Used Expert Systemtechnik Gmbh Wasserstrahlschneider & Verklebestation for sale (70,953)

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. Nlsdpfxey Urtfj An Ied All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 4803, type of input current: AC, overall weight: 2,200 kg, total width: 2,600 mm, total length: 2,600 mm, total height: 2,300 mm, input voltage: 400 V, power: 5.5 kW (7.48 HP), input frequency: 50 Hz, A nearly new GKM KTS 2600 DS with less than 500 operating hours. This is a tumbling screen machine with a patented adjustment for the three-dimensional movement, allowing the dwell time for each product on the screens to be individually adjusted. The main shaft is driven by an electric motor and V-belt. Technical data: • Tumbling screen machine with a 2600 mm diameter and 5 screen decks • Inlet DN 300, outlet DN 300, stainless steel Nledozl U Uwopfx An Iod • Screen lifter for easy removal • Approximately 4000 silicon balls for screen cleaning for difficult materials • Motor 5.5 kW, 400 VAC, 50 Hz • ATEX EXII-/3D Ex h IIIB T155°C design – Zone 20 inside, Zone 22 outside • Outlets are individually adjustable and adaptable • Installed screen sizes: 2 mm, 1 mm, 0.56 mm, 0.4 mm, 0.32 mm • Spare screens: 0.63 mm, 0.71 mm, 1.5 mm The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging on a pallet.

Year of construction: 2019, operating hours: 3,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10031325, This is a high-resolution NIR system capable of detecting particles in the 3 mm size range. Additionally, the machine is equipped with an electromagnetic detector that has a sensitivity of approximately 1.5 to 1 mm, depending on the metal type. Depending on the settings, it can sort positively or negatively. Technical data: Nledozl Uzwjpfx An Isd Belt width: 1024 mm Nozzle bar: 6.4 mm working width Upon request, complete documentation can be provided. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Year of construction: 2020, operating hours: 2,500 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 26858, A complete set is available for sale. The set consists of the following units: Pellet press 33-390 – the dimensions can be found in the accompanying documentation. The throughput rate is up to 500 kg/h – depending on the material and material density. Drive motor 30 kW. The die has a size of 3.0 mm. Spare parts: 4 dies and 2 rollers Conveying system: Z-conveyor – bucket conveyor, track width 298 mm from Wiese Förderlelemte in cooperation with Amandus Kahl. 3400 mm horizontal at the bottom, 5300 mm vertical, and then 2340 mm horizontal. Dimension sheet included. Material cooler (Pos. 1): is a cylinder with a fan that blows ambient air into the cone, volume approx. 1 m³. Pellet sieve (Pos. 2) / screener manufactured by Gough Engineering for separation of fines, oversized pellets, and product classification. Screen size 3.2 mm. Control cabinet: is included. The basic control system (without power electronics) is manufactured by Kahl and complies with CE regulations at the time of manufacture. The power unit is manufactured in Israel and may not comply with CE regulations. Both control cabinets will be supplied; commissioning and compliance with all regulations are the responsibility of the seller. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered ex-works at a port or at the production plant in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet. Njdpfozl Tlzsx An Isld

Condition: used, functionality: fully functional, The separation is achieved through repeated fractionation on up to 5 longitudinally arranged, superimposed sieve decks, the inclination of which increases downwards. The sieve frame is driven by unbalanced motors. The installed sieve decks have the following sizes: 15-10-5-3-1 mm. Nsdpozl Sv Ssfx An Ield The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,100 kg, rotor diameter: 700 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,400 rpm, power: 90 kW (122.37 HP), Equipment: rotational speed infinitely variable, This shredding machine is exceptional and highly innovative. The material to be processed is shredded particle by particle in 6 rows of small chambers, while simultaneously the particles are flung against the grinding surface. The combined effect results in a very fine grain size – and it is possible to dry the material being shredded at the same time. Keywords: Turbo mill, impact mill, eddy current mill. Nodpfx Anszl Shze Ield Depending on the material, the machine can shred to a particle size of less than 1000 µm to 5 µm. The throughput rate is between 100 and 900 kg/h, depending on the material. The applications range from minerals, industrial products, powder coatings, chemicals, dyes to food and feed. The innovations of the machine are: • the plug-in connections for the wear tools (always in the same place with minimal tolerances) • rotation in both directions – this ensures that the tools are worn down evenly on both sides • conical design – allows the cutting gap to be adjusted precisely to 0.1 mm with only 12 screws. Technical data: • Drive power 90 kW – frequency converter (FU) is essential – frame size 90 kW with 150% overload for 60 seconds. • Speed up to 125 m/s • Tools: Rotor and stator made of hard metal, available in various degrees of hardness; ceramics are also possible. • Machine monitoring via bearing temperature measurement and vibration measurement included. • Control panel is not included. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe.

