Used Della Toffola Lt6 for sale (105)

Condition: new, Year of construction: 2024, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,130 mm, · Maximale seitliche Reichweite 3.30 m · Reichweite bei max. Hubhöhe 0.50 m · Ausbrechkraft mit Schaufel 4205 daN · Überhang vorne 0.99 m · Schüttwinkel 117 ° · Kippwinkel 12 ° · Wenderadius (über Räder) 3.31 m · Antriebsräder (vorne / hinten) 2 / 2 · Lenkräder (vorne / hinten) 2 / 2 · Heben 7.30 s · Senken 4.95 s · Teleskop ausfahren 5.20 s · Teleskop Einfahren 3.70 s · Ankippen 3.20 s · Auskippen 3.20 s · Motor: Kubota, Motornorm, Stage V · Motor Modell V3307-CR-T-E5B · Anzahl der Zylinder - Tragfähigkeit der Zylinder4 - 3331 cm³ · Nennleistung Verbrennungsmotor / Leistung 75 Hp / 55.40 kW · Max. Drehmoment / Motordrehzahl 265 Nm @1400 rpm · Zugkraft 3240 daN · Wendelüfter Standard · Kühlsystem des Motors 2 Wasserkühler + Hydrauliköl · Getriebetyp: Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 · Max. Fahrgeschwindigkeit (kann je nach Vorschriften variieren) 25 km/h · Differenzialsperre Sperrdifferenzial an der Vorderachse · Parkbremse: Automatische negative Parkbremse · Festellbremse Ölbad Lamellenbremsen an den Vorderachsen · Pumpenart: Zahnradpumpe · Hydraulikfördermenge - Hydraulikdruck: 86 l/min - 235 bar · Fassungsvermögen des Kraftstofftanks: 63 l Dcodexd Hv Dopfx Ahgei · Schallpegel (LpA) gemäß Norm NF EN 12053 geprüft: 76 dB · Umgebungsgeräusch (LwA) 104 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Sicherheit Zulassung der Kabine: Kabine ROPS - FOPS Stufe 1 · Steuerungen: JSM

Condition: new, Year of construction: 2024, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,130 mm, · Maximale seitliche Reichweite 3.30 m · Reichweite bei max. Hubhöhe 0.50 m · Ausbrechkraft mit Schaufel 4205 daN · Überhang vorne 0.99 m · Schüttwinkel 117 ° · Kippwinkel 12 ° · Wenderadius (über Räder) 3.31 m · Antriebsräder (vorne / hinten) 2 / 2 · Lenkräder (vorne / hinten) 2 / 2 · Heben 7.30 s · Senken 4.95 s · Teleskop ausfahren 5.20 s · Teleskop Einfahren 3.70 s · Ankippen 3.20 s · Auskippen 3.20 s · Motor: Kubota, Motornorm, Stage V · Motor Modell V3307-CR-T-E5B · Anzahl der Zylinder - Tragfähigkeit der Zylinder4 - 3331 cm³ · Nennleistung Verbrennungsmotor / Leistung 75 Hp / 55.40 kW · Max. Drehmoment / Motordrehzahl 265 Nm @1400 rpm · Zugkraft 3240 daN · Wendelüfter Standard · Kühlsystem des Motors 2 Wasserkühler + Hydrauliköl · Getriebetyp: Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 · Max. Fahrgeschwindigkeit (kann je nach Vorschriften variieren) 25 km/h · Differenzialsperre Sperrdifferenzial an der Vorderachse · Parkbremse: Automatische negative Parkbremse Dcodoxd Huaepfx Ahgoi · Festellbremse Ölbad Lamellenbremsen an den Vorderachsen · Pumpenart: Zahnradpumpe · Hydraulikfördermenge - Hydraulikdruck: 86 l/min - 235 bar · Fassungsvermögen des Kraftstofftanks: 63 l · Schallpegel (LpA) gemäß Norm NF EN 12053 geprüft: 76 dB · Umgebungsgeräusch (LwA) 104 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Sicherheit Zulassung der Kabine: Kabine ROPS - FOPS Stufe 1 · Steuerungen: JSM

