Used Delta Delta Pallet Nailing Machine Line for sale (73,007)

Condition: new, Year of construction: 2026, • Two main electric motors, each with a power of 11 kW • Maximum material thickness: 250 mm • Maximum material width: 300 mm • Minimum cutting height: 10 mm • Adjustable feed rate: 5-25 m/min • Lower saw blade stroke: 10-150 • Upper saw blade stroke: 20-190 • Minimum distance between the saw blades: 15 mm • Saw blade lubrication: pneumatic sprayers • Hydraulic saw blade tensioning • Manual setting marker Bwjdszqzgwjpfx Acgjr • Wheel diameter: 710 mm • Outfeed table length: 2.5 m • Double pressure rollers

Condition: repair required (used), functionality: not functional, Drilling machines for turned parts – TRIADE FIR-6 Bwodpfxozmxf Ao Acger Defective – PLC controller missing.

Condition: like new (used), Year of construction: 2007, HYUNDAI WIA KH63G - YOM 2008/ FIRST INSTALLED 2010 - SERIAL NUMBER G3641-071 MACHINE CONSTRUCTION & FEATURES • Twin Pallet Horizontal Machining Centre. • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle. • Shuttle Type Pallet Changer. • Pre-Tensioned Double Anchored Ballscrews. TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper #50,DIN 69871 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEAR FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type ISO 50, DIN69871 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415 V / 50 HZ / 3PH Bedpfx Aolrqiqscgjwr MACHINE Floor Space (L x W) 3,530 X 5,320 MM Height 3,106 MM Weight 14,000 KGS STANDARD SUPPLIED MACHINE FEATURES • Total Splash Guard • Door Interlock • APC (2 Pallets) • Remote MPG • Coolant Tank • Internal Chip Conveyor (2 Sets) • Work Light • Tapped Holes in Pallets • Levelling Pads and Bolts • Operation/Programming Manuals • Call Light • Selection of Spindle Tooling

Condition: ready for operation (used), Year of construction: 2006, Canol make up pastry line Canolino 5.2 highly specified make-up line for the production of puff pastry, yeast dough and Danish pastry. This Canol Canolino 5.2 is equipped with an independent dough calibrator, ensuring precise dough thickness and consistent product quality. Reliable industrial line suitable for a wide range of bakery products. year of build 2006 length overall: 678 cm conveyor belt width: 650 mm independent dough calibrator cutting station dosing machine with 4 dosing nozzles roll winder guillotine cutting knives, folding shoes etc. pictures BEFORE cleaning Bsdpjzd Tc Dsfx Acgjwr

Condition: good (used), Year of construction: 2002, functionality: fully functional, Stationary drilling machine for furniture components, for drilling rows of holes and hardware, with a drilling head for rows of holes and a drilling head for hardware, specifically for HETTICH hardware. - Drilling unit adjustable in depth This allows, for example, 2 rows of holes to be drilled in parallel without having to move the workpiece. - Drilling motor 1.1 kW, 2,820 rpm - Pneumatic feed via foot valve, stroke 90 mm - Stop system with folding stops - Pneumatic workpiece clamping - Quick-change system for drilling heads Existing drilling heads: - BKF-15/32 drilling head for rows of holes with 15 spindles, pitch 32 mm - 3-spindle drilling head for Hettich hardware Connection values: 400 V, 50 Hz, 3-phase Bwjdjzbh Htspfx Acgjr

Condition: used, Year of construction: 1997, travel distance X-axis: 1,300 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Mazatrol, overall weight: 36,000 kg, controller model: M-Plus, tool weight: 2,200 g, CNC Horizontal Machining Centre with Palletech Table size 800 x 800 mm. Table NCRT. Number of pallets 14. Movement x-Axis 1300 mm. y-Axis 1100 mm. z-Axis 1000 mm. Table indexing 0,001°. Number of tools in magazine 237 pieces. Maximum spindle speed 35-7.000 min. Tool taper DIN 69871A-50. CNC control M-plus If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock. Bwedpfx Aoy N A Euecgjr

