Used Bts-Mf450Hd Special Waste Baler for sale (11,364)

Condition: excellent (used), pressing force: 25 t, Equipment: documentation/manual, Tested, cleaned, full service performed. Fully equipped, ready to use! Dedpfsx Alctex Aqvjkn

Condition: good (used), functionality: fully functional, machine/vehicle number: 004, bale weight: 5 kg, power: 3 kW (4.08 HP), empty load weight: 130 kg, Used THERMOPERS, model TO6 the compact plastic waste baler for soft thermoplastics, such as wrapping and shrink films, and to process it into bales. Serial number 004. The Thermopers is the solution to handle the plastic waste stream efficiently. The material can be loaded into the Thermopers directly. When the Thermopers is full it can be closed and started, the rest of the process is fully automatic and silent. The inserted material is compressed and sealed into an easy-to-handle package of approximately 5 kg. Characteristics The volume of the plastic films is reduced by 90% with the Thermopers. Thanks to the compact size of the Thermopers and the connection to a standard 230 Volt socket, the machine is easy to apply everywhere. Dkodpfxer Dufbe Aqvon The Thermopers is easy to operate and the status of the compaction process is clearly displayed by LED indication. The drive of the Thermopers is fully electric and low in maintenance. The size of a package is 60 x 30 x 10 cm and has a weight of approximately 5 kg. Operation The plastic waste material can easily be loaded into the machine via the insertion valve. When the machine is fully loaded, the insertion valve is closed and the machine is started. The plastic material is compressed by a combination of pressing and heating, whereby the outside of the plastic material is sealed around the package as a mantle. Thereafter the package is cooled, and the pressing mechanism will return. When ready, the machine gives an audio signal and the compacted package can be removed. After this the machine can be used again instantly. Advantages • Easy to operate • Fully automatic and silent • Compact machine • 90% volume reduction • Prevents drifting of material • Less storage • Less transport, resulting in a reduction in CO2 emissions • Higher returns / lower costs • Low maintenance • In accordance with machinery directive, CE marked Technical data Width: 70 cm Depth: 50 cm Height: 128 cm (excluding press rods) Height: 208 cm (including press rods) Weight: 130 kg Mains voltage: 230 Volts Power: 3 KW Energy consumption: approximately 1 kWh per package Sales price: 1.550 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-Tyre Packing Machine Gen.2 is ideal for used tyre companies with large tyre volumes. The triple machine is the perfect solution for cost-effective disposal or resale of second-hand tyres. By doubling or tripling the tyres you achieve an enormous volume reduction, the available storage and loading capacity, as well as the permissible transport weight can be used much more efficiently. Pressing cylinder: Pneumatic Pressing force: 1.23 kN, adjustable Machine size: 1250 H x 1930 W x 660 D mm Machine weight: 93 kg Transport size: 1250 H x 1200 W x 800 D mm Working height: 800 - 1020 mm, adjustable Power supply: Air, up to 10 bar / 145 Psi Working pressure: 6 - 8 bar User-friendly and safe two hand control Strong and long-life design High-performance pneumatic cylinder Ball bearing roller guides Adjustable working height Low noise level by silencer Air quick connector A quality product “Made in Germany” Dksdpe Ry Hujfx Aqvsn Suitable for doubling and tripling Second-hand tyres Optional extras Machine colour RAL BTS-MF550HD Scrap Tyre Baler Demo-Video shows BTS-Tyre Packing Machine Gen.1, the BTS-Tyre Packing Machine Gen.2 operates on same way. Tyre packing machine, Tyre triple machine, Tyre double machine, Tyre doubler, Tyre tripler, Tyre packer, Tire packing pachine, Tire tripling machine, Tyre doubling machine, Tire doubling machine