Condition: new, Year of construction: 2024, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,200 mm, · Maximale seitliche Reichweite 3.30 m · Reichweite bei max. Hubhöhe 0.50 m · Ausbrechkraft mit Schaufel 4205 daN · Überhang vorne 0.99 m · Schüttwinkel 117 ° · Kippwinkel 12 ° · Wenderadius (über Räder) 3.31 m · Antriebsräder (vorne / hinten) 2 / 2 · Lenkräder (vorne / hinten) 2 / 2 · Heben 7.30 s · Senken 4.95 s · Teleskop ausfahren 5.20 s · Teleskop Einfahren 3.70 s · Ankippen 3.20 s · Auskippen 3.20 s · Motor: Kubota, Motornorm, Stage V · Motor Modell V3307-CR-T-E5B · Anzahl der Zylinder - Tragfähigkeit der Zylinder4 - 3331 cm³ · Nennleistung Verbrennungsmotor / Leistung 75 Hp / 55.40 kW · Max. Drehmoment / Motordrehzahl 265 Nm @1400 rpm · Zugkraft 3240 daN Dodpfxoxd Htis Ahgeci · Wendelüfter Standard · Kühlsystem des Motors 2 Wasserkühler + Hydrauliköl · Getriebetyp: Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 · Max. Fahrgeschwindigkeit (kann je nach Vorschriften variieren) 25 km/h · Differenzialsperre Sperrdifferenzial an der Vorderachse · Parkbremse: Automatische negative Parkbremse · Festellbremse Ölbad Lamellenbremsen an den Vorderachsen · Pumpenart: Zahnradpumpe · Hydraulikfördermenge - Hydraulikdruck: 86 l/min - 235 bar · Fassungsvermögen des Kraftstofftanks: 63 l · Schallpegel (LpA) gemäß Norm NF EN 12053 geprüft: 76 dB · Umgebungsgeräusch (LwA) 104 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Sicherheit Zulassung der Kabine: Kabine ROPS - FOPS Stufe 1 · Steuerungen: JSM

Condition: new, Year of construction: 2024, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,130 mm, · Maximale seitliche Reichweite 3.30 m · Reichweite bei max. Hubhöhe 0.50 m · Ausbrechkraft mit Schaufel 4205 daN · Überhang vorne 0.99 m · Schüttwinkel 117 ° Dsdpfx Ahsxd Htcsgoci · Kippwinkel 12 ° · Wenderadius (über Räder) 3.31 m · Antriebsräder (vorne / hinten) 2 / 2 · Lenkräder (vorne / hinten) 2 / 2 · Heben 7.30 s · Senken 4.95 s · Teleskop ausfahren 5.20 s · Teleskop Einfahren 3.70 s · Ankippen 3.20 s · Auskippen 3.20 s · Motor: Kubota, Motornorm, Stage V · Motor Modell V3307-CR-T-E5B · Anzahl der Zylinder - Tragfähigkeit der Zylinder4 - 3331 cm³ · Nennleistung Verbrennungsmotor / Leistung 75 Hp / 55.40 kW · Max. Drehmoment / Motordrehzahl 265 Nm @1400 rpm · Zugkraft 3240 daN · Wendelüfter Standard · Kühlsystem des Motors 2 Wasserkühler + Hydrauliköl · Getriebetyp: Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 · Max. Fahrgeschwindigkeit (kann je nach Vorschriften variieren) 25 km/h · Differenzialsperre Sperrdifferenzial an der Vorderachse · Parkbremse: Automatische negative Parkbremse · Festellbremse Ölbad Lamellenbremsen an den Vorderachsen · Pumpenart: Zahnradpumpe · Hydraulikfördermenge - Hydraulikdruck: 86 l/min - 235 bar · Fassungsvermögen des Kraftstofftanks: 63 l · Schallpegel (LpA) gemäß Norm NF EN 12053 geprüft: 76 dB · Umgebungsgeräusch (LwA) 104 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Sicherheit Zulassung der Kabine: Kabine ROPS - FOPS Stufe 1 · Steuerungen: JSM

