Used Demag Dh2100 H18 - 40T for sale (989)

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, machine/vehicle number: WB-Res, DEMAG KBK overhead crane system, span approximately 11x7m – extension possible! Load capacity / lifting capacity 1000 KG - 1 ton Technical data of the system: Crane track made of Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, running gears, end plates, cable carriers, supports/hangers, etc. including power supply in the bridge! including Demag PK5 1000KG chain hoist Crane is disassembled and immediately available Several bridges with spans from 5-8m are available, please inquire about the required dimensions (length and width)! Available load capacities: 500, 700, 800, 1000 KG Very good condition, see pictures Item location is 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2 and KBK3 rails are in stock! Other KBK systems are also in stock. Load capacity 125KG - 1600KG Fedpfx Ajzxa Rweivopn Please inquire about your overhead crane system with the required load capacity and dimensions.

Condition: excellent (used), Year of construction: 2014, Clamping force: 650 t Screw diameter: 60 mm Injection volume: 891 cm3 Shot weight: 810 g Distance between tie bars V: 1020 mm Distance between tie bars H: 1020 mm Platten dimensions H x V: 1450 x 1470 mm Max. oppening stroke: 930 mm Min Mould installation height: 450 mm Type: Horizontal Drive: Hydraulic \+ Cooling water flow controller (2x 6 circuits) \+ Robot Sepro SR SDR5X35 HL S5 TRANS (2014) Hot Runners 1. 24-zone integrated hot runner controller (ZE 273) 2. 32-zone integrated hot runner controller on fixed platen (ZE 274), extended to 36 zones (SO 10) 3. Pneumatic needle valve nozzle control, 1× 5/2-way valve (ZE 276) 4. Hot runner connector upgrade for 24 zones (SO 01) 5. Total: 60 zones across two controllers Equipment Highlights Injection 1. Electric screw drive, frequency-controlled (WA 313) 2. High-speed injection with central accumulator, servo-valve controlled (WA 361 + SO 12) 3. 4-fold pneumatic cascade injection + Gammaflux cascade interface (SO 05 + SO 08) Quality & Process Monitoring 1. Priamus cavity pressure measurement + BlueLine integration (SO 02 + SO 04) Fpjdpsyzylvjfx Aivsn 2. Holding pressure switchover with peak value capture and recording (ZE 350) 3. 100% process data recording (PDE) with statistics and graphics (ZE 420) Mold & Core Pulls 1. 4 core pull circuits via proportional valves, flow-independent (ZE 234 + ZE 237) 2. Electric pressure relief for core pulls (SO 27) 3. Separate pneumatic hot runner needle (SO 04x) Quick Mold Clamping 1. Full quick-clamp system — interface, power supply, installation & testing (SO 23a–d) Connectivity & Automation 1. OPC/UA interface for host systems (SO 5631) 2. WC5 World Connect — remote access and service (ZE 571) 3. Integrated BDE/PDE production data management (ZE 471 + ZE 420) 4. Demag robot interface via CAN bus (ZE 752) Energy & Infrastructure 1. Integrated energy monitoring with per-part cost calculation (ZE 4921) 2. Elastic machine mounting / vibration isolation (WA 180) \+ 2x Magnetic platten

Year of construction: 1988, condition: used, machine/vehicle number: MBMA13+25, Technical data: 1x Demag KBK 100 column slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125ton payload Height: approx. 3m UK boom: approx. 2.65m Projection: 3m Hook height: approx. 2.15m Weight completely approx. 350KG Fsdpjrhzh Ssfx Aivopn with 125KG Demag DK chain hoist including bolts, cable drag, chassis, end cap etc. Crane is available twice Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Shipping by courier or collection only by appointment