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 35800DNU8, power of the servo motor: 520 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, For sale is a Union Special 35800DNU8 feed-off-the-arm industrial sewing machine, offered as a complete workstation with binder and external puller. This heavy-duty unit is designed for continuous seam operations, edge binding, and reinforcement stitching in denim, workwear, and technical textile production. The feed-off-the-arm construction enables efficient handling of tubular garments such as sleeves and trouser legs. The machine is equipped with a high-quality Efka electronic motor and control system, providing precise speed control, needle positioning, and reliable performance in industrial environments. The unit has been used in professional production and was fully operational prior to factory shutdown. Serviced on 27.02.2026. Key features: • Feed-off-the-arm design for tubular and long seam operations • 3-needle chainstitch configuration (35800DNU8) • Binder/folder attachment for edge finishing • External motorized puller for stable material feed • Efka electronic drive system with precise control • Pneumatic functions for automated operation • Heavy-duty industrial construction Includes: • Union Special 35800DNU8 sewing head • Binder / folder attachment • External puller unit • Efka motor and control system • Industrial table and stand • Foot pedal • Thread stand • Pneumatic components Technical details: • Manufacturer: Union Special Corporation (USA) • Model: 35800DNU8 • Machine type: Feed-off-the-arm industrial sewing machine • Stitch type: Chainstitch (3-needle) • Motor: Efka electronic servo motor • Control: Efka control unit • Voltage: 230V • Pneumatic system required Dkedpfx Ajy Ipy Aeqvon Condition: • Used industrial condition • Fully operational prior to shutdown • Serviced on 27.02.2026 • Typical signs of use • Sold as-is, where-is, without warranty Typical applications: • Edge binding • Reinforcement seams • Denim and workwear production • Technical textiles • Long continuous seam sewing Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container. Dkjdswfq T Sspfx Aqvon

Condition: new, functionality: fully functional, power: 300 kW (407.89 HP), overall weight: 65,000 kg, tire size: 6*2, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 3 axles, emission class: euro3, Year of construction: 2026, machine/vehicle number: V9638J96, Equipment: all wheel drive, hydraulics, onboard computer, Sand and Gravel Production Plant | MINGYUAN Heavy Industrial Equipment A sand and gravel production plant is an integrated system designed for producing high-quality construction aggregates, including sand, gravel, crushed stone, and artificial sand. MINGYUAN provides complete aggregate crushing and screening solutions for quarries, mining, construction, and infrastructure projects, ensuring efficient material processing and consistent output. General Introduction The MINGYUAN sand and gravel production line combines advanced crushing, screening, washing, and conveying equipment to process raw materials such as limestone, granite, basalt, river stone, and quartz into various sizes of construction sand and gravel aggregates. The plant typically includes jaw crushers, impact crushers, cone crushers, vibrating screens, sand washers, belt conveyors, and dust collectors, forming a complete and automated production system. It is widely used in road construction, concrete batching plants, building materials, and hydropower projects. Capacity range: 30–1000 tons per hour (customizable) Feed size: ≤800 mm depending on crusher type Output size: 0–5 mm (sand), 5–10 mm, 10–20 mm, 20–40 mm (gravel) Main equipment: Jaw crusher (PE/PEX series), cone crusher, impact crusher, VSI sand maker, vibrating feeder, vibrating screen, sand washing machine, belt conveyor, and control system Power configuration: Electric or diesel-driven options available Automation: PLC control with real-time monitoring and adjustable output ratio MINGYUAN Heavy Industrial Equipment Co., Ltd. provides complete sand and gravel production solutions with reliable performance, competitive price, and professional after-sales service for global customers in the mining, construction, and cement industries. 2. Crushing and Screening: - The extracted raw materials often need to go through crushing and screening processes to reduce their size and separate them into different grades. - Crushers break down large rocks into smaller pieces, and screens sort the particles based on size. 3. Washing: - Washing is a common process to remove impurities such as clay, silt, and dust from the raw materials. This is particularly important for sand and gravel used in construction. 4. Grading and Sorting: - After washing, the materials may go through grading and sorting processes to separate them into different sizes and qualities. 5. Storage and Stockpiling: - Processed materials are often stored in stockpiles for further use. Adequate storage facilities are necessary to manage different grades of materials. 6. Conveying and Transportation: - Conveyor systems are used to transport materials between different stages of the production process. Transportation methods, such as trucks or conveyor belts, are used to move the final products to distribution points. Dsdeq Nia Iopfx Aqvskn Keywords Sand production line, gravel production plant, aggregate crushing plant, stone crusher, sand making machine, sand washer, vibrating screen, jaw crusher, cone crusher, impact crusher, VSI crusher, quarry equipment, mining machinery, construction aggregates, artificial sand, crushed stone, river gravel, limestone crusher, basalt crusher, granite crusher, sand washing plant, screening plant, conveyor system, MINGYUAN sand plant, aggregate processing equipment, stone crushing line, sand and gravel washing system, high-efficiency crusher, environmental sand plant, aggregate production line manufacturer.

