredders. Through the implementation of automated welding processes and proprietary production technologies, we have significantly reduced lead times while maintaining consistently high quality. Grinding shafts are a series product, which, among other things, enables us to collaborate with machine manufacturers as an OEM supplier. Gedpfex Hhuisx Ahpoiu What distinguishes PROTECHNIKA from the competition? It's simple! - Certified 3.1 materials - TUV SUD Rheinland-certified quality - ISO 9001 - Automated welding process / ISO 15613 / ISO 15614 compliant - Welders certified to ISO 9606-1 - ISO 9001:2015 - ISO 14001 - In-house design department capable of meeting any customer requirements - Our own RESEARCH AND DEVELOPMENT CENTER Customer relations are of paramount importance to us, as their satisfaction is our success!

Condition: ready for operation (used), Year of construction: 2011, VF - 2YT Year 2010 & 2011 Godsx Hc Uqopfx Ahpoiu Travels S.A.E METRIC X Axis 30.00 in 762 mm Y Axis 20.00 in 508 mm Z Axis 20.00 in 508 mm Spindle Nose to Table (~ max) 24.0 in 610 mm Spindle Nose to Table (~ min) 4.0 in 102 mm Spindle S.A.E METRIC Max Rating 30.0 hp 22.4 kW Max Speed 10,000rpm Taper BT40 ATC 24 Bearing Lubrication Air / Oil Injection Air / Oil Injection Cooling Liquid Cooled Liquid Cooled c/w RT-160 and RT-160-2 Rotary Table c/w Tool measuring system 2 units

Condition: used, volt / V ampere / A weight / kg total power requirement / kW Giedozcq E Uspfx Ahpsu

Condition: ready for operation (used), TRUMPF 200 MQ VIS focusing optic + Haas - Laser NBB 22-30-20-00 SN:9061842, used, normal signs of wear, 100% functional, delivery scope as shown in the photos. Giodsx Eu Uyspfx Ahpou

Condition: ready for operation (used), Volland Telemetry MICRODAS B1 Type: BW 2, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Giodpfx Ahoxaigdepju

Condition: ready for operation (used), Heldt & Rossi Series 806 (807/2) DC servo amplifier type 500-75, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Gisdpfxji Ea D Ee Ahpou

Condition: new, Year of construction: 2025, Rotating Blade Snow Plow CP 2 * Snow plow with lifting mechanism * Adapter group for mounting plate size 3 * CP 2 combination scraper blades 36 (set) Hydraulics * CP hydraulic adapter group (lift/lower/adjust) * ISO 16028 (S) (size 12 / BG3) - 2 ports Accessories Godjw I Uayspfx Ahpeiu * Side deflectors left/right * Snow dust guard * Warning markings * LED lighting Other information: * Trade-in and purchase of vehicles and machines possible. * Sales price excludes transport. * No liability for printing & typographical errors. * Subject to error, changes, and prior sale. * Offer is non-binding. * Photos may differ. Price applies to the current condition. * All information provided without guarantee. Further Information Installation: Snow blade

Condition: good (used), load capacity: 2,000 kg, 3-axis welding positioner, 2-ton load capacity, in good condition Incl. hand remote control (foot control available on request) Gsdpfx Ahjxxvabspoiu Inclination and rotation speed continuously adjustable 0.05 - 1.0 rpm Clamping plate diameter: 1.0 meter Height tilted to center min. approx. 0.7 m, horizontal 0.9 m Height tilted to center max. 1.6 m, horizontal 1.8 m Length 2.2 m, width 1.35 m

Condition: excellent (used), Year of construction: 2008, 300 Kg load capacity welding rotary table, with hollow shaft diameter 125mm with jaw chuck 320mm or 400mm very robust speed infinitely variable from 0,15 to 5,0 rpm current transmission 350 A diameter rotary table 400mm inclination up to 135 height horizontal 835mm, tilted to center approx. 735mm Gjdpfxjlamtbo Ahpeiu length 850 mm x width 580 mm

