Used Elu Mgs 73 for sale (1,708)

Condition: good (used), gear motor, electric motor, electric gear motor -Manufacturer: Cebeha, gear motor type CB 73/4/2P -Speed: 83/166 rpm -Engine: 5.5/7.5 kW -Shaft: Ø 60 x 70 mm -Protection class: P33 -Total dimensions: 740/400/H445 mm Nedpfxev Avgms Abkowh -Weight: 166 kg

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder, compensating cylinder Nedpfev Tik Hsx Abkowh -Hydraulic cylinder: tie rod cylinder stroke 73 mm -Type: unfortunately without type designation -Piston rod: Ø 16 mm / M12 -Dimensions: 225/70/H90 mm -Weight: 3.3 kg

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier, slide guide -Tool slide: Support slide lower part support carrier Nsdewcw S Njpfx Abkowh -Dovetail: 90 to 73 mm 12 mm high -Dimensions: see photos -Quantity: 5x bottoms available -Price: per piece -Dimensions: 210/180/H25 mm -Weight: 4 kg/piece

Condition: good (used), Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: RF43 DT90S4/TH i=19.15 -Speed: 73 rpm Nwodpfepu Itqjx Abkjh -Power: 1.1 kW -Design: B5 -Shaft: Ø 25 x 50 mm -Protection class: IP 54 -Dimensions: 500/200/H110 mm -Weight: 25 kg

Condition: good (used), Geared motor, electric motor, three-phase motor, right-angle gear motor -Speed: 32 rpm -Power: 0.6 kW -Design: B3 -Shaft diameter: Ø 38 mm -Protection class: IP 44 Nedec Nt Rdopfx Abkowh -Dimensions: 500/250/H280 mm -Weight: 41 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders Nodpov N Eidjfx Abkjwh -Hydraulic cylinder: double-acting stroke mm -Piston rod: Ø 14 mm -Holes: Ø 12 mm / Distance: retracted 323 mm -Dimensions: 370/73/H75 mm -Weight: 2.4 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders, lifting power jacks -Manufacturer: Milwaukee, double-acting hydraulic cylinder stroke 600 mm -Type: H-73 -Piston rod: Ø 16 mm -Holes: Ø 25 mm / Ø 18 mm -Dimensions: 885/220/H180 mm Nodpfxsv Nip Us Abkowh -Weight: 16.3 kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 73 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Brake -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Weight: 18.5 kg Nsdsci N H Uepfx Abkjwh

Condition: used, Collet holder, tool holder, tool holder, milling holder, milling tool -Adjustment: SK50 -without adapter sleeves -Manufacturer: HOLEX -Type: SK 50-3/32-73 Nwedpfsc U Tz Tjx Abksh -Hoffmann Group No.: 302 460 50 -Weight: 3.4 kg

Condition: used, Gear motor, electric motor -Speed: 73 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Dimensions: 405/195/H165 mm -Weight: 14.8 kg Nwedpfx Ajc U Rhysbkjh

Condition: new, 10 St. weight 162 kg range L-W-H 1200 x 800 x 1050 mm Nwodsu Imluspfx Abkoh Workshop trolley with 30 mm thick solid wood panel. Solid drawers with ball bearings (double bearings) All drawers can be opened 100%. Equipped with scratch and impact resistant powder coating. Each drawer is equipped with an anti-slip mat. All drawers are equipped with a drawer lock. The doors have a magnetic lock and lock. Tool trolley is equipped with 10 drawers and a cabinet with 2 doors. Scope of delivery: 2 x 125 mm. Heavy swivel castor with brake. 2 x 125 mm. Heavy firm roles. 1 x robust handle made of solid steel. 3 x lock for all drawers and doors.

