Used Cefla Pixart 16/4/Uv for sale (65,273)

Condition: ready for operation (used), Bosch UVF 160M / 4B-21S / 202 / 3531139-6 servo motor, 1070914867, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, The agreed sales discounts do not apply to this article. Please enquire about price separately! ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Kjdpfx Anjk Ru A Uo Uodl

Condition: ready for operation (used), Heidenhain UVR 160D ID 530341-01 The costs stated apply only to the repair analysis of your component, which you may send to us. After inspection of your component, you will receive a quotation with the actual repair costs. Upon your approval for the repair, the analysis fees will be waived. As part of the repair process, your component will be completely overhauled and will be covered by our 3-month warranty. Kjdsy Nruxjpfx An Ujdl

Condition: ready for operation (used), Bosch UFV 160M / 4B-21S / 739 / 342776-1 servo motor UVF 160M / 4B-21S / 739 / 342776-1 / 107-914867, professionally completely overhauled and tested with a 12 month warranty, 100% functional, scope of delivery as per photos, The agreed sales discounts do not apply to this article. Please enquire about price separately!, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Kedpfxei D Hg Ao An Uodl

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 3660916, input voltage: 400 V, input current: 32 A, Hello, I am offering a fully refurbished Beltron UV dryer, which has been completely overhauled in our workshop. It is equipped with two UV lamps, each rated at 120 W/cm. The output can be infinitely adjusted thanks to modern electronic ballasts. The control system uses a Siemens display—no cheap Chinese components. Belt speed is also continuously adjustable. The conveyor belt width is approximately 42 cm, making it suitable for materials up to 40 cm wide. The current lamps have only 320 hours and 281 hours of operation since their replacement. During the workshop refurbishment, the dryer was completely repainted with 2K paint. The conveyor belt was replaced with a new one. The dryer is mounted on castors, making it mobile. It also has its own exhaust system, which only needs to be connected to a hose leading outside. Electrical connection: 400V/32A. The dryer is currently located at our warehouse/workshop near Cham in the Bavarian Forest. Inspection while operational is always possible. Shipping via freight forwarding or loading with a forklift is no problem at all. Kdsdpfx Aey Svq Ajn Uel Please feel free to contact me if you have any questions.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working width: 1,300 mm, transport length: 7,500 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, comprises: 1. CEFLA FEV E Dryer: LAMINAR AIRFLOW DRYER (ECOGEL E4/5) Type: SP-FEV E – 90 kW 2. CEFLA FEV EU Dryer: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU – 110 kW 3. CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU 4. CEFLA TR 3000 Roller Conveyor Kdodpsw H Aw Ssfx An Usl Heating medium – electric Installed electrical power for both dryers: approx. 210 kW --- 1. CEFLA FEV E Dryer: LAMINAR AIRFLOW DRYER (ECOGEL E4/5) Type: SP-FEV E – 90 kW The in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is equipped with a laminar hot air flow directed opposite to the panel feed direction and features adjustable recirculation air. • Total length: 7,500 mm • Working width: 1,300 mm • Total width: 1,783 mm • Max. drying height: 1,780 mm (conveyor excluded) • Useful pass-through height: 80 mm • Solvent-laden air exhausted externally: 0–4,000 m³/h • Machine control via 5.7" LCD touch panel • VS spark-proof supply/recirculation fan: – Power: 2.2 kW – Flow rate: 40,000 m³/h – Supply air into room: 0–4,000 m³/h – Installed heating capacity: 76,400 kcal/h (heating register 90 kW) --- 2. CEFLA FEV EU Dryer: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU – 115 kW The in-line hot air dryer is suitable for rapid evaporative and curing processes. This dryer is equipped with a laminar hot air flow in the opposite direction to the panel feed with adjustable recirculation air. • Total length: 7,500 mm • Working width: 1,300 mm • Total width: 1,783 mm • Max. drying height: 1,780 mm (conveyor excluded) • Useful pass-through height: 80 mm • Installed electrical power: 115 kW • Solvent-laden air exhausted externally: 0–4,000 m³/h • Machine control via 5.7" LCD touch panel • VS spark-proof supply/recirculation fan: – Power: 2.2 kW – Flow rate: 40,000 m³/h – Output electrical power: 1.5 kW – Supply air into room: 0–4,000 m³/h – Installed heating capacity: 76,400 kcal/h • PR antifreeze protection system for one heating register, with probe and automatic damper control --- 3. CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives is highly efficient for achieving increased heat exchange due to high air velocity. The air handling unit consists of: - Supply and recirculation fan: 3 kW; Flow rate: 6,000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6,000 m³/h - Digital ventilation setting via touchscreen - Air knives installed across the entire tunnel width - Air knife exit speed max. 32.5 m/sec • Total length: 3,000 mm • Useful width: 1,300 mm • Total width: 1,783 mm • Pass-through useful height: 80 mm • Max. tunnel height: 1,780 mm (conveyor excluded) • Installed electrical power: 4.5 kW • Machine control via 5.7" LCD touch screen • TT 4000 bar conveyor with double chain, steel guides and chrome-plated bars --- 4. CEFLA TR 3000 Roller Conveyor • Powered rollers with PVC coating • Length: 3,000 mm • Photoelectric sensor for thin panels, thickness 4 mm (Specifications subject to change and errors excepted; prior sale reserved)