Condition: new, functionality: fully functional, power: 210 kW (285.52 HP), fuel type: electric, color: silver, overall weight: 27,000 kg, empty load weight: 27,000 kg, operation weight: 36,000 kg, maximum load weight: 50,000 kg, tire size: 6*2, tire condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, machine/vehicle number: MYM-J57C90, Equipment: hydraulics, low noise, rubber tracks, Mobile Crusher: Smart C&D Waste Recycling Solution Turn Demolition Debris into Profit Construction and demolition waste accounts for 30-40% of global waste. Our mobile crushing solution processes C&D waste on-site, transforming costly debris into valuable recycled aggregates. Technical Specifications 900×1060 Mobile Jaw Crusher Crusher Unit: Dsdpfx Aqoq Nf Tvovjkn Jaw opening: 900mm × 1060mm Max feed size: 750mm Output size: 75-200mm (adjustable) Capacity: 80-180 TPH Power: 90-110 kW Vibrating Screen: 2-deck or 3-deck configuration Screen area: 3.6-4.8 m² Motor power: 15 kW Produces 3-4 aggregate sizes simultaneously Feeder: Belt width: 1000mm Variable speed: 0-25 m/min Power: 7.5 kW Hopper capacity: 5-8 m³ Overall: Dimensions: 12-14m (L) × 2.8-3.2m (W) × 3.8-4.2m (H) Weight: 38-45 tons Total power: 120-150 kW Fuel consumption: 25-35 L/hour (diesel option) What We Process ✓ Concrete (plain & reinforced) ✓ Asphalt pavement ✓ Bricks and masonry ✓ Tiles and ceramics ✓ Mixed demolition debris ✓ Road construction waste Complete Recycling Process 1. Feeding Large hopper (5-8 m³) receives mixed C&D waste up to 750mm 2. Primary Crushing 900×1060 jaw crusher reduces material to 75-200mm with 4-6:1 reduction ratio 3. Magnetic Separation Automatic removal of steel rebar (>95% recovery rate) 4. Screening Multi-deck screen produces multiple grades: 0-5mm (sand) 5-10mm 10-20mm 20-40mm 5. Dust Control Integrated water spray system (8-12 nozzles) achieves >90% dust suppression Key Features Mobility: Track-mounted: Self-propelled, 0.8-1.2 km/h Wheel-mounted: Highway transportable Setup time: 30-60 minutes 360° working radius Automation: PLC control system Remote operation (50m range) Real-time monitoring Automatic overload protection Performance: Concrete: 120-150 TPH Asphalt: 100-130 TPH Mixed waste: 80-120 TPH Screening efficiency: >95% Output Products Recycled Aggregates: 0-5mm: Concrete, mortar (15-20% output) 5-10mm: Asphalt mix, drainage (20-25%) 10-20mm: Concrete, road base (25-30%) 20-40mm: Sub-base, backfill (25-30%) Applications Building demolition Highway reconstruction Bridge dismantling Airport runway recycling Disaster debris management Urban renewal projects Service Package Included: Factory testing Installation supervision Operator training (3-5 days) 12-month warranty Lifetime technical support Spare parts availability Get Started Transform C&D waste from cost to profit. Our 900×1060 mobile crusher delivers proven performance, exceptional ROI, and environmental sustainability. Contact us for: Detailed specifications Custom configurations Site assessment Equipment demonstration Competitive quotation Make waste work for you. Choose proven mobile crushing technology for sustainable C&D recycling.

Condition: new, Year of construction: 2026, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. 3. Conveyor Systems: Dkodeq N Ud Iopfx Aqvon - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Condition: good (used), Used Thetford International T3 waste compactor. Dkjdpfx Aqohvi Ahovon