Condition: new, M&S Gruseck GmbH NEW Screening Drums from the Market Leader - 100% MADE IN GERMANY! Screening drum suitable for a Terra Select T60 Square staggered perforation (QV) 15mm Sheet thickness = 6mm !!! Over 500 screening drums manufactured per year speak for themselves !!! - Premium quality! - Thoroughly inspected! Perfect running accuracy in operation! - Best price-performance ratio - Short delivery times! - Precision-punched perforations for perfect screening results! - Various perforations available (square, round, honeycomb, and more)! - Narrow bridges for optimal screening area! - Different sheet thicknesses! - Various materials possible (at least S355)! - Special customer requests are not a problem for us but our specialty! - All drums are coated! Dedpoxny Egofx Ahgeci - Large stock selection! - Suitable for all common screening machines!

Condition: new, M&S Gruseck GmbH NEW Screening Drums from the market leader – 100% MADE IN GERMANY! Screening drum suitable for a Terra Select T60 Square staggered perforation (QV) 20mm Sheet thickness = 6mm !!! Over 500 screening drums produced per year speak for themselves !!! - Premium quality! - Always quality-checked! True running in operation! Djdpfx Aexny Hqjhgsci - Best price-performance ratio - Short delivery times! - Stamped perforations for perfect screening results! - Various perforation types (square, round, honeycomb, etc.)! - Narrow bridges for optimal screen surface area! - Various sheet thicknesses! - Different materials possible (at least S355)! - Special customer requests are no problem for us—they are our specialty! - All drums are painted! - Large inventory available! - Suitable for all standard screening machines!

Condition: new, Year of construction: 2024, Basic configuration Laser source: Raycus Laser head: Raytool Autofocus Servo: Yaskawa System: FSCUT 5000 A Loading: manual Structure: 3 horizontal chucks CAD CAM: TubesT, TubePro Dcjdpfx Ahsmx R S Nsgji Smoke extractor: Topsin 7.5kW with 6 filters Tube diameter: 15-350mm tube length: 0-4000/0-6000mm Maschinengröße: 13500x3400x2400mm

Year of construction: 1993, condition: ready for operation (used), A complete paint shop is available. 1) Sergiani S.p.A. Monomatic S, year of construction: 2001. 2) Finnrose FLT 6, year of construction: 1993. 3,4,5) Three identical Bürkle DAL1-1300 presses, year of construction: 1993. 6) Karl Heesemann FGA 6 EX, year of construction: 1993. 7) Finnrose FLT-4.5, year of construction: 1993. 8) Bürkle DAL2-1300, year of construction: 1985. Hackemack KTR 2040, year of construction: 1996. All machines are part of a paint shop. On-site inspection is possible. Dsdpfx Ajtpp H Ejhgoci

Condition: good (used), functionality: fully functional, power: 91 kW (123.73 HP), fuel type: diesel, lifting power: 3,400 kg/m, lifting height: 6,000 mm, Year of construction: 2003, operating hours: 4,173 h, Equipment: additional headlights, air conditioning, all wheel drive, cabin, pallet forks, trailer coupling, Telescopic Loader MANITOU MLT 634-120 LSU Year of manufacture: 2003 According to hour meter: 4,173 operating hours 6 meter lift height 3.4 ton lifting capacity 90.5 kW Perkins engine 4-speed powershift transmission - incl. pallet forks - mechanical quick coupler - additional hydraulic circuit to carriage - all-wheel drive - 3 steering modes - joystick control - lighting system with indicators - cabin with heating and air conditioning - immediately ready for use Sale price: 23,900,-- EUR net Affordable delivery possible! New bucket available for surcharge! Dsdpfsyv E Ixjx Ahgeci