Condition: refurbished (used), battery capacity: 465 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 353 mm, Tested forklift battery for your truck – 48V 3PZS 465Ah – DIN B + 1-year warranty + Includes aquamatic system + Includes end cell connectors & REMA 320 connector (other types available on request) + Capacity: minimum 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,035 mm Width: 353 mm Height: 784 mm Weight: approx. 770 kg Suitable for the following models and more: Linde A (1120) - 5022-00 Linde E 15 C - 322-00 Linde E 18 Z - 322-00 Linde R 10 BN - 1120-00 Linde R 10 CN - 1120-00 Linde R 10 N - 1120-00 Linde R 10 N - 1120-00 - frontal changeover Linde R 12 BN - 1120-00 Linde R 12 CN - 1120-00 Linde R 12 N - 1120-00 Linde R 12 N - 1120-00 - frontal changeover Linde R 12 N - 136-00 Linde R 14 - 1120-00 Linde R 14 - 376-00 Linde R 14 CN - 1120-00 Linde R 14 N - 1120-00 Linde R 14 N - 1120-00 - frontal changeover Linde R 14 S N ACTIVE - 115-12 Linde R 14 SN - 115-08 Linde R 16 AS 1140 - 1120-00 Linde R 16 CN - 1120-00 Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - frontal changeover Linde R 16 N - 113-00 Linde R 16 N - 115-00 Linde R 16 N HD - 1120-00 - frontal changeover Linde R 16 SN - 115-08 Linde R 16 SN - 115-12 Linde R 20 - 1120-00 Linde R 20 W - 1120-00 Linde V - 5213-00 Linde V 10 E - 146-00 Linde V MODULAR - 5213-00 Crown ESR 5220-1.4 Still FM 14 N Jungheinrich ET 110 Jungheinrich ET 112 Jungheinrich ETV Jungheinrich ETV 110 Jungheinrich ETV 112 Jungheinrich ETV 214 Jungheinrich ETV Q TCM RTL140 Common battery sizes available – please inquire. Transport can be arranged. Kedpfey Rnlcjx An Ujdl

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrical connection: 3x400V 50 / 60Hz - Cardanic 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - Ceramic bearings including liquid cooling with infinitely variable, height-adjustable dust extraction hood – controlled by electric motor - Full rated power at approximately 12,000 rpm - Speed range: 1,000 – 24,000 rpm - Drive: 3-phase high-frequency motor controlled via inverter - Rotational direction: right/left - 2 controlled compressed air connections - Interface for aggregates - Tool weight (rotating): 6 kg - Maximum saw blade diameter: 350 mm Ksdpfx Anoy Ih Rge Ujdl - Spindle cooling: liquid cooling - Continuously adjustable extraction hood - Profit H350 16.30: CNC machining center in gantry design (without tools) with digital drives (driven on both sides). The machine frame of the Profit H350 16.30 is made from thick-walled, electro-welded box sections. The internal steel ribbing in the frame ensures high stability. - Machining area H350 16.30: Axis travel: X = 4,000 mm Y = 1,970 mm Z = 455 mm Working area: X = 3,000 mm Y = 1,500 mm Z = 150 mm clearance height Axis positioning speeds: Depend on the selected safety system (can be taken from the layout). - Gantry drive on both sides - X-axis guidance system: The carriage of the X-axis is driven by a rack and pinion with helical, crowned teeth—this ensures maximum precision. The reduction gear guarantees the highest machining quality and repeat accuracy. The slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. - Y-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Y-axis is positioned by a ground ball screw. - Z-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Z-axis is positioned by a ground ball screw. - Automatic central lubrication: Grease is supplied under control to the guide carriages of the X, Y, and Z axes as well as to the recirculating ball screws on Y and Z. Lubrication is performed automatically after a preset interval. - 12-position linear tool changer mounted on the left side of the machine frame, including one pickup station for aggregates: The 12-position linear changer ensures minimal changeover times and offers ample space for milling tools. One station for aggregates (see layout for configuration options). Maximum tool diameter: 250 mm Maximum tool length: 240 mm - Drill head DH 18 6H 1S: Vertical: 12 spindles—7 in X-direction and 5 in Y-direction. Horizontal: 6 spindles—4 in X-direction and 2 in Y-direction. Stroke = 70 mm; max. drill length = 70 mm; shank diameter = 10 mm. All spindles individually driven and selectable. 1 grooving saw in X-direction; maximum saw blade diameter 120 mm.

Condition: excellent (used), Four-head paper drill. Kedpfx Ansudl Ike Uodl Several pieces available !!! Brand Hang Model 106DTK4 Details 4-head paper drilling machine With adjustable drilling heads Operation Electric foot switch, 2 speeds Available directly This additional information is standard for this model. Always check the details carefully during your visit. The 1975 Hang 100DTK4 printing machine is an iconic and reliable piece of equipment that has made a significant impact on the printing industry. Manufactured by Hang, the machine offers advanced features for its time and set the standard for high quality and efficient printing. The Hang 100DTK4 features a robust and durable design, ensuring stability and consistent performance during the printing process. Its printing technology, although conventional by today's standards, allowed for precise and sharp prints with satisfactory resolution for its era. Equipped with user-friendly controls and mechanical automation, the machine offered programmable settings for various printing formats and configurations. Its operation required skilled operators who were able to achieve accurate and repeatable printing results. The printing machine's capabilities extended to a variety of substrates, including paper, paperboard and lightweight cardboard, satisfying a range of printing applications common at the time. Launched in 1975, the Hang 100DTK4 presented a technological advance for its era. Its sustained performance and contribution to the printing industry are remarkable. While newer printing machines with advanced digital technology have emerged, the Hang 100DTK4 remains a historic symbol of performance and innovation in the printing industry in the 1970s. The machine has collector's value and serves as a testament to the evolution of printing technology over the decades.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: Kdsdpfx Ansfdkb To Usl - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm Kdjdpfed Tqalox An Ujl - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, mileage: 467,066 km, power: 294 kW (399.73 HP), first registration: 09/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 01/2027, gearing type: automatic, Equipment: ABS, air conditioning, crane, Scania R400 Construction Material Truck + Hiab 166K Pro Crane Truck + Stone Clamp! TÜV until 01/2027! ---- * Manufacturer: Scania * Model: R400 * First registration: * Displayed mileage: 467,066 km * Drive: 6x2 Kjdpfxeywq I To An Uedl * German registration * Includes stone clamp * Hiab 166K Pro crane / high seat (year of manufacture ) * TÜV valid until 01/2027 * Good condition! * Liftable steering axle * Platform body length: approx. 6.70 meters (loading area) * Total length: approx. 10.20 meters * Trailer hitch * More photos and videos available on request! * Price: €28,900, net + 19% VAT ----For further questions, please call: For more questions please call: Erik Kortum: WhatsApp Kai Kortum: WhatsApp All details subject to change and errors excepted. Interim sale reserved.

Condition: ready for operation (used), Bosch UVF 160L / 4C-21S - UVF 160L/4C-21S servo motor, serial no. as per photo,used, normal signs of wear, 100% functional, scope of delivery as per photos ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Kdedei D Hhkjpfx An Ujl

Condition: ready for operation (used), Bosch QUVF 132S/4A-21 380/3667225-1 servo motor SN 1070916431, the motor was overhauled by the manufacturer, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Kodpfx Anei D E Rqs Uedl

Condition: ready for operation (used), You are bidding on a Heidenhain UVR 140D Inverter, ID: 1084190-01, Power Supply Unit, SN: 59161711F, available on an exchange basis (exchange service). The unit has been professionally overhauled and fully tested, comes with a 3-month warranty, and is 100% functional. The delivery scope is as shown in the photos. Please note: Under the exchange procedure, your defective unit must not have any mechanical damage such as cracks or breakages, as these cannot be repaired. In such a case, an additional charge of €400 including VAT will be invoiced. Kedpox Etthefx An Usdl

Condition: ready for operation (used), Heidenhain UVR 130D converter, Id. 377 639-01 SN25616462H, the item has been overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, scope of delivery as per photos. Kjdpfjx Etrqsx An Usdl

Condition: ready for operation (used), Heidenhain UVR 140D ID: 1084190-01 converter – power supply unit SN: 59161711F, professionally overhauled and tested with 3 months warranty, in good condition, 100% functional, delivery as shown in the photos. Kdodox Ettbjpfx An Uol

Condition: ready for operation (used), Heidenhain UVR 150D power supply unit Id. 390 421-01 SN:16058385E. The item has been completely overhauled and comes with a 3-month warranty. Used, in good condition, 100% functional. Delivery as per photos. Ksdpfx Aox Dw Dxjn Ujdl

Condition: ready for operation (used), functionality: fully functional, working width: 1,300 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, The auction consists of: CEFLA FEV E Dryer: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW CEFLA FEV EU Dryer: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW CEFLA Cooling Zone: AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU CEFLA TR 3000 Roller Conveyor CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW Note: The paint booth visible in the video is not included in the scope of delivery or sale. TECHNICAL DETAILS Working width: 1300 mm Maximum drying height: 1780 mm (excluding conveyor) Pass-through working height: 80 mm Fan throughput: 40,000 m³/h MACHINE DETAILS Control: LCD 5.7" touch panel Dimensions (L x W): 7,500 x 1,783 mm Emitted solvent-containing air: 0-4,000 m³/h EQUIPMENT VS spark-proof supply/recirculation fan CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW TECHNICAL DETAILS Working width: 1300 mm Maximum drying height: 1780 mm (excluding conveyor) Pass-through working height: 80 mm Fan throughput: 40,000 m³/h MACHINE DETAILS Control: LCD 5.7" touch panel Dimensions (L x W): 7,500 x 1,783 mm Emitted solvent-containing air: 0-4,000 m³/h EQUIPMENT VS spark-proof supply/recirculation fan Cooling Zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU TECHNICAL DETAILS Usable width: 1,300 mm Pass-through working height: 80 mm Maximum tunnel height: 1,780 mm (excluding conveyor) Maximum air knife outlet speed: 32.5 m/s Fan power (supply/recirculation): 3 kW Fan power (exhaust): 1.5 kW Kdsdpsyg Eynofx An Uel Air throughput (supply/recirculation fan): 6,000 m³/h Air throughput (exhaust fan): 6,000 m³/h MACHINE DETAILS Control: LCD 5.7" touch Dimensions (L x W): 3,000 x 1,783 mm EQUIPMENT TT 4000 bar conveyor with double chain, steel guides, and chrome-plated bars CEFLA TR 3000 Roller Conveyor MACHINE DETAILS Overall length: 3,000 mm EQUIPMENT Photoelectric sensor for thin panels, thickness 4 mm