Condition: excellent (used), Year of construction: 2016, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 565697, type of input current: three-phase, input voltage: 400 V, belt width: 600 mm, conveyor belt width: 600 mm, The Wagner non-ferrous metal separator (NE separator), model 0429 from Wagner Magnete, is one of the manufacturer’s high-performance eddy current separators. Working width: 600 mm. • Throughput: depends on the material and grain size. • Rotor speed: up to 3,000 revolutions per minute. • Belt speed: 0.5 to 2.0 m/s. • Weight: 1.2 tons. • Rotor system: Eccentrically mounted with a high pole-changing frequency. • Rotor drive: 4 kW; belt drive: 1.5 kW. The machine and the associated control panel are included in the delivery. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or in the production facility. The details for optimal transport need to be clarified. The machine price is quoted without packaging on a pallet. Nedpfx Anszl Rfxj Isld

Condition: good (used), Year of construction: 2014, machine/vehicle number: 412, space requirement width: 1,500 mm, space requirement length: 3,300 mm, space requirement height: 2,500 mm, Ultrafiltration system with accessories for the treatment of soil washing wastewater Year of construction 2014, fully functional until dismantling Documentation, operating instructions, E-plans are available. 7 packages; Filtration tank single 1520mm diameter Filtration system with control 330cm x 150cm x 220cm Nodpfeqzx Dbjx An Ield 5 extra Euro pallets with accessories

Condition: excellent (used), functionality: fully functional, REF: MM5465 1 x Seitz-Werke GmbH filling machine for bottles. Fed by counter-pressure tank. Manufacturer - Seitz-Werke GmbH Njdex A A I Hopfx An Ijld Model - SF 12. Date of manufacture - 1961 (has been refurbished since). Speed - up to 1200 bph (depending on filling volume). Capacity - variable filling range (whatever bottle size fits into holders). Overall dimensions - 1100mm diameter x 2350mm H. Last used in March 2023.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: HAW07.5-2-22-T96, overall weight: 100 kg, total length: 600 mm, total width: 400 mm, total height: 900 mm, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, power: 7.5 kW (10.20 HP), operating pressure: 250 bar, Equipment: hydraulics, Hydraulic power packs from 1.1 to 22 KW output ⦁ Drive type electric motor - petrol engine - diesel engine or PTO driven ⦁ Hydraulic oil tank 36L - 96L - 144L - 250L or according to customer requirements ⦁ Hydraulic pump Gear pumps or axial piston pumps ⦁ Additional components such as valves and control technology ⦁ Tank size 36L - 96L - 144L - 250L or according to customer requirements (customer drawing) Nsdpfx Aet U Uiasn Ield

Condition: new, functionality: fully functional, rope length: 30,000 mm, rope speed: 47,000 mm/min, machine/vehicle number: HAW1700-EV-Funk, Hydraulic winch for wood splitters, cranes, mini excavators, tractors, agricultural vehicles, viticulture, horticulture, and many other applications. The hydraulic attachment winch simplifies many tasks: - Pulling and positioning firewood to the wood splitter - Pulling logs onto trailers - Removing tree stumps and roots - As an attachment winch on forestry cranes and small excavators - As a winch for small tractors and narrow-gauge tractors A robust steel construction with 3-sided mounting options (left, right, rear) and 12 threaded holes offers many possibilities for attaching the winch (threads are cut and painted. They need to be re-cut with a thread tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is mounted. A large cable pulley ensures a long service life for the steel cable. We mount hydraulic motors from 50 to 630 cc (standard = 400 cc), depending on the speed and pulling force required. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Nsdpodf Ufpefx An Iold Displacement: 400 cc Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version includes an electric hydraulic valve, remote control, and hoses to the motor. Article number: HAW1700-EV-Funk

Condition: good (used), Year of construction: 2000, Weber Assembly Table / Joining Station Heavy-duty industrial assembly table / joining station from the quality manufacturer WEBER Konstruktion Maschinenbau GmbH. The machine features an extremely robust mechanical design and is ideally suited for production facilities, workshops, or as a perfect base for a modernization project. Technical specifications (according to nameplate): Manufacturer: WEBER Konstruktion Maschinenbau GmbH (Aschaffenburg) Type: Assembly table Machine No.: BA 659 00 Year of manufacture: 08/2000 Electrical connection: 380 V (CEE plug included) Pneumatic connection: 6 bar "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Nedpszni Rxofx An Iold You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 2010, RHV-C&V GmbH & Co. KG glass jar capper type: LW560 Nljdpjyxgxwefx An Iod serial number: 10172/4184 year of construction: 09/2010 stainless steel conveyor belt, belt width: 120 mm

Condition: good (used), Year of construction: 1999, Esta Spänesog-SB 8151 Chip Extractor High-performance industrial extraction system from the quality manufacturer ESTA, model Spänesog-SB 8151. The unit is ideally suited for workshops for the extraction of chips and dust (e.g., in metal or wood processing). Technical specifications Manufacturer: ESTA Apparatebau GmbH & Co. KG Model / Type: Spänesog-SB 8151 Voltage (Volts): 400 V Nlsdpfx Asznibwon Ijd Power (kW): 2.2 kW Current (Amperes): 4.6 A Frequency (Hz): 50 Hz Protection class: IP 54 (dust and splash-proof) You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: new, Bee GTE-88/090/-08-V17-F pneumatic ball valve, 24V DC coil voltage, unused, 100% functional, scope of delivery as shown in the photos. Nlodpfx Aoi D T Iyon Ijd

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: MINVAP VPXpert K 10c, Manufacturer: Grabner Instruments Messtechnik GmbH - Type: MINVAP VPXpert K 10c - Year of manufacture: 2017 - Technical data: Nedjxt H Hhopfx An Iold > Measured temperature range: 0 to 120°C (user programmable) > Temperature stability: ±0.01°C > Temperature profiles: single temperature, stepped, or ramp mode > Pressure range: 0 to 1000 kPa (0 to 145 psi) > Pressure resolution: 0.1 kPa > Pressure tolerance: 0.1 kPa > Vapor-liquid ratio: 0.02/1 to 100/1, adjustable per selected method > Power requirement: 90-264 V AC, 45-63 Hz, 200W (mains supply) > Field application DC/AC power converter: 12V / 200W > Dimensions (W x H x D): 253 x 368 x 277 mm (10 x 14.5 x 10.9 in) > Weight: 9 kg (20 lb) > Precision data: > Repeatability: ±0.3 kPa (0.04 psi) > Reproducibility: ±0.7 kPa (0.10 psi)

Condition: good (used), functionality: fully functional, Year of construction: 2021, 3 units of driverless transport systems, SAFELOG. AGV M4 – used: Price per unit: €12,500.00 (net)! Manufacturer: SAFELOG GmbH Type: AGV M4 Njdpfszpf Rwex An Iold Year of manufacture: 2021 Includes inductive charging station and wireless station Manufacturer data: Forward and reverse travel possible Wear-free charging during the process using an inductive charging system Scalable battery capacity with LiFePo4 batteries to adapt to process requirements Flat design with only 220 mm height – ideal for driving under 7” touch display for easy operation Agent-based control for communication between AGVs and their environment Electric lifting pin for automatic pickup and release of trailers up to 1.5 t Travel speeds from 0.02 m/s to 1.6 m/s Hybrid navigation consisting of magnetic track, contour navigation, camera navigation, and odometry Safety laser scanner in each direction of travel Technical data Designation SAFELOG AGV M4 Article number 106148 Electrical data Operating voltage AGV [V] 24 DC Charging time with inductive charging system (with 1 / 2 / 3 / 4 batteries) [min] 30 / 40 / 60 / 80 * Capacity (with 1 / 2 / 3 / 4 batteries) [Ah] 21 / 42 / 63 / 84 Operation Temperature operating range [°C] 5 - 35 Positioning accuracy [mm] + / - 5 * Min. turning radius [m] 1 Maximum speed (with trailer/without trailer) [m/s] 1.0 * / 1.6 * Continuous operating time without load (with 1 / 2 / 3 / 4 batteries) [h] 4 / 8 / 12 / 16 * Mechanical data Housing material Steel Dimensions (L / W / H) [mm] 1460 / 450 / 220 Weight AGV [kg] 235 Max. payload AGV (top load) [kg] 200 * Max. towing weight (trailer) [kg] 1500 * Condition: good Available: immediately Location: Erfurt area, later warehouse Frankenberg / Saxony