Condition: ready for operation (used), Year of construction: 2021, operating hours: 9,500 h, clamping force: 1,000 kN, overall weight: 5,290 kg, This 5-axis SUMITOMO SHI DEMAG IntElect2 100/470-250 was manufactured in 2021. It features a clamping force of 1000 kN and a tie bar distance of 470 mm. The machine includes an injection unit size of 250 and a screw diameter of 30 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG IntElect2 100/470-250 electrical injection moulding machine we have for sale. Contact us for further details. Fpsdpfxszp Ew Do Aivsn - Tie Bar Distance: 470 mm- Mould Height Min.: 180 mm- Mould Height Max.: 550 mm- Centering Diameter (Fixed Platen): 125 mm- Centering Diameter (Moving Platen): 125 mm- Ejector Stroke: 150 mm- Ejector Force: 32 kN- Ejector Speed: 333 mm/s- Injection Unit Size: 250- Screw Diameter: 30 mm- L/D Ratio: 20- Injection Speed: 350 mm/s- Control Unit: SDIAS- Mains Connection / Voltage: 400 V / 50 Hz- Current / Amperage: 70 A- Short Circuit Capacity (Icw): 2.0 kA- Max. Hydraulic Pressure (Pmax): 210 bar- Total Weight: 5290 kg- Robot System Model: SDR 5S H&P- Robot Load Capacity: 3 kg- Robot X-Stroke (Transverse Stroke): 1000 mm (Non-operator side)- Robot Y-Stroke (Demoulding Stroke): 400 mm- Robot Z-Stroke (Vertical Stroke): 1000 mm- Additional / Peripheral Equipment:- Material Hopper Loader / Conveyor: KOCH TECHNIK- Temperature Control Unit: HB-THERM Thermo-5

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: CR-16/994882, Demag EPKE-O bridge crane, hall crane, crane, crane gantry, crane runway Load capacity / lifting capacity 3.2 - 3200 kg Gauge approx. 17000 mm, overall dimension approx. 17200 mm Demag DR-COM wire rope hoist 3200 kg (EKDMR 3) Lifting height 10 m with floor control and fine positioning Overall height from top of crane to hook approx. 1100 mm Head beam length with buffer approx. 2.8 m Fjdpfx Aiszh Uyljvjpn Crane is dismantled and available immediately Very good, used condition Column-mounted swivel cranes and wall-mounted swivel cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code Collection is preferred

Condition: used, Year of construction: 1998, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Fpsdpfxjz D U Rmo Aivon Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 80 kN Ejector retraction force: 35 kN INJECTION UNIT (840) Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1946 bar Stroke volume: 442 cm³ Shot weight (PS): 400 g Max. dosing stroke: 225 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 14.8 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l

Condition: ready for operation (used), Year of construction: 2013, operating hours: 23,000 h, clamping force: 1,200 kN, screw diameter: 40 mm, Hydraulic injection moulding machine manufactured in 2013. This SUMITOMO SHI DEMAG Systec 120/470-430 features a clamping force of 120 t and a screw diameter of 40 mm. It offers a maximum metering volume of 231 cm³ and a distance between tie bars of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 120/470-430 machine we have for sale. Contact us for further details. Fpjdpfoz Eq Svox Aiven - Max. Specific Injection Pressure: 2025 bar- Max. Metering/Dosing Volume: 231 cm³- Mold Height Min./Max.: 250 / 850 mm- Distance Between Tie Bars: 470 x 470 mm- Centering Ring Diameter (Ejector/Nozzle): 125 mm- Core Pull: 1 circuit via switching valve on movable mold platen (Q-independent)- Operating Hours: Drives 23,000 hrs- Pump Drive Power: 22.0 kW- Power Supply: 400 V +-10% / 50 Hz, 3 Ph + N + PE- Oil Cooler Max Water Temp: 25°C

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: MIKA103, DEMAG KBK overhead crane system, dimensions approximately 26 x 3.4 m Load capacity / lifting capacity: 2 x 50 kg per suction lifter Technical data of the system: Overhead crane system consisting of Demag KBK1+2 rails System will be delivered complete: KBK rails, rail connectors Carriages, end plates, cable track, brackets/hangers, etc. Includes 2x vacuum pump with 2x suction lifters, load capacity per lifter 50 kg Includes various spare parts (approx. 3 suction lifters) and 1 additional crane bridge as a spare System is dismantled and packed on a pallet Fjdszv Iyhepfx Aivjpn Connection to 400V 16A power supply and compressed air Item location is 75053 Gondelsheim Very good condition - see pictures Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2 and KBK3 rails are in stock!