Condition: used, functionality: fully functional, machine/vehicle number: 6425167, Year of construction: 2016, operating hours: 1,451 h, load capacity: 1,600 kg, lifting height: 4,500 mm, free lift: 1,595 mm, fuel type: electric, mast type: triplex, construction height: 2,050 mm, fork length: 1,150 mm, drive type: Elektro, High lift truck Chassis number: 6425167 Mast type: Triplex Condition: Reconditioned without warranty Kdodpfjuhwtgjx An Ujl Technical condition: good Battery Volt: 24V Battery Ah: 300Ah Battery year of construction: 2016 Description: BT SWE160 No.: R0355 Year of manufacture: 2016 Operating hours: 1451 The device is visually and technically in very good condition. Charger on request. Fast and uncomplicated transport possible by arrangement! The advertisement only serves to identify the device! A detailed description of the condition and possible equipment will be provided individually on request! Subject to errors and prior sale, sale only to tradespeople. All used goods are sold without warranty or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other equipment on site.

Condition: excellent (used), Painting-finishing line with spraying machine, for panels, max working width mm 1300 Dimensions of the line: max lenght 48 meters (ca.) x max width 10 meters (ca.) Composed of the following machines: a) Motorized belt transfer "CEFLA" Mod. TB3500 Ksdpfx Ashbyr Sjn Ujdl b) "SORBINI" brushing machine Mod. SmartClean 33-F, with upper brushes + air blowers c) Motorized belt transfer "CEFLA" Mod. TB4000-2V/CT, with plexiglass closure d) Automatic Spraying machine - NC "CEFLA" Mod. iBotic RU1WP, with 4 spraying guns + 1 spraying gun for panel edges e) Motorised belt transfer "CEFLA" Mod. TB4000-2V/CT, with Plexiglas enclosure f) Vertical oven "CEFLA" Mod. PIEFFE VL 6/7400, with 6 trays max length 7000 mm g) Motorized belt transfer "CEFLA" Mod. TR4000-CT, with Plexiglas closure h) Pressurised drying booth "CEFLA" Mod. GPAU/30 (6 x 10 metres - Kw 22.5) i) Pressurised spray booth (6 x 6 metres) with recirculating water spray booth l) Pressurized sanding booth (with 2 suction benches)

Condition: excellent (used), Year of construction: 2001, I sell the bar conveyor suitable for Industry use, for example wooden industry, material manipulation etc. Ksdpjt Rr Hbefx An Uodl Brand: CEFLA Model: TR3000/133/RE/RU Total length 2,60m Band width 1450mm Feeding with electric motor 0,26kW / 0,35HP Fully working. Available immediately.

Condition: good (used), Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: Mikron, tool changer from CNC machining center Mikron VC500D Kdsdpey Tvttjfx An Ujl -for: max. 16 recordings -Recording: SK40 -Individual components: see photos -Transport dimensions: Ø 780 x 540 mm -Weight: 56 kg

Condition: good (used), Centrifugal pump, water pump, domestic water pump, garden pump, high-pressure centrifugal pump Ksdowyaryepfx An Ujdl -Manufacturer: WILO, High-pressure centrifugal pump type Helix V1008-1/16/E/KS/400-50 -Power: 3 kW -Flow rate: l/h -p max: 16 bar -Number: 2x pumps available -Price: per piece -Dimensions: 250/240/H950 mm -Weight: 47 kg/unit

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Manufacturer: Grundfos, Multi-stage submersible centrifugal pump -Type: MTH4-40/4 AWA-AUUV -Drive: 1.1 kW 2850 rpm -Max. flow rate: 4 m³/h -Max. delivery head: 36.9 m -Immersion depth: 200 mm -Dimensions: 230/180/H435 mm Ksdpfx Aney Tkaze Uedl -Weight: 14.9 kg

Condition: used, Year of construction: 2017, machine/vehicle number: Z1617002WS, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Kedpfotr Htrex An Usdl Empty weight: 8.200 kg Mast: articulated arm Lifting capacity: 230 kg Working height: 1.700 cm Max. horizontal reach: 930 m Transport dimensions (LxWxH): 7.7x2.24x2.25 Please contact PFEIFER GROUP for more information