Condition: excellent (used), Weiss Spray Water Test Unit Type: SWT 600/800-S Manufacturer: Weiss Umwelttechnik GmbH For sale is a professional spray water test unit from the manufacturer Weiss Umwelttechnik. The unit is used to perform standardized water, spray water, and ingress protection tests according to IPX1, IPX2, IPX3, IPX4, IPX4K, and IPX9K. Ideal for industry, automotive, electronics, quality assurance, development, testing laboratories, as well as research and material testing. Operation is via an integrated touch control panel. Test sequences can be automated. Unit Manufacturer: Weiss Umwelttechnik GmbH Type: SWT 600/800-S Spray Water Test Unit Test types: IPX1 IPX2 IPX3 IPX4 IPX4K IPX9K Stainless steel test chamber Rotating test table Swivel arm system Water circulation Existing test accessories Electrical data Supply voltage: 3/N/PE AC 400 V ±10 % Frequency: 50 Hz Rated power: 17 kW Rated current: 30 A Wiring diagram no.: 82962 CE marking available Water supply Water inlet: R 3/4" Water outlet: R 1 1/4" Supply pressure: approx. 2 to 6 bar Test pressure IPX9K: approx. 80 to 100 bar adjustable Technical data Turntable speed: approx. 1 to 5 rpm Swivel speed: approx. 60°/s Permissible ambient temperature: approx. 10 °C to 35 °C Noise level: approx. 88 dB(A) Heat dissipation to the environment: Average approx. 1 kW Maximum approx. 3.5 kW Equipment Nlsdpfx Aezachcjn Ied Touch control panel Stainless steel test chamber Rotating test table Swivel arm Water circulation pump Nozzle ring / spray ring High-pressure unit Flow meter ESD earth bonding point CE marking Robust industrial design Dimensions / Weight Test chamber SWT 600/800: approx. 2,350 x 2,400 x 2,650 mm Test chamber without hinges and door locking: approx. 2,350 x 2,400 x 1,850 mm Weight of test chamber: approx. 650 kg Dimensions of high-pressure unit: approx. 850 x 1,200 x 800 mm Weight of high-pressure unit: approx. 380 kg Total weight: approx. 1,030 kg Documents Operating manual EC declaration of conformity Quality test certificate Technical documentation as shown in the pictures Accessories Nozzle ring / spray ring Test and spray components Swivel arm accessories Flow meter Connection components Tools and keys Documentation Condition Used unit from industrial use. Visual condition see pictures. The unit can be switched on. Display and user interface are functional and visible. Further technical testing, calibration or complete functional testing has not been carried out. Inspection and testing on site possible and desired after prior appointment. Scope of supply Weiss Umwelttechnik SWT 600/800-S spray water test unit High-pressure unit Turntable and swivel arm Test and spray accessories as shown in the pictures Operating manual and documentation Accessories as shown in the pictures The table shown in the photos is not included in the scope of supply. Loading possible by arrangement. Transport and shipping by a suitable freight forwarder required. Dimensions, weights and technical data partially taken from documents. Information may vary. Commercial sale without warranty. Subject to change, errors and prior sale.

Condition: used, Cryogenic gas tank semi-trailer CRYOBASE used for liquid oxygen, nitrogen and argon Capacity: 24 m³ Date of first registration: 29.09.2025 Nedpfx Anjznb Nye Ijld Pump, flow meter, vaporizer, vacuum insulation. New technical inspection (HU), vacuum and leak test. We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane. We will be glad to answer your questions via Phone and E-mail

Condition: like new (used), functionality: fully functional, tank capacity: 120 l, Equipment: CE marking, Autoclave – Kettle type Korimat KA 160 / 2.5, including 2 x insert basket 1/3. Nledpfezpd Ihsx An Ijd Power 9 kW, voltage 3 x 400 V / 50 Hz. Machine completely made of stainless steel. Condition – Like new!!!

Year of construction: 2008, condition: good (used), This extruder line from Kuhne is in machine storage at Plastima Used Machinery. The machine is from 2008 and in excellent condition. Njdeyxn T Njpfx An Ijld Brand: Kuhne GmbH Model: K 60E - 33D Screw type: single screw Year of construction: 2008 Screw diameter Ø: 600 mm L/D ratio: 33 Cylinder height: 425 mm Cone height: 325 mm Total height: 750 mm

Year of construction: 2021, condition: good (used), Styrofoam press / compact screw compactor for EPS (Styrofoam®) and XPS, EPS packaging or production waste, Heger – used: Price ex works: only €9,950 (net)! Manufacturer: Heger GmbH, Herrenberg Type: Tiger 130 T Year of manufacture: 2021 3x400V, former new price: EUR 15,000 Throughput 1) up to 15 kg/h Achievable compression 1) up to 250 kg/m³ Nledpfx Anezk Da Hs Isd Processable material densities up to 30 g/l Processable molded part height up to 300 mm Effective feed opening (W x D) 700 x 360 mm Block size 130 x 130 mm Installation dimensions (L x W x H) 2,824 x 440 x 1,602 mm Machine weight 310 kg Electrical connection power 1.5 kW Supply voltage (EU) 3 x 230 V 50 Hz 3 x 400 V 50 Hz Supply voltage (USA) 3 x 230 V 60 Hz 3 x 480 V 60 Hz CE marking Condition: good – very good, little use Available: immediately Location: 25813 Husum

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 110362L0 / 110363L0, PKM Packaging GmbH / KOCH Pac-Systeme GmbH – Fully Automatic Pharmaceutical Packaging Line For sale is a high-quality, fully automatic packaging line from PKM Packaging GmbH / KOCH Pac-Systeme GmbH (year of manufacture 2012) for pharmaceutical, medical device, diagnostic, healthcare, and cosmetic products. The line consists of two interconnected machine modules and handles the complete secondary packaging process – from the automatic erecting of folding cartons, product insertion and grouping, to closing, labeling, marking, check weighing, and rejecting defective packages. Equipment: Automatic carton erector Collation packer Carton closer Mettler Toledo Garvens XS3 checkweigher (7–700 g / 0.1 g) BLUHM label printing and dispensing system Wolke m600 inkjet marking system Camera and inspection systems Modern touch panel operation PLC control with recipe management, user management, and fault diagnosis Servo drive technology with EtherCAT Complete protective enclosure with safety monitoring Technical data Manufacturer: PKM Packaging GmbH / KOCH Pac-Systeme GmbH Year of manufacture: 2012 Machine numbers: 110362L0 / 110363L0 Operating voltage: 400 V AC Frequency: 50 Hz Connected load: 6 kW + 3 kW Compressed air: 6 bar Enclosure protection class: IP44 Last used packaging formats The system was last used for the folding carton sizes shown in the appendix. The attached die drawings show the last used carton blanks and formats. Conversion to other folding carton formats is possible, depending on the packaging size and product design. Original investment value Garvens checkweigher (Mettler Toledo) – €27,695.00 KOCH carton packaging system VM0059 – €794,497.34 PKM carton packaging system VM0059 – €266,061.66 Other components and integration Total investment of the packaging line: approx. €1,351,161.00 Scope of delivery complete packaging line Carton erector Collation packer Carton closer Nedpfx Anjzmp Tqe Ield Conveyor and roller conveyors Checkweigher Labeling and marking systems Camera and inspection technology Control cabinets technical documentation including electrical diagrams, pneumatic diagrams, drawings and parts lists The system is in very good condition and is currently installed in a pharmaceutical plant. Inspections are possible by appointment. We will gladly send functional videos, technical documents, information on disassembly, packaging, and worldwide shipping upon request.

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 19 l, color: orange, operation weight: 2,000 kg, lifting height: 3,570 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.04 m³, digging bucket width: 485 mm, Year of construction: 2026, operating hours: 5 h, Equipment: adjustable boom, adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, Available immediately – get in and get started right away! 🔥 SUMMER PROMOTION – SPECIAL PRICE ONLY €14,199 net plus VAT 🔥 Are you looking for a reliable, modern, and immediately operational mini excavator in the 2.0-ton class? The LT-20 PRO from Tec-Point GmbH impresses with its powerful performance, high-quality workmanship, and maximum comfort – perfect for construction, landscaping, and municipal work. Thanks to its compact design and modern load-sensing hydraulics, this machine is ideal for tight construction sites and yet powerful enough for demanding earthmoving and foundation work. The enclosed cabin with heating makes the LT-20 PRO a true all-year-round professional machine! ⭐ Your advantages at a glance ✅ Side-swinging boom – ideal for tight working areas ✅ Telescopic undercarriage 990–1,300 mm – maximum stability ✅ Load-sensing hydraulics – precise and energy-saving control ✅ Axial piston pump with variable displacement ✅ Travel motors with high/low speed ✅ Double cast counterweights – more stability ✅ Robust 230 mm rubber tracks – durable and wear-resistant ✅ Hydraulic quick coupler included ⚙️ TECHNICAL DATA Operating weight: 2,000 kg Transport weight: 1,820 kg Engine: Kubota D902 | 3-cylinder diesel Power: 11.8 kW Max. operating pressure: 23 MPa Bucket volume: 0.04 m³ Digging depth: up to 2,270 mm Digging reach: up to 3,910 mm Travel speed: 2.2 / 4.5 km/h Gradeability: 30° COMFORT & EQUIPMENT ✔ Enclosed comfort cabin incl. heating ✔ Ergonomic joystick control ✔ LED work lights ✔ Radio ✔ Comfort seat for long working hours ✔ Dozer blade ✔ Hydraulic safety valves ✔ Reinforced steel construction for maximum load capacity INCLUDED IN THE SET: 3 BUCKETS + HYDRAULIC QUICK COUPLER The scope of delivery includes: ✅ 25 cm ditching bucket ✅ 50 cm deep-digging bucket ✅ 100 cm grading bucket ✅ Hydraulic quick coupler ➡️ Immediately ready for any construction site! ➕ OPTIONAL – AVAILABLE AT AN ADDITIONAL CHARGE Hydraulic tilt quick coupler with tilting function Hydraulic earth auger set up to Ø 300 mm Hydraulic hammer SERVICE & GUARANTEE 12 months warranty throughout Europe Spare parts & service directly from the warehouse in Rheda-Wiedenbrück IMMEDIATELY AVAILABLE + DELIVERY POSSIBLE Europe-wide delivery possible on request. Location: Rheda-Wiedenbrück Our machines are immediately available and ready for use. You are welcome to inspect and test all our machines directly at our premises. 🔥Only available until the end of the month: LT-20 PRO including hydraulic quick coupler at the summer price of €14,999 net🔥 Secure this advantage now – the offer is only valid for a limited time! Inquire now & secure your advantage! Demand is high – secure your LT-20 PRO now. ➡️ Write to us directly via Maschinensucher or call us – we will be happy to advise you personally! Njdpox Hg D Ajfx An Iold

Condition: new, Year of construction: 2025, functionality: fully functional, The LMH-3000 is a state-of-the-art, next-generation 4-in-1 fiber laser welding machine. It combines welding, cutting, brazing, and surface processing in a single system. Building on the proven LMH-1500, the LMH-3000 offers even greater performance and flexibility with its 3,000 W laser source – ideal for working with thicker materials and demanding applications. Thanks to its energy-efficient fiber laser, stable cooling, and ergonomic handheld operation, this machine is perfectly suited for continuous industrial 24/7 use. Technical Data Model: LMH-3000 (4-in-1) Nodpfx Anoxc Ec Ts Isld Laser source: 3,000 W (Raycus / MaxPhotonics – depending on configuration) Laser type: Fiber laser Functions: Welding, cutting, brazing, surface processing Operating mode: Continuous operation possible Cooling system: Integrated water cooling Materials: Stainless steel, carbon steel, aluminum, copper, galvanized sheet metal, and more Energy efficiency: Up to 80% savings compared to conventional methods Operation: Ergonomic handheld torch with optional wire feeder Advantages - 4-in-1 functionality – versatile applications - Higher output (3,000 W) for maximum welding speed and material thickness - CE-compliant in accordance with Machinery Directive 2006/42/EC and relevant EU standards - Clean weld seams with minimal reworking - Robust design for industrial use - Flexible use in metal construction, production, and maintenance Special Notes Immediately available from stock in Rheda-Wiedenbrück (Germany) Demonstration/Testing: Machines can be tested and demonstrated at our facility at any time – see the quality for yourself. Initial Training: Operating and application training can be arranged by appointment. Extras & Accessories - Wire feeder system - Shielding gas solutions - Replacement nozzles and wear parts - Extras & accessories (optional) Replacement nozzles and wear parts—Ideal for workshops, mechanical engineering, metalworking, body shops, or maintenance departments. 🔒 Certified & Safe: CE certificate including risk assessment in accordance with EU guidelines. Delivery includes all required documentation. 📍 Manufacturer / Supplier: TEC-POINT GmbH Kupferstraße 10, 33378 Rheda-Wiedenbrück, Germany 🚚 Shipping & Invoice: Shipped by freight carrier (on pallets) within Germany and the EU – shipping costs on request. 🧾 Invoice issued with VAT shown separately. ✅ Buy now and have it delivered ready for immediate use!