Condition: used, maximum load weight: 6,920 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 09/2016, loading space length: 7,200 mm, loading space width: 2,460 mm, loading space height: 2,620 mm, loading space volume: 46 m³, Equipment: ABS, Tyres 245/70 R19.5 Tread depth in mm 5/5-5/5 Axle type Gigant Gross weight 10,500 kg Unladen weight 3,580 kg Equipment: air suspension, disc brakes, loading area 7.2 x 2.46 x 2.62 m, through-loading function----As viewed or offered, without any additional services or accessories. Our offer does not include a new technical inspection (TÜV) by default. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops! Vehicle may have advertising decals and/or lettering applied. Our general terms and conditions of delivery and payment apply. We support you with export, preparation of export documents, procurement of license plates, supplier declarations, etc.! The information provided in advertisements, online listings, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing or data transmission errors. Listed equipment must be checked separately if required. We expressly reserve the right to prior sale as we also offer this item on other platforms. Information on accessories is given without guarantee. Changes, prior sale or errors excepted. We strongly offer and recommend viewing and inspection, to avoid any misunderstandings regarding the condition and suitability of the vehicle for the buyer. Vehicle and tarpaulin may be labeled, images may be edited. We sell exclusively under our general terms and conditions, with all warranties excluded. Nwedpfx Abex Tbxnekoh Viewings and inspections are possible at any time by appointment and are expressly encouraged.

Condition: used, We offer this used ARI Ds-73+1 Ari ds-73 ks-12. Söderhamn / Ake, year of manufacture unknown. Nwodpfey Er T Hsx Abkeh If you have any questions or need more information, feel free to send us a message or call us.

Condition: ready for operation (used), A complete UPG system for polyester resin granulate production is available. 1) High-speed Henschel fluid mixer FM 350C, speed: 1500 rpm, heating unit: Lauda. 2) Raw material supply system with 6 bunkers, screws and vibrating chutes. 3) Conveying system with a collecting tank located 9m above the mixer and a Demag 4t rope hoist. 4) Schenk fluidized bed cooler. 5) Engelsmann ED 250/4 flat bed screen. 6) Alpine B40/63 RO granulator. 7) 2 annular gap compactors Siemens. 8) 2 Kessler & Luch blowers, volume flow: 7000m³/h. 9) Aerobic filter, filter capacity: 4000m³/h. Documentation available. On-site inspection is possible. Nsdpfxewk Nk Te Abkswh

Year of construction: 2001, condition: ready for operation (used), An Alfa Naval disc stack centrifuge module for separating foreign oil from water-based coolants is available. Speed: 7500rpm, throughput with water-based coolant: approx. 480l/h, max. medium temperature: 70°C. Machine dimensions X/Y/Z: approx. 650mm/550mm/1200mm, weight: approx. 60kg. An on-site inspection is possible. Nwodpsxrf Nxofx Abkoh

Year of construction: 2000, condition: ready for operation (used), A complete bottle rinsing system with Klinger bottle rinsing machine, Hager + Elsässer drinking water treatment system and Ro reverse osmosis system is available. 1) Bottle washer Klinger Euro Class-D 20/1/73, year of construction: 2000, capacity: 9600 bottles/h, cycle time: 7.5s, cycle time: 12.63min, bottles per row: 20, number of rows: 107, max. bottles in the machine: 2020, water consumption: 3.8m³/h, tank volume soft caustic/post-caustic: 5600l/740l. Dimensions X/Y/Z: approx. 8000mm/3400mm/2800mm, weight: approx. 16000kg, control system: Siemens S7. 2) Drinking water treatment plant Hager +Elsässer consisting of cation and anion exchanger, capacity: 5m³/h. Including salt tank, pre-filter and UV sonde. 3) RO reverse osmosis system, full desalination capacity: 2.5m³/h. Documentation available. On-site inspection is possible. Nwsdjtwqzljpfx Abksh

Condition: used, functionality: fully functional, roll diameter: 50 mm, roll width: 73 mm, roll pitch: 55 mm, total width: 95 mm, total height: 70 mm, total length: 1,703 mm, conveying length: 1,703 mm, construction width: 95 mm, construction height: 70 mm, roll spacing: 55 mm, overall weight: 15 kg, TAF item number: 1000004078 Manufacturer: unknown Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 1,703 x 95 x 70 Width incl. side panel in mm: 80 Side height in mm: 60 Conveyor length in mm: 1,703 Conveyor width in mm: 73 Conveyor height in mm: 70 Roller pitch in mm: 55 Substructure: none Support roller axle type: rigid axle Support roller diameter in mm: 50 Nodpfeyluxdex Abkjwh Support rollers per axle: 1 Support roller material: steel Drive: gravity Net weight in kg: 15 Special features: none Condition: used / fully functional Function test: OK