Condition: used, Year of construction: 2001, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, total height: 3,050 mm, total length: 7,109 mm, total width: 7,805 mm, overall weight: 11,600 kg, table length: 500 mm, table width: 500 mm, controller model: Fusion 640 M, rotational speed (max.): 15,000 rpm, rotational speed (min.): 35 rpm, spindle speed (max.): 15,000 rpm, spindle speed (min.): 35 rpm, table load: 500 kg, Horizontal Machining Centre with Palletech CNC Control Mazatrol Fusion 640M Pallet table size 500 x 500 mm Number of pallets 10x Table load 500 kg Bwsdsy Nz Iuepfx Acgor Movement X-axis 710 mm Movement Y-axis 610 mm Movement Z-axis 660 mm Table indexing 360 x 1° Spindle Taper DIN 69871A Spindle speed 35 - 15.000 R/min Magazin capacity 120 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 2022, condition: refurbished (used), functionality: fully functional, LEONARDO has all the properties of the small, yellow LEO stretch robot, such as the small working area of 750 mm around a pallet, compact design and motorized drive. In addition, it offers an electronically adjustable film brake, up to 100% motorized film stretching and the patented push mast, which allows it a winding height of 2,350 mm - with a total height of only 1,560 mm when not in use. • Compact design: only 75 cm space required Bwsdpfx Aceih Srijgor • For pallets up to a maximum height of 2350 mm • Patented extension mast, from 1560 mm (at rest) to a maximum height of 2,350 mm • Electronically adjustable film brake, a motorized up to 100% • Electric maneuver (patent) that reduces the work area compared to other robots • 6 freely programmable programs (program memory) • Wide caliper strap • Electrically controlled steering • Maintenance-free battery (2 x 12 volts) • Charger: 220 volts integrated Pallet dimension: Length: min. 600 mm / max. without limit Width: min. 600 mm / max. without limit Height: min. 500mm / max. 2350mm Foil thickness of 8-30 my Pallet weight: min. 50 kg machine size: Height: 1,560 mm (resting state) Length: 1066mm Width: 738 mm Weight: 195 kg Battery for electric drive 24 V Built-in quick battery charger 230 V Warranty: 12 months (single-shift operation),

Condition: new, Year of construction: 2024, functionality: fully functional, SEMI-AUTOMATIC TURNTABLE, FOR PALLET WRAPPING WITH STRETCH FILM Bwsdpfx Ajxwa I Tocgjr Power Prestretch Pallet Wrapper from the UK agent for Noxon Upward-downward carriage speed Top and bottom reinforcement wraps Film tension Table rotation speed Ergonomic carriage stop at the end of the cycle Upward-downward cycle Only upward cycle Manual cycle Self learning cycle Altimeter and photocell delay 6 recordable programs N-Connect: remote wifi connection for machine total control

Condition: new, Year of construction: 2024, functionality: fully functional, Machine with frictioned roller carriage and tension adjusting of the film. The machine run with any type of stretch film. Completely mechanical driving, it doesn’t required any electric supply. Bsdjxwa H Njpfx Acgowr

Condition: as good as new (ex-display), 21-spindle single-head drilling machine, suitable for all carpentry needs, ideal for joining a work center to save time and release it from horizontal drilling operations. PNEUMATIC HEAD ROTATION - with lock and stop reference from 0° to 90°at any angle. SIDE REFERENCE FENCES - Adjustable cast iron fences on a metric scale thanks to a magnify glass and nonius. PATENTED SPIRAL SYSTEM - Device for boring depth adjustment, allowing an easy and quick set-up on a millimetric scale according to the different drill lengths. no of drilling spindles 21 # distance between drilling spindles 32 mm working width 640 mm max drilling depth 65 mm no. of pneumatic work piece clamps 2 # work piece dimensions max 900 x 3000 x 60 mm motor 1,5 kWm 50 Hz, 400 V, 2800 rpm pneumatic pressure requirement 6-8 bar compressed air consumption 10 l/cycle suction DM 80 mm Bwjdpfxsd Supge Acgsr machine dimensions L x W x H = 1030 x 1030 x 1285 mm weight 240 Kg