Condition: ready for operation (used), functionality: limited functionality, power: 74 kW (100.61 HP), fuel type: diesel, empty load weight: 6,450 kg, lifting power: 3,000 kg/m, lifting height: 6,000 mm, Year of construction: 2004, Equipment: additional headlights, all wheel drive, cabin, standard shovel, trailer coupling, Telescopic Loader MANITOU MLT 630 Turbo Year of manufacture: 2004 Operating hours are unknown as the counter is non-functional! 101 HP Perkins engine 4-speed powershift transmission 3-ton lifting capacity 6-meter lifting height - NEW BUCKET - mechanical quick coupler - auxiliary hydraulic circuit up to the fork carriage - all-wheel drive - 3 steering modes - joystick control - cab with heating - lighting system with indicators - ready for immediate use! - original paint! - good tires! - incl. CE certification - incl. Belgium road registration Dcodpsyf Abyofx Ahgji Sale price: €23,500 net, incl. new bucket as shown in the photos! Pallet forks or light material bucket available at additional cost! Affordable delivery possible!

Condition: reconditioned (used), Hako Jonas / Sweepmaster B 980 R Factory-refurbished sweeper with complete lighting package, 6-month warranty, and new DGUV V3 inspection including test report. Working width with two side brushes: 120 cm Central brush: 70 cm Maximum area performance: 5,800 m²/h Container capacity: 60 l Drive type: Battery Battery V/Ah: (24V) 4x 6V 240Ah GEL Installed new parts / conducted repairs: - All drive belts replaced - All ball bearings replaced - New GEL batteries - Heavy-duty wheels replaced - All rubber strips replaced - Box filter replaced - Drive motor (roller and side brushes) completely overhauled - Traction motor completely overhauled - Sweeping unit completely overhauled Dcsdpfsr E D Dcsx Ahgsi In addition, we offer: Service, repairs, and sales for all common Hako models.

Condition: refurbished (used), Year of construction: 2012, operating hours: 2,134 h, Hako Scrubmaster B45 TB 510 Refurbished scrubber-dryer with new batteries, new suction turbine, and more – includes 6 months warranty and new DGUV V3 electrical inspection with test certificate. Working width without suction bar: 51 cm Working width with suction bar: 86 cm Dedpfou Sr U Nsx Ahgoci Max. area performance: 2000 sqm/h Fresh water tank: 45 L Recovery tank: 45 L Drive type: Electric 24V Battery: 2 x 12V 85Ah GEL batteries Installed new parts / repairs carried out: - Suction motor 24V 400W new - 2 x 12V 85Ah GEL batteries new - Brush deck / brush motors overhauled including new ball bearings, carbon brushes, and bumper strip - All hoses new - Disc brushes new - Support wheels new - Squeegee blades new - Fresh water filter new Additionally, we offer: Servicing, repair, and sales for all common Hako models.

Condition: refurbished (used), Year of construction: 2020, operating hours: 1,181 h, functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, input voltage: 24 V, water tank capacity: 42 l, battery voltage: 24 V, battery capacity: 105 Ah, brushing unit diameter: 510 mm, operation weight: 230 kg, Hako Scrubmaster B45 CL TB 510 Refurbished scrubber-dryer with new batteries, new suction turbine, and more – includes 6 months warranty and a new DGUV V3 electrical inspection with test certificate. Working width without squeegee: 51 cm Working width with squeegee: 86 cm Max. area performance: 2,700 m²/h Fresh water tank: 45 L Recovery tank: 45 L Drive: Yes Drive type: Electric 24V Battery: 2 x 12V 105 Ah GEL batteries Dcsdpjyanpfsfx Ahgji Installed new parts / performed repairs: - Suction motor 24V 400W (new) - 2 x 12V 105 Ah GEL batteries (new) - Brush deck / brush motors reconditioned incl. new ball bearings, carbon brushes, and bumper bar - All hoses replaced (new) - Disc brushes (new) - ACLA rubber wheels (new) - Squeegee rubbers (new) - Fresh water filter (new) In addition, we offer: Service, repair, and sales for all common Hako models.