Year of construction: 2021, condition: ready for operation (used), Suitable for the separation of free oils from cooling lubricants, max. output: 500l/h, max. liquid temperature: 70°C, pH value: 6-9, length: 620mm, width: 510mm, height: 1140mm, weight: 60kg, with documentation. Nwedpfxjk E Nccj Abkjh

Condition: used, Year of construction: 2000, operating hours: 15,800 h, Used Bottle Washer KLINGER up to 9600 bph This Bottle Washer handles up to 9,600 bottles per hour. The machine features 20 bottles per row, ensuring a long soaking time and double lye pumps. Constructed entirely of stainless steel, this bottle washer uses a Siemens S7 control system, ensuring reliable and precise operation. Technical Specifications of the Washing System The Used Bottle Washer KLINGER up to 9600 bph includes double heaters and overflow pumps, providing a high cleaning capacity. Consequently, this configuration treats each bottle uniformly, enhancing the efficiency of the washing process. The Siemens S7 control system, furthermore, offers a user-friendly interface via a touch panel, simplifying operational management. Potable Water Treatment Plant Potable water treatment plays a crucial role in the proper functioning of the bottle washer. Hager + Elsässer provides the plant, which includes cation and anion exchangers, a salt container, a pre-filter, and a UV probe. This system processes 5 m³/h, ensuring high-quality water. Additionally, the reverse osmosis (RO) plant delivers a total desalination capacity of 2.5 m³/h, ensuring pure water for the washing process. Electrical Configuration and Control Panels This Bottle Washer features three electrical panels, arranged from left to right, with a Siemens touch panel for centralized control. This configuration allows for accurate monitoring and optimal operational management. In addition, the upper panels handle cooling, with a total residence time of 4.13 minutes and a treatment time of 1.63 minutes. Technical details Bottle cells: width and diameter: height 100 mm. 360 mm spray hole in the base of the cell diameter 20 mm. The bottle cell is not round on the lower insertion side, but flattened , so that even bottles with small diameters can be inserted into the cell without any problems. Bottles from 200 ml to 1,500 ml can be rinsed. The diameter of the bottle mouth must not be smaller than the spray hole in the bottom of the cell, i.e. at least 20 mm. If the bottles are very light, or made of PVC, the spray pressure of the pumps could be reduced using software, so that the bottles are not sprayed out of the cell. Fort PVC bottles the diameter of the bottles should not be smaller than 50 mm, depending on the shape and weight. The higher the weight, the better… PVC bottles do not cause problems because of their shape or diameter, but are usually too light… So your bottles can be easily worked. Treatment and Spraying Details of the Used Bottle Washer KLINGER up to 9600 bph The central panel, on the other hand, manages the spraying times with the following specifications: Nodpfxsxqmrfj Abkewh Spraying soda: 0.5 min. Residual soda: 0.83 min. Hot water: 0.38 min. Warm water: 0.38 min. Cold water: 0.38 min. Fresh water: 0.

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Nwedpfswu Tu Dox Abkeh Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: used, functionality: limited functionality, gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 20,000 kg, number of seats: 1, first registration: 01/1992, Year of construction: 1992, machine/vehicle number: 20412, Equipment: additional headlights, cabin, parking heater, We offer this used Mannesmann Demag V 73 mobile crane, year of manufacture 1992. Type: V 73 Chassis number: 20 412 Year of first commissioning: 1992 Permissible total weight: 20,000 kg Permissible front axle load: 10,000 kg Maximum lifting capacity: 14 t Maximum outreach: 13 m Nwedpsyi D Ddefx Abkoh Last inspection: 2023 The load moment limiter is not operational. If you have any questions or require further information, please feel free to send us a message.