Condition: new, Year of construction: 2026, Pallet Wrapping Machine for 800x1200 mm Pallets – 1500 kg Capacity A pallet wrapping machine for 800x1200 mm pallets with a load capacity of 1500 kg is a universal and cost-effective solution for companies aiming to improve their packaging processes. This device combines high-quality construction, ease of use, and operational safety. It performs excellently across various industries – from food processing and manufacturing to logistics and e-commerce. Application – Wrapping Standard 1200x800 mm EURO Pallets The wrapper is specifically designed for standard EURO pallets (1200x800 mm), which are widely used in logistics and transportation. It’s ideal for use in: Warehouses and wholesale operations Manufacturing facilities Shipping and transport companies Distribution centers E-commerce businesses handling palletized shipments With a maximum load capacity of 1500 kg, the machine is suitable for wrapping both lightweight cartons and heavy industrial components. Advantages of the Pallet Wrapper – Efficiency and Cost Savings ✅ Stable Load Securing – Precise stretch film wrapping ensures complete protection of goods during transport. ✅ Material Savings – Even film tensioning reduces film consumption by up to 30%. ✅ User-Friendly Operation – An intuitive control panel allows quick and easy setup of wrapping parameters. Bwsdpfx Ajxnmhhjcger ✅ Versatility – Compatible with various film types: standard, pre-stretch, and high-flexibility stretch film. ✅ Robust & Safe Design – A durable platform and sturdy wrapping column enable stable operation with loads up to 1500 kg. Stretch Wrapping Machine – Alternative Names & Uses This machine is also commonly known as: Pallet wrapping machine Stretch film wrapper Automatic pallet wrapper Pallet stretch sealer Pallet packaging machine Regardless of the name, the purpose remains the same – effective securing of pallets and goods against damage during transport.

Condition: excellent (used), Year of construction: 2013, FOR SALE: ERLENBACH ESA 5 Cutting Line with VIRO PPZA-1300/6 Packaging Machine Technical Data and Year of Manufacture: -Erlenbach ESA 5: Year 2013 -VIRO PPZA-1300/6: Year 2011 -Condition: Used for less than one month (like new) -Maximum block dimensions (L × W × H): 5100 × 1260 × 1260 mm -Cutting speed: 1.5 m/min -Waste recycling system: top, bottom and side trimming waste grinder Additional Features: -Full Oscillating Wire Cutting on All Stations The machine is equipped with an oscillating wire system on every cutting station: -Horizontal cutting station: up to 61 oscillating wires Bwsdpfx Acsv Hm A Tsgsr -Vertical cutting station: up to 11 oscillating wires with oscillation system -Down-Cutter station (top-to-bottom package cutting): equipped with full wire oscillation -Automatic Wire Positioning Automatic wire positioning is available on the key cutting stations: -Horizontal cutting station -Down-Cutter station (top-to-bottom cutting) -Automatic Adjustment for 5 m and 4 m Blocks The machine is factory-designed to process both 5-meter and 4-meter EPS blocks. Automatic cylinder adjustment in the Down-Cutter station: When the operator selects either the 5-meter or 4-meter block option in the control menu, the machine automatically repositions the holding device and support barrier using a pneumatic cylinder. This ensures that the front side trimming waste produced during top-to-bottom cutting always falls precisely into the designated collection area. No manual adjustment is required.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, PAPERPLAST DRY 70 - 102, Samal 102X114, including 70 pallets of BOPP film. Year 2007 Currently in production in the UK Automatic thermal film laminator Automatic sheet feeder Vacuum infeed table Laminating unit with heated chrome cylinder ICS heating unit Sheet separation unit, pile delivery unit Usable working width (mm): 1020 Bjdpfx Aey Iy Nhecgjwr Minimum size (mm): 250 x 280 Maximum size (mm): 1020 x 1400 Mechanical speed: 70 m/min. Size: 102 mm x 116 mm Minimum size: 30 x 28 cm, speed up to 70 m/min. + approximately 70 pallets of film (list of offered films in the attachment).