Condition: used, Year of construction: 2021, Veolia Waste Water Treatment Spare Parts Package (Unused 2021) 2 x Alfa Laval Aldec 45 centrifuge (decanter) Process Application description: IW - waste water Process description: MUE, Biological sludge dewatering Max. density of compact wet cake: 1.3kg/dm3 at max. 4200rpm Bowl Maximum main speed:4200rpm Bowl diameter: 360mm DNF unit - upper tank - PPM 200CE - A DNF unit - upper tank - PPM 200CE - B 4x filter for Mn removal 3x reverse osmosis (RO) skid 3x powder activated carbon (PAC) dosing unit - Rittal JB 2x DNF unit - poseipump unit 3x unit blower ES145/5P-RVP300-spec 6x front filter Mn removal 2x DNF unit - recirculation pipe Dkjdpfjzb N Hhjx Aqven Spare parts can be seen in the asset list upon request. Please note pictures are representative and not of actual items Note: Sales are conditional upon the satisfactory completion within 24 hours of conditional sale of a Business Partner Due Diligence Check (BPDDC) and an End User Statement for (EUS) by the buyer, and, if the buyer is not the end user, for each end user.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Dkjdozbxyqopfx Aqvjn Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, For sale is a partially refurbished Presona baling press, with 50 t pressing force, 22 kW drive power, built in 2005 Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Dodezbxxaspfx Aqvokn Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, For sale is a complete Bollegraaf baling system consisting of conveyor technology, baling press and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: Dkodpfx Aqezbxw Ajvsn The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Dkedpfjzbxwiex Aqvjn Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: good (used), Year of construction: 1994, load capacity: 1,250 kg, lifting height: 4,150 mm, fuel type: electric, mast type: triplex, empty load weight: 1,300 kg, obtained through trade-in: Electric three-way reach truck Brand: BT Year of manufacture: 1994 In good condition Lifting height: 4,150 mm Capacity: 1,250 kg Dsdpfx Aeza Dy Hoqvjkn Mast height (with load): xxx Battery With external charger Watch the video on YouTube

Condition: used, mileage: 992,000 km, power: 375 kW (509.86 HP), first registration: 07/2015, fuel type: diesel, overall weight: 27,000 kg, axle configuration: 3 axles, next inspection (TÜV): 07/2026, color: green, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, Information in English: DAF XF 510 - FAN SALES UNIT - FULL AIR SUSPENSION - THROUGH-LOAD SYSTEM - SPECIAL CABIN HEATER - DHOLLANDIA TAILGATE Body: Insulated flower transport van, Van Beurden Kerkdriel Date of first registration: TÜV (technical inspection) valid until: ? 2026 Tacho (tachograph) valid until: 12 - 2026 Mileage: 992,000 km Engine power: 375 kW (510 hp) Transmission: Automatic Internal dimensions (L x W x H): 830 x 250 x 280 cm External dimensions (L x W x H): 16 x 260 x 400 cm Wheelbase: 670 cm Unladen weight: 14,055 kg Payload: 12,945 kg Permissible total weight: 27,000 kg Color: Green Suspension: Air suspension (front), Air suspension (rear) Dksdpozb T Ezjfx Aqvjn Emission class: EURO 6A Axle configuration: 6x2 Front axle tires: 385/55 R22.5 L40% R40% Drive axle tires: 315/70 R22.5 L40% R40% Trailing axle tires: 385/55 R22.5 L30% R30% Tail lift: Dhollandia 1,500 kg under-ride guard lift Heating: Hot air heater Cab type: Sleeper cab Extras: Special interior design by Royal Class, London system (cameras and sensors), air conditioning, full air suspension, luxury seats, radio/CD player, roof spoiler and fender extensions, fully insulated Van Beurden Kerkdriel cargo box, side door with folding steps, hot air heater with temperature display in the cab, 4x floor/ceiling rails, 1,500 kg Dhollandia under-ride guard tailgate, trailer coupling, steered rear axle, refrigerator, Smart Tachograph 2, various cameras, etc., etc., etc. Can be delivered with: 2-AXLE FLOOR TRAILER - VAN BEURDEN KERKDRIEL BODY - DHOLLANDIA TAIL LIFT Body: Insulated flower transport van, Van Beurden Kerkdriel Date of first registration: - TÜV (technical inspection) valid until: ? 2026 Internal dimensions (L x W x H): 760 x 250 x 267 cm External dimensions (L x W x H): 981 x 260 x 400 cm Wheelbase: 181 cm Unladen weight: 7,670 kg Payload: 8,330 kg Permissible total weight: 16,000 kg Color: Silver Suspension: Air Brakes: Drum brakes Axle configuration: 2 axles Tire axle 1: 275/70 R22.5 L20% R20% Tire axle 2: 275/70 R22.5 L20% R20% Tail lift: Dhollandia 1,500 kg under-ride guard lift IMMEDIATELY AVAILABLE AND READY FOR USE! Further information: * Payload: 13,045 kg * Type | First axle: Continental R * Tire size | First axle: 385/55 rf22.5 * Tire tread depth inner left | First axle: 40% * Tire tread depth inner right | First axle: 40% * Maximum axle load | First axle: 8,000 kg * Type | Second axle: Continental R * Type | Third axle: Continental R * Tire size | Second axle: 315/70 R22.5 * Tire size | Third axle: 385/55 R22.5 * Tire tread depth outer left | Second axle: 40% * Tire tread depth inner left | Second axle: 40% * Tire tread depth inner left | Third axle: 40% * Tire tread depth outer right | Second axle: 40% * Tire tread depth inner right | Second axle: 40% * Tire tread depth inner right | Third axle: 40% * Maximum axle load | Second axle: 11,500 kg * Maximum axle load | Third axle: 7,500 kg * Wheelbase: 670 cm * Tail lift | Manufacturer: DHOLLANDIA * Tail lift | Load capacity: 1,498 kg * Price on request: Yes * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Steering | First axle: Yes * Brand | Third axle: Other * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Lift axle | Third axle: Yes * Twin tires | Second axle: Yes * Driven | Second axle: Yes * Steering | Third axle: Yes * Differential lock | Second axle: Yes