Condition: excellent (used), functionality: fully functional, Alfa Laval / Tetra Pak Cream Pasteurization Line Alfa Laval / Tetra Pak Cream Pasteurization Line | Piston Pump, Buffer Tank, Flowmeter, Pasteurizer Complete cream pasteurization line from renowned manufacturers Alfa Laval and Tetra Pak, equipped with high-quality pumps, valves, flowmeters, and control cabinets. The line is designed for hygienic and efficient cream pasteurization in the dairy industry. Capacity: 35,000 liters/hour Main components of the line: 1. Circumferential Piston Pump Manufacturer: Alfa Laval Type: DURACIRC 73 Serial Number: E256143 Year of Manufacture: 2021 Dimensions: 1600 × 600 × 800 mm Included: various valves and stainless steel filter housing 2. Stainless Steel Buffer Tank Tank dimensions: Ø 1100 × 1700 mm Total dimensions: Ø 1200 × 2900 mm 3. Alfa Laval Valves, Type: Unique SSV (6 pcs.) High-quality single seat valves for food applications 4. Flowmeter Manufacturer: Endress + Hauser Model: Promag P / Promag P Dimensions: 200 × 200 × 350 mm High-precision flow measurement for food-grade liquids 5. Centrifugal Pump Manufacturer: LKM Type: LKH 20/155 Power: 5.5 kW Production Number: 20-02319 Dimensions: 700 × 380 × 400 mm Stainless steel construction, suitable for CIP operation 6. Valve Manufacturer: Armaturen AG Type: MA9.31A6 5S Po Dimensions: 600 × 400 × 400 mm 7. Cream Pasteurizer Manufacturer: Alfa Laval / Tetra Pak Type: C10-SH Serial Number: 30104-38526 Year of Manufacture: 2003 Capacity: 1311 liters Nodpfxextu Ugj Abkowh Operating parameters: Operating pressure (PS): 0 / 20.0 bar Test pressure (PT): 28.6 bar Temperature range (TS): 0 / 130 °C Dimensions: 5000 × 800 × 2200 mm High-efficiency heat exchanger system ensuring stable pasteurization 8. Centrifugal Pump Manufacturer: Pomac Type: CP29068/230 X 15 Serial Number: 22 818 Year of Manufacture: 12/2011 Capacity: 45 m³/h Power: 15.0 kW Dimensions: 950 × 400 × 500 mm 9. Nocado Valves (5 pcs.) Process valves for food applications 10. Control Cabinets Manufacturer: Eldon and IPBE Dimensions: 400 × 230 × 770 mm 1000 × 300 × 1000 mm The Alfa Laval / Tetra Pak Cream Pasteurization Line is a complete industrial solution with a capacity of up to 35,000 l/h, designed for high hygiene, precise process parameter control, and maximum reliability. Ideal for dairies, cream and milk fat producers.

Condition: good (used), Year of construction: 2008, machine/vehicle number: TP2088 08, Exchanger in good condition, used last year. Nwjdpfx Absvtrtwekjh