Condition: ready for operation (used), Year of construction: 2005, clamping force: 1,600 kN, screw diameter: 45 mm, Hydraulic injection moulding machine manufactured in 2005. This DEMAG Ergotech Extra 160-430 features a clamping force of 1,600 kN and a maximum injection volume of 259 cm³. It has a screw diameter of 45 mm and accommodates molds with a maximum height of 585 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech Extra 160-430 machine we have for sale. Contact us for further details. Fjdpfx Aisz Ibikjvjpn • Space between columns: 520 x 520 mm • Maximum mold height: 585 mm • Minimum mold height: 275 mm • Maximum injection volume: 259 cm³ • Maximum injection pressure: 1,600 bar • Centering ring: 160 mm • Hot runners in the machine: 8 • Core puller: 1 • Pneumatic valves: 2 • Programmable inputs: 2 Additional equipment • Hiltectro V-1000 IS robot (MY: 2020) • Belt conveyor with safety enclosure

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Fjdpfx Aioyg Eu Sovjpn Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 Hours: 42493 extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: MIKA111-Kran152, DEMAG KBK overhead crane, dimensions approx. 18.2 x 3 m Fpedpfx Aszv Icveivon Load capacity / lifting capacity 2 x 50 kg per vacuum lifter Technical data of the system: Overhead crane track 2 x 8 x 3 m made of Demag KBK2 rails Height of steel structure 4 m Top of steel structure (purlin) 4 m Bottom of steel structure (purlin) 3.72 m Bottom of crane track 3.35 m Bottom of bridge 3 m Width approx. 3.1 m Lifting height of vacuum lifter approx. 30-220 cm External dimensions of steel structure (space requirement) 18.3 x 3.1 m Support spacing 8.85 m Dimensions of overhead crane track approx. 8 x 3 m System is delivered complete: KBK rails, rail connectors Carriages, end plates, cable track, holders/hangers, etc. + complete steel structure (IPE180 + square tube 150x150 mm) incl. 2 x vacuum pump with 2 x Palamatic vacuum tube lifter 3, capacity 50 kg System is disassembled and packed on a pallet 1 vacuum lifter is available as a spare Item location is 75053 Gondelsheim Very good condition - almost new. See pictures. Shipping by freight forwarder or pick-up only after prior arrangement. Demag KBK1, KBK2 and KBK3 rails are in stock!

Condition: excellent (used), Year of construction: 2003, Demag Ergotech - system 250/280-80, clamping force 25 tons, screw diameter 25 mm, year of manufacture 2003, sprue picker included. Fjdox Em E Ropfx Aivspn

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 7814-0045, total length: 4,000 mm, total width: 1,500 mm, total height: 2,000 mm, Weight approximately 3000 kg For sale is a used machine from a site closure. Fpjdpjzqam Asfx Aivjn Sale is made excluding any warranty for defects. The machine has not been inspected but was operational until the very end.

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), overall weight: 25,340 kg, This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for sale.Contact us for more information. Additional information • Screw Diameter: 50 mm • Maximum Dosing Volume: 530 cc • Cycles: 12875090 Fpjdpfx Aiex D Nxzjvsn • Tiebar Spacing: 820 mm • Clamping Force: 3500 kN

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Fpjdpfx Aez Iqlboivjn Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: new, functionality: fully functional, 80 pcs new DEMAG rope guides / rope guide crane hoist parts for DH2000 DH1000 DH500 DH300 and 30x P-Zug rope guides P200 to P1000 plus 50 brakes (e.g. new brake discs, brake pads, brake shields, brake covers) all brand new Manufacturer's original price approx. €300,000.00 Info: We have over 20,000 DEMAG spare parts in stock! Fjdpjv T Tq Djfx Aivjpn Also check my other offers from warehouse stock!

Condition: like new (used), functionality: fully functional, machine/vehicle number: 94447285, Year of construction: 2023, lifting height: 4,000 mm, chain length: 4,000 mm, load capacity: 500 kg, lifting speed: 75 mm/s, fine lifting speed: 18 mm/s, power: 0.49 kW (0.67 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, For sale is a like-new, immediately ready-for-use Demag electric chain hoist, including a matching aluminum track (3.8 m), trolley, and a professional Demag wireless remote control. The system was manufactured in June 2023 and is in excellent, well-maintained condition. Fedpfozxg T Esx Aivjpn Technical data (chain hoist): Model: Demag DC-COM 5-500 (1/1 H4 V4.5/1.1) Year of manufacture: 06/2023 Load capacity (SWL): 500 kg (0.5 t) Hook travel / chain length: 4.0 m (4000 mm) Lifting speeds: 4.5 m/min (main speed) / 1.1 m/min (fine lifting speed) Motor power: 0.49 kW / 0.10 kW Operating voltage: 3 ~ 380–415 V / 50 Hz Protection class: IP 55 Features & scope of delivery: Demag electric chain hoist with chain and load hook Aluminum track (length: 3.8 m) including trolley Demag wireless remote control (handheld transmitter) for precise and wireless operation Including the corresponding charging unit/power supply and connection cable Ideally suited for workshops, warehouses, or assembly workstations where precise and safe lifting is required. Inspection is possible by arrangement.

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: CR-Lack DK solo, Demag chain hoist crane lifting mechanism 1x 2500 kg, DKUN20-1250 K V1F4 Payload: 1x 2500 kg / 2.5 tons, lifting capacity - 2-strand Fjdszv H Htjpfx Aivjpn 5 chain hoists available!!! With articulated trolley drive, undercarriage prepared for mounting on approximately HEA/HEB/HEM profiles (flange width 300 mm) With 2 lifting speeds, lifting height 7 m!!! With floor control Length of the lifting mechanism approximately 1.25 m Total weight approximately 250 kg, connection to 400V 50Hz Very good condition, fully functional Item location is 75053 Gondelsheim See pictures.

Condition: used, Year of construction: 2006, Demag Modular 250/560-1450 Euromap size: 2500-1450 CLAMPING UNIT Clamping force: 2500 kN Locking force: 2750 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 69 kN Ejector retraction force: 31 kN INJECTION UNIT (1450) Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1400 bar Stroke volume: 1039 cm³ Shot weight (PS): 940 g Max. dosing stroke: 270 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 20 mm Nozzle contact force: 110 kN Fsdpfsz D Tnqox Aivspn Barrel heating power: 27.0 kW Electric screw drive (WA): 30 kW Hopper capacity: 110 l GENERAL Oil tank capacity: 500 l Pump motor: 30 / 37 kW Total installed power: 57 kW (64 kW with electric screw drive) Dry cycle time (EUROMAP 6): 2.35 s – 392 mm / 2.25 s – 392 mm Net weight (without oil): 11200 kg Dimensions (L x W x H): 5.7 x 1.7 x 2.2 m (length without injection unit overhang) Noise level: 74 dB(A)

Condition: used, mileage: 67,200 km, first registration: 06/2009, fuel type: diesel, tire size: 16.00 R 25, axle configuration: 6x6, fuel: diesel, Year of construction: 2009, Equipment: ABS, air conditioning, crane, = Additional Options and Accessories = - 6x6 - PTO = Further Information = Tire size: 16.00 R 25 Front axle: Steered; Tire tread depth left: 55%; Tire tread depth right: 55% Rear axle 1: Steered; Tire tread depth left: 70%; Tire tread depth right: 70% Rear axle 2: Steered; Tire tread depth left: 40%; Tire tread depth right: 40% Fedpezvcz Tsfx Aivopn Unladen weight: 36,000 kg GVWR: 36,000 kg Lifting capacity: 50,000 kg Crane: Year of manufacture 2009 Damage: None

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, lifting height: 6,000 mm, load capacity: 3,200 kg, DEMAG EKDR 3 complete trolley with hoist and travel motor, including all cables / festoon cable trolley / power supply lead / control switch (see last photo) Year of manufacture: 2007, Reeving 4/1, Gear ratio i=67, Load capacity 3200 kg, Lifting speed 6 m/min and 1 m/min Very good condition Many trolleys in stock, also available in other sizes Fodpfxoyyu S Ue Aivjpn

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: MIKA110-Kran152-33?, DEMAG KBK overhead crane, dimensions approx. 8.8 x 3 m Payload / lifting capacity: 1 x 50 kg at the suction lifter Technical data of the system: Overhead crane track 8 x 3 m, made of Demag KBK2 rails Height of steel structure: 4 m Top of steel structure (purlin): 4 m Bottom of steel structure (purlin): 3.72 m Bottom of crane running rail: 3.35 m Bottom of bridge: 3 m Width: approx. 3.1 m Lifting height of suction lifter: approx. 30-220 cm External dimensions of steel structure (space requirement): 9.3 x 3.1 m Support spacing: 8.85 m Dimensions of overhead crane track: approx. 8 x 3 m Fpedpfxjzv Ib Ss Aivon The system will be delivered complete: KBK rails, rail connectors Carriages, end plates, cable carrier, brackets/hangers, etc. + complete steel structure (IPE180 + square tube 150x150 mm) Incl. vacuum pump with Palamatic vacuum tube lifter 3, capacity 50 kg The system is disassembled and packed on a pallet Item location is 75053 Gondelsheim Very good condition - almost new. See pictures. Shipping by freight forwarder or collection by appointment only. Demag KBK1, KBK2, and KBK3 rails are in stock!

Condition: excellent (used), Year of construction: 2007, clamping force: 350 kN, screw diameter: 22 mm, clearance between the columns: 280 mm, injection pressure: 2,061 bar, injection weight: 37 g, ejector stroke: 100 mm, Clamping force: 35t Year of manufacture: 2007 Injection weight: 37g Injection unit 80 Screw diameter: 22 mm Specific injection pressure: 2061 bar Injection volume: 42 ccm Injection weight: 37 g Screw L/D ratio: 20 Tool closing system 35 Clamping force: 35 t Tool plate dimensions: 390x390 mm Distance between columns: 280x280 mm Ejector force: 26 kN Ejector stroke: 100 mm Fodpfx Ajzt Itceivepn Weight: 2200 kg Control system: MC4 Equipment: - Hydraulic core - Pneumatic valve

Condition: used, Year of construction: 2007, DEMAG Ergotech System 1300/1500-11500 injection moulding machine from 2007 with 13,000 kN clamping force, 110 mm screw diameter and 5,200 g shot weight. Equipped with a Wittmann DR 853 227 linear handling robot (2014) featuring servo B axis 270° and C axis 90°, plus 32 hot runner control zones for advanced multi-cavity production. Factory-configured with 4 hydraulic core pulls and 12 cascade circuits for complex technical moulding applications. CNC CONTROL Controller: Demag Ergocontrol CLAMPING UNIT Clamping force kN: 13.000 Tie-bar clearance (H x V) mm: 1.500 INJECTION UNIT Injection unit size (Euromap): 11500 Screw diameter mm: 110 Max. shot weight (PS) g: 5.200 MOULD FUNCTIONS & HANDLING Hydraulic core pull circuits: 4 Cascade / valve gate circuits: 12 Hot runner control zones: 32 Handling robot (model / year): Wittmann DR 853 227 (2014) Robot strokes X / Y / Z mm: 1.600 / 2.500 / 3.500 Fodpfxjzz Rw He Aivopn Robot rotary axes (B / C): C 90° / B servo 270° DRIVE Max. hydraulic pressure bar: 190 Mains connection V / Hz / A: 3 x 400 / 50 / 348 + 201

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: MIKA Seilzüge, 1x Demag DR wire rope hoist crane Due to numerous inquiries - Price is per unit! Fsdpfx Aisy D D S Ssvjpn 5 units available, see listing below: 1x Demag wire rope hoist EKDR-Pro3 NL1600Kg/1.6t, serial number 96656002, 4M, hook path/lift 12m! – double reeved, year 2015 1x Demag wire rope hoist EKDR-3 NL1600Kg/1.6t, serial number 96656701, 2M, hook path/lift 12m! – double reeved, year 2015 1x Demag wire rope hoist EKDR-3 NL1000Kg/1.0t, serial number 96305549, 4M, hook path/lift 12m! – double reeved, year 2012 1x Demag wire rope hoist EKDR-3 NL1000Kg/1.0t, serial number 96305548, 4M, hook path/lift 12m! – double reeved, year 2012 1x Demag wire rope hoist EKDR-3 NL1600Kg/1.6t, serial number 96305550, 4M, hook path/lift 12m! – double reeved, year 2012 Each with 2 lifting speeds, lifting height 12m, trolley gauge adjustable Each hoist supplied with pendant control and power supply plug Total weight approx. 300 kg, connection to 400V 50Hz Very good condition, see photos Item location: 75053 Gondelsheim Shipping available, please inquire with your postal code