Condition: excellent (used), Year of construction: 2005, overall weight: 6,000 kg, total height: 310 mm, total length: 3,985 mm, total width: 2,010 mm, Floorplate Length: 3985mm Floorplate Width: 2010mm Height: 310mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Weight a plate approx.: 6000kg Number of matching pieces: 2 Length: 3985mm Width: 2010mm Gisdpfx Asyg Hx Eshpsu Height: 310mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2007, x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm Control Sinumerik 840 D Siemens distance between columns max. 3.000 mm passage max. 1.950 mm distance spindle center to table max. 1.800 mm distance spindle nose and table 1.350 / 1.500 mm type P 8005020/00-4 turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 20 kW max. Torque 48 Nm tool taper HSK-A63 DIN 69063 Spindle Extension 450 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° type P 8002320/00-4 turning speed range - main spindle 20 - 5.000 min/-1 power capacity - main spindel 40 kW max. Torque 1.100 Nm tool taper HSK-A100 DIN 69063 Spindle Extension 300 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° table surface area 4.000 x 2.200 (2x) mm max. table load 12 / 20 t height over floor 700 mm number of T-slots 11 + 19 T-slot - width 28H7 mm T-slot - distance 200 mm number of toolpositions 327 pos. number of toolpositions HSK A63: 156 pos. number of toolpositions HSK A100: 171 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 / 500 mm max. tool weight HSK A63: 5,0 kg max. tool diameter HSK A100: 315 mm max. tool length HSK A100: 500 / 800 mm Gedpevy Ihdsfx Ahpjiu max. tool weight HSK A100: 40,0 kg feed speeds X: max. 30.000 mm/min feed speeds Y/Z: max. 40.000 mm/min feed speeds B: 3.600 °/min feed speeds C: 2.160 °/min Accelaration X: max. 1,5 m/s² Accelaration Y/Z: max. 3,2 m/s² x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm b-axis +110° / -10 ° c-axis +/- 200 ° total power requirement 150 kVA dimensions of the machine ca. 25,0 x 12,0 x 7,0 m 5-Axis Gantry-Big-Machining-Center DROOP + REIN - TFS 22 40 DT D40 P - two Milling-Heads - ca. 4.000 Power On Hours - X-Achse 10.000mm (coupled) / 2x 5.000mm (single-table) - 3 axes simultaneously (X, Y, Z) - 2 positioning axes (B, C) - tools upon request

Condition: used, Year of construction: 2006, Technical details: Gedpfxeu Nkx Ie Ahpoiu table load: 2,2 t table diameter: 2500 mm Total power requirement: 9,6 kW max. table load: 22.000 daN / 2200kg table rotating: links/rechts Grad table - inclinable: 0 - 120 Grad table height: 1700 mm machine weight approx.: 12000 kg connected load: ca. 5,0 kVA dimensions LxWxH: ca. 4,5 x 2,5 x 2,3 m Welding positioning turn-tilt table developed and manufactured by Müller Opladen ARC KON EWeding GmbH. Machine frame solid, welded steel construction with ball-bearing tilting device Table with centering grooves and T-slots for M24 according to DIN 650. Infinitely variable rotary drive from 0.05 - 1.0 rpm. Height to center of swivel axis 1700 mm hydr. tilt adjustment, infinitely variable from 0 - 120° Drive is designed for a torque of approx. 40,000 Nm at the turntable Accessories: 1x 2-row foot switch 1x remote control 1x working platform *

Condition: used, mileage: 781,309 km, power: 390 kW (530.25 HP), first registration: 03/2022, fuel type: diesel, number of seats: 89, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, Year of construction: 2022, Equipment: ABS, air conditioning, cruise control, = Other Options and Accessories = Giedpfxoxf A Tzj Ahpsu - DVD - Air conditioning - Front refrigerator - Sleeper cab - Toilet - USB connections - Webasto heater = Further Information = Height: 400 cm Damages: none = Company Information = We are an international company based in Belgium, located near Brussels (approximately 20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, offering a large parking area that serves as a showroom. We always have a wide selection of buses of all makes, capacities, models, and in every price range in stock. We can help you find the right tourist, school, or city bus tailored to your needs or budget. All information is provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Bus inspection visiting hours: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: used, 1 SEW-Eurodrive gearbox motor 1 Flender/Himmel 3Mot-L 40 Gjdpfezcf Ausx Ahpoiu

Year of construction: 2004, condition: ready for operation (used), Infeed width: 660mm, equipment: pallet feeder PD-66-T, Tremat sheet separation system, six folding plates in the parallel folding section, downstream knife shaft, two folding knives in the cross-fold section, one additional folding plate after the 1st cross fold and pressing station with standing sheet delivery SB-46/MP.D. The system is technically without problems, rollers need to be replaced. An on-site inspection is possible. Gsdpfx Ahsy Ull Ijpjiu

Condition: used, functionality: fully functional, Lanico DT 265 Automatic can seamer 153 mm complete Giodpfjxupn Rjx Ahpsu

Condition: used, maximum load weight: 6,420 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 07/1990, loading space length: 8,400 mm, total width: 2,500 mm, total height: 3,900 mm, Due to the large number of unreliable emails, not all emails will be answered. WhatsApp: available Gjdox Dgdnepfx Ahpjiu German trailer / German vehicle registration document Leaf-spring suspension Overall length: 10250 Loading area: approx. 8.4 m "ERRORS, TYPOS, AND PRIOR SALE EXCLUDED"

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 3,800 h, load capacity: 230 kg, lifting height: 21,000 mm, fuel type: diesel, Truck AERIAL PLATFORM Cela DT 21 Year 2011 Working height 21 m Horizontal outreach 10 m Basket capacity 200 kg Hook capacity 230 kg Hours 3.800 Gsdpezcvhbsfx Ahpsiu km 78.800 Lifting hook Automatic stabilization Checked and fully functional