Condition: excellent (used), I am offering a SANPACK FIX pallet wrapping machine designed for securing loads with stretch film during storage and transport. Bwodpfxozf Rkuj Acgsr Technical specifications: Manufacturer: Sanpack Model: SANPACK FIX Power supply: 3×380V + N + PE Frequency: 50 Hz Power: 0.55 kW Rated current: 2.0 A Protection rating: IP54 Advantages: Rotating pallet table Stretch film holder Robust industrial construction Control panel operation Ideal for warehouses, production facilities, and logistics centers Visual condition matches the photos. The machine is used.

Condition: used, Strip Straightening Machine for Coil Material WANZKE Type RG 400-7 Coil Processing Line REF No.: 1349-6 Year of manufacture: 1983 Nominal strip width: 400 mm Roll width: 408 mm Strip thickness: max. 2 mm Strip cross-section: max. 600 mm² Roll width, straightening rollers: 408 mm Number of straightening rollers (top): 3 (non-driven) Number of straightening rollers (bottom): 4 (driven) Straightening roller diameter: 50 mm Feed rollers: 2 pcs, Ø 50 mm (lower roller driven) Feed roller width (top): 390 mm Feed roller width (bottom): 408 mm Strip speed: approx. 5 - 45 m/min Motor power: 1.1 kW Power supply: 230 Volt, 50 Hz - Infinitely variable straightening speed via DC motor with DC controller - Drive via geared motor with chain drive - Loop control with speed regulation with 2 speed stages - Upper roller frame adjustable via 4 handwheels - 4 dial gauges for fine adjustment - Mechanical opening of the upper rollers via eccentric lever - Adjustable lateral strip guide at the infeed side - 2 roller baskets for strip guidance - Electrical diagram available Space required by straightener with control unit (L x W x H): 1200 x 800 x 1600 mm Weight: 620 kg Good condition Bwodpjxw Rcusfx Acgsr

Condition: used, Coil line – Uncoiler and Leveler Year of construction: 1991 Coil width: 50 to 450 mm Sheet thickness with inactive leveler: 6 mm Sheet thickness with active leveler: 2 mm Bwedpoif Sg Sjfx Acgsr - Very good condition and comprehensive operating instructions Space requirement of the entire system L x W: approx. 7000 x 3000 mm Weight of the entire system: approx. 11 tons Good condition Leveler HMS Type RS 47-04/1, Machine No. Coil width, nominal width: 400 mm Coil width, maximum passage width: max. 455 mm Coil thickness at 400 mm width: max. 1.5 mm (for steel) Coil thickness at 400 mm width: max. 2 mm (for copper) Speed: max. 40 m/min Number of leveling rolls: 7 pieces Leveling roll diameter: Ø 40 mm Number of tension rolls: 2 pieces Tension roll diameter: Ø 80 mm Infeed height, passage height: 1500 mm - Leveling rolls hardened, ground, and hard chrome-plated, with central support - Tension rolls hardened, ground, and hard chrome-plated, with hydraulic gap adjustment - Manual adjustment of the leveling rolls - Infeed guide with hydraulically extendable tongue and hydraulically adjustable idler roller - Adjustable lateral coil guide - All leveling rolls driven via distributor gearboxes with universal joints - Both tension rolls driven via gearboxes with universal joints - Frequency-controlled drive via geared motors - Leveler opening stroke 250 mm for cleaning the system or for processing thicker material, stroke movement via trapezoidal spindle - Ultrasonic loop control Transport dimensions L x W x H: 3600 x 2200 x 2200 mm Weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outer diameter: max. 1600 mm (with loading table) Coil outer diameter: max. 2000 mm (without loading table) Diameter of the coil inlet disc: Ø 1700 mm Coil inner diameter, spreading range: 460-520 mm Coil width, nominal width: max. 630 mm Width of the spreading jaws: 750 mm Height of the uncoiler arbor above the base plate: 1500 mm - Drive of the uncoiler arbor via hydraulic motor and gear - Pneumatic retarder brake on the uncoiler arbor TWINFLEX - Hydraulic spreading of the uncoiler arbor, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading table with 12 tons lifting capacity and 300 mm stroke - Uncoiler in an above-floor running frame with motorized transverse travel drive Transport dimensions L x W x H: 3500 x 1900 x 2500 mm Weight: approx. 5 tons Central hydraulic unit, separate Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 pumps REXROTH (tandem pump) - Oil cooler as an air heat exchanger with fan motor Transport dimensions L x W x H: 1600 x 850 x 1450 mm Weight: approx. 800 kg Electrical cabinet, separate - All cable connections are made via Harting connectors Transport dimensions L x W x H: 2800 x 500 x 2250 mm Weight: approx. 800 kg

Condition: used, Stretch blow molding machine by Etek ISBM line = Injection stretch blow molding Stretch blow molding machine for single-use PET bottles made from PET preforms Stretch blow molding machine for production using the rotary process Manufacturer: ETEK / GF-Industries, Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Mains connection: 400 volts, 50 Hz Weight: approximately 6000 kg In like-new condition Bedokucxlopfx Acgewr

Condition: excellent (used), For sale: professional pallet strapping system from the renowned German company ErgoPack. Model 725E is a fully electric device that facilitates safe and fast pallet strapping without the need for bending down – ideal for warehouses, logistics, and production environments. KEY ADVANTAGES - Automatic strap guiding around the pallet - 24V electric control - AUTO, MANUAL, SOFT operation modes - Adjustable strap tension - Maximum tensioning force up to 2500N - Ergonomic handling for operator comfort - Mobile, wheeled construction - Swiss quality craftsmanship (Swiss Made components) TECHNICAL DATA Bwedpsyw Iagsfx Acger Manufacturer: ErgoPack Deutschland GmbH Model: 725E Power supply: 24V DC Max strap tension: 2500N Condition: used, in good technical condition Charger included CONDITION The device is complete. Shows normal signs of use from operation. Control panel works, the machine is ready for use. APPLICATIONS - Warehouses - Logistics centers - Production - Pallet transport and packaging

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2426, Equipment: CE marking, Band Saw for Pallet Dismantling – VALTER BAND SAWS 1800 P-SP If you are looking for a robust and efficient industrial solution for cutting and dismantling standard or non-standard wooden pallets, this is the ideal machine. *Work Table Dimensions: 1800 x 2000 mm *Horizontal Cutting Capacity: 1500 mm *Vertical Cutting Capacity: 150 mm *Blade-to-Column Distance: 490 mm *Blade Motor Power (with brake): 10 HP *Blade Speed: 400 m/min *Automatic hydraulic blade tensioner with safety limit switch *Hydraulic Oil Tank Capacity: 30 liters (1 HP pump motor) *Operating Pressure: 40 bar *Total Machine Weight: 2000 kg *Electrically welded steel structure with vertical movement via ball-recirculating linear guides for straight, uniform, and precise feed: *Micro-mist oil blade lubrication system (prepared for compressed air connection) to maximize blade life. *Tungsten carbide blade guide adjustable according to the type of pallet being processed. *Also prepared for dust extractor connection. *Dual Operator Station: Designed for safe operation with 2 operators (one for loading and one for unloading with a dedicated emergency stop button). CE CERTIFIED SAFETY The machine is equipped with advanced active and passive protection systems: *Self-braking motor that stops the blade in less than 5 seconds (3 seconds at maximum speed). *Safety microswitches in case of blade breakage or guard opening. Bedpfezh Hrmex Acgswr *Electronic device against excessive motor strain. *Low-voltage controls and dual emergency stop buttons. Machine can be viewed by appointment. Price is ex-works, with transportation costs borne by the buyer.