Year of construction: 2004, condition: excellent (used), functionality: fully functional, 2004 Elumatec AKS 134 Notching Saw – High-Precision Notching for Curtain Walls, Skylights & Conservatories Manufacturer: Elumatec Nodpfxexyupko Abkjwh Model: AKS 134 Year: 2004 Condition: Very Good Now available: Elumatec AKS 134 Notching Saw, manufactured in 2004 and in very good condition. This robust, German-engineered machine is purpose-built for precise notching in aluminium profiles, specifically designed for fabricators working on curtain walls, conservatories, skylights, and other complex architectural aluminium systems. The AKS 134 features a dual-saw unit design — vertical and horizontal — offering exceptional flexibility, accurate angles, and safe operation. Combined with digital angle displays, hydro-pneumatic feed, and automated cutting cycles, this is a premium choice for serious aluminium fabricators. 🛠️ Key Technical Specifications: 🔻 Lower Vertical Saw Unit: Saw Blade Diameter: 550 mm Tilting Range: +45° forward to -60° rear Max Cutting Height: 210 mm Motor Power: 3 kW (with motor brake) Speed: 2,800 rpm Manual Tilt Adjustment with Digital Display 400V, 3~, 50Hz 🔺 Upper Horizontal Saw Unit: Saw Blade Diameter: 500 mm Tilting Range: +55° down to -60° up Max Notching Depth: 190 mm Motor Power: 3 kW (with motor brake) Speed: 2,800 rpm Travel Distance: up to 830 mm Manual Tilt Adjustment with Digital Display 400V, 3~, 50Hz ⚙️ Machine Features: Dual saw blades for versatile and complex notching Workpiece stays fixed – only the saw units move, enhancing precision Simultaneous vertical saw unit height adjustment via handwheel (with analogue readout) Digital angle displays for both saws and pivoting back fence Manually adjustable support table Horizontal and vertical pneumatic clamping Automatic cutting cycle at 90° with two-hand safety control for angled cuts Hydro-pneumatic saw feed for smooth, consistent cutting Compressed Air Supply: 7 Bar (35–45L per cycle) 📏 Machine Dimensions & Weight: Footprint: 3000 × 1420 × 1600 mm Weight: 1,250 kg 🏗️ Ideal For: Aluminium façade and curtain wall manufacturers Skylight and conservatory fabricators Precision aluminium notching applications Workshop environments needing multi-angle notching in high volumes 🧰 Reliable, accurate, and engineered for demanding tasks, the Elumatec AKS 134 is a proven performer in the architectural aluminium industry. Elumatec AKS 134 for sale Aluminium notching saw Ireland Curtain wall notching machine Elumatec saw for curtain wall systems Notching saw for aluminium profiles Elumatec AKS 134 specifications 550mm notching saw Double blade notching saw Used Elumatec machinery Aluminium construction saw Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 20186/2006/01, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 325 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 7,200 mm, feed length Y-axis: 480 mm, feed length Z-axis: 325 mm, controller manufacturer: Elumatec, workpiece length (max.): 7,200 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 8, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, 2006 Elumatec SBZ 130 Profile Machining Centre – High-Performance Aluminium CNC Machine 📍 Location: Ireland 🛠️ Machine Type: 3-Axis CNC Profile Machining Centre 📅 Year of Manufacture: 2006 ✅ Condition: Very Good / Fully Operational 🔧 Brand: Elumatec – German Engineering Excellence 🔧 Machine Description: The Elumatec SBZ 130 is a high-precision CNC profile machining centre designed for efficient and versatile processing of aluminium, steel, and stainless steel profiles. With fully automatic 3-axis control and flexible machining capabilities, it's ideal for manufacturers in the window, door, façade, and industrial profile fabrication sectors. 🧰 Included Features & Equipment: Automatic Tool Turret with 8 Tool Positions • Holds standard tools or angle milling heads • Rapid rotation ensures minimal tool change times 2 x Angle Milling Heads – included for advanced profile cutting Automatic Length Measurement – improves precision and workflow Two Independent Machining Zones – for pendulum operation and non-stop production Tool Spindle with Additional Axis Functionality – enhances machining flexibility All Operations Performed with Stationary Profile Bar • Protects profile surface during milling, drilling, and threading Multi-position Pneumatic Clamping System Coolant & Minimum Quantity Lubrication System (MQL) Tool Holders in photos Included This 2006 model is in very good condition, fully functional, and ready to be put into service. 📐 Technical Specifications: X-axis Travel (Longitudinal): 7,200 mm Y-axis Travel (Transverse): 480 mm Z-axis Travel (Vertical): 325 mm Spindle Power: 5.5 kW Max Spindle Speed: 6,000 rpm Nodpfjwwau Nox Abkjwh X Axis Rapid Traverse: 60 m/min Y Axis Rapid Traverse: 30 m/min Z Axis Rapid Traverse: 30 m/min Tool Changer: Automatic 8 position magazine Angle Milling Heads: 2 Angle Milling Heads Speed: 10,000 rpm Control System: Elumatec ELMU with full NC control Machining Capabilities: • Drilling, Routing, Tapping, Notching, Slotting • Machining on 3 sides of the profile without repositioning Clamping System: Pneumatic profile clamps (movable and programmable) Compressed Air Connection: 7 Bar Compressed Air Consumption: 75 L/min with spraying Cooling/Lubrication: Minimum quantity lubrication (MQL) system Operation: Front-loading with safety light curtain 🧰 Machine Includes: Multi-position automatic tool changer Angle Milling Heads x 2 Pneumatic profile clamping system Cooling/lubrication system Operator control console Selection of tool holders as seen in photos 💡 Key Features & Benefits: German-built machine with exceptional reliability High-speed 3-axis control for complex machining tasks Machining without profile repositioning – improved productivity Perfect for aluminium window & door fabrication, curtain wall profiles, industrial extrusion machining Can be integrated into automated production lines Ready to work – tested Elumatec SBZ 130 for sale used Elumatec machining centre CNC aluminium profile machining centre 3 axis profile router, aluminium window door CNC machine Elumatec CNC machine Ireland CNC notching machine used façade profile machine high-speed CNC profile mill Elumatec SBZ CNC profile router Notes: *Specifications are given in good faith but not guaranteed*