Condition: good (used), Year of construction: 2014, Large waste compactor / cardboard press, Höma, – used: Price at location: only €18,950 (net) for self-dismantling! Manufacturer: Höma Type: PB4000 Year of manufacture: 2014 Machine number: 140409 Weight: 1,200 kg Pressing force: not specified, but we estimate 40 tons. Dedpfxozbyf Ij Aqvekn The press has a second discharge chute. Price includes a small crane with trolley. 30 kW Condition: good Available: from Q4/2026 Location: Hamburg For an additional charge, a conveyor system for empty cardboard boxes, over 100 m long, is available! Photos at the end of the advertisement!

Condition: good (used), Special tool Moto Guzzi Suzuki Aprilia with perforated wall system dismantled ready for loading invoice with VAT shown Djdotvfd Dopfx Aqvekn

Condition: used, mileage: 847,500 km, power: 552 kW (750.51 HP), first registration: 12/2015, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, crane, electric window regulation, fog lights, parking heater, power assisted steering, power mirror, spoiler, = Additional options and accessories = - Air horn - Air suspension - Alloy wheels - High Beams Dkodjzbmqwspfx Aqvjn - Immobilizer - I shift - PTO - Radio CD player - Refridgerator - Roof Spoiler - Sleeping cabin - Speed limiter - Sper - Toolbox = Remarks = Volvo FH750, 29-12-2015, 847500 km, Euro 6, 6x4, I-Shift, Dynamic steering, Loglift loading crane (2007) = More information = Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels GVW: 29.000 kg Crane: year of manufacture 2007 Extendable superstructure: Yes = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, Year of construction: 1983, total width: 750 mm, total height: 900 mm, total length: 2,400 mm, Empty weight: 500 kg Dkedpfsxalyyox Aqven - Year: 1983 - Documentation available: No - CE certificate present: No - Transport dimensions: 2400mm x 750mm x 900mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 1997, condition: excellent (used), Waste-box collector, waste collector, blower, fan, filter system, radial fan, dust extraction blower, fan, extraction, dust blower, extraction, dust blower, extraction system, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan -Dust extraction blower: with filter gases -Monitoring device: for the amount and quality of waste in the waste suction system -for sampling: on teasels or cleaners -Motor power: 2.2 kW -Speed: rpm Dkodpfx Aey Uxmxeqvjn -Inlet connection: 1x Ø 300 mm, 2x Ø 100 mm -Dimensions: 1200/800/H1700 mm -Weight: 248 kg

Condition: excellent (used), Year of construction: 2010, 1" image sensor, 6.6 megapixels, CMOS Double telecentric lens Z-axis travel distance 30 mm Dksdpozb R Imjfx Aqvjn Z-stage maximum load 3 kg