Condition: used, Year of construction: 1999, Rondo Doge Rondolino make up pastry line Bedpsxvx Tfsfx Acgowr year of build 1999 table length overall 380cm conveyor belt width 635mm cutting station filling depositor guillotine ZGM635.A pictures BEFORE cleaning

Year of construction: 2006, condition: used, edge thickness (max.): 12 mm, feed rate X-axis: 40 m/min, plate height: 60 mm, plate length: 2,400 mm, plate width: 1,000 mm, machine/vehicle number: 0-202-48-1184, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! The machine package consists of four machines, composed as follows: Pos. 1 - KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cups Pos. 2 - HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Adhesive system: PUR, laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Panel length max.: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Pre-milling cutter Corner rounding unit Grooving unit Pressing system Panel support guides Positioning via NC Alignment system for panel infeed Panel formatting/milling units Unit 1: Pre-milling unit Automatically timed engagement Positioning via NC unit Unit 2: Double cutter, top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm Positioning via NC Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatically timed engagement Positioning via NC Gluing and edge system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating the panel side Edge processing units Number of edge processing units: 8 Edge processing unit 1: Trimming unit Number of motors: 2 Positioning via NC Edge processing unit 2: Rough milling, top and bottom Number of motors: 2 Edge processing unit 3: Fine milling for flush and radius milling Number of motors: 2 Positioning via NC Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool change Bwodpoy Ur Hlefx Acgjr Positioning via NC Edge processing unit 5: Milling/chipping unit Number of motors: 1 Motor power Unit 5: 12 kW Speed Unit 5: 10,000 rpm Automatic tool change Positioning via NC Edge processing unit 6: Edge smoothing blade Positioning via NC Edge processing unit 7: Glue application blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Pos. 3 - KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cup system Pos. 4 - LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Panel return system for edge banding machine Panel width max.: 1,000 mm Panel length max.: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8522

Condition: used, Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 8,000 rpm, spindle nose: BT-40, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with pallet changer on moving column (ROTOPALLET) with spindle line and spindle motor fully refurbished as new. CNC SIEMENS 840D. Tool magazine with 40 positions. Chip conveyor. High-pressure pump through the spindle. Spindle cooler. Remote electronic handwheel. Bwjdpfx Ajydhyxecger

Condition: ready for operation (used), functionality: fully functional, The Wolfking TSM 400L paddle mixer is designed to ensure consistent and homogeneous mixing of meat preparations in an industrial setting. With its 400-liter bowl, it is capable of handling large batches while offering excellent process control. This results in improved production stability and efficiency. Additionally, Wolfking’s engineering guarantees the robustness required for high-throughput operations. This model delivers 6.0 kW of power and operates at 380 V – 50 Hz, ensuring stable performance in continuous production environments. Its rated current of 15.6 A allows for safe integration into standard industrial installations. Furthermore, the IP65 protection rating safeguards electrical components against splashes and simplifies maintenance, making the equipment ideal for food processing facilities. Weighing 800 kg, the TSM 400L features a stable, heavy-duty build, keeping vibrations under control during operation. Danish industrial construction further ensures long service life, making this a secure, long-term investment. Offered by Europ’Équipement, this Wolfking TSM 400L mixer is fully identified via its manufacturer’s plate and is inspected prior to commissioning. This guarantees the buyer a traceable, immediately operational machine. Moreover, purchasing used equipment reduces investment costs while providing a high-performance solution. Technical specifications: Year: 1996 Machine number: 58248 Bjdpfxsyw R S Es Acgewr Bowl capacity: 400 L Motor power: 6.0 kW Power supply: 380 V Frequency: 50 Hz Current: 15.6 A Protection class: IP65 Weight: 800 kg Marking: CE 96

Condition: good (used), ErgoPack 712E Pallet Strapping Machine Bjdpfx Aszdauhecgowr A device for strapping loads with PP and PET straps Manufactured in 2016 Very good condition Model 712E with a heat sealer and a „tail” that passes through the pallet and feeds the strap to the operator without bending down. Manufacturer’s description: The ErgoPack 712 E is used to strap almost any type of load using PP (polypropylene) or PET (polyester) strap. The device is fully automatic (tensioning, sealing, and cutting the strap). It is characterized by high efficiency and ease of use, ensuring excellent results with minimal physical effort. The device is controlled from a control panel. Includes documentation, a charger, and a tool kit.