Condition: refurbished (used), Year of construction: 2011, operating hours: 818 h, Hako Scrubmaster B45 TB 430 with On-Board Chemical Dosing. Refurbished scrubber-dryer with new batteries, new suction turbine, and much more – includes 6 months warranty and new DGUV V3 electrical safety inspection with test report. Working width without squeegee: 43 cm Working width with squeegee: 76 cm Dcodpsu Stndsfx Ahgei Maximum area coverage: 1,700 sqm/h Fresh water tank: 45 L Recovery tank: 45 L Traction drive: Yes Drive type: Electric 24V Battery: 2 x 12V 85Ah GEL batteries Installed new parts / Performed repairs: - New suction motor 24V 400W - 2 x 12V 85Ah GEL batteries (new) - Brush deck / brush motors overhauled including new ball bearings, carbon brushes, and bumper strip - All hoses replaced (new) - New disc brushes - New ACLA rubber wheels - New squeegee blades - New fresh water filter In addition, we offer: Service, repairs, and sales for all common Hako models.

Condition: refurbished (used), Year of construction: 2014, Hako Scrubmaster B70 CL Completely refurbished scrubber-dryer with new batteries, new suction turbine, and much more – comes with a 6-month warranty and a new DGUV V3 electrical inspection including inspection report. Working width without squeegee: 65 cm Working width with squeegee: 95 cm Maximum area performance: 3,200 m²/h Fresh water tank: 72 L Recovery tank: 74 L Traction drive: Yes Drive type: Electric 24V Battery: 4 x 6V 180 Ah GEL batteries Installed new parts / repairs carried out: - 24V 600W suction motor – new Dcjdpfx Aetthfvohgsi - 4 x 6V 180 Ah GEL batteries – new - Brush deck / brush motors overhauled including new ball bearings, carbon brushes, and bumper strip - All hoses – new - Disc brushes – new - ACLA rubber wheels – new - Suction lips – new - Fresh water filter – new Additionally, we offer: Service, repairs, and sales for all common Hako models.

Condition: refurbished (used), Year of construction: 2019, operating hours: 1,665 h, working width: 850 mm, area performance: 4,200 m²/h, overall weight: 393 kg, type of input current: DC, input voltage: 24 V, tank capacity: 74 l, water tank capacity: 72 l, battery capacity: 180 Ah, operation weight: 393 kg, Hako Scrubmaster B70 CL Refurbished scrubber-dryer with new batteries, new suction turbine, and much more – includes 6-month warranty and new DGUV V3 electrical inspection with inspection protocol. Working width without squeegee: 85 cm Working width with squeegee: 110 cm Max. area coverage: 4,200 sqm/h Fresh water tank: 72 L Recovery tank: 74 L Drive system: Yes Safety key: Yes Drive type: Electric 24V Battery: 4 x 6V 180 Ah GEL battery New components installed / repairs carried out: - Suction motor 24V 600W new - 4 x 6V 180 Ah GEL batteries new Dcsdpsyanhbjfx Ahgji - Brush deck / brush motors overhauled (including new ball bearings, carbon brushes, and bumper strip) - All hoses new - Pad brushes new - ACLA rubber wheels new - Squeegee lips new - Fresh water filter new Additionally, we offer: Service, repair, and sales for all common Hako models.

