Used Cooling Incubator for sale (7,655)

Year of construction: 2024, operating hours: 2 h, condition: new, functionality: fully functional, For sale is an as-new spiral cooling tower made of stainless steel 304. As a precautionary measure, the basket was completely shot-blasted, and every single stainless steel component was pickled and then hand-polished. All screws and nuts have been replaced with new ones, all shafts have been replaced with stainless steel, and all ball bearings have also been replaced with stainless steel deep groove ball bearings. Replacement motors (drive for the basket and for the modular belt), as well as approximately 20 meters of modular belt, are included as spares. Total modular belt width: approx. 340 mm, blue area width approx. 280 mm, outer side areas on the right and left made of stainless steel. Pedpfx Aeyvrvpsl Nopu Total belt length: 100 m. Number of tiers: 9. Spacing between each tier: 105 mm. Overall tower height: 2060 mm. Overall length incl. discharge belt: approx. 4000 mm; discharge section: approx. 2000 mm; total width: 2235 mm; running surface inner width: 370 mm; running surface outer width: 465 mm. Modular belt is made of stainless steel and POM. This spiral cooling tower also comes with a Z-belt. The Z-belt shown is for reference only and is not the original.

Condition: good (used), Year of construction: 2002, Screw compressor, water-cooled, manufactured by BOGE, type: SO150, year of manufacture: 2002. Final compression pressure: 10 bar, motor power: 110 kW. Ppjdpoh Hi Insfx Al Nju Includes refrigerant dryer. Dimensions: Length 3.5 m, width 1.5 m, height 1.7 m, weight approximately 3200 kg. Documentation available.

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Manufacturer: Brinkmann Pumps, coolant pump from Matsuura MC 710V milling machine -Type: TB13/110-B6X Podpfx Ajy Tuvmsl Nopu -Power: 0.4 kW -Flow rate: 12 l/min -Dimensions: see photos -Dimensions: 175/155/H330 mm -Weight: 8 kg

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Manufacturer: Shibaura, Coolant pump from Matsuura MC 710V milling machine -Type: OPSI-180W Ppedpfx Ajgx Amrsl Nju -Power: 180 W -Flow rate: 39/53 l/min -Bolt circle: Ø 160 x 10 mm -Dimensions: 200/270/H370 mm -Weight: 13.3 kg

Condition: used, Year of construction: 2007, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, type of cooling: water, Equipment: type plate available, Technical specifications: see nameplate (Figure 7) Dimensions: 1000 x 1000 x 1300 mm (L x W x H) The machine can be tested and demonstrated live on-site. All information is subject to change without notice. Subject to prior sale. Ppedpfx Aewmptyjl Nsu

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, pump -Manufacturer: Siemens - Schuckert, cooling water pump type W28/270 Pedshu Hw Aspfx Al Nopu -Power: 0.2 kW / 2840 rpm -Immersion depth: 265 mm -Dimensions: 320/190/H480 mm -Weight: 12.8 kg

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Coolant pump: Coolant pump -Engine: Cantoni 3.0 kW -Immersion depth: 450 mm -Overall dimensions: 500/340/H880 mm Ppedpfx Ajv Iyl Rel Nsu -Weight: 74 kg

Condition: good (used), Centrifugal pump, water pump, submersible pump -Manufacturer: Schmalenberger, submersible pump type ZB 40-18 -Flow rate: 27 m³/h -max. H: 5 m -Engine power: 1.45 kW Psdofunxvopfx Al Nepu -Speed: 2870 rpm -Pipe connection: see pictures -Dimensions: 300/300/H705 mm -Weight: 34 kg

Condition: excellent (used), Coolant pump, immersion pump, coolant pump, centrifugal pump, cooling lubricant pump Ppsdpfx Alehtryxj Neu -Manufacturer: Grundfos, coolant pump type SPK1-11/8 AAA -Drive: 0.25 kW 2850 rpm -Max. flow rate: 1.0 m³/h -Max. delivery head: 22 m Maximum temperature: 90 °C -Dimensions: 180/150/H590 mm -Weight: 11 kg