Condition: new, empty load weight: 3,030 kg, maximum load weight: 14,970 kg, overall weight: 18,000 kg, tire size: 385/55 22,5, tire condition: 100 %, axle configuration: 2 axles, wheelbase: 6,260 mm, color: black, driver cabin: day cab, emission class: none, suspension: air, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, Equipment: ABS, Reference number for inquiries: 341127 Koegel, ZW18 - 19.5 * Year of manufacture: New vehicle * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Tandem axle trailer * 7.15 * 7.45 * 7.82 * 15-pin connector * Lifting/lowering device * Miscellaneous, Other * Suspension: Air * Gross weight: 18,000 kg * Unladen weight: 3,030 kg * Payload: 14,970 kg Dodpfxey N Nl Uj Aqvekn * Permissible total weight: 18,000 kg * Axle manufacturer: SAF * Tyre condition 1st axle: 100% -- 100% - Tyre size: 385/55 R22.5 * Tyre condition 2nd axle: 100% -- 100% - Tyre size: 385/55 R22.5 * Wheelbase: 6,260 mm * Tyre sizes: 385/55 R22.5 * Koegel ZW 18 - 195 new vehicle without initial registration * Available immediately * Ride height: 1,070 mm * Lift height: 1,030 - 1,420 mm * Coupling height: 400 mm * Compatible with swap bodies C715, C745, C782 + 20' ISO container * Extendable drawbar * Tyres: 385/55 R22.5 * Unit price: €16,500 net * Construction specification available on request Disclaimer: Subject to change, prior sale, and errors excepted. Further images and videos can be found on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Handling of all (export) documentation * Ordering of export or customs number plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV inspections, registration service * Transfer of commercial vehicles Contact our trained specialist staff – we will be happy to advise you.

Condition: new, empty load weight: 3,030 kg, maximum load weight: 14,970 kg, overall weight: 18,000 kg, tire size: 385/55 22,5, tire condition: 100 %, axle configuration: 2 axles, wheelbase: 6,260 mm, color: black, driver cabin: day cab, emission class: none, suspension: air, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, Equipment: ABS, Reference number for inquiries: 41126 Koegel, ZW18 - 19.5 * Year of manufacture: New vehicle * ABS, Anti-lock Braking System Dkodpfx Asy N Nlusqvjn * EBS, Electronic Braking System * Air suspension * Tandem trailer * Internal lengths: 7.15 / 7.45 / 7.82 m * 15-pin connector plug * Lifting and lowering mechanism * Miscellaneous, other * Suspension type: Air * Gross weight: 18,000 kg * Unladen weight: 3,030 kg * Payload: 14,970 kg * Permissible gross weight: 18,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 100% -- 100% | Tire size: 385/55 R22.5 * Tire condition 2nd axle: 100% -- 100% | Tire size: 385/55 R22.5 * Wheelbase: 6,260 mm * Tire size: 385/55 R22.5 * Koegel ZW 18-195, brand new, never registered * Immediately available * Ride height: 1070 mm * Lifting height: 1030 - 1420 mm * Coupling height: 400 mm * Swap body compatible: C715 + C745 + C782 + 20' ISO container * Length-adjustable drawbar * Tires: 385/55 R22.5 * Net unit price: 16,500 EUR * Technical specification sheet available on request Disclaimer: Specifications subject to change, prior sale, and errors excepted. More photos and videos available on our website. Our comprehensive services include: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Processing of all (export) documents * Ordering of export / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transportation of commercial vehicles Please contact our trained specialists. We are happy to advise you.

Condition: new, empty load weight: 3,030 kg, maximum load weight: 14,970 kg, overall weight: 18,000 kg, tire size: 385/55 22,5, tire condition: 100 %, axle configuration: 2 axles, wheelbase: 6,260 mm, color: black, driver cabin: day cab, emission class: none, suspension: air, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, Equipment: ABS, Reference No. for inquiries: 41127 Koegel, ZW18 - 19.5 * Year of manufacture: New vehicle * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Tandem trailer * 7.15 * 7.45 * 7.82 * 15-pin connection plug * Lifting and lowering device * Other, miscellaneous * Suspension: Air * Gross vehicle weight: 18,000 kg * Unladen weight: 3,030 kg * Payload: 14,970 kg * Permissible total weight: 18,000 kg * Axle manufacturer: SAF Dsdpfx Aqey N Nlzevekn * Tire condition 1st axle: 100% -- 100% - Tire size: 385/55 R22.5 * Tire condition 2nd axle: 100% -- 100% - Tire size: 385/55 R22.5 * Wheelbase: 6,260 mm * Tire sizes: 385/55 R22.5 * Koegel ZW 18 - 195 new vehicle without first registration * Immediately available * Ride height: 1,070 mm * Lift height: 1,030 - 1,420 mm * Coupling height: 400 mm * Swap body: C715 + C745 + C782 + 20’ ISO container * Length-adjustable drawbar * Tires: 385/55 R22.5 * Unit price: €16,500 net * Construction description available on request Disclaimer: Subject to change, prior sale, and errors excepted. More photos and videos are available on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing * Assistance with all (export) documentation * Provision of export license plates / customs plates * Vehicle reconditioning: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration services * Transfer of commercial vehicles Consult our trained specialist staff – we are happy to assist you.