Condition: new, functionality: fully functional, mileage: 0 km, color: red, empty load weight: 2,050 kg, maximum load weight: 650 kg, lifting height: 3,330 mm, digging bucket width: 1,160 mm, Year of construction: 2025, Equipment: pallet forks, standard shovel, TECHNICAL DATA: Model: VOLT 600 Payload (kg): 650 Dcedpfx Aow Ufplohgji Unladen weight (kg): 2050 Bucket volume (m³): 0.25 Maximum steering angle: ±45° Turning radius (mm): 2050 Rear axle oscillation angle: 19° Full cycle time (s): 8 Operating time (h): 6 Speed (km/h): Slow: 10 km/h, Fast: 20 km/h Dumping height (mm): 2170 Lifting height (mm): 3330 Dimensions (mm): 3810 × 1260 × 2270 Dumping reach (mm): 405 Bucket width (mm): 1160 Wheelbase (mm): 1380 Track width (mm): 890 Ground clearance (mm): 200 BATTERY: Model: 3-EVF-200 Type: Maintenance-free lead-acid battery Quantity: 12 Capacity (kW): 14.4 Nominal voltage (V): 72 Charging time (h): 8 System voltage (V): 12 Electrical system: AC MOTOR: Voltage (V): 72 Power (kW): 5 Displacement (ml/r): 23 Nominal speed (rpm): Slow: 800 rpm Fast: 2200 rpm System pressure (MPa): 16 Hydraulic system: Steering type: Fully hydraulic steering System pressure (MPa): 14 Steering pump: 5–125 Cylinder size (mm): 63 × 190 mm Number of cylinders: 1 DRIVE: System: AC Voltage (V): 72 Power (kW): 4 × 2 Number of motors: 2 Tyres: 26×12.00–12 Tyre pressure (MPa): 0.25 PRICE: €14,500 net €17,255 gross KINGWAY DEUTSCHLAND is the exclusive stationary distributor of the Kingway brand in Germany. Here you can inspect and test all machines on-site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a vast selection of machines in stock, with around 100 units available at any given time. We deliver machinery throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and provide our customers with access to all spare parts as well as a mobile service. KINGWAY DEUTSCHLAND e. K. Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: good (used), Year of construction: 2001, machine/vehicle number: 169134, MANITOU MLT629-120 4WD Loader No. 169134 Dcodpfjwhccdox Ahgji 87.6 kW 2001

Condition: new, functionality: fully functional, power: 105 kW (142.76 HP), color: other, Year of construction: 2026, Equipment: cabin, CONSTMACH Compact-60 is a fully automatic compact concrete plant specially designed for projects requiring high production performance in limited spaces. Despite its compact design, it meets the needs of medium and large-scale projects with a production capacity of 60 m³/h. Thanks to its modular and ergonomic design, it requires minimal site preparation; it can be easily installed on a flat surface. The aggregate bunker can be positioned in a linear arrangement as in stationary concrete plants or in a square layout as in mobile plants. When the square bunker option is chosen, the Compact-60 can be transported in a single 40 ft. OT container, offering significant advantages in transportation and installation costs. Manufactured in compliance with CE standards, the Compact-60 offers a long-lasting and low-maintenance system thanks to its high-quality components. Complex automation processes are fully automated using SIEMENS – SCHNEIDER brand electronic components and advanced PLC control systems. The user-friendly software interface allows for easy control at every stage of the production process. The Compact-60 delivers high performance in ready-mix concrete, dry concrete, or precast production with twin-shaft, single-shaft, pan, or planetary mixer options. Belted Compact-60 - Compact Concrete Plant Technical Specifications Production Capacity: 60 m³/h Transport Position Dimensions: 13 (L) x 2.3 (W) x 2.3 (H) m (square bunker) Weight: 28 tons Total Motor Power: 105 kW Required Generator Power: 125 kVA Mixer Options: Pan – Single Shaft – Twin Shaft – Planetary Working Area: 300 m² Aggregate Storage Bunker: 4 x 15 m³ Aggregate Weighing Bunker: 1.5 m³ Aggregate Weighing Belt: 800 x 11,100 mm Aggregate Transfer Belt: 800 x 22,000 mm Mixer Wet Concrete Volume: 1 m³ Cement Weighing Bunker: 600 kg Water Weighing Bin: 300 liters Additive Weighing Bin: 20 liters Air Compressor: 300 liters – 5.54 kW Cement Silo: 50 – 500 ton capacity options Control Type: Fully Automatic Why Choose the Belted Compact-60 | Compact Concrete Plant? CONSTMACH Belted Compact-60 offers solutions to all the requirements of modern construction sites with its compact design and high production efficiency. Its easy transportability, low operating cost, and quick installation feature provide investors with time and cost advantages. European-made components used in all electrical and automation systems guarantee a long-lasting and reliable production process. Manufactured with CONSTMACH's more than 20 years of engineering experience in the industry, the Compact-60 is the smartest choice that combines quality, durability, and performance. What Do We Do as Constmach? Dcjdsxphlkepfx Ahgsi Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, functionality: fully functional, Year of construction: 1972, CALANDRA usata MOTORIZZATA MECCANICA A 3 RULLI SUPERIORE DA 140mm,SERTOM da 2000x5mm.REVISIONATA CON MESSA A NORMA E PERIZIA INGEGNERE DELLA SICUREZZA, PRONTA A MAGAZZINO PER VISIONE E PROVA.DIM. 3500*1000*1200H PESO CIRCA KG. 1600. Dedpfozh Dhxsx Ahgsci

Condition: used, functionality: fully functional, POSIZIONATORE usato DI SALDATURA MECOME TRK 150.CON CONTROPUNTA PNEUMATICA E SUPPORTO DELLA TORCIA REGOLABILE. SARA' FORNITO CON MODELLO DEL TUTTO NUOVO. Dcodpfxszhucaj Ahgji

Condition: used, functionality: fully functional, FRESATRICE usata A TESTA VELOCE LAGUN ISO 40 CON TESTA UNIVERSALE.CON ANCHE L' ACCESSORIO DELLA TESTA UNIVERSALE "TIPO HURON". Dimensioni tavola 1370x280 mm Cave a T n. 3 Corsa asse X 850 mm Dedpszht N Sofx Ahgsci Corsa asse Y 350 mm Corsa asse Z 400 mm Corsa slittone 570 mm Attacco cono mandrino ISO 40 Corsa canotto mm 127 Diametro canotto mm 86 Velocità mandrino Rpm 60-4200 Rpm Inclinazione testa destra sinistra 90 gradi Inclinazione testa avanti indietro 45 gradi Motore principale 4 Hp Peso massimo sopportabile sulla tavola 250 Kg Peso netto approssimativo 1650 Kg

Condition: used, functionality: fully functional, mileage: 187,040 km, first registration: 07/2019, fuel type: diesel, Year of construction: 2019, operating hours: 1,160 h, IVECO EUROCARGO 180-280 with SERMAC 20m concrete pump Dsdpfozkanmex Ahgjci First registered on 17/07/2019 - Euro 6 187,040 km SERMAC equipment: 4ZR20 model with 180 mm outlet – 20 m boom 1,160 operating hours Tires: 60-70% tread remaining Valid inspection certificate Good condition Available immediately WE WILL CONSIDER TRADING IN VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, OR KOMATSU.

Condition: used, functionality: fully functional, mileage: 351,944 km, first registration: 01/2008, fuel type: diesel, Year of construction: 2008, operating hours: 2,094 h, IVECO TRAKKER 450 with CIFA concrete mixer Registered in 2008 - Euro 5 351,944 km 4 axles CIFA SRY1300 equipment – Auxiliary engine 2094 operating hours Tires: 60/70% remaining Valid inspection certificate Good condition Dcjdpfx Ahszi Sfbjgsi Available immediately WE WILL CONSIDER TRADES OF VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, OR KOMATSU.

Condition: used, functionality: fully functional, mileage: 278,966 km, first registration: 07/2026, Year of construction: 2012, MERCEDES BENZ Actros 4144 B with Putzmeister 28m concrete pump First registered on December 7, 2012 – Euro 5 Mileage: 278,966 km Equipment: Putzmeister TMP 28-4.89S 28m 125mm Operating hours: 3,493 Dcsdpfozim Nusx Ahgei Tires: 50-60% tread Good condition Available immediately WE CONSIDER TRADES OF VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, OR KOMATSU.