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Manufacturer: Grundfos, Multi-stage submersible centrifugal pump -Type: MTH4-40/4 AWA-AUUV Pedpfoy Tkazox Al Nopu -Drive: 1.1 kW 2850 rpm -Max. flow rate: 4 m³/h -Max. delivery head: 36.9 m -Immersion depth: 200 mm -Dimensions: 230/180/H435 mm -Weight: 14.9 kg

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Manufacturer: Grundfos, Multi-stage submersible centrifugal pump Psdpfjy Ti I Rjx Al Njpu -Type: MTH2-90/7 AWA-AUUV -Drive: 1.1 kW 2850 rpm -Max. flow rate: 2.5 m³/h -Max. delivery head: 64.6 m -Immersion depth: 250 mm -Dimensions: 230/180/H490 mm -Weight: 13.9 kg

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 150,000 mm, welding current at 60% duty cycle: 500 A, welding current at 100% duty cycle: 400 A, welding current (min.): 20 A, welding current (max.): 500 A, Esab Origo Mig 502cw – Water-cooled MIG/MAG Refurbished, serviced, tested and ready for immediate use 3-month warranty Specifications: 20-500 AMP 380 Volt Water-cooled 2/4 Step / 4 Roller Drive Burnbacktime adjustable End current Elektrode option Including: 4 Meter Welding Torch, earth cable with clamp, gas cable, and 15 metre interconnection hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. Podezaktaepfx Al Nspu You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 1,000 mm, welding current (max.): 420 A, ESAB Power Mig LAW 420W – Water-cooled MIG/MAG Refurbished, serviced, tested and ready for immediate use 3-month warranty Specifications: 420 AMP 380 Volt Water-cooled 2/4 Step / 4 Roller drive Burnbacktime adjustable End current Including: 4-metre welding torch, ground cable with clamp, gas hose, and 1-metre interconnecting cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. Ppedpfx Alozakr Ae Nju You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, mileage: 135,000 km, power: 115 kW (156.36 HP), first registration: 12/2012, fuel type: diesel, empty load weight: 5,530 kg, overall weight: 7,490 kg, wheelbase: 4,250 mm, fuel: diesel, gearing type: mechanical, number of gears: 6, emission class: euro5, number of seats: 3, total length: 7,220 mm, total width: 2,600 mm, total height: 3,340 mm, loading space length: 4,950 mm, loading space width: 2,470 mm, loading space height: 2,200 mm, Equipment: cooling unit, tail-lift, truck registration, Refrigerated box with an internal length of 4.95 m, Thermo King MD-100 deep-freeze unit, Diesel/electric refrigeration unit, Standby cooling (mains operation 380 V) and driving cooling down to -29°C, Palfinger tail lift, 1000 kg capacity, Wheelbase 4250 mm, 6-speed transmission, Driver's air suspension seat, Double passenger seat, Gross vehicle weight 7.49 t, Payload 1.96 t, EURO 5, German registration Mileage according to odometer Vehicle preferably sold to commercial businesses or for export, Private sales subject to approval Sold without warranty Net price for export Net: 10,000 EUR + (19% VAT) 1,900 EUR = Gross: 11,900 EUR Ppsdpfx Asynl R Asl Nju The above information is non-binding; errors/changes and prior sale are subject to approval! T 08026/2188

Condition: used, maximum load weight: 33,479 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2016, next inspection (TÜV): 04/2027, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2016, Additional information: * Type | First axle: Michelin * Tire size | First axle: 385/65 R22.5 * Tire tread depth inner left | First axle: 40% * Tire tread depth inner right | First axle: 40% * Maximum axle load | First axle: 9000 kg * Type | Second axle: Michelin * Type | Third axle: Michelin * Tire size | Second axle: 385/65 R22.5 Ppodjy Tgnbjpfx Al Neu * Tire size | Third axle: 385/65 R22.5 * Tire tread depth inner left | Second axle: 40% * Tire tread depth inner left | Third axle: 40% * Tire tread depth inner right | Second axle: 40% * Tire tread depth inner right | Third axle: 40% * Maximum axle load | Second axle: 9000 kg * Maximum axle load | Third axle: 9000 kg * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Brand | Third axle: Other * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Position | First axle: Rear * Brand | First axle: Other * Lifting axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brand | Second axle: Other * Brake type | Third axle: Disc brakes Additional features: * Rear doors * Homepage * Tail lift * Lifting axle * SemCollection Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire about the costs and procedures for your respective country in advance. Location | Maasdijk (NL) | 140 km from the German border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors. The stated prices exclude BPM and are only valid for export.

Year of construction: 2016, condition: used, This listing is for the Thermo Scientific IMH180 Heratherm Incubator. The unit is in full working condition and ready for immediate use. Designed for accurate and stable temperature control, this incubator is ideal for microbiology, cell culture, and general lab applications. It offers uniform heating, user-friendly controls, and robust construction for consistent laboratory performance. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Notice for Procurement: Pjdpfxoy H Iu Ao Al Nopu This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: good (used), BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance open cooling tower from the S1500E series by Baltimore Aircoil Company (BAC). This specific model is designed for industrial cooling applications and large HVAC systems where high efficiency and ease of maintenance are top priorities. Technology Patented BACross III fill system, which allows for easy inspection of the fill sheets to prevent biological growth (e.g., Legionella). Key Features of the S1500E Series Maintenance Access: A large, inward-swinging access door and internal maintenance platforms allow technicians to comfortably perform inspections while standing inside the unit. Hygiene Control: The design minimizes stagnant water and, thanks to special air inlet louvers, provides protection against sunlight, thereby reducing algae growth. Flexibility: Due to the single-sided air inlet, the cooling tower can be installed even in confined spaces or positioned directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Typical Applications Industrial Cooling: Used in factories for process cooling. HVAC: Deployed in large building complexes as part of the central cooling plant. Refrigeration: Serves as a condenser in commercial refrigeration circuits. Cooling Capacity An open evaporative cooling tower does not possess a single, fixed kW cooling capacity, as the actual performance depends entirely on thermodynamic ambient conditions and system temperatures. The model is designed for maximum flow rates of up to 198 liters per second. Under typical industrial or standard HVAC conditions, the nominal cooling capacity of this model ranges from approximately 1,200 kW to 2,100 kW. Why does cooling capacity vary? Wet-bulb temperature (ambient air): The cooler and drier the ambient air, the more water can evaporate, resulting in a higher cooling capacity. Water temperatures: Performance varies significantly depending on the incoming hot water temperature (e.g., 35 °C) and the outgoing cold water temperature (e.g., 29 °C). Air volume flow: According to BAC’s technical specifications, the S15E 1018-10 LE model actively moves 60.0 m³/s of air using three installed 11.0 kW fan motors. If this airflow volume is reduced via a variable frequency drive (e.g., during night operation or in winter), the cooling capacity decreases in a controlled manner. Approach: This represents the most critical thermodynamic limit. It describes the temperature difference between the desired cold water temperature and the prevailing wet-bulb temperature. The closer the cold water is required to be cooled to the wet-bulb temperature (i.e., a smaller approach), the lower the cooling capacity the tower can deliver. Technical Specifications: Fan & Air Data Airflow Rate: 60.0 m³/s (generated in suction mode) Fan Motors: 3x 11.0 kW (Axial fans) Technology: Integrated belt drive Water Flow Rate: 198 l/s Hydraulic Connections Water Inlet (Fluid Inlet): 1x DN 250 (Nominal Diameter ND 250 mm) Ppsdpfx Asynkbmel Nou Water Outlet (Fluid Outlet): 1x DN 300 (Nominal Diameter ND 300 mm) Fresh Water Connection (Make-up): 1x DN 40 (ND 40 mm) Overflow / Drain: DN 80 (ND 80 mm) / DN 50 (ND 50 mm)

Condition: ready for operation (used), Compressor DWM DLJP-20x-EWL, Compressor DWM DLJP-20x-EWL, Piston Compressor, Cooling Compressor, Heating Compressor, Used machine Technical Specifications Brand: DWM COPELAND Model: DLJP-20X-EWL Refrigerant: Freon Weight: 82 kg Year of manufacture: 1999 Performance at different temperatures: -20ºC/+40ºC: 4.98 kW -30ºC/+40ºC: 2.75 kW Maximum pressure values: 28/22.5 bar Delivery capacity: 14.50 m³/h Dimensions: Length: 460 mm Width: 330 mm Height: 550 mm Podpsu T H Rlefx Al Nopu Electrical Data: 400V; 5.6A; 1450 RPM

Condition: used, HB-Therm HB-100 U1 temperature control unit, Temperature control, Liquid temperature control, Industrial temperature control, Thermolator, used machine Manufacturer: HB-Therm Type: HB-100 U1 Overall dimensions: 200 × 650 × 500 mm Year of manufacture: 2008 Technical data: Maximum operating temperature: 100 °C Podpfoyzmagox Al Nopu Heating capacity: 8 kW Cooling capacity: 30 kW Heat transfer medium: water

Condition: not inspected (used), Year of construction: 2014, Cooling capacity: 10.1 kW Flow rate: 5,000 L/h Weight: 180 kg Pjdpfx Aley Nif Ij Nopu The unit is ready for immediate shipment and is available immediately!

Year of construction: 1996, condition: used, Incubator with control up to approx 80 ° with about the internal dimensions 400 x 500 x 350 Pjdpfxobylq Ho Al Nspu

Condition: new, Year of construction: 2020, Rittal TopTherm enclosure cooling units – types SK 3304540 and SK 3329540, new and unused. Both units are designed for 400V / 50Hz and 460V / 60Hz and are available from stock. Psdpfjy Iyvbox Al Nepu Available for immediate delivery.

Condition: new, Water bath/cooling trough for strand cooling during strand pelletizing. Made of stainless steel, suitable for various applications in plastics processing. Various lengths in stock, e.g., 3.5 m. Pjdpewcdh Dsfx Al Njpu With integrated strand guide rollers for safe and even cooling. Robust design, ready for immediate use. We would be happy to send you further pictures and details if you are interested!

Condition: excellent (used), Year of construction: 2018, High-quality Rittal enclosure cooling unit from the TopTherm series in very good (used) condition. This device is designed for reliable air conditioning and cooling of control cabinets and industrial equipment. Robust industrial design featuring a high protection rating and powerful cooling technology. Manufacturer: Rittal Model: TopTherm SK 3304540 Device type: Enclosure cooling unit Condition: Very good used condition Date of manufacture: 10/2018 Serial number: 2018K000166679 Year of manufacture: 2018 Voltage: 400 V / 50 Hz / 3~ Alternative voltage: 460 V / 60 Hz / 3~ Rated current: 2.2 A Starting current: 11.5 A Circuit breaker: 6.3 – 10 A Power consumption: 0.64 kW Total cooling capacity DIN EN 14511: 1.10 kW Sensible cooling capacity DIN EN 14511: 0.94 kW EER L35 L35: 1.72 Refrigerant: R134a Refrigerant charge: 325 g GWP R134a: 1430 CO2e: 0.46 t Ppodpfsy Sbvdsx Al Neu Operating temperature range: 10 °C to 55 °C Protection class, internal circuit: IP54 Protection class, external circuit: IP34 Weight: 40 kg Hermetically sealed: Yes Leakage tested according to EN-378-2 CE marking available Price per unit; several units available

Condition: used, Cooling unit, cooling water recooler, water chiller, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity: approx. 8 kW Ppedjpu R Ncjpfx Al Neu Rated power of cooling unit: 3 kW Refrigerant: R422D Water tank volume: approx. 35 liters Circulation pump flow rate: 40 liters/min Pump output: 0.63 kW Water connections: 1/2 inch Power supply: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Space requirement (L x W x H): 1100 x 750 x 140 mm Weight: 285 kg