Used Carcase Press Ligmatech Mph 100 for sale (32,963)

Condition: new, pressure 100 t stroke 380 mm table surface area 1740 x 996 mm pressure 258 bar ajustment speed 7,54 mm/sec work speed 2,47 mm/sec return speed 9,06 mm/sec dayligth 700 mm table height 720 mm total power requirement 2,2 kW weight of the machine ca. 1685 kg - Manually movable portal - Movable cylinder manually (left - right) - Cylinder extension up to the table - Integrated pressure gauge Pedpfsi Db Erex Ahlspt - Pressure regulator - Two-speed hydraulic unit - Joystick to move the piston up / down - Hand pump for precision work These straightening presses are equipped with a movable cylinder (on the side) and a Movable frame (longitudinal-running) equipped to allow easy access to all allow points of the surface. The design of this portal press makes it possible to put heavy material on the table with a crane and that Slide the portal over the material at the beginning of the pressing process. The quality of these hydraulic straightening presses is very high. Over and beyond is the hydraulic unit with a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing.

Condition: used, Year of construction: 2003, pressure 400 t distance between columns 1060 mm stroke 450 mm no. of strokes 15 - 30 /min distance table/ram, max. stroke up, adjustment up 1160 mm table surface area 1000 x 700 mm capacity of ejector in table 2 x 16 t Podevzxpujpfx Ahlspt ejector stroke of ejector in table 125 mm Die cushion pressure in table 120 t Die cushion stroke in table 2 mm capacity of ejector in ram 2 x 4 t stroke of ejector in ram 100 mm ram surface 1000 x 700 mm column travel -side 630 mm power capacity 55,0 kW weight 50,0 t year of manufacture 1986 - overhaul 2003 multi-station press with automatic parts feed, Transfer, drawing cushion in table (2. stage) as is where is, WITHOUT putting into operation, stored in dismantled condition

Condition: ready for operation (used), working length 3300 mm working height 1800 mm 3 vertical cylinders 2 horizontal cylinders manual operating mode Podpfx Ahsypcxtslept

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Perfect condition, purchased from a warehouse, used as a backup. Ppedpfswud Tkex Ahljt Book press with groove burner. Manufactured by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Weight 250 kg Power supply 380 V + compressed air.

Condition: as good as new (ex-display), Year of construction: 2025, Hydraulic SPS press 100to (1.000KN) pressing force Siemens SPS1200 series Pjdpenp Ndhefx Ahlopt Screen 10" Beijer stroke 400mm table top 790mm x 600mm Speed forward 110mm Speed return 140mm Light curtain Sick Remote maintenance module built in Rexroth hydraulics with cooler Available from week 46 fairground Stuttgart Modifications can be realized after request if necessary

Condition: new, TIGERMETAL WH100 – Hydraulic Workshop Press 100 Tons | Electric + Manual Pump Instead of €10,489 gross RRP, now only €6,699 net (€7,972 gross incl. 19% VAT). You save -24% compared to the RRP! The TIGERMETAL WH100 workshop press is a high-performance and robust industrial press designed for demanding applications in workshops, production, and maintenance. With a pressing force of 100 tons, the machine is ideal for heavy-duty straightening, pressing, and bending operations. Thanks to the combination of electric drive and manual hand pump, the press offers maximum flexibility: fast operation in automatic mode and precise fine control for sensitive applications. 🔧 Technical Data: Model: WH100 Manufacturer: TIGERMETAL Pressing force: 100 tons Drive: Electric motor + manual pump Motor power: approx. 3 kW Connection: 400V – 16A – 50 Hz Max. working pressure: approx. 320 bar Stroke: approx. 400 mm Working width: approx. 1000 mm Max. working height: approx. 1000 mm Weight: approx. 820 kg Advantages: Ppsdpfx Aof Sqcyjhlet ✔ Combined operation (electric + manual) ✔ Extremely high pressing force for heavy-duty applications ✔ Precisely controllable pressure ✔ Laterally movable cylinder for flexible positioning ✔ Height-adjustable crossbeam ✔ Heavy-duty, durable steel construction ✔ Integrated pressure gauge (manometer) ✔ Safety valve for overload protection ✔ Optionally expandable with accessories The laterally movable cylinder and the height-adjustable working table allow optimal adaptation to a wide variety of workpieces and applications. The massive steel construction ensures maximum stability and a long service life—even under intensive industrial use. The WH100 is the perfect choice for anyone looking to combine maximum pressing power with precise control and industrial reliability. A wide range of additional workshop presses in various designs, sizes, and optional equipment is available! Some images may show a slightly different version than the one offered here. The version shown in some pictures may include an additional automatic function. Available versions: 30 tons 60 tons 100 tons 150 tons 200 tons 200 tons: on request Custom machines: on request New machine! We are also happy to manufacture a custom-built press tailored to your requirements. The press can be tested on-site under power. ----- We are happy to provide individual consultation and prepare a tailored offer. Simply send a non-binding inquiry! ----- The stated price is net plus 19% VAT. All information without guarantee! Delivery available throughout Europe! The European Commission provides a platform for online dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, fax, phone, messaging platforms). You will first receive a non-binding offer including our general terms and conditions as well as information on your right of withdrawal before any purchase/contract is concluded.

Condition: new, pressure: 100motor power: 4messurements (LxWxH): 1.600 x 850 x 2.500oil filling: 29performance of pump: 14,5speed: Vorlauf 8,5 mm/sec, Rücklauf 13,43 mm/secweight approx.: 1.000column width: 1000 x 350Standard Equipment: High-quality hydraulic press can be operated both manually and motorized. Cylinders can be shifted sideways. Ppedpfxsnzwhae Ahlet CE certified Pressure adjustment 1-year warranty Pressure gauge (manometer) User manual (manual) Option :  Clearopening -> 1200 x 400 mm (750 ¤ extra)

Condition: used, Year of construction: 2005, functionality: fully functional, Spotting Press – Manufacturer: Reis – TUS 130-100 – 26–100 t Spotting Press – Table 1,600 × 1,300 mm For sale is a spotting press from manufacturer Reis, model TUS 130-100, with an adjustable pressing force from 26 to 100 t. This machine features a spacious table area of 1,600 × 1,300 mm, a daylight opening of 1,700 mm, as well as extensive features such as a tilting ram plate and integrated ejector. It is especially suitable for spotting, adjustment, and tryout work in tool and mould making. ===== Technical Data & Information: Spotting Press Reis TUS 130-100 – 26–100 t ==== General Information - Manufacturer: Reis - Model: TUS 130-100 - Drive Type: 4-column spotting press - Pressing force: 26 – 100 t (adjustable) - Machine weight: approx. 17,000 kg - Dimensions (W × D × H): 4,900 × 2,800 × 5,500 mm ==== Working Area - Maximum daylight: 1,700 mm ==== Table and Ram - Table size: 1,600 × 1,300 mm - Max. table load: 12,000 kg - T-slots: DIN 650 – 22 mm ==== Forces - Retraction force: max. 45 t ==== Hydraulics - Hydraulic pump: Rexroth SYDFE2x/071R-PPA.. - Motor power: 15 kW - Operating pressure: max. 200 bar - Pressure accuracy: ± 5 bar - Oil tank volume: approx. 475 l - Hydraulic oil: HLP 36 ==== Electrical System - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection: 15 kW - Total connected load: approx. 21 kW ==== Control System - Siemens Simatic S7-634 - Operation via control panel - Functions: - Ram up / down - Ram tilting - Table traverse - Ejector control - Adjustable press force ==== Features - Tiltable ram plate: 180° (up to 7.5 t tilted) - Ejector in ram: 5.6 t / 160 mm stroke - Stroke extension: +300 mm - Increased speed feature ==== Documentation - Hydraulic schematic - Electrical schematic - Technical drawings - Data sheet Ppsdpfx Aoxd Tv Dehlot ===== Spotting, tool tryout, tool adjustment, mould making, tool making, tryout processes Spotting press, tool tryout press, tryout press, tool adjustment press, tool tryout press, sample press, hydraulic press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are designed and manufactured according to the German Machinery Directive, European Machinery Directive (Directive 2006/42/EC), EC standards and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they comply in all points with the Brazilian national safety guideline NR 12, which builds on these requirements. Our greatest strength is special machine construction and press automation. We supply customized hydraulic presses at surprisingly competitive prices. The hydraulics are predominantly equipped with components from leading European manufacturers.

Condition: used, Year of construction: 1998, For sale is a used spotting press from manufacturer Reis, featuring an adjustable pressing force of up to 100 tons. This 4-column press offers a table size of 1600 × 1300 mm, a maximum open height of 950 mm, and is equipped with an ejector in the table, making it particularly suitable for spotting, adjustment, and toolmaking work in mold and die construction. ##### Technical Data & Information: Psdpfx Aexd Tiqjhlspt Spotting Press – REIS TUS 80-100 #### General Specifications - Designation: Spotting Press - Manufacturer: REIS - Type: TUS 80-100 - Design: 4-column press - Year of manufacture: 1998 - Pressing force: 26–100 tons (adjustable) - Maximum return force: 45 tons - Table size: 1600 x 1300 mm - Max. table load: 5,000 kg - Max. open height: 950 mm - Overall dimensions (W x D x H): approx. 3400 x 4200 x 3700 mm - Total weight: approx. 8,500 kg - T-slots: DIN 650 – 22 mm #### Hydraulic System - Hydraulic pump: Rexroth SYDFE11x71RN0030CAM - Motor power: 7.5 kW - Max. operating pressure: 200 bar - Pressure accuracy: ±5 bar - Tank oil volume: 215 L - Hydraulic oil: HLP 36 #### Features / Equipment - 180° tiltable ram plate (up to 3 t) - Table ejector (3.5 t / 130 mm) - Oil coupling sockets for core pullers - Digital measuring system - Material feed through ram plate possible (injection molding) - Speed increase #### Control System - Operator panel - Control system: Siemens / Pilz - Functions: - Ram up / down - Tilt ram plate - Extend table - Operate ejector - Adjust pressing force - Control core pull / oil couplings #### Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor: 7.5 kW - Total connected load: approx. 10 kW (spotting press, tryout press, tool adjustment press, toolmaking press, 4-column press, hydraulic press, REIS press, toolmaking spotting press)

Condition: new, pressure: 100motor: 15daylight: 500stroke lenght (max.): 400table diamension: 800 x 600tappet area: 800 x 600table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 230mm. Auxiliary cylinder: 2 pcs. Ø 50 x 30mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 11kw. - 15hp. ( IE-3 ) Ppsdpfx Ahem Nntyelst Pump: 23Liter / ASC. Speed : flow 110mm./sec. - return 200mm./sec. - Pressure : 9 mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 - (with T - grooves) Plunger plate: 800 x 600 - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: new, Year of construction: 2024, functionality: fully functional, TRtech Prime 31100 Press Brake 1 EUR 52,500.00 EUR 52,500.00 Bending Force: 100 ton Bending Length: 3100 mm Distance Between Columns: 2600 mm Stroke: 265 mm Daylight: 490 mm Throat Depth: 410 mm Table Height: 900 Table Width: 110 mm Free Fall Speed: 120 mm/s Pressing Speed: 10 mm/s Return Dpeed: 110 mm/s Ppodpfx Aevd Aavehlet X Axis Stroke: 750 mm Engine Power: 11 kW Width: 1780 mm Height: 3960 mm Length: 2850 mm App. Weight: 8500 kg Number of Axis: X, R, Z1, Z2, Y1, Y2 Safety Cages with Switch CNC Controlled Hydraulic Dynamic Crowning System Control Unit: STEP Rock 22 Servo Motor Backgauge: X, R, Z1, Z2 Segmented Die Segmented Punch Sliding Front Arms ( T-Slot and stopper ): 2 pieces Payment conditions: BY SWIFT: %40 pre-payment in advance, rest before loading TOTAL EUR 52.500,00 Delivery time: EX-Works OSM Makina, 12 weeks after the reception of order SEAL AND SIGNATURE PROFORMA INVOICE Bill To Frank Pelka Maschinen GmbH Dorfstr. 11 57271 Hilchenbach Germany

Condition: new, pressure: 100motor: 11daylight: 500stroke lenght (max.): 400Tappet adjustment: 790 x 600table height: Fußboden zu Tischplatte Oberkannte - 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 barControl / Key Switch Modes:Setup Mode – Manual operation without light sensor Automatic Mode – Full speed with integrated light sensor Hydraulic System:Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 pcs, Ø 50 x 30 mm Auxiliary Guides: 2 pcs, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc, 23 L/min – Helical gear pump Speed:Approach: 110 mm/sec Return: 200 mm/sec Pressure phase: 9 mm/sec Machine Dimensions:Daylight Opening: 500 mm Stroke Length: 400 mm Ram Plate: 790 x 600 mm (with T-slots) Table Plate: 790 x 600 mm (with T-slots) Table Height: 850 mm (from floor to top of table) Hydraulic Equipment:REXROTH hydraulic control block & components Pressure adjustable via PLC (20 – 100 tons) Speed adjustable via PLC Air oil cooler Pre-fill valve Pressure hold valve Control System:Siemens S7-1200 PLC Main control cabinet Safety PLC (SICK) Light curtains (SICK – 700 mm) Linear encoder for stroke adjustment 10” PLC touchscreen – BEIJER (German & English) Movable two-hand control unit Pedpfxowrkctj Ahlept Ethernet connection for remote support Visual and acoustic fault alarms Dual work area lighting In full compliance with EN 693 machine safety regulations Side safety doors (outward opening) Hydraulic proportional valves Dual-channel safety control User manual & parts list (German) Oil Volume: 220 L (Tank capacity: 250 L)Total Weight: approx. 5,500 kgOverall Dimensions: 1300 x 2000 x 2750 mmColor: RAL 7035 Light Grey & RAL 7016 Anthracite Grey Besichtigung unter Strom bei uns in Böheimkirchen 3071 (Neustiftgasse 34) möglich.

Condition: new, pressure: 100bending length: 3020column width: 2555daylight: 530stroke lenght (max.): 300column throat depth: 450messurements (LxWxH): 3725x2260x2780weight approx.: 85504 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die CNC Steuerung Esa S630 (2D Grafik Steuerung)motor power: 11 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK kletzer Made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X and R CNC axes via the control. Of course, the CNC crowning control Esa S640 (2D graphic control) is also included. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. Peded En Rxspfx Ahlept CNC axes Y1, Y2 , X and R axis Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw Motorized crowning device with CNC control 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Other controls: ESA 640 2D 15'' touch screen control                                           ¤ 4,520.00 ESA 675 W 3D 21'' touch screen control (Windows Base)           ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)        ¤ 10,165.00 DELEM 69 T 3D 17'' touch screen control (Windows Base)        ¤ 16.350,00 KK Industries GmbH There's something for everyone!

Condition: new, pressure: 100bending length: 2600column width: 2150daylight: 530stroke lenght (max.): 300column throat depth: 450messurements (LxWxH): 3320x2260x2780weight approx.: 79004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 11 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK kletzer Made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X and R CNC axes via the control. Of course, the CNC crowning control Esa S640 (2D graphic control) is also included. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X and R axis Esa S640 (2D graphic control) Ppodsd En Ryopfx Ahlet Back gauge with double linear guide and ball screw Motorized crowning device with CNC control 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Other controls: ESA 640 2D 15'' touch screen control                                     ¤ 4,529.00 inkl. ESA 675 W 3D 21'' touch screen control (Windows Base)      ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)     ¤ 10.165,00 DELEM 69 T 3D 17'' touch screen control (Windows Base)     ¤ 16.350,-- KK Industries GmbH There's something for everyone!

Condition: new, drilling on table: 120die cushion returning speed: 52die cushion stroke: 200die cushion press capacity: 30motor power: 11retracting speed: 165working speed: 8,5rapid traverse: 100daylight: 750pressure: 100tappet measurements: 900 x 600table diamension: 1100 x 700messurements (LxWxH): 2.180 x 1.600 x 3.350weight approx.: 9300total power requirements: 11stroke: 500 Podpfjd Ab Imex Ahlspt

Condition: new, pressure: 100stroke: 300total power requirements: 7,5weight approx.: 5400messurements (LxWxH): 1900 x 1300 x 2750table diamension: 1100 x 600tappet area: 680 x 420drilling on table: 120daylight: 500working speed: 5,5retracting speed: 37rapid traverse: 17,5 Ppodpfx Ahjd Ab Iyeljt

Condition: used, Year of construction: 1988, operating hours: 1 h, machine/vehicle number: V 516, total width: 2,000 mm, total length: 7,000 mm, total height: 1,800 mm, operating pressure: 300 bar, pressing force: 90 t, sheet thickness aluminum (max.): 5 mm, power: 11 kW (14.96 HP), empty load weight: 16,000 kg, cutting force: 90 t, year of last overhaul: 2025, Bale size 400x400 mm Force 1 Step 900 KN Force 2 Step 900 KN Steel max. 2500-3500 Kg/Std. Aluminium max. 2000 - 3000 Kg/Std. Driving Power 11 KW Arrangement Surface 7x2x2,5 m x m Machine weight 16 to Place: Austria Ppodpfx Ahjlhqd Roljt Aviable: 30.01.2025

Condition: new, Year of construction: 2026, machine/vehicle number: 26.04.21, functionality: fully functional, Fresan FP 100P - C Frame Eccentric Press - 100 Tons (1000kN) TECHNICAL DATA: * Power: 100 tons (1000kN) * Strokes Per minute: 60 (variable) * Ram-Table Distance: 445 mm * Stroke Adjustment: 0 - 132 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) Ppjdpfjnxh T Rex Ahlot * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: new, V100mm Press brake dies of Amada/Promecam style Ppedpfswcx Ncex Ahlot

Condition: new, Compressor AIRCRAFT Airprofi 703/100 – used – Galvanised tank, incl. pressure regulator, Year of manufacture 2018, unused, SPECIAL PRICE instead of promo price 1,699,-- ----- Technical Data ----- Tank capacity: 100 litres, Max. air displacement: 650 litres, Max. pressure: 10 bar, Motor: 4 kW, Speed: 950 rpm, Sound pressure level: 93 dB - new demonstration unit - Podpfxex Sx E Ao Ahljpt

Condition: used, total length: 2,500 mm, total width: 2,400 mm, total height: 2,400 mm, Weight: 4.000 kg - Documentation available: No - CE certificate present: No - Drive system: CNC - Press force [ton]: 40 - Max. working width [mm]: 2050 - Column gap [mm]: 2050 - Options: Finger safety guard - Transport dimensions: 2500mm x 2400mm x 2400mm (l x w x h) Ppjdpfxoxwmwbj Ahljt - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1981, total length: 3,200 mm, total width: 1,500 mm, total height: 2,100 mm, Colour: Green Weight: 6.000 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: - Drive system: Conventional - Power [kW]: 11.0 - Press force [ton]: 100 - Max. working width [mm]: 3100 Ppjdpfxsy Rrdcs Ahlst - Column gap [mm]: 2700 - Backgauge depth [mm]: 700 - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 3200mm x 1500mm x 2100mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2014, operating speed: 8 mm/s, reverse speed: 100 mm/s, total length: 2,470 mm, total width: 2,000 mm, total height: 2,100 mm, overall weight: 3,800 kg, controller manufacturer: CYBELEC CNC, working width: 2,100 mm, bending force (max.): 40 t, distance between stands: 1,650 mm, control type: CNC control, number of axes: 4, actuation type: hydraulic, Press brake TOSKAR - TA 2100-40 MACH-ID 9474 Make: TOSKAR Type: TA 2100-40 Control: CYBELEC CNC Year: 2014 Cybelec 2D Controll system 4 Axis controlled Y1 / y2 / X / Delta-R 1 set universal tooling Fiessler laser safe  Sheet support arms front side Max. bending length: 2100mm Distance between column: 1650mm Max. pressing force: 40T Beam stroke: 130mm Table Width: 100mm Troth beam: 300mm Approch speed: 100mm/min. Working speed: 8mm/min. Podpfx Ahsyw Ip Ijlspt Return speed: 100mm/min. Adjustment X-Axis back gauge:1009mm Number of controlled axis: 4 Power: 5.5kW Length: 2470mm Width: 2000mm Height: 2100mm Weight: 3800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2021, total length: 3,720 mm, total width: 2,300 mm, total height: 2,750 mm, Colour: White Weight: 7.700 kg Price: On request - Year: 2021 - Documentation available: No - CE marking present: Yes - CE certificate present: No Ppodoy N Aupopfx Ahlot - Serial number: 2102061 - Drive system: CNC - Control system brand: Cybelec - Control system type: Cybtouch-8W - Power [kW]: 11.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 135 - Max. working width [mm]: 3100 - Column gap [mm]: 2500 - Throat depth [mm]: 410 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 210 - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 3720mm x 2300mm x 2750mm (l x w x h) - Transport weight [kg]: 7700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2016, operating hours: 27 h, total length: 3,900 mm, total width: 1,600 mm, total height: 2,300 mm, Colour: Grey Weight: 6.650 kg Price: On request - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 27 - Drive system: CNC - Control system brand: Delem - Control system type: DA-66T - Power [kW]: 7.5 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 100 - Max. working width [mm]: 3100 - Column gap [mm]: 2600 - Throat depth [mm]: 300 - Backgauge depth [mm]: 800 - Max. stroke [mm]: 140 - Crowning system: CNC-controlled - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 3900mm x 1600mm x 2300mm (l x w x h) Psdpfx Ahjyrn Edelspt - Transport weight [kg